increase the size and resolution (adobe draw android)

Similar Questions

• Change the size and resolution

  I have a jpg image which is about five inches square to 500 dpi. I would like to enlarge the image as far as possible keep the resolution suitable for printing at 300 dpi.

  I've linked the resolution setting, but the image is reduced in size. Do I need to enlarge the image first? I'm not sure how much. Or y at - it a button that will do it for me? Thank you.

  When you choose Image > size of the Image, if it indicates the width and height 5 inches and 500 pixels/inch resolution, when you uncheck resampling and resolution, type 300, that will increase the size in inches 8,333 each side that is the maximum size you can get with 300ppi without using interpolation (changing the number of pixels shown in the section of the Dimension in pixels of the window the size of the Image).

  You can increase the size by using the interpolation, which is what happens when resample is checked. To increase the size, you can choose Bicubic Smoother (best for enlargements) in the menu at the bottom of the window to the size of the Image. But what will be the outcome depends on the distance of visualization of the printed image, your standards of enlargement, and the details on the image itself - for example, if it is an image of a foggy environment, the size can be increased much more without noticeable loss of details as opposed to an image with strong contrast details.

• Trying to increase the size and a printing of tiles.

  Hello

  I have a file with the work plan in 8 "high by 36" wide. It's 1/10th the final size (its going to be a huge mural where 1 "= 1'). In any case, to get an idea of what the text will look like when printed full size, I've been printing out parts of the file to be 1000% increased scale and tile and glue the papers together. It worked perfectly until I saved the file in PDF format (to the size of the artboard of 8 "x 36"). Now, when I load my file HAVE original and try to scale, of tiles and print... I can't. The TILE option is completely grayed out, unselectable.

  Someone knows why this happens? I closed and reloaded IT and I'm working on a Mac.

  Thank you

  Chris

  You are on CS4 and your document has several plans work? If that's the case then select ignore the work plans of the print dialog box

• How can I find the size and resolution in th crop tool.

  

  I can not find?

  It should be the second option in this menu.  Select, and then enter the width, height and resolution in the menu bar.

• I have a laptop on screen high resolution (3200 x 1800), how can I increase the size of text and the tool bar in the workspace of Photoshop?

  I have a laptop on screen high resolution (3200 x 1800), how can I increase the size of text and the tool bar in the workspace of Photoshop?

  If you have CC2014 you can try the experimental 200% upscaling setting in preferences:

  

• Increase the size of the police [Android]

  I use Adobe Acrobat Reader for Android on an S5 Galaxy running on Android 5.0. How can I increase the font size of the manuals in pdf format without having to scroll back to read the whole sentence.

  In addition, what to do about items pdf pages are divided into two columns other than buying a great tablet.

  Hi Lisa,

  You can improve the experience of view PDF using the settins of view mode. Press anywhere in the PDF file and it will bring a set of tools at the bottom left. Type on display mode down icon to the left and select the text reflow option. This will be redistributed the text for better readability. If you want to increase the size more then double tap on the PDF and it will increase the size.

  You can also refer to this: Acrobat Reader for Android help: Set Viewer options

  Thank you

  Abhishek

• How can I increase the size of the font of the text in the WORLD WITHOUT changing the DPI or RESOLUTION?

  This question was asked a thousand times.  I searched for hours and can't find a correct answer.

  I want to increase the font size in all of windows.  The default 9pt is TOO SMALL TO READ at least THAT YOUR FACE IS<12" from="" the="">

  For example, the clock in the lower-right. Or, the dialog boxes when you hover over something like the button start, or help him at question mark, etc.

  Another perfect example: right-click the taskbar, open the taskbar and Start Menu Properties window.  I can not READ anything IN the BOX of THIS exception to its title, which I have increased in the Adv. App. Settings.

  DOES ANYONE HAVE A SOLUTION TO INCREASE THE SIZE OF POLICE FROM 9 TO 11 OR 12?  ANYONE? BUELLER?

  I found a thousand INACCURATE responses.  Please do not repeat them here.

  1. I didn't WANT to INCREASE DPI.  If it was a solution, would not prompt warning about things arise.
  2. I didn't WANT TO CHANGE MY RESOLUTION.  There is nothing wrong with something else in the image on the monitor except Windows chose 9pt as their default font size.  That the LETTERS are too small; nothing else needs increased.
  3. I was for of APPEARANCE ADVANCES SETTINGS under personalization and change what you can change, which limits itself to the Menu, title bars, ToolTip and a few others.  THIS IS NOT ENOUGH.
  4. I tried the regedit merger to change the font from Segoe, Verdana, but it's still at 9pt, so it is still TOO SMALL.

  Thanks in advance for any helpful information.

  Hello

  In addition to the suggestion of Dissed, you can try this:

  You can hold down the CTRL on the keyboard and use the wheel to magnify the entire screen with just scroll.

  I hope that helps!

   

• Export in Lightroom and the size of resolution

  Hi all

  I have a recent Bridge/Photoshop convert Lightroom/Photoshop. I want to start using Lightroom to resize my images instead of Photoshop. But, if I really crop an image and export to 1440 x 960 (at 150 PPI), I run the risk of resizing the image, I don't want to. I understand that there is the "don't resize" button in Lightroom.

  My question: what is ignored if Lightroom needs to increase the size of the picture based on my entries and that "do not resize" is checked?

  Here is my old workflow in Photoshop (customer wants these dimensions)

  RAW: 5184 x 3456 at 300PPI

  Resize to 150 DPI (which becomes dimensions 2592 x 1728)

  Resize to 1440 x 960 to 150 DPI

  Save in sRGB JPG

  But, sometimes, if I really crop an image I can't get 1440 x 960 at 150 DPI and must keep the PPI to 300.

  ....

  If I export an image really cropped in Lightroom to 1440 x 960-150 DPI (not resizes not verified) and it cannot meet the dimensions to this resolution that get is ignored?

  Nigel1985 wrote:

  Here is my old workflow in Photoshop (customer wants these dimensions)

  RAW: 5184 x 3456 at 300PPI

  Resize to 150 DPI (which becomes dimensions 2592 x 1728)

  Resize to 1440 x 960 to 150 DPI

  Save in sRGB JPG

  The customer wants what dimensions? If it is for the use of the layout or print a specific dpi AND size in inches must be specified. I suggest to ask the customer to provide both of these numbers.

  In your example above, here is what you have:

  2592 x 1728 @150 ppi = 17,28 in. x 11.52 in. Until the client tries to do? Makes no sense!

  If you specifically want an image which is 1440 x 960 @ 150 dpi, and then use the suggestion provided by 99jon.

  "Simply export from the original raw file and choose 1440 long edge & 150 ppp."

  About cultures that causes the image is expanded you will know immediately if the Cropped Dimensions as shown in the LR library module are less than 1440 x 960. Use the 'I' key to switch the Loupe selection of information if you do not see the cropped size.

• Change the size of resolution and the Document

  Hello - I have a jpeg file from a digital camera that I saved as photo.psd with a size of original Document of 44 "x 66" @ 72 DPI of resolution.

  I use CS3, and I want to prepare the image for printing while maintaining the best possible quality. The first thing I've done was uncheck resampling. Then I changed the resolution to 300. This gave me a 10,56 15.84 x Document size.

  I want to increase the size of the Document to be 16 "x 24" (the same proportions). So it seems to me that the next step must now verify the resampling and put in my new 16 "x 24" Document format. I would apply then a few unsharp mask as desired.

  So, is it Ifollow steps above or do you recommend a different workflow?

  I read that Photoshop will be n very well up to 200% and all I need is 166%, so it should work ok. Also, do you recommend standard bicubic and bicubic smoother?

  TIA

  What you are suggesting will work, even if you don't really need to do it in several steps.  A single step, with resampling check, once you set all the fields you want, will do the trick.

  And for all the hype and mystery surrounding the two alternative choices for resampling, in all my works for minor resampling I always find that I prefer the original Photoshop bicubic method.  To increase the extreme resolution personally, I prefer only a plug-in called Genuine Fractals.

  Also, modern print drivers become very good at matching size...  If the quality of the image in your file is to your liking, you COULD just set the size in inches (without resampling) printing and do with it.  This would give an image to less than 300 pixels/inch resolution, but you would save some work, and it may well be that you will not be able to see a difference in leaving the pilot to make the resampling as needed.

  -Christmas

• I use a 43 in. TV as monitor and have trouble reading the text in the drop-down menu (file, editing, display etc.) boxes. Is it possible to increase the size?

  I downloaded the theme and font size changer, but I cannot increase the size of the text in the drop-down menus. I sit 10 ft away from the TV with a wireless keyboard. Even when I Zoom on the page of the menu drop-down does not increase in size. With the help of a mini Mac OSX 10.3

  I think that the solution is a TV 60 ", but I hope we can find a more affordable solution!

  I think that the menu bar on Mac OS X.

  [Apple] Window helps the Firefox Edit View History bookmarks file tool

  -wouldn't be likely changes via an add-on or a parameter of Firefox.

  However, as a Windows user, I am at a disadvantage by experimenting.

  I've seen a number of discussions on the forums of Apple, without a clear solution:

  • How can I increase the font size in Yosemite? Apple Support communities -links to articles with suggestions
  • How can I increase the font size in the menu bar and... | Apple Support communities -said to contact Apple support solved the problem (does not mention Firefox, however)
  • Yosemite: how to increase the menu font size? Apple Support communities -suggests a change in police, as well as many other discussions

• I have a laptop 1b60us g6 (2 weeks) and I can't increase the size of the text on the home pages,.

  I can't get the text size to increase on my laptop, I tried to go to the Panel and increase the size here but it does not work, type is if small that I can't read much, it just happened one day and I can't fix it.

  Hello

  Have you tried to use this:

  • CTRl key and press + (plus sign) or
  • Hold down the CTRL key and roll the wheel mouse

  Kind regards

• increase the size of the icons on the tookbars and the taskbars in Windows 7

  Help!   I asked about this before and I followed the instructions and I it has not resolved.  I want to increase the size of the icons on the tool bar and the taskbar.  Smitty sent a response making me refers to Sevenforums.  and I tried to follow, but I do not really understand.  Y at - it an easier way to do it.

  Hello

  Window color and appearance in Windows 7.  You will see the steps to modify various items in Windows 7.

  http://www.SevenForums.com/tutorials/282-window-color-appearance-change.html

• How to increase the size of our C drive of 40 GB to 100 GB and the rest as logical drive D without using any third party tool, it is possible in the environment of windows 7 ent

  My dear, we are usning a custom image for our environment with win 7 ent deployed for all our computer network, in our customization take us C 40 GB and D drive 425GB space now, we are facing problem with the most complete C drive we had to move, and increasing the size of our disk of 40 GB to 100 GB and the rest as logical drive D without using any tool from third party , it is possible in windows 7 environment ent if so how please send procedure

  Original title: move/resize

  You will have to go on Support of Windows 7 forums on the following link to help solve your problem: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

• Printing win 7 guest, the printer queue maintains a loop and increases the size of the file

  Hi all

  That are running Windows 7 enterprise and on another professional machine, same results:

  I share a "laser" on the USB printer, the printer works very well under windows prgms...  (all as administrator)

  Open CMD window:

  "net use LPT2: \\hp1\laser / persistent: Yes" command complete and looks good in "Net view \\hp1".

  Now, I open the print queue window and try printing a text file:

  "print test.txt > lpt2" command appears to complete.  (Same results for copy, etc.)

  I now see the file appear in the print queue, flashing, saying: rolling/printing, repeating & loop, and each Flash increases the size of the file!

  I tried to change the Port LPT1 and 3

  Nothing prints, because I have to stop the spooler, delete the file, start the spooler to clear.

  What happens on two different machines, I'm totally stuck!

  Help appreciated!

  Hello Stan,

  Thank you for visiting the Microsoft Community Forum.

  The question you asked is more complex than what is generally answered in the Microsoft Community Forums. We have a support forum dedicated to complex issues. I suggest you to send your query on Microsoft TechNet forum. You can get more effective suggestions and adapted by experts familiar with this topic. Your understanding is appreciated.

  Here is the link:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itprovirt

  Hope this information is useful. Feel free to write us again to the case where you are facing in the future any other problem with Windows. We will be happy to help you.

• Fuse Adobe: How can I increase the size of the eye?

  Have you ever seen anime before? Japanese anime? have you noticed how their characters have big eyes? How to increase the size of the eye? the controls I found were customizations ON the eye, but not the eye itself and thank you.

  The eye behaviors are under the drop head. This is the size of the eye for the girl Elf.