Increase the packets received per second UDP

Similar Questions

• The less-than-per-second value

  With the Premier Pro, I used I think that the value was 0.01 seconds, until I discovered it only goes to 24. So, what is the real value? I'm in on this for my physics EEI.

  [IMG] http://i50.Tinypic.com/33y1jio.PNG [/IMG]

  The value with a red frame around it.

  The timecode is on hours minutes seconds. frames.

  If your sequence setting is 24 fps time code indicates 0 to 23.

  If your sequence setting is 30 fps timecode indicates 0 to 29.

  So 21 is the abbreviation of 21 images.

  There are: (colon) between the numbers I understand you are in PAL-land. PAL has 25 frames per second.

  NTSC has; (semicolon) between the numbers.

• Can I increase the wifi receiving capabilities of the hp 8500 a. I need a longer reach?

  I need increase the range of the printer. The walls of my house are very thick, can anyone suggest anything?

  Hi Steve,.

  Thanks for posting your question in the Microsoft Community and we give the opportunity to help you.

  Unfortunately, you can not increase the range of Wi - Fi connection. However, you can create a bridge network the network connection to the printer. Check out the following articles for more information on creating a network bridge:

  Create a network bridge

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-network-bridge

  You can also see the following article for more information on improving your wireless network:

  10 tips to help improve your wireless network

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=NLPr8cmzIE6

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• How do I see the number of events per second received by MARCH

  Hello

  I have a MARCH installed in a customer demonstration porpuse. Y at - there a way for me to see how many events per second has the MARCH has received?

  In the newspapers of the access list when even if she cannot connect due to the limit of the flow it is said 'missed 20 bags due to pulsations.

  Then maybe the MARCH cannot process all the events, but he can tell how many events, he received per second on average.

  access to the admin-> maintenance-> view system logs and files search messages rates

• How to increase the FPS of animation in JavaFX?

  I tried to run the demo of animation tree in the official JavaFX Documentation

  System.out.println("FPS "
    + com.sun.javafx.perf.PerformanceTracker
    .getSceneTracker(stage.getScene())
    .getInstantFPS());
  

  his output FPS:

  FPS 0.0

  FPS 0.0

  FPS 0.0

  FPS 0.0

  FPS 0.0

  IPS 1.4929106

  IPS 5.299572

  IPS 6.80842

  IPS 6.7564187

  IPS 6.937902

  Why is it so low? How can we increase the FPS to have a smoother visual effect.

  Can we adapt the FPS (frames per second) of the animation in JavaFX?

• 10 samples per second 9229

  Looking to capture the 10 samples per second in a file by using a NI9229.

  I think I have the output to work correctly using a backup in format ascii/lvm.

  My problem is that I can't know the ratio to capture who gives me 10 samples (10 rows of data) per second using a 'samples of N' 'samples to read' and 'rate (Hz).

  My goal is to have 10 samples per second and the first column correctly lable time since when I click 'run' until I hit the stop and tell me how many seconds it failed because I stopped before her.

  Thank you

  Matt

  Hi Matt,

  I didn't know that you use SignalExpress.

  This is what you want?

  • DAQmx acquire:
  • • Acquisition mode = continuous samples
    • Samples to read = 200 (or 2000, if you want to see 1 second at a time on the graph)
    • Rate (Hz) = 2 k
  • Subset and resampling:
  • • Subset of return = false
    • Resample = true
    • DT = 100 m

  Brad

• How to increase the scriptTimeLimit?

  Is it possible to increase the scriptTimeLimit beyond 15 seconds in Flash 9? In Flex, you can set the scriptTimeLimit on the < mx:Application > tag, but I don't see anything in the documentation on how to set the type of ActionScript 3 / Flash 9?

  gjastrab,

  > I should clarify that I use Flash 9 AS3 Preview. I do not see
  > settings to adjust the scriptTimeLimit of publication of all Flash settings.

  Yes, it's an alpha version of the new watch and public barely
  features. Actually, it doesn't, really, possibly compile SWFs to take
  advantage of the new virtual machine in Flash Player 9 for AS3. You will have to
  Buy Flash CS3 appropriate in order to get access to what you're after - as well
  tons of new features new slot. :)

  David Stiller
  Adobe Community Expert
  Dev blog, http://www.quip.net/blog/
  "Luck is the residue of good design."

• Increase in the number of samples taken per second

  So I am a beginner in LabVIEW, and I work in a program to help me with some research. I enclose my VI below, and I take the data at a rate of almost 2000 samples per second (using the express deadline fixed VI a.001s). However, I need to be taken of data to approximately 10,000 samples per second, but if I try simply decrease the amount of delay (up to a.0001s), does not increase the sampling rate. Someone at - it thoughts/solutions to tide me over? Thank you.

  Use the example Finder and search for the "Input.vi - continuous voltage.  It is a good example of an acquisition of base.  There is also a built-in DAQmx called Logging configuration.  When activated, DAQmx will automagically be journal of task data to a TDMS file for you.  Use the continuous acquisition and set the frequency of sampling to the desired frequency.  You will need to read multiple samples to stand.  But this example is a great place to start.

• How to set the number of packages to be send per second on the serial port in labview

  Hello.

  I need to send data to the serial port such that each data packet must be sent at a rate of 4 packets per second? How can it be done?

  Thanks and greetings

  What defines a package?

  You just need to have a while loop with a timer waiting for 250 milliseconds surrounding your VISA writing the function.

• Change the number of frames per second

  It's very simple stuff - so I hope I'm missing an obvious answer... that is.

  I have an animation that goes 15 seconds and 16 fps. Total of 240 frames.

  I want to change to 15 seconds at 30 frames per second. A total of 450 executives.

  Is it possible to do - that will keep all the keyframes in relative place? Or I have to recreate the test specimen at 450 and pass each unique to his new position keyframe?

  Thank you for your help.

  T

  Unfortunately, no, you can't do that and keep the same length. You CAN change the frame rate, but increase the rate of 30 frames per second will make the scene twice as long because are presented twice as many images per second.

• The latest version of iMovie supports 30 frames per second?

  I tried creating a simple slide show, but could not find a way to make 30 frames per second, with 60 being the default and automatic.

  Although it was several months ago but I remember not being able to find a way to select the 30 images (if this option was available at all).

  So my question is: how to make a slide show and make it to 30? I choose my desired pace at the beginning or at the end? Can I do it at all?

  And Yes, I use the latest version of iMovie .

  Yes, the latest version of iMovie supports 30 frames per second.   You set the frame rate by adding a 30 fps known as the first video clip vid that you place in the timeline of your movie project.  After you have added your other pictures/clips, you can remove the first clip if you wish.  The project will have already been set at 30 frames per second.

• AdBlock Plus increases the startup time of 4 to 12 seconds...

  I have 12 addons on my last FF.
  One of them is the latest version of AdBlock Plus.
  With all the people with disabilities, FF cool strats after max 3.5 seconds.
  Adblock Plus activation generates the new FF start after 10 seconds...
  This seems rather extreme slowing...

  Allowing all the other addons (11), just increase the new start with about 1/2 second...

  See the support of Adblock Plus forum.
  
  http://adblockplus.org/forum/

• I am running 10.1.1 version. Is it possible to export the video at 30 frames per second instead of 60 frames per second?

  I am running 10.1.1 version. Is it possible to export the video at 30 frames per second instead of 60 frames per second?

  Yes.  The frame rate (and resolution) of a project is determined by the first clip set a new timeline for the project.  So put a clip known 30 fps (with the resolution you want) in a new project timeline then copy everything from your existing project in the new project.  You can then remove the first clip if you wish.

  Geoff.

• Since the update to 14.0.1 javascript error appeared (this.transforms is not defined - 3-4 errors per second)

  Our phone system of companies has a web interface since the 14.0.1 update is no longer works. I tried to open it in safe mode with no extension active and ensure that cache has been cleared. In the error logs, I see "this.transforms is undefined" and is repeated 3 - 4 times per second, no matter how long the page is opened. Many pages in the web interface are compressed and if I select a different tab background change but not the areas that fall within her and all submit buttons are ignored.

  It works in other browsers and in older versions of firefox, so our miracle temp to say personal use Chrome until we have a chance to roll back on Firefox, even if we are not sure if Firefox is simply updating again.

  Finally solved the problem. Discovered that the issue was only happening on HP systems so that it narrowed down. Yet a new windows install using their disks restore would fail on the new update (but only if HP utilities were all re-installed - for example, as fingerprint reader security utilities). I got some new updates for those and the problems went away. Yippee. My guess is that it was the security utilities that run in the background, because they are not browser so plugins work even in SafeMode to browser.

  Glad we got going I didn't leave Firefox. What a pain though, as he had really left me speechless.

• White LED of Ethernet to the router flashes constantly (to about 5 flashes per second)

  The Internet on my router Netgear (R7000 Nighthawk, AC1900) white LED flashes constantly (about 5 times per second), and it is originally the link on my modem light blinks constantly. All started about four days ago. I thought that my modem was defective, but I spoke with my ISP technical support who said it was the router that has been at the origin of the modem LED blink. I unplugged the power supply to the router, but when I plugged it in the problem has not been resolved. I also reset the router (using the reset on the back of the router) but that has not solved the problem. Any help would be most appreciated. Thank you.

  View that statistics is one of the purple buttons under the Internet Port pane.