increase the process in 10g

Similar Questions

• How to increase the processing speed by connecting to another computer via USB - USB cable

  Share laptop processing power. Windows 8, Windows 7

  Hello

  I was wondering if I could increase my processing power by connecting a portable alternative to mine via a USB to usb cable. If anyone knows how I would go to do that, or if it is possible I would like to know. I searched on google but not found all the answers.
  If this can help, my laptop is running Windows 8 32-bit preview developer, and the portable alternative is running as Windows 7 Ultimate 32 bit.
  Any help would be greatly appreciated.
  Thank you very much
  Mike

  Hi MichaelSenior,

  You will not be able to increase the power of a computer processing by connecting it to another computer via a USB cable or by any other means.

  In order to increase the processing power of your computer I suggest you check with your computer manufacturer to see if you can pass any hardware on your computer.

  Example: Increase the size of the memory on your computer or upgrading the processor etc...

  Hope this information helps you.

• increase the number of processes

  Hi gems... a very good evening to you all...
  
  Our system is being upgraded and we test our application by increasing the load...
  
  The process of setting is set to 300 in our database(11gr2)
  
  Now because of the enormous load when I ask the County of v$ process is often moving 298 or 296
  
  That's why when new users try to connect to the database, then they receive the error
  
  Oracle is not available
  Shared memory realm doesnot exist
  
  So I think I have to increase the process... am I right?
  
  Another question:
  If I increase the number of processes, then I should increase the distribution of memory?
  the SGA is currently 8.5 GB, and automatic memory management is enabled.
  
  
  Help, please... Thanks in advance...

  Hello

  user12780416 wrote:
  But should I increase the SGA?

  I guess it depends... ;-)
  Each database with a different load profile, I would say that increase the parameters of process/sessions and monitors performance through awr/statspack.
  I suspect you will not need to increase the SGA, but rather to calculate with an increase in the PGA size, given that the SGA by definition is shared between the server processes, but is not the PGA Tour.

  But the real answer is an AWR report, change settings, load and then do another AWR report and analyze the differences in behavior.

  HtH
  Johan

• the process limit

  Hello
  I am not able to connect to the database as process limits exceed.
  How can I kill any idle sessions that led to treat County.
  Most of the session at the level of the bone are distant "local = no".
  
  Thanks in advance,
  
  max_processes parameter Sho
  1000
  
  ps - ef | grep oracle | WC-l
  1000
  
  sqlplus sys as sysdba
  no connection

  Hello

  You can kill some processes but do not kill serer oracle processes that can lead to accident (pick up some of the LOCAL = NO).

  You can use the suite to kill

  kill -9 pid
  kill pid
  

  Then you need increase the process parameter or properly close connection of the application.

  As a general rule, rule of thumb to configure the following parameters

  processes =100;
  sessions = 1.1 * processes + 5;
  transactions= 1.1 * processes;
  
  sql> alter system set processes=1000 scope=both sid='*';
  

  Concerning

• Your system is low on virtual memory. Windows is increasing the size of your virtual memory paging file. This process may be denied requests for some applications.

  When I start my laptop I get "your system is low on virtual memory. Windows is increasing the size of your virtual memory paging file. This process may be denied requests for some applications. "and my laptop takes forever or does not open my programs. any help? Thank you.

  less than low disk space,

  What seems to be the case, it's that your windows is having a hard time resize its file for virtual memory.

  my suggestion is to remove "auto" at that time, and then set a custom format.

  I recommend that you set the initial size of 2 and max at 1152.

  Here's how to put a link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  DB·´¯'·.. ¸ > DatabaseBen, Retired Professional - Analyst - Database Developer's - accounting - former veteran of the Armed Forces - @Hotmail.com 'share nirvana mann' - dbZen ~ ~ ~ >

• Increase the speed of improvement process - R12 with 12.1.0.2 Post

  Legends of dear,

  We are upgrading a database 10.2.0.5 to 12.1.0.2 R12.0.6. using dbua

  -The pre - upgrade processing time is 30 minutes or less

  -The upgrade process is 2 hours 10 minutes

  -Upgrade Post is almost ran for 7 - 8 hours - > how to reduce this time or speed up this process.

  I kept the

  job_queue_process to 1000

  SGA - 2 G

  PGA - 1 G

  Are there other settings to optimize the upgrade of point of view?

  The process upgrade done Post INVALIDS and for an hour, is validate near 10000 objects. Y at - it another way to reduce downtime. ? 36 hours is the maximum time that I have.

  Thank you

  Knockaert

  So prod can I increase the parallelism greater than 4 to 12 right? Or is there a recommended way?

  Yes, it should be faster on production with this number of processors. I don't think that you need to change the number 4 to 12 as DBUA is smart enough to detect the number of processors and parallelism will be set to default 12.

  You don't want to risk going with the largest number since it is the production, if you had a similar hardware, where you can try this on a cloned instance then fine but otherwise I would personally stick with the maximum suggested by DBUA.

  Thank you

  Hussein

• Increase the number of simultaneous processes of Standard Manager

  Hi guys,.

  How to increase the number of simultaneous processes of Standard Manager from 8 to 12?

  Oracle Applications 11i

  Database 10 g

  HP - UX OPERATING SYSTEM

  Thank you

  It depends on how your system is used (number of users.., the number of applications, number of CMs and process, etc).

  You must try it yourself and see how your application behaves if you notice any performance degradation, so you should be good to keep the new numbering.

  I also suggest to review the following documents.

  Simultaneous treatment - CP Analyzer for E-Business Suite (Doc ID 1411723.1)

  Simultaneous treatment - platform generic competitor Manager Questions / answers (Doc ID 105133.1)

  EBS - technology field - Webcast recording ' E-Business Suite - competitor Manager Performance - best practices"[video] (Doc ID 1367676.1)

  Thank you

  Hussein

• process to increase the RAC sga

  Hello gurus
  
  in fact, we have CARS with two nodes.version is 10.2.0.4 on linux.
  
  Currently, my sga size is 6gb.i want to wear to 10 GB.
  
  If I can increase it with the database to the top and one on each node or do I have to go down the database and then run on a single node.
  
  kindly tell me the process with the command
  
  I have to love you
  
  to the bottom of the database, and then run the srvctl order (for the database down) then increase sga and then up to the database.
  
  Please such as process

  Please note this mechanism is essentially mute, and knows nothing about the application or data.

  If you does not resolve the application, it will go in recommending to increase SGA forever.

  Also, how increase the SGA is a matter of doc.
  Please keep questions doc out of this forum.

  ----------
  Sybrand Bakker
  Senior Oracle DBA

• increase the no. for the concurrent Manager processes

  Hello
  We have eBS R12 from Unix.
  I need to increase the number of processes to three.
  What does this mean and how to increase it.
  Concerning

  Hello

  Log in as a user with the responsibility of the system administrator.

  The competitor-> Manager-access-> set.
  petition for the standard Manager and increase the number in the process column.

  Thank you
  Jazz

• Stop and start the bpel process in 10g

  Hello
  
  How can I stop and start a process bpel to automatically set time (say to Saturday 9 pm et we shud stop the bpel process and Sunday 9 HE we shud it again). Pls let me know.
  
  ADI

  Oh... I'm sorry. I have been misunderstood.

  I never did, but you can try with the java code (whether in another bpel process or just another application):

  API to disable the process BPEL (State = stop) in Oracle soa suite 10 g

  Tell me if it works for you.

  Arik

• Increase the priority of the process for the critical elements of RAC

  Y at - it a method or command which can be used to increase the priority of critical components of CARS? Kel interconnection, access to records with the right vote, etc.
  
  The UNIX "renice" command is curious. Does anyone have experience on this subject? Any help is appreciated.
  
  Thank you
  Jarred

  You must set a number of things before anyone can help you. Here is a short list of items that come immediately to mind.

  1 platform and operating system
  2. oracle version number
  3. set 'critical' and name a few of the components you are talking about.

  You cannot prioritize on the rest of the traffic interswitching traffic nor should be no reason to do it, if you read the documentation and followed the advice of the Oracle.

  The only thing I do not recommend, if you have the hardware and the operating system and can establish a need, is to pin the LMS to a dedicated processor.

• Tried to increase the bootcamp partition and now Windows will not boot

  I've got Yosemite.
  I wanted to increase the size of my bootcamp windows partition, so I searched for a way online, and I found this video:

  https://www.YouTube.com/watch?v=zhkdOLXT6Eg

  I followed all the steps in the video, but after you have started and to complete the process of the Minitool partition Wizard I got this screen:

  http://i.imgur.com/bRnDQuJ.jpg

  This is what looks like my disk utility:

  https://i.gyazo.com/ee9967fc7ac9a2d1ad9afc5cde2f3529.PNG

  It seems that free space is always there

  Is there a way to fix this?

  MiniTool is not recommended because it causes problems and can lead to data loss.

  OS X Terminal please after the release of the following OS X Terminal commands. Enter your password when you are prompted by the command 'sudo '.

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  Do not change the partitioning information any more, otherwise, you will lose your Windows data permanently.

• How can I increase the number of tags shown down to the bottom of the list?

  When I go to bookmarks/Tags, there are only 10 tags displayed. I have created at least 15 tags.

  Is it possible to increase the number of Tags displayed in the drop-down list?

  Thank you

  Do you mean "Recent Tags", which has an icon a folder of blue color with a magnifying glass looking for primitive on the record?

  This folder has a limit of 10 results. If you want to create a "All the Tags" item in the Menu Boomarks, you can do this by creating your own "smart folder. The process I use is a little involved, if patient with me (also see the screenshots).

  The query used by the recent Tags is:

  place:type=6&sort=14&maxResults=10
  

  So, for all of the tags, we will fall on the maximum number of results:

  place:type=6&sort=14
  

  If you prefer your tags in alphabetical order instead of having most recently used in the upper part, use it instead:

  place:type=6&sort=1
  

  Go ahead and select the line you want and right-click > copy.

  Then, click the drop-down bookmarks menu, expand the toolbar bookmarks, right click on any existing element and choose new bookmark.

  In location, paste the query and in name, type all tags (or description of your favorite). When you click on Add bookmark, Firefox to add it, but it does not show the blue search folder icon. Drag the bookmark in the menu, and it will turn into a search folder works.

  Success?

• Solitaire T, pls help!... Can no longer start with Bootcamp after increasing the size of the partition with OSX El Capitan

  I hope that this message reaches solitary T and could help me.

  After an attempt to increase the size of my bootcamp partition, I can start is no longer with bootcamp, the same problems that many people lived in El capitan. I tried the instructions of solitary after but I'm stuck with this:

  1. boot in local restoration (command-R).

  2. start utility-> Terminal.

  3. type csrutil disable in the Terminal, and then press enter/return.

  4. type csrutil State.

  5 start normally, then type csrutil status to confirm that it is always disabled.

  I don't know what to do next.

  Would be grateful if I could get any help. Thanks in advance.

  BTW, I ended up remove the new partition created during the process.

  

• How to increase the resolution of the timer loop?

  Hi all

  I use myRIO 1900 for my project of Active noise cancellation. I need to process the audio signal @44. rate of 1 kHz sampling and 50 samples per image. So, I use myRIO personality of broadband.

  Now my problem is simple, I want to measure the time each iteration (loop). I went for the number of cycles normal (msec). Used as a standard [https://decibel.ni.com/content/docs/DOC-11078].

  But my value of the indicator oscillates between 1 and 2. It is supposed to be 1.13msec, but how to find the exact value of timer?

  I think, I can't increase the resolution of tick count (msec) as it is by default is 1 ms resolution and I can't use the clock source external I use myRIO.

  Help me calculate the precise time of loop.

  Thank you.

  RT has express VIs for timers.  You can use this: http://zone.ni.com/reference/en-XX/help/371361J-01/lvexpress/tick_count/