Increase the time of splashscreen

Similar Questions

• Increase the time of the ring on the phones of the Agent

  Hi Pros,

  I have an IPCC Express 4.0 Setup with CAD 6.1. When calling gets queued to an agent, if he does not respond within 3 rings, calls is redirected to a next available agent & agent moves to the State is not ready.

  Now, I want to increase the 3 rings to 5 rings. Is this possible? And if yes, then how do I do the same thing?

  Kind regards

  Pratik

  In the properties of the 'resource step select' or 'Connect' If you 'Connect', false to step "Select resource" you will see a 'Timeout' field The default value is 10 seconds. It is what controls how long the phone will ring at the Office of agents.

  Make sure that the timer is less than the response of IP phone ring if you have voice mail online agents (I recommend to have no voicemail on the line of the agent).

  See attached screenshot.

  Please evaluate the useful messages.

  adignan-

• No trace of the battery - only part of the time with SplashScreen

  Hi all

  I have some intriguing problem. I am loading an app will a splashscreen and about half the time I don't get a stack trace of error. The splashscreen is pressed while I get the data and images on a remote server, and then analyzing the data. This is the code that I get a no stack trace:

                      _app.invokeLater( new Runnable() {
                          public void run() {
                              // This represents the next step after loading. This just shows
                              // a dialog, but you could push the applications main menu screen.
  
                                  try {
                                      getUiEngine().pushScreen(new DirectoryScreen(sqlmanager));
                                      _app.getActiveScreen().getScreenBelow().close();
                                  } catch (Exception e) {
                                      // TODO Auto-generated catch block
                                      System.out.println("in the runnable exception: " + e.getMessage());
  
                                      e.printStackTrace();
                                  }
  
                          }
                      });
  

  As a general rule, the error message is something like "the runnable exception: Index - 3 > = 4".

  Help!

  Check the code in DirectoryScreen. Use a step by step debugging...

• BlackBerry Smartphones, increasing the time of the ring on Pearl 8110 smartphone

  My phone only rings 3 times before going to voicemail.

  Other mobile phones that I used was an option to set the time that the phone to ring for seconds (usually up to a maximum of 30 seconds).

  Anyone know if this option exists on the Pearl 8110 smartphone?

  Sort this sorry.

• How to increase the time of validation in oracle?

  Dear Oracle Guru-
  
  My database is OLTP system.
  
  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production
  PL/SQL Release 11.2.0.2.0 - Production
  CORE Production 11.2.0.2.0
  AMT for Linux: Version 11.2.0.2.0 - Production
  NLSRTL Version 11.2.0.2.0 - Production
  
  The time of the validation of each transaction is currently 20-30 milliseconds. Is there another way, we can improve the time of validation?
  
  I understand that the time of validation is quite reasonable. But is there another way, we can inprove the moment of validation?

  user8904001 wrote:
  Dear Oracle Guru-

  My database is OLTP system.

  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production
  PL/SQL Release 11.2.0.2.0 - Production
  CORE Production 11.2.0.2.0
  AMT for Linux: Version 11.2.0.2.0 - Production
  NLSRTL Version 11.2.0.2.0 - Production

  The time of the validation of each transaction is currently 20-30 milliseconds. Is there another way, we can improve the time of validation?

  I understand that the time of validation is quite reasonable. But is there another way, we can inprove the moment of validation?

  But what exactly is the time you are looking for? The reason for asking is that now the time is 20ms so exactly what point would be a suitable time? For the improvement of the validation, a possible solution would be to move the files, redo log on faster SSD support, but it's a statement very very generic and should be taken with a grain of salt.

  HTH
  Aman...

• How to increase the time that the viewfinder display is turned on (T3i/600 d)

  Hello!

  This seems to be a very basic question, but after searching for the manual and the web, I can not find an answer.

  When I press and release the shutter, the camera button turns on the viewfinder screen that shows the shutter speed, openness, indicator of level of exposure and ISO speed. But it turns off automatically after 4 seconds. I looked in all the menus and I can not find how to increase this timeout so that the information is displayed for a longer period of time.

  Help?

  Thank you!!

  I don't think it's an adjustable value.

• How to increase the time-out value for more than 15 seconds?

  Find a web page expires at 15 seconds. I want to set the timeout for a longer period of time. I don't find a place to do this in the Options. When I go to full pages, I want to continue to try more rather than keep hitting the Try Again button.

  The parameter for which is not in Firefox, it must be changed in Windows.

  http://drewthaler.blogspot.com/2005/09/changing-DNS-query-timeout-in-Windows.html

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DNSQueryTimeouts
  Multiple string: '0 1 2 2 4 8'-> "4 8 8 16 32 0".

• increase the time settings for the 60 minutes to 2 hours sleep function

  MODE 'SLEEP' 60 MINUTES, MY COMPUTER TURNS ON, WANT TO CLUTCH TIME TO 2 HOURS. HOW TO DO THIS.

  Hello

  Control Panel - Power Options

  These show you how:

  How to change the power Plan settings in Windows 7
  http://www.SevenForums.com/tutorials/778-power-plan-settings-change.html

  How do I change the sleep settings in Windows 7
  http://www.brighthub.com/computing/Windows-platform/articles/60294.aspx

  I hope this helps.

• Anyone know how to increase the time that the viewfinder display is lit SC60 Canon?

  Hi I have problems, like a beginner redn the message through the viewfinder of the canon HS SX60

  Can someone show video mw or some instructions, I have the complete PDF manul for this, so stay on the screen the messages and won't disappear until I read their

  I am limited visioon being blid in my right eye, but I can still see if the viewfinder

  Help with messages left the lights on and their setting, power off or even extension of time that they are indicated could dramatically help me

  Thanks if cn nyone help and I thank if they can't, it's my first foray into digital SLR cameras, has been used for camcorders only before today

  Yuu thank you and God bless and Happy new year snappin thanks and appreciation

  Star

  I don't know exactly, but several times now the halfway retains active views.

• Increase the time-out value of external WF stubs in vRA 6.2 device?

  The stubs of external workflow (BuildingMachine, MachineProvisioned, etc.) are defined to use a time-out of 30 minutes by default. It seems that other people change delays via a XML configuration file (see "example XML configuration file" in this post: Creation of Workflows for change state), but all of the examples use a Windows Setup and the file does not exist in the device of vRA.

  Does anyone know how to set timeouts, perhaps through custom properties or something?

  Thank you.

  Someone else has this problem, I found the file. The XML file is the server of IaaS in the following location: C:\Program Files (x86)\VMware\vCAC\Server\ExternalWorkflows\xmldb\ExternalWFStubs.xml

• I can increase the time that EBS can remain idle before it disconnects a user?

  I searched the forums, but have not found a method, although I think it's probably easy to do. Any idea would be appreciated.
  
  Thank you
  
  -Adam

  Hi Adam,.

  See the following note:

  Note: 269884.1 - how to solve the problem of time-out for forms in the Oracle 11i Applications
  https://MetaLink.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=269884.1

  Kind regards
  Hussein

• How to extend the time while I logon?

  While I'm connected to the internet, it will be automatically disconnected if I take a break away for a minute or two. I'll have to start all over again by logging on. Is it possible that I can increase the time while being connected?

  Hello

  1. what version of Windows operating system do you use?

  Click on the link below.

  http://Windows.Microsoft.com/en-in/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  2 are you referring to log on to a secure Web site using Internet Explorer or Windows logon?

  3 have there been any changes to your computer until the problem occurred?

  4. is your computer connected to a domain that is part of the network maintained by a system administrator or is a stand-alone computer that is used at home?

  5 are you facing this problem only on a few sites or all sites that you visit using Internet Explorer?

  6. the problem occurs all trying to you connecting to a Webmail client or by e-mail?

  7. what application is that it helps him connect to the internet?

  Your question does contain all the required information necessary for us to help you. Please provide more relevant information to continue troubleshooting as a result.

  See the link below on how to ask questions or help on the Forums.

  Suggestions for a question on the help forums.

  http://support.Microsoft.com/kb/555375

  Hope this information helps you.

• increase the timeout limit

  so my games as often crushing DOTA 2 and when I look at the error up on NVidea it SAIS:

  "The driver NVIDIA OpenGL lost the connection with the display driver due to the Windows time-out limit and cannot continue.

  The application must close. »

  How can this be repaired?

  Two possible solutions to try would be:

  1 reduce the workload graphic if possible, such as rendering to a lower resolution or with less detail.
  2. increase the time-out period to allow more time to complete parts made it very difficult. Microsoft provides information about how to edit the Windows registry to achieve this.

  now how can I increase the timeout?

  so my games as often crushing DOTA 2 and when I look at the error up on NVidea it SAIS:

  "The driver NVIDIA OpenGL lost the connection with the display driver due to the Windows time-out limit and cannot continue.

  The application must close. »

  How can this be repaired?

  Two possible solutions to try would be:

  1 reduce the workload graphic if possible, such as rendering to a lower resolution or with less detail.
  2. increase the time-out period to allow more time to complete parts made it very difficult. Microsoft provides information about how to edit the Windows registry to achieve this.

  now how can I increase the timeout?

  Hello

  The first thing to do is to consult the manufacturer of the graphics card to ensure that you have the latest driver installed.

  To change the graphic medium time-out period, follow these steps.

  1. Exit all applications and programs.
  2. Press the Windows key + R to display the run dialog box.
  3. Type regedit.exe , and then click OK to open the registry editor.
  4. Navigate to the following registry key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\GraphicsDrivers

  1. With the GraphicsDrivers selected key, on the Edit menu, click new, and then select the following registry value in the menu drop-down specific to your version of Windows (32-bit or 64-bit):

  (NOTE: TdrDelay name is case-sensitive)

  For 32-bit Windows

  a. select DWORD (32-bit) value.

  b. type TdrDelay as the name , and then click on Enter.

  c. double click on TdrDelay and add 8 to the given value and click on OK.

  For 64-bit Windows

  a. select QWORD (64-bit) value.

  b. type TdrDelay as the name , and then click on Enter.

  c. double click on TdrDelay and add 8 to the given value and clickOK.

  Close the registry editor, and then restart your computer for the changes to take effect.

  Let us know the results.

  Concerning

• How can I change the time on dvd recoding Virgin?

  DVD + R 4.7 GB is approximately 120 minutes of recording of the time, but can be stretched to 240 minutes or 360 How can I do this on windows media player?

  I'm @ home on another DVR DVD and it offers you the ability to save 120,240,360 minutes to make good use of the disk space available on the DVD + R that is why

  I know that this is possible. For example, instead of 2 hours. You can do 4 or 6. Hope, this helps you to answer my question.

  =========================================
  I used to have a DVD/VHS recorder copy VHS
  bands on DVD... and like you said... it would record 2/4/6
  hours... just like recording on the old VHS tapes.

  I didn't know of any software that would allow a lot
  compression when burning a DVD on a computer.

  The free DVD Flick has an option that allows you to
  The Bitrate to be adjusted so that you can increase the
  time, but this is no the case nearly 6 hours.
  (Project settings / video / Target Bitrate)

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD-flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Download from (direct link) is the fastest).

  Good luck...

• How to increase the timeout for download on GBA?

  Hello

  We try to download a large file (50 to 75 MB) PDF to our Association. But we have always had an HTTP timeout. Send us the request typical HTTP POST to .../Packaging/Package with some parameters.

  I think there should be some options for the packaging.conf file in / etc to increase the time-out period. But unfortunality I wasn't able to find these options in the documentation. Maybe I'm blind too.

  Can you help me please? Is there a list with all the options for packaging.conf, fulfillment.conf and admin.conf? May I can find other interesting options in this list.

  Thank you in advance!

  Kind regards

  Nicolas

  I upload the file via SFTP in a location known and accessible to the service of packaging and if you send the application package using the dataPath option, not the data option.
  This will also help with the use of memory on the server package.