Windows could not install your tablet pc BC1077

Similar Questions

• Windows could not install your (CEWL 1) not found driver software for your device

  After you download sony_tvupdate_2012_1158_ucf_auth

  A new folder will be created called sony_dtv026000066006_00000301

  Inserted UWA - BR100 and received the following:

  Windows needs to install driver software for your (CEWL 1)

  Locate and install driver software (recommended)

  C:\Windows\system32\new dev.exe

  Windows could not install your (CEWL 1)

  Check the support section for driver software

  Insertion of USB causes the following message: not found driver software for your device

  Hello
   
   
  I would suggest trying the following methods and check.
   
   
  Method 1:
  Tips for solving common driver problems.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems    
   
   
  Method 2:
  Download the driver on the device manufacturer's website and install on your computer by keeping the computer in a clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.
  http://support.Microsoft.com/kb/929135

  Note: Please, go to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem.

   
   
  You can also refer to:
  Update a hardware driver that is not working properly. http://Windows.Microsoft.com/en-US/Windows-Vista/Update-a-Driver-for-Hardware-that-isn ' t-work properly

• "windows could not remove your homegroup computer.

  When you try to remove the residential group the computers on my home network I get this error message

  "windows could not remove your homegroup computer.

  Help is apreciated

  Hello

  I suggest to follow the steps provided and check if it helps.

  Method 1: Temporarily disable firewall and antivirus on each machine.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

  Method 2:
  You can also follow these steps and check:
  a. go to the control panel and access the system and security.
  b. go to administrative tools and then double-click Services.
  Locate and stop following 2 services, after that try to leave the homegroup. You can also set the startup type of the services to the people with reduced mobility.
  HomeGroup listener
  HomeGroup provider

  Links: I suggest you to see the link and check out the How can I remove a computer from a homegroup.

  Homegroup: frequently asked questions http://windows.microsoft.com/en-US/windows7/HomeGroup-frequently-asked-questions

  Leave a homegroup: http://windows.microsoft.com/en-US/windows7/Leave-a-homegroup

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• "Windows could not remove your computer from homegroup."

  I have a laptop and a desktop computer which have been the two participaing in a homegroup.  It no longer works, so I tried to "leave the homegroup" of these two machines, who intend to recreate.  Furthermore, standard networking and file sharing is always present.  The Bureau has allowed me to leave the homegroup, but I get the message "Windows could not remove your homegroup computer" on the laptop.  I ran several times the convenience of network with homegroup on both machines.  I also did some research and tried everything I could find on the web, without success.  Please tell me how can I reset the settings of homegroup on my laptop. Mark S. Freeman

  Here's a solution that might work.  It worked for me.

  "Studied the issue and found the solution. A file has been corrupted and remove he got running PNRP service. The file has been re-created correctly when the PNRP service started upward. Here is the file for future reference:

  C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore. OHS. "

  Solution given by Streetwolf on the Windows 7 Forums

  Link is below:

  http://www.SevenForums.com/network-sharing/29060-cant-start-peer-name-resolution-protocol.html

• Windows could not install windows on the computer

  husband tired of reformatting my computer after a few problems. The problem started after trying to do an update and the update has been slain at 40% and it has restarted computer and it wouldn't restart. Tried to go on safe mode and tried other things. He did come back to windows once, would not work usb. We have tried to restart the computer and it n go back t widows. We have tried to reformat, let it go overnight because he was taking forever. He said that windows does not have can install windows on the computer. And invite you to try again. What is the problem? Anything we can do? It has been 3 days trying to do things with her.  Can we get the new windows 7 and try of ti which install?

  Thank you

  Danielle

  Hello

  Here's how to clean install vista

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

• Windows could not install several updates

  My daughter portable computer has been impossible to install several updates in October.   More precisely, KB3000988, KB2984005, KB2972101, & KB2987107 install, however, they are the ones who install - I have been able to get the other ones installed.

  I ran windows update so that the PC was in clean boot mode (all unextinguished Microsoft services/applications).

  I also disabled Windows Defender (the only Antivirus which I'm running).

  I also ran the troubleshooting of Windows Update and there a number of things to be fixed.   I did this first and the updates still do not work.

  Here is a link in my event log

  https://onedrive.live.com/redir?RESID=5078BE589B6E628C! 4166 & authkey =! AHt4LZUYUo7r-Jw & ithint = the file % 2cevtx

  Here is a link to my system log

  https://onedrive.live.com/redir?RESID=5078BE589B6E628C! 4167 & authkey =! AMM-Cp12j8hjQeE & ithint = the file % 2cevtx

  Here is a link to my system info

  https://onedrive.live.com/redir?RESID=5078BE589B6E628C! 4168 & authkey =! APIKqjSx1-AzW1E & ithint = the file % 2ctxt

  Please let me know what I need to do about it.

  Thank you!
  Jason Keating

  misslouis - I've updated one of the PC to win 8.1 and stopped the updates failed.   I've also updated to another's and all seems good.  Thanks for the tips!

• Windows could not install the updates in January 2016, error 0x80071a2d

  updates this week seem to originally be a continuous loop of failed to configure updates - so far have had 4 systems with the same question.

  -historic events shows all updates fail to install with error 0x80071a2d - anyone else seeing this or do I have an idea about the update at the origin of the problem

  link to a disc with all the files, but have never heard any more

  I solved this by selecting manually an update at the same time installation/reboot - proceed through updates available every one at a time

• HP Pavilion g7-2043sf: Windows could not find a driver for your network card

  Model: HP Pavilion g7-2043sf

  Product number: B1P51EA #ABF

  Today, I did a clean install of Windows 7 on this laptop and I can't connect to internet via wifi. When troubleshooting I get this message:

  Windows could not find a driver for your network card
  Windows does not detect a network card is installed correctly. If you have a network card, drivers for the card cannot be installed correctly.
  Install a driver for your network card
   
  Collection information
  Windows Version: 6.1
  Architecture: amd64
  Time: Thursday, December 24, 2015 12:34:16

  In Control Panel, I found this information:

  Ethernet controller: the drivers for this device are not installed (Code 28)
  Hardware ID
  PCI\VEN_10EC & DEV_8136 & SUBSYS_1844103C & REV_05
  PCI\VEN_10EC & DEV_8136 & SUBSYS_1844103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200
  
  Network controller: the drivers for this device are not installed (Code 28)
  Hardware ID
  PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C & REV_00
  PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C
  PCI\VEN_1814 & DEV_539A & CC_028000
  PCI\VEN_1814 & DEV_539A & CC_0280

  I visited this side: http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g7-2000-Notebook-PC-series/5226249/model...

  I need all drivers of network?

  Thank you.

  Hello:

  You need these drivers...

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp55979.exe

  This package contains the installation package driver for Ralink Wireless LAN to laptop models controllers that are running a supported operating system.

  File name: sp58586.exe

• Error 0x8007054F code: could not install SP3 for Windows XP

  original title: error 0x8007054F code: could not install SP3 for Windows XP because of the Filec:\windows\system32\drivers\acpi.sys being open or being used by another application. "Internal error."

  I tried to install Windows Service Pack 3 for Internet Explorer8. When you try to install this "priority" update, it begins the installation process, and then returns could not install Windows Service Pack 3 due c:\windows\system32\drivers\acpi.sys file is open or in use by another application. Internal error 0x8007054F. The only thing I have running in this case is the Internet (where I go to get the update) and the windows installation progress. What should I do to get past this problem? Please help me...

  Your loyal customer

  Hello

  
  To work on the issue, refer these methods
  
  Method 1:
  
  Read the following article.
   
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  
  Method 2:
  
  Error messages when you try to install Windows XP Service Pack 3: "Service Pack 3 installation did not complete" and "an internal error has occurred."
  http://support.Microsoft.com/kb/949384
  
  Registry warning:
  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
   
  See also,
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717
   
  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718
   
  Hope the information is useful.

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)

• PC with Windows Vista does not restart after installing updates, "Windows could not start...". "File:\Windows\system\winload.exe status: Oxcoooooof.

  Last night, I installed Windows updates on my HP Pavilion dv6227cl and now Windows will not boot.  I get the message "cannot start Windows.  A recent hardware or software change might be the cause.  File:\Windows\system\winload.exe status: Oxcoooooof Info: the selected entry could not be loaded because the application is missing or damaged.  I DO NOT have the Windows Setup disc.

  Hello

  I suggest you borrow the CD of windows vista to your friends

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you be able to start your computer in safe mode, I'd say make clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to see link and check.

  Error: Windows could not start. A recent hardware or software change might have caused the problem after installing Windows updates

  http://support.Microsoft.com/kb/2674065

• Windows Live Essentials 2011 programs could not install error: 0 x 80096010

  ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
  SOLVED.
  I was right. The wlsetup - web.exe 1 MB file has been corrupted (or disliked my 3 pc at least). I downloaded the full stand-alone 210 mb file from this link and installed without problem. Now works.
  ++++++++++++++++++++++++++++++++++++++++++++++++++++++++

  Hello

  Live Mesh Beta is gone, I downloaded Windows Live Essentials. I got this error.

  Windows Live Essentials 2011 could not install programs.
  An unknown error has occurred. Error: 0 x 80096010
  Help items that are suggested here did not help
  http://screencast.com/t/gFNdolVBeik.

  It happens on my PC and laptop. I uninstalled both Live Mesh, but no change. I removed the other Windows Live from the PC programs. Laptop doesn't have these. Still no change.
  Both running Vista Home 32-bit.

  SOLVED.
  I was right. The wlsetup - web.exe 1 MB file has been corrupted (or disliked my 3 pc at least). I downloaded the full stand-alone 210 mb file from this link and installed without problem. Work now after a lost day. Your time also.

  Thanks for your efforts.

  Sidenote: MS should really give a possibility to download the full file rather than download 210 mb on each computer.

• Error message when opening the parts attached Windows could not perform this operation because the explore default e-mail client has not been installed correctly.

  Original title: fault of the Explorer

  How can I solve this problem.

  Sometimes when you try to open an attachment, I see this message:

  Windows could not perform this operation because the explore default e-mail client has not been installed correctly.

  Thanks for your HELP!

  Hi Robert,.

  Thank you for your response.

  Please let us know if you need help with Windows, we will be happy to help you!

• units Windows media center update the site saying "We could not process your order."

  I am trying to get a product key for the media center upgrade to windows 8 pro. I have two computers that I have upgraded to Windows 8 pro, so I used two different emails. The first computer I've updated went well, I asked for the key and a few days later he appeared in my Inbox, and I upgraded without problem. I asked a product key for the second computer (with a different email) more than a week and it never came, so I tried again and any email you enter on the site, it says "We could not process your order." Unfortunately, I tried the first product on the second computer key and allowed me to upgrade. The only problem is, I got a screen that says product key is already in use, and now my computer asks me to activate windows all the time. As far as I know, there is no way to fix it without the product key. I can't even return to regular windows 8 pro with a clean install, because I downloaded windows 8 pro without a disk.

  Hi all

  You may reach the Service the customer to know that you run in here. You can find information about this for your region below:

  United States: 1-800-Microsoft (642-7676)

  Canada: + 1 877 568 2495

  Comprehensive list of phone numbers can be found here.

  Sincerely,

  Marilyn

• iMac14, 4 have message "Could not install Windows 10" during the update to build 11099.

  iMac14, 4 have message "Could not install Windows 10" during the update to build 11099 and get the error message "this device is not compatible on Windows 10. Contact the manufacturer for more information. (Network Broadcom 802.11ac adapter) ».

  Picture to describe the problem: http://i.imgur.com/H0SlKd6.jpg

  I think you need to contact Microsoft.