Incorrect export format

Similar Questions

• Cannot save the incorrect date format

  I keep trying to save my computer... tells me incorrect date format?

  I had the same problem and ended up going through the online chat.  I guess there is a problem with the site, but they managed to sign up to my computer via chat.  Hope that helps

• Problem with the export format MXF OP 1A in after effects 2015

  I have a big problem, when I tried to export format MXF OP1a with XDCAMHA 50 PAL (4:2:2), that export us in our TV.

  I have a project of screening HDTV 1080 25, photo belowe setting parameters:

  

  But when I used to export format MXF OP1a (XDCAMHD 50 PAL (4:2:2)), came first this:

  

  WTF!

  When I clicked OK, problems biggin:

  

  Output modul said "Incompatibility of parameters", and when I click on yellow triangle warning arrive (photo at the top).

  WTF!

  I missed something. I did something wrong?

  Need help.

  This codec, XDCAM 50 PAL is a non square HD codec and the size of the image is defined by the codec. If you choose XDCAM EX you can get the square pixels, but you have a flow lower and 4:2:0 color. This is a limitation of the format XCCAM that you're stuck with.

  You can choose another format option. Most of them have predefined sizes. It just depends on what you're trying to deliver and to WHO. If it's for the broadcasters all have their own set of standards that should be followed.

• can I convert a pdf file in Greek in word with adobe pdf export format?

  Hello, how can I convert a pdf file in Greek in word with adobe pdf export format?

  Hi Benjamin,

  Greek is not one of the languages supported for OCR by ExportPDF, but it is in Acrobat. You can try Acrobat for free for 30 days, if you wish. See www.adobe.com/products/acrobat.html for more information.

  Best,

  TA5

• H.264 + Minnetonka export format over-codes for Dolby

  I noticed that it is only possible to select the surcode 5.1 Minnetonka in the export format "H.264 Blu - ray".

  However, I would use the export format "H.264" (because I want to use the 50 frames per second).

  Is it possible to use the 5.1 Minnetonka. SurCode in combination with this setting of 50 fps 'H.264 '?

  To the extent that I couldn't find it.

  Thank you.

  Set of multiplexing voice against zero, then in the tab audio select Dolby Digital, and over-codes.

• Impossible to download CVT and PDF format files-An incorrectly get formatted file name automatically assigned that Internet Explore rejects ending the download.

  Original title: secure registration problem files formatted CVT.

  I can't download and save the bank statements on a site protected in CVT format. A get - name incorrectly formatted file automatically assigned that Internet Explore rejects ending the download. A similar problem occurred on an another FTP secure sites, download PDF, but otherwise, all files download without any hitches. The problem also occurs on two desktop computers my similar configuration. In an internet café, everything works with XP but not on my new computers in the House. I use Kaspersky Internet Security 2012 and MS Office 2010 and the latest updates from Ms.

  Hello

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Add Web sites to a security zone and check the status of the issue.

  (a) open Internet Explorer by clicking the Start button, and then click Internet Explorer.

  (b) use the site you want to add to a specific security zone.

  (c) click the Tools button, and then click Internet Options.

  (d) click the Security tab and then click on an area of security (intranet Local, trusted sites, or restricted sites).

  (e) click on Sites.

  (f) If you clicked Local intranet in the previous step, click Advanced.

  (g) the Web site should appear in the box add this site in the field in the area. Click on Add.

  a. If the site is not a secure site (HTTPS), clear him requires a secure server (https :) for all sites in this zone check box.

  (h) click Close, then click OK (or click OK twice if you clicked Local intranet in step d).

  Method 2:

  Keep the computer in a clean boot, disable the antivirus and check the status of the issue.

  Step 1:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.

  http://support.Microsoft.com/kb/929135

  Note: Please, go to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem.

  Step 2:

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  You can also refer to:

  Use Word to open or save a file in another file format.

  http://Office.Microsoft.com/en-us/Word-Help/use-Word-to-open-or-save-a-file-in-another-file-format-HA010370113.aspx

• Strange code after the export format

  Hi all

  I have problem with export to SQL program code, VIEWS of expatialy.

  When I right click > change the view, I feel I have good formatting like:

  SELECT

  A1,

  A2,

  A3

  OF tab1

  WHERE 1 = 1

  AND a1 = 12

  OR a2 = 100

  but when I want to export code with SQL developer or see the code via dbms_metadata.get_ddl, I get:

  SELECT a1, a2, a3FROM tab1

  WHERE 1 = 1 and a1 = a2 12OR = 100;

  Keywords like FROM are connected, this code is not valid to run it.

  Any suggestions?

  I found the answer.

  I set disable option: Preferences > database > SQL Formatter: AutoFormat Visible SQL and PL/SQL,.

  Then, every thing looks good and code exports as well.

• Almost without loss best export formats?

  Hello

  I need to provide a ProRes format file to a place that shows my work. I don't have a Mac, but they offered us convert a file that I can export to FCP.

  I wonder what will be the best exports almost without loss for this? I considered Cineform but it's a video of m 87 and I imagine that the file size will be huge.

  Any suggestions on the best almost lossless formats whose size is low which should work with FCP would be very appreciated.

  Thank you!

  Size of the file without loss and low are usually mutually exclusive.

  You asked this question 8 days ago and he said Cineform/ProRes

• Some export formats cannot

  I want to export some formats of my photos so I

  1. use the cropping tool and enter a custom appearance

  2 export the image to resize to adjust and enter in the format I want

  It works for most of the formats, but I can't get these correct:

  1300px X 2000px

  2697px X 1518px

  Any help is very appreciated.

  A possible answer to my ratio custom 13 x 20!

  If you enter values in the dialog custom report that are larger than 20, then the ratio is reduced to smaller values.

  (I remember reading it somewhere but can't remember where)

  So my 13 x 20 shows that 13 x 20

  My 19.5 20.5 x is converted to 1.95 x 2.05

  I don't know how - "clear history of CRI and"try again? '"  They can be stored in the preferences file - there will be a Lightroom guru who knows the answer to that. (edit the preferences file?)

• Incorrect export of video to AVI - no option in my quicktime version

  I tried to Flash CS6 to export a Windows AVI format video. Unfortunately, this video cannot be played in any player. Windows media player does not start and the VLC player returns an error message 'create the index file', then the player does not start. The video is in 1680x1050px with 24 image / sec. A possibility as a QuickTime video export, as shown in the online manual, it is not with me. My version of Flash is not correctly or what I can do?

  Best regards, Thomas

  Flash uses Adobe Media Encoder to create a video output. The media encoder is usually installed when the Flash is installed. You will need to re - install Media Encoder.

• Can't choose export format

  Hi fellow users of Indesign.

  Recently, I had a problem with my Indesign CC 2014. When I want to export or "save under" a file in Indesign on Mac, I don't get the format selector (see image below). I had this problem for the last few days. I did test with Illustrator and Photoshop and have no problem with these programs. InDesign is the only application affected. I use a Macbook pro with Mac OS X 10.10. Any help in this matter would be greatly appreciated because it is at work, I use Indesign CS5, so save files in different formats is essential to my workflow.

  Best

  

  A few other people have reported recently. I think that in both cases, what worked was to uninstall InDesign CC and reinstall.

  You can uninstall the desktop creative cloud application or by going to Applications > InDesign CC 2014 folder and using the uninstall program.

• Export format for Christie Solaria a DGI projector

  I have a projector of IMB a Christie Solaria and would like to know if there is a way to export SMPTE / 428-11/2009 2048 x 1080 with rate (24, 25, 30.48, 50 or 60) with a depth 12 bit and color Format y ' Z (4:4:4). Regarding sound - SMPTE 428-2-2006 with the frequency of sampling of 48,000 and 96,000 kHz with little depth of 24-bit.

  
  

  Thank you!
  

  Hello creative eons.

  I have a projector of IMB a Christie Solaria and would like to know if there is a way to export SMPTE / 428-11/2009 2048 x 1080 with rate (24, 25, 30.48, 50 or 60) with a depth 12 bit and color Format y ' Z (4:4:4). Regarding sound - SMPTE 428-2-2006 with the frequency of sampling of 48,000 and 96,000 kHz with a Bit of 24-bit depth.

  With the latest version of the Media Encoder, you can export to QuVIS Wraptor DCP (Lite version) format for a digital film output, which fits many digital cinema projects. For more details, to see if the Lite version included QuVIS fits your needs, click here: . QuVIS

  Thank you

  Kevin

• export a project with several audio tracks changing volume level regardless of the export format

  Recently, I had to submit a TVC and discovered this first changed the power after export level, when the TVC has no quality control.

  I checked the sound intensity of other formats that I had exported and the same thing happened the sound intensity, she had changed.

  After a bit of troubleshooting, I've found a workaround. I have mixdown all tracks in adobe hearing to a track and then imported it in first.

  Once I did the sound intensity did not change after the export.

  "Workflow" for when it did not work.

  I used the edit in adobe for audio tracks from first hearing.

  Corresponding to the audio for the power level, I wanted to and then recorded each track.

  Export first.

  To check the sound intensity

  Put in the file exported in new project first

  Edit audio in adobe hearing.

  Drag the audio file in game audio to check the sound level.

  I use

  Adobe first Pro CC v8.1

  Windows 7 on PC

  Fix this adobe.

  So you should use Loudness Radar in the mix... .to requires the specification of the broadcaster.

  Your workflow such as described did not understand that.

• Wraptor DCP missing for the export format

  Hello.

  I have a new install of Windows 7 64 bit and a new installation of first Pro CC 2014 8.1.0 (81) build.  When you open an earlier draft of first Pro CC I don't have the Wraptor DCP format for export.  If I create a new project and sequence and empty a video file on the timeline and try it and export, it's still not there.  I checked the plug-ins/common folder and I have the Wraptor.prm file in there.   I searched and searched the web and I have not seen a question like this before. I saw something about Oct is not yet supported, but I have a second Windows machine (Windows 7 64 bit) I installed body on and that's where.  I must emphasize that in again (build 8.1.0.122) miss me the system predefined with Wraptor DCP cinema too.  Will there be a sine qua non for the STC option that I missed?  I don't remember to do something special on the other machine to do this.  Note, I uninstalled both, and reinstalled to ensure it wasn't a failed installation.

  Anyone have any ideas?

  Thank you.

  Solved my problem.  Apparently in the dam of Windows updates I haven't yet caught SP1.  Only downloaded once Wraptor DCP was now a selection in body and still.  Someone else who comes through this slot Windows 7, make sure that you have installed SP1.

• Export - formats of photo dimensions

  I'm new to Lightroom. When I export a group of photos, some are about 3000 x 4000 and others are about 6000 x 8000.

  These larger sizes will not download to my Picasa Web Albums.

  
  Why are different sizes? Some are taken on my iphone and are the largest size and others are on my DSLR and the small size.

  Thank you

  When you select in the dialog box export export will be the same size as the original. You said yourself that some of the pictures come from your phone and some of your SLR. They create different files formats. Your originals is so different file size. If your exports as

  When you specify a size in the export dialog box, all exported images will have this size.

  If, for example, you select 1000 pixels on the long side, all exported images will be 1000 pixels on the long side, but the short side can vary because its size is determined by the ratio of the sides. For example; If you had a square image, long side and the short side would be 1000 pixels. But for an oblong image the longer side will be 1000 pixels, but the short side can be 750 pixels.