Incoming calls and sending interrupted when the helmet was in my pocket...

Similar Questions

• Asked to make calls and send pictures at the same time. Possible?

  Hello

  its my first post here. I have very little experience working with BlackBerry. I've been playing with 9800 Simulator and some samples provided with IDE 6.0, I serched for slution to my problem with no luck.

  My question is: is at - there a Posibility to make an app, that would have a built-in single-list contacts with multiple phone numbers, will allow to call (with a built-in list contact phone numbers by pressing a button) and take pictures and email them during this call?

  App like this is a request for a doctor - it needs to be as user-friendly as possible, the person who has never used a Blackberry phone should be able to make calls and send photos. The idea is that a doctor during a call with another doctor would be able to take a picture and send it to the person he calls (or other) in order to consult.

  If my explanations are confusing, I will try to write differently.

  Thanks in advance.

  I am not the best person to answer, but if I understand correctly, simultaneous data and voice is possible, but depends on carrier and the type of wireless connection you - I think you need 3 g to do. With this reservation, it seems possible to what you are suggesting.

• When I try to send an attachment with a PDFor JPEG, the indicator "sending" appears and never indicates that the document was "sent". He did not finish the task.

  When I try to send an attachment with a PDF or JPEG, the indicator "sent" is displayed and never indicates that the document was "sent". He did not finish the task.

  You have security software that may block the download?

• The iphone 6 s there a tone to let me know that I have an incoming call while I talk on the phone

  New for iphones.  One of the things that miss me is a tone/tone, over the ear speaker, while I'm talking to someone to let me know I have an incoming call.  Miss me calls important reason of not having something to let me know I have a call and need to switch.  The same applies if I call someone.  I use to get the same/beep to let me know that this person was on the phone with someone else.  Is there a setting to activate an audible notification while I talk on the phone?

  This is not a feature of the phone, it's a feature of the carrier. Check with your carrier and see if call waiting is activated on your account. In this case, you will get an alert when there is another incoming call.

  Even when to call someone else, a sound signal will be added to each ring, but again, the carrier provides this functionality, not the phone.

• Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

  Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

  While driving, I noticed that all the comments navigation are also sent to my phone, creating a distraction while driving. Is there an automatic way to stop sending alerts to my watch whil the iPhone is also connected to Carplay?

  If this is not the case, consider this as your comments/request. If there is, please share. I do not want to switch manually and on all notifications when you use Carplay.

  Best regards

  Q

  Hello

  It may help to place your watch in mode do not disturb before driving:

  -On your watch: when the time display, drag upward on the dial of the watch > drag left/right to the gaze of settings > tap the moon to turn do not disturb on and outside.

  You can also disable mirroring for do not disturb mode. When mirroring is enabled, turning on do not disturb on your watch also automatically her allow on your iPhone.

  -On your iPhone, in the application of Eve, go to: Watch My > General > do not disturb - turn the market / stop iPhone mirror.

  To send comments and/or service requests to Apple, you can submit the form here (all comments are read):

  https://www.Apple.com/feedback/watch.html

  (This is a supportive community focused on user - you don't talk to Apple here).

• I used chkdsk after trying to do a defrag and send a message that there was an error on the disc.

  original title: computer Dead after chkdsk

  I used chkdsk after trying to do a defrag and send a message that there was an error on the disc.  Asked me to use chkdsk after a statup as a volume is in use.  I did it but when I went through the suite, the computer was completely dead.  I think I gave the wrong settings of the chkdsk command.  How can I get my computer operational again?  I use Windows XP

  What do you mean by 'completely off '?  Is - literal?  All in all, nothing happens when you restart the computer?  No noise?  No fans? No beeps?  No video, no BIOS or POST information appear?

  John

• Get the name of the caller from an application when the Crier - executing.

  Hi all

  Here, I'll be back with a new problem which goes as follows:

  Suppose that my xyz application stores some contacts (just like in the book addresses/phone book).

  Other contacts are by default stored in my Blackberry address book.

  Suppose I get a call on the handset with my app xyz running in background. All I need is to retrieve the name of the caller of the xyz application and view this name as"Akash Calling... ' instead of '+ 919999999788 calling... ". "assuming that the caller details are present in the said application, his name and none of the details in the actual address book. Is it feasible. If so, please suggest.

  Thanks in advance!

  everything in that this is done incoming call:

  1. you retrieve the number of the caller in the earpiece of the phone

  2. you get the name that corresponds to this number in the background application

  3. you create an entry in address book with this name and number

  After callIncoming is executed, the system call screen is displayed. The phone app checks if it can find the number in the address book. It finds the number and displays the name.

  After that the call is accepted or rejected remove you the address book entry.

• Calling a function only when the State is active

  I turn to find the event just to call a function only when the status is active. In fact, I created a State to display the 'product details' click and once the system changes to this State - I have to perform a function.
  
  Here's the context:
  
  Let's say that you are on the home page where you will need to click on a product to see details. By clicking on the product, the State to view the details of the product will be activated and a variable inside the new state you will receive all the data (from the class of product). But I discovered Flex run all States at the beginning and we need to watch how declare our function to make sure that we do not have a null to a variable/object reference. Given that value is moving to the State only when the click event to occur, the process of globalization, execution of all States at the beginning will not have any value yet (for the specific product to deal with in the State of the productDetails). So I can't use creationComplete to perform a simple function like setSpecs(), where all the values (for example, width, height, circumference, diameter, price, etc.) will be instiate specific labels.
  
  What event to use to call a function internal once we are in the State? Just using the creationComplet and stated if he check the currentState = that I have to work on is not enough. I tried 'activate', 'show', 'enterStage' and many others, but without success. I tried to search the Internet, but it seems that this problem is not popular enough to generate sufficient results.
  
  But I know that it is possible in the case otherwise it will be is not logical and since Flex work very well with the event, I found the right event. It's something basic I know, but when you do not know, it seems difficult to find! ;-))

  Thanks Greg!

  I agree, this is a better method. So I'll change my SENSITIVITY to use viewStack instead of the State. But the problem persists what that, if we use the viewStack State to launch an event only when the State/viewStack is displayed on the screen.

  I found something that works very well for me: updateComplete.

  First of all, I found this before reading your information about viewStack so it worked very well for the method of the State. That I decided to do a test to viewStack and made the necessary changes to the code to reflect a viewStack navigation and make sure the updateComplete was not within my component (stateProduct.mxml). The system was not able to view the specification as the setSpecs() function was not instantiate when displayed. I added the updateComplete = "{setSpecs ()} ' and everything worked great!" So I conclude that no matter if you are using a viewStack State, the updateComplete event can be used to run or functions only when the component is displayed on the screen.

  Now, I have to make my transition between the State working with viewStack effect! ;-))

  Thanks to Greg for this useful tip!

• Dell XPS 15z: "your battery is temporarily disabled. If please shut down your computer and try again when the unit is in the operating temperature"

  Hello

  last night, I was working on my laptop, I realize that my battery is low. so I put for loading... after a while, I realized that the battery is 75% charged so that I disconnect it. and my laptop turns off.

  the laptop refused more late start... therefore I reconnected it the charger and the laptop turned on with the light that displays the State of charge (white light near the intersection of the keyboard screen) starts to blink in a cycle of 5 times... 4 times orange and 1 white time... and this cycle continues until I use the laptop.

  and this message when I go to THE BATTERY option "your battery is temporarily disabled. Please shut down your computer and try again when the unit is in the operating temperature"my cell phone is outta warranty... what should I do? kindly help

  hchentanshankar,

  Welcome to the community.

  I am sorry to read that you are experiencing this issue.  The battery is likely guilty, but you should check to see if there are any problems with the laptop or AC adapter / CC before you rush out and replace the battery.

  I would start by checking the bios, boot the system by pressing F2 to enter the bios, you can also press F12 and select the bios menu.  Once in the bios look for the option for AC adapter warnings, if they are disabled they can and save the changes. If there is a problem with the adapter, you should start getting errors on the adapter.

  If the adapter seems well, disconnect the battery from the system and turn off the laptop.  Wait an hour or two and then replace the battery and restart the system and see if you continue to get the message.   If you can run the laptop on battery only to leave the battery completely and then load it again and see if the problem returns.

  I know that this may not be possible before you buy a new battery but if possible try a power adapter and the battery and see if the problem persists.  In this way, you can know if the problem follows the laptop battery or the AC adapter.

  Please let me know what you find.

  TB

• We were members of creative cloud and when the membership was to be renewed, we asked one month free. This leads to 2 accounts creative cloud on our page... a renewed and paid for and the other related to the temporary use.  How to get rid of the tempo

  We were members of creative cloud and when the membership was to be renewed, we asked one month free. This leads to 2 accounts creative cloud on our page... a renewed and paid for and the other related to the temporary use.  How get rid of the temporary use of a month?  They both have the same ID and both appear on the administration page.  Thank you.

  Please contact customer service to get this resolved.

• Cannot install adobe creative suite 6, do not load and install further when the second cd is inserted (zip also does not work)

  Cannot install adobe creative suite 6, do not load and install further when the second cd is inserted

  This question is unanswered.

  artistichooves artistichooves February 6, 2014 06:31

  I've only had 3 programs installed with the two cd I got with my adobe creative suite 6 (edition education, student and teacher)

  It didn't load any further when I insert the second cd. (tried several times) on my windows 8.1

  I got a license number, but it does not work on the creative cloud

  I tried to download the zip file, but it did not work

  I have ragequited (sorry)

  and now I want to try again.

  -J' have the license but I can't use my cd or download the zip

  -are there a cd I can buy again or something?

  It seems that my series works more :/

• How to know when the iphone was made.

  I was wondering if you know when the iphone was made because my iphone 5's battery keeps dying pretty quickly

  and online on Apple.com it says that some iphone 5 s batteries would be replaced because of defective made batteries.

  Thank you

  The battery replacement program is for iPhone 5, iPhone 5 s no

  https://www.Apple.com/support/iPhone5-battery/

• Is there a way to tell when the bin was emptied last?

  Is there a way to tell when the bin was emptied last?

  Open a new Finder window. The display in the FInder menu, select Customize toolbar... Drag / move the icon to get information from the right toolbar on the left of the existing action button. Click done in the personalization Control Panel and close the window of the Finder. This Get Info button will also be useful for selections of files.

  

  OS X does not connect to an event to empty the trash. You can click on the trash icon in your Dock, and if the Recycle Bin has been emptied recently, you'll be watching an empty Finder window. Now, you can click on this button to obtain information about the toolbar, and the displayed change date will be when the Recycle Bin has been emptied. If you add more items to the trash, this date modifed will be when the last element has been added.

  

• pavillion17: How do I know when the laptop was made

  I was wondering if the laptop that I just bought is a current model or a THST was manufactored earlier and maybe technologically as along a life. You know say manufactored a few years but not til now so its new, but perhaps not as common, sold as an act of that year and sold now no matter how to kn where and when it has been implemented

  Hello:

  As far as I know, all portable HP are assembled in China.

  The serial number will provide the year and week of manufacture...

  For the serial number, the classic format is to have the 4th, 5th and 6th characters of reference when the product was built.  The fourth character is the date of the year (Y) and the following two (WW), the week this year, it has been made.

  CCSYWWZZZZ

• How to find when the row was inserted? (timestamp)

  This has been asked several times, but is at - he new methods to find out the time when the row was inserted?

  I tried to find out using ORA_ROWSCN. But his is not accurate. It shows the update, I believe and do not show the dose if the line is inserted before long.

  Previous designers thought that it is not necessary to include the Date added and updated the columns when they were designing the database.

  This has caused a lot of problems when it comes to analyzing data and verification.

  Please help, this would make my day.

  Thanks in advance:

  Dbms_logmnr can signal when INSERTING; If the archived REDO log file exists