Incorrect recording time

Similar Questions

• How to increase the recording time

  Initial term of the title: Recvord
  I would like to extend the recording time is included in XP. It will be released in 3 hours. How can I do that. If I can't do this, then how RIP with Media Player 11

  Initial term of the title: Recvord
  I would like to extend the recording time is included in XP. It will be released in 3 hours. How can I do that. If I can't do this, then how RIP with Media Player 11

  ================================
  XP Sound Recorder is limited to 60 seconds.

  The free Audacity software may be worth a try.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Audacity
  http://Audacity.sourceforge.NET/

  Recording with Audacity
  http://Audacity.sourceforge.net/manual-1.2/tutorial_basics_4.html

• How to operate the laboratory discovered multi-function synchronization with multiple devices and change the recording time?

  Hi, I'm new in Labview. I need help for:

  1 change a program multi-function in order to record the data of three cards daq (devices 1-3) and output through the map (1 unit). The current program was created to record and output signal of one of the card (1 unit). I try to choose multiple devices when I run the program, but there is an error 200558 shows "a task cannot contain multiple independent devices. Create a task for each independent device.

  2. change the duration record for a longer period, for example: 0.1 s. Currently, the recording time is s 0.009971.

  I joined the multi - funtion.lld. In this library, "des_v2_Multi-Funtion_Synch I - AO.vi" is the program that I need to change. I've also attached a file of input for runing the program signal.

  Thank you very much!

  Sincerely,

  Jie

  Hello Jshen6,

  You can have different examples of VI if you do not use the same version of LabVIEW. I am currently operating on LabVIEW 2013 SP1. Whatever it is, this article should be useful to you that he describes in detail how to synchronize multiple tasks of series M.

• set the default recording time in windows sound recorder

  Looking for a way to increase the default value to the recording of the sounds found in XP home recorder.  There is no documentation that I can find to the configuration

  Hello

  In the default recorder recording time is 60 seconds. There is a solution to increase the maximum recording time. Follow the steps mentioned below:

  Step 1:
  a. utility start Sound recorder.
  b. click on save and then Sound Recorder run for 60 seconds.
  c. once the sound recorder to stop recording, click Save as on the file menu, and name the file Blank.wav.
  d. in order to increase the maximum duration of recording in sound recorder, click Insert a file in the Edit menu, and then insert the Blank.wav file saved in step 3. When you do this,
  the maximum recording time is increased by 60 seconds. You can repeat this step once for each additional minute recording that you want to add. For example, for 5 minutes
  recording time, insert the Blank.wav file five times.

  Step 2:
  To make the tape recorder automatically use the extended length of the recording time:
  a. Click Start and then click Open.
  b. double-click the programs folder.
  c. double-click the Accessories folder.
  d. double-click the multimedia file or entertainment.
  e. right - click sound recorder and then click Properties.
  f. click on the shortcut tab.
  g. in the target box, press END, press the SPACEBAR and type the location of the file Blank.wav.

  For example, if the target is 'C:\Windows\sndrec32.exe', and the location of the Blank.wav file isC:\Blank.wav, the new line in the target box is "C:\Windows\sndrec32.exe C:\Blank.wav"

  The next time that you start the tape recorder, the Blank.wav file opens automatically. After you save your new .wav file, you can click on remove after the current Position in the Edit menu for
  Remove the extra space in the file.

  NOTE: when you have finished recording and editing of your new .wav file, save the file with a new file name.

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• How to limit the audio recording time?

  Hello

  I want to limit the audio recording time 60 seconds. How can this be achieved? I've seen a single method but its to set the size. Or is it possible to get new coding time during recording? Please help me!

  When you start recording start timer once it reaches 60secs... stop recording.

• When inserting to reject incorrect records

  Hello
  
  I have a SQL query like
  

  insert into table1 select * from table2

  Table 2 has now some incorrect records. It; s a field table and the date of stage inside is VARCHAR2 format. And for little it records not in the right format. Then, when insert into table1 and making to_date it throws error.
  
  Error number: ORA-01878
  
  So now, I want to reject these recordings and insert the rest of the records. Please guide how this can be achieved.
  

  select * from v$version
  where banner like 'Oracle%';
  
  Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production

  Thank you and best regards,
  Mr. lonely
  
  Published by: Mr lone on April 10, 2013 10:35 - added Version

  CREATE OR REPLACE FUNCTION checkDate(d VARCHAR2) RETURN DATE DETERMINISTIC IS
  BEGIN
    RETURN to_date(d,'dd.mm.yyyy');
  EXCEPTION
    WHEN OTHERS THEN RETURN NULL;
  END;
  

  WITH t(d) AS
  (
    SELECT '01.01.2013' FROM dual UNION ALL
    SELECT '04.04.2013' FROM dual UNION ALL
    SELECT '.2013' FROM dual UNION ALL
    SELECT '09.04.2013' FROM dual UNION ALL
    SELECT '01.asdasdasdsad' FROM dual
  )
  SELECT checkDate(d)  FROM t
  WHERE checkDate(d) IS NOT NULL
  

  Published by: Ramin Hashimzadeh on 10 April 2013 09:59

• SQLLDR, get the incorrect records

  Hi forum,
  
  I followed records from a CSV file. I need to extract a table. But I'm getting incorrect records.
  check-in:
  9, 107CV6, 2079-06-06 00:00:00.000, 2079-01-01 00:00:00.000
  
  CTL file:
  load data
  INFILE 'file1.csv.
  BadFile "ifile1.bad."
  Truncate in table tab1
  fields ended by ',' optionally surrounded "" "
  trailing nullcols
  (
  col1,
  col2,
  col3,
  COL4
  )
  
  Table:
  CREATE TABLE tab1 (col1 VARCHAR (100), col2 VARCHAR (100), col3 VARCHAR (100), col4 VARCHAR (100));
  
  columns 3 and 4 seems to be the origin of the problem because it contains-,:, and. characters
  
  Thank you
  Mahesh
  

• Loading of SQL * Loader incorrect records in table

  I m using 10g. I create my SQL * the charger on the fly control file. After the execution of the control file, some incorrect records are created. I need to insert these incorrect records in another table. A column of the table will have the wrong record [LONG data type] and the other will be the file name. This is possible thanks to the logging of DML errors or the external table. I have several bad files.

  Hello

  OP wants to load some generated off sqlldr badfile records and where these data will be loaded should not have more than 3 columns (so is the control file) that I posted in my post back and it works like a charm :) (tested and current usage).
  Concerning

• The numbers won't let me record time

  Hello

  I transferred my data from old iMac (mid-2010/Mavericks) numbers to a new (end 2015/El Capitan). In addition to the fact that I can't use the wonderful version of iWork and I'm stuck with a version with an annoying interface, numbers will not work correctly.

  I have a table to track the interactions I have with my students online. In a column, I record the time spent in particular student tutoring. Although the numbers transferred the old data to the new program, it won't let me enter the duration in. I can't copy and paste. And since I get paid according to time spent, it is a crucial column.

  How can I fix it?

  Thank you

  Kim

  Kim,

  It is always easier to help when you see what you see.  Use this link to help you post a screenshot.  It is safer to remove the personal information from the screenshots.  So duplicate sheet and change called a remove personal information:

  How to post a screenshot on the Apple Discussion Forums

  Explaining what happens when you type in a cell where you try to enter the hour.

• 39L4363D - cannot set the record time of beginning and end of filling time

  Hello

  I have a problem with my 39L4363DG tv (software 7.1.90.34.01.1).

  I'm not able time of filling time of beginning and end of record setting as described in the [Manual | http://www.toshiba-om.net/LCD/PDF/English/L4363-323950-English.pdf] on page 51. The menu item "padding-start" and 'end padding time' are disabled?

  Can someone help me and give me advice on how to solve it?

  Hello

  The charging time can be set for the scheduled recording.

  There is also a priority planning
  If the regular time intervals are ensuites to each other and there is more than one minute between the time of the end of the annex i and the next scheduled start time, scheduled recording will be performed correctly.

  When + start time of filling + and + hour of end padding + are value, the start time and end time more is the time the extra minutes.

  If planning time overlap, priority will be given to the scheduled recording starts first.
  When the scheduled recording that began the first ends, recording will switch to the next regular program.
  At that time, according to how much programming time to overlap, the section from the beginning of the next regular program is not registered.

• Record time from start to trigger

  Hello

  I have a program that uses analog channels N to record data, they begin taking data (either finite or continuous) a trigger.

  I use the built in digital triggering but a software analog trigger (works well if). For now we'll just worry about digital triggering.

  I am trying to record the elapsed time since then when I start the program when the trigger signal is received - that is, when the program actually starts its data collection.

  I saw examples of how to put a stamp of time when relaxation HERE. However, I have a few differences in my code - mainly that I'm collecting channels N data rather than complicating it. Also I don't want to necessarily the timestamp, but the elapsed time from the beginning to receive the trigger.

  Right now I have some ideas:

  (1) somehow the timestamp of the start of the VI, then understand the timestamp of the relaxation in a manner similar to the above example, subtract the difference.

  (2) in debugging code, I find that the probes record the last update at some point in the code. Is it possible to use the actual code?

  (3) more difficult. Establishment of a new channel that observes the digital channel I'm tripping off the coast so that I can save its data permanently, wire this channel to trigger my analogue channels. then I see the time at which the trigger has exploded. But I'm not sure how to implement this.

  Looking for opinions as to what would be the best way to accomplish this task.

  Also, I can post my code if desired - I don't have because it's big enough and hard to follow.

  Thank you all,

  Beefcake

  Take a look at the range of Timing.

  In addition, if you are looking for the NI Developer Zone for 'elapsed time' you will find 160 documents.

  Surely something in one of these places will help you.

  Cameron

• Probems with the record time on the TDS3014C

  Hello

  I use a tektronic TDS3014C brought to acquire data from an AC supply.  I played with the single channel waveform acquire VI examples and added a "wirte to file the measure" puck.  "I would like to record a stream of waveform for 5 seconds and write this file, but if I try to enter a ' times a record" greater than 100 ms data is beginning to break down.  I know that I can acquire only given 10000 point using this material, but is there a limit to the length of a continuous acquisition?

  Trent

  Hi ErgonTW,

  After reviewing your chart I think that the configuration is correct. However, your chart is only show four milliseconds of data. You need to change the x-axis of your chart to show the entire waveform. Do double-click le.004 on the x axis and the abandoned.2 then click anywhere on the front panel. This will change the values.

  Perry S.

• The display and recording time elapsed during the reading of the instrument

  I've been programming Labview for a total of two days so please bear with my inexperience. I have a 9201 module that takes a reading of the voltage and it is plotted on a graph. I click on a Boolean switch and the graph starts playback and recording data every 3 seconds. When I click on that same switch I would like to start a clock. Then once the button is clicked once again I need to stop the clock and save time. I tried to use the elapsed timer function but can not understand how to operate inside my main while loop. I don't know if I need to use a subvi or something different all together. I enclose my any project that could make the issue easier to understand. Thanks in advance for any help.

  I changed your code (personally I him would not have made it, but I don't want too many changes in your code because you are a beginner in LabVIEW!).

  -Now, there are 2 loops: 1 bow for the acquisition (looped) and 1 loop for user interface operations (while loop + event structure: it is a very powerful structure in LabVIEW and you should take a look at a few examples to understand how it works)

  -You will find a registry to offset used by loop acquisition: I explain what it is in the diagram...

  -I gave you a VI that is almost the same as 'out of time' Express VI: maybe it will be interesting to try too understand that when you get more experience in LabVIEW (you will understand 'functional global variables' and "reentrancy execution": these 2 animals are used by 'elapsed time' Express VI (but also by the VI I've included, and which is almost the same thing))

  Note that I have shown the solution to 1 of the 4 graphs: you will need to do the same for the other 3. You also need to code elapsed time saving.

  Once again, the solution I gave you is very far from perfection, but with 2 days of practice of LabVIEW, it would be too complicated to explain the different architectures and the means of communication between the loops etc...

• Canon EOS Rebel DSLR t5 Record Time

  I found several sites Web says that the device must record up to 30 minutes of video footage before cutting. I also found that it depends on the memory card.

  In my camera, I have a 32 GB card, but my camera record of 11-12 minutes (time weird I know, but I have timed to make sure that... He usually cuts around 11.54 or 11.58). I was wondering if there was a way for me to get my camera to record the appropriate amount of time. The memory card is empty, no photos or videos.

  Any help is appritiated.

  Oh... is also questionable. Does anyone know if this particular model can autofocus WHILE shooting video (hold something up to the camera and the lens focuses on this point, then when you delete the item it focuses on you), and is there a way to make the background of blurry video, once more, during the filming?

  Thank you once again.  

  A single video clip would be limited by three things:

  (1) the card is formatted with FAT32 file system so that it can be widely read by any PC, Mac, Linux, computer etc.  But this file system has a size limit of 4 GB.  No single file cannot be larger than that.  You would stop and start a new recording so that it records to a second file.

  (2) if the card is 4 GB of free space on it... It stops as soon as possible (of course).

  (3) even if you set a very low video resolution so that she will not fill 4 GB in 30 minutes, it stops always at 30 minutes.  This is because in some countries, 'video' cameras are charged at a different rate from that of the photographic cameras.  By an international treaty, cameras are allowed to record video clips... and will not be tariffed as of the cameras 'video' as long as these clips may not exceed 30 minutes.  It is the purpose of the CAP of 30 minutes.

  Autofocus:

  Regarding the autofocus during video... the 70 D (and I think that now the 7 d II) have special technology on the sensor that allows the continuous autofocus while shooting video.  This feature is available in some Canon models that have "Dual Pixel CMOS AF".

  For other cameras, the sensor must use a different method of focus and it's some "guess".  It's "contrast AF detection.  Imagine taking a picture of a code bar... white background with strong black stripes.  In theory, so focused with precision, each pixel should be 'black' or 'white '.  And on the edge of a stripe, you should have a 'black' pixel adjacent to a 'white' pixel (this is a difference of extremely high contrast between adjacent pixels).  Now imagine you deliberately focus the camera.   You now have a pixel 'black', followed by several pixels that are progressively more light and lighter shades of gray... until you arrive finally at the pixel 'white '.  It's a "low contrast" difference between adjacent pixels, and it is low because the image is blurry.

  This means that if you can maximize the difference in contrast between adjacent pixels in some areas of the framework, you nailed focus.

  The "problem" with this system, it's that if it's blurred, he has no idea what to do to improve the development.  He can try mobile focus outward, re - sample the image and see if things improved.  Otherwise, it can run the focus inward and try again.  Once it is on the direction in which is better, it can start then refine the focus until he nails finally update the point.   But this system causes what is called "hunting at home" where you see visually the camera tries to focus while you record video - not good.

  Pro videographers determine before their major focus.  For example if they want to go to the theme 1 theme 2 in a scene, imagine putting a piece of tape around the ring with a felt market and development to mark the position of development for question 1 and another brand for about 2.  When THEY move the focus, they go directly between positions and no one watches the video sees everything "hunt."

  To avoid the 'hunting', the camera does not have auto-focus during video recording continuously.  You can press the button in focus on the back (it's usually the asterisk (*) key but I do not have a T5) and this will require the camera to auto-focus at this time (but you'll see this.)

  If you need real continuous AF during video then you would like to use a real camcorder OR you want a model that supports the feature as D 70.

  Do blurred backgrounds:

  This is determined by the "depth of field" which is derived from a combination of (1) the focal length of the lens, (2) the current aperture setting, (3) the distance between the subject and (4) the physical size of the sensor of the camera.

  (1) the longer focal length will reduce the total depth of the field.  For example, a 200mm lens will have a depth of field than a 20mm lens.  This means that longer lenses can generate a greater amount of background blur as wide lenses (and do not generate very large lenses almost no blur either.)

  (2) using the values low f-stop (the aperture value) creates a narrow depth of field.  f stops such as f/2.8, f/2, f/1.4 work well... high f-stops as f/11, f/16, f/22 generate very large depth of field, which means that they do not have much that would be blurry or off discussion.

  (3) the depth of field is naturally broader if the distance between the subject is far away.  Close subjects get very shallow depth of field.  In other words, if you focus on a subject that is actually very close... While the background is very far away, "narrow" depth of field on your narrow topic will mean that the background is well outside the update and will be very blurred.

  (4) finally (and this isn't anything you can change), the size of the sensor of the effects on the technical level also the depth of field.  Have your camera, a sensor of APS - C size, is big enough and will have no problem producing the blur you want... given the right report low-f / d and long focal length.  Only, I mention this because the smaller sensors (for example those on point & shoot cameras or camera-phones) must have their crop factor multiplied by the ratio f / d to determine a ratio f / d effective.  When she the crop factor is huge (very small sensors), this means that, even with a 'real' focal extremely low, the report f / d 'effective' is so high that the camera cannot generate the background blur.  Don't worry-I only speak because one of the reasons people like the look of DSLR images is due to this background blur this point & devices and phones cannot generate and that they are unable to generate the effect is because their sensors are too small.

  When you put all this together, you want to:

  (a) a long focal length (e.g. 85mm... ... of 100 mm or greater) with (b) a low f-ratio / d (for example f/2.8 or less... a telephoto lens like a 55-250 mm f/3.5-5.6 reached f/5.6 as this is the lowest possible report f / d when it is simply of to halfway across the range.)  f/5.6 is very low so you won't get a background blur hard.)  And (c) you'd want your subject to be located close to the camera and you would be wan further background.  You do not see what effect (or certainly not a lot of it) If you put your right subject against a background such as a brick wall... Pull the topics forward and in the background.

  The "quality" of the blur (not only the force) is described as its "bokeh".  Some lenses produce a quality much more beautiful than the others.  Multiple aperture blades is an important factor, as well as the way "rounded up" the aperture of the lens is due to the shape of the blades.  But the final appearance so influence other optical qualities.  Usually more expensive than glass... more look.

• Date incorrect Conversion time

  Hi experts,
  Need help can't seem to understand why the time is wrong.
  Under query 'dte_computation_on_data' is the old function that use to convert the date and put it in the table. Problem is when he come back to the effective date of the hour
  is incorrect. Need help. Thank you
  

  SELECT -- THIS HERE IS MY TEST TO REVERT TIME AND DATE ON THE FORMULA OF WITH RESPECT TO THEIR FUNCTION
  to_char(TO_DATE('19700101', 'YYYYMMDD')+(tb1.dte_computation_on_data/86400),'MM/DD/YYYY') || ' ' ||
  to_char(to_date(mod  (tb1.dte_computation_on_data,86400) ,'sssss'),'hh24:mi:ss ') revert_test,
  systimestamp,tb1.dte_computation_on_data
  from
  ( SELECT -- THIS IS THE FORMULA OF THE OLD FUNCTION THEY USE TO CONVERT DATE TO NUMBER AND INSERTED ON THE ROW
      floor((CAST(SYS_EXTRACT_UTC(systimestamp) AS DATE) - TO_DATE('19700101', 'YYYYMMDD')) * 86400) dte_computation_on_data
    FROM dual)tb1;
  
  results 
  ---------------------------------------------------------------------------------------
  REVERT_TEST             SYSTIMESTAMP                            DTE_COMPUTATION_ON_DATA
  05/19/2011 03:46:18     5/19/2011 11:46:18.005171 AM +08:00     1305776778

  If you want the result in your local time instead of UTC, just add the difference using TIMEZONE_HOUR:

  select to_char(revert_test, 'MM/DD/YYYY HH24:MI:SS') as revert
  ,      to_char(now, 'MM/DD/YYYY HH24:MI:SS')         as now
  ,      dte_computation_on_data                       as comp
  ,      revert_test - now                             as diff
  from
  (
  SELECT -- THIS HERE IS MY TEST TO REVERT TIME AND DATE ON THE FORMULA OF WITH RESPECT TO THEIR FUNCTION
         to_date(to_char(TO_DATE('19700101', 'YYYYMMDD')+(tb1.dte_computation_on_data/86400),'MM/DD/YYYY') || ' ' ||
           to_char(to_date(mod  (tb1.dte_computation_on_data,86400) ,'sssss'),'hh24:mi:ss'),'MM/DD/YYYY hh24:mi:ss')
           + (EXTRACT(TIMEZONE_HOUR FROM SYSTIMESTAMP) / 24) as revert_test
  ,      systimestamp as now
  ,      tb1.dte_computation_on_data
  from
  ( SELECT -- THIS IS THE FORMULA OF THE OLD FUNCTION THEY USE TO CONVERT DATE TO NUMBER AND INSERTED ON THE ROW
      floor((CAST(SYS_EXTRACT_UTC(systimestamp) AS DATE) - TO_DATE('19700101', 'YYYYMMDD')) * 86400) dte_computation_on_data
    FROM dual) tb1
  )
  /
  
  REVERT              NOW                       COMP DIFF
  ------------------- ------------------- ---------- ---------------------------
  05/19/2011 10:01:09 05/19/2011 10:01:09 1305792069 +000000000 00:00:00.522953
  

  Now, there's only the milliseconds left as difference.