Similar Questions

• "The parameter is incorrect" Error Message is displayed on the computer

  I'm running Windows 7 Home Pro on an Asus laptop and recently decided to add my old printer USB, HP Oficejet v40, to our network via a print server, LPR Networking USB wireless home. The Installer seems to fill correctly, and my printer appears in the list of available network printers (I alone). However, when I try to print wireless, I get one or more error messages. The first and the most persistent are: a StartDocPrinter call was not issued. Sometimes (not always) this is accompanied by another popup error: the parameter is incorrect. In each case, the document I am trying to print is no longer in effect. My USB utility Server network sometimes prints, and sometimes it is available. Running the printer troubleshooter cannot correct the problem (s) and always results in the following error: printer HP Officejet V40-P05d0443eb can be contacted via the network. If I connect the printer directly to my laptop, USB port, it prints as expected.

  The print driver is up-to-date. I tried to uninstall and reinstall the printer and print server and have also tried to reset the print server and the router, to anything will do. Any help to fix these problems is greatly appreciated!

  Original title: error: A StartDocPrinter call was not issued.

  Hello

  Thanks for posting your query in Microsoft Community.

   

  You can consult the following articles and check if they help:

  Wireless printing Center Resolution of problems
  http://WWW8.HP.com/us/en/campaigns/wireless-printing-Center/Troubleshooting.html
   
  "The parameter is incorrect" Error Message is displayed on the computer
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c03283238

  For the error: "the printer cannot be contacted over the network",
  refer to suggestions provided by Meghmala responded on May 28, 2010.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/printer-cannot-be-contacted-over-the-network-error/a4318308-3D16-44D4-bac8-7fdd10a83208
   
  Hope this solves the problem. If the problem persists, you can write back to us and we will be happy to help you further.

• Incorrect error message in < af:inputText >

  Hello
  
  I use JDeveloper 11.1.2.3.0 Release 2.
  
  While the converter on < af:inputText >. Converter is "javax.faces.Integer".
  
  Although I type a few tank in the fields it display message:
  

  Error: The value is not the in correct format. 
    Enter a value that matches this pattern: {2} 

  ' * The value is not in the correct format in * "is incorrect.
  
  Is someone can you please tell me how can I change method defined by the ADF. I want to show the messages below:
  

  Error: The value is not in the correct format. 
    Enter a value that matches this pattern: {2} 

  Thanks in advance.

  Hello!

  You can check below links to get any clue

  http://StackOverflow.com/questions/12289965/Trinidad-custom-error-message
  Custom Message beam problem
  How to make the location of the default Tooltip illustrated by af:inputDate

  Nilum.

• How can I get the images to display in order of filename on my iPad?

  I have about 800 images I use in teaching Kinesiology, and their file names provide the structure (they are named by the chapter number then the image).  How can I get to display in order of file name in 'photos' on my iPad?

  Second, how can I check the file name while I look at the pictures (so I can see where I am in the bridge of 800 and also inform students what image I'm referencing)?

  Thank you!

  I'm sorry but there is no way to do this. The iOS system is currently not able. This article can help explain how iOS displays images.  Order of Photos in iOS

  The only alternative would be to create an Album in the Photos App (you can rearrange manually) or use a 3rd party App. None Displays the names of files. You may need a MacBook to do what you want.

• Mail not display messages after reconstruction

  Mail running on a macbook running 10.11.2, an e-mail account, a POP account has been rebuilt, now will not display messages on the server, only new messages.

  Hello.

  You must update to 10.11.3 first. This could he solve.

  If not, can you tell us the following:

  Still see the email subjects and dates? I mean, is that the body of the mails disappeared?

• gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the macbook pro battery retina start

  gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the start of the battery. This happens on macbook pro retina 13 inches

  When I try to startup macbook pro retina in battery mode, it will fail to start showing low battery level and an indicator to recharge the battery. It does not start on battery. When I then connect via the power cable at startup (and check the battery level), monitor of battery in the menu bar indicates that the battery is charged to the top.

  It gets really frustrating and remove my ability to use the macbook pro retina as a truly portable device...

  Appreciate any help on this

  Have you tried resetting the SMC? Reset the management system (SCM) controller on your Mac - Apple Support

• My Ipad displays message - iPad has not been saved in 25 weeks

  My Ipad displays message - iPad has not been saved on ICloud at 25 weeks.

  then, you should take device near a wifi network, so that it can be backup up to the icloud.

  Settings > icloud > storage and backup [to the end of the list]

  Check what your settings are.

  R

• My I Phone 6 s incorrect display of battery percentage? everyone knows the same problem?

  My I Phone 6 s incorrect display of battery percentage? everyone knows the same problem?

  Hello dipudivakar,

  Thank you for using communities Support from Apple!

  From your post, I understand that your iPhone displays a percentage of the battery which is incorrect. To resolve this situation, I would first of all turn off the option to display the percentage of the battery on your iPhone. If you need information about how to disable this feature, the following article explains this process.

  Display the percentage of the battery on your iPhone or iPad - Apple Support

  After you have enabled this feature, please reboot your iPhone by following the instructions in the next section.

  Restart your iPhone, iPad or iPod touch - Apple Support

  Once finished, restart, enable the option to redisplay the percentage of your battery and test the question.

  See you soon!

• When I try to open my homepage from Yahoo using Firefox I get a panel display message 'connection to the server was reset while the page is loading. Try again "#Cure please!"

  When I try to open my homepage from Yahoo using Firefox I get a panel display message 'connection to the server was reset while the page is loading. Try again "#".
  Cure please!

  Do you find it with other browsers?

  If not, then try asking using Firefox for a.

  That you get with other sites with Firefox?

• Security event log getting the message "local computer maybe not the files of the necessary registry information or message DLL to display messages from a remote computer" for all entries. System and application logs do not receive messages

  PC is Windows XP.  The server is Windows 2000.  I have administrative rights on both machines.

  On getting PC security event log do message "local computer, maybe not the files of the necessary registry information or message DLL to display messages from a remote computer" for all entries.  System and application logs do not receive messages

  Hi carmol,.

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the audience on TechNet forum.

  Please post your question in the Sub forum. Link: http://social.technet.microsoft.com/Forums/en-us/winserverManagement/threads

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I burned some media files on a DVD-R. However when I tried to burn another point, I have a display message asking me to format the drive.

  I have vista Home premium with IE9. I burned some media files on a dvd - r. However when I tried to burn another point, I have a display message asking me to format the drive. I do not understand what that the drive has been formatted. I know from a previous answer that I format the disk, then all the content wil be removed and so I don't want to do. But how do I continue to burn items on the disc. I know everyone is busy here, but I hope someone finds the time to answer. Thank you for being useful to me recently. sincere love to all,

  original title: reformatting a dvd - d

  Did you close (or complete) of the DVD when burn you first your files on it? If you do not email us any more data on DVD-R, you will need to use a second DVD-R disc.

• BlackBerry Smartphones Blackberry bold 9700 does not display messages

  My bb 9700 does not appear my messages. I tried to change the settings in my SMS Inbox to display messages and emails, but it does not work. Pls help

  What messages it is not displayed? SMS or Email?

• "User Id or password is Incorrect" error message

  I installed windows for mac on my ibook (with parallels desktop 7). When I open windows 7, it requires a user id and password. The problem is that I have not been given the opportunity to define a password. So that any password I have insert, the message error "id of user or password is incorrect" continues to reappear. As a result, I can't open Windows 7 in all. What should I do next?

  Hi, Kallen,

  Are there other users on the computer?  You can log in using their account

  This issue needs to be validated in the Mac/Parallels Forum

  Registry backup before using the solution given in the previous document

  Parallels and the administrator account

  http://forums.MacNN.com/t/317936/Parallels-and-the-administrator-account

  It is a doc of Vista.  See if the solution works

  Logon Vista and 'username or password incorrect' Error Message

  http://KB.parallels.com/5022

• I have the subscription for cc 499 plan /-h. I had trial version first. After 1 month of more than 499 /-deducted from my card. But displayed message that your trial version has expired. I can't solve this problem.

  I have the subscription for cc 499 plan /-h. I had trial version first. After 1 month of more than 499 /-deducted from my card. But displayed message that your trial version has expired. I can't solve this problem.

  Check your account indicates the subscriptions that you expect (and that the adobe, used in the next step id is correct) by logging in here and checking the status of your subscription, https://www.adobe.com/account.html

  then, if it's current, disconnect and then back to your client application using the adobe with the link above in cc id: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

• vSphere: incorrect display of ability Datastore

  Hello

  Today, a store of data in our virtual environment have a strange problem: incorrect display of ability in view vSphere Client. The correct capacity of the data store is 150 GB normally, but now I see it display 2126950.00TB (?). This issue of data store result in the failure of all virtual machines ran on that. I even worry about this issue because I am facing both of the fist. Please help me!

  Thank you

  This KB is probably can help you: VMware KB: 5.0 ESXi hosts fail to mount VMFS5 volumes that are formatted with TTY capabilities only.

  --

  Rocco Sicilia