Increasing hard drive size of problem

Similar Questions

• Maximum HARD drive size on a Satellite 1110-Z16

  Hello!

  What is the size of the disk HARD Maxx in a Satellite-Z16 1110?
  Is it possible to install a 120Gig Hdd(2,5")?
  Is there a description for 1, 50-TRAD Bios Update?

  Hello

  I don t think that this laptop and the BIOS will recognize 120 GB HARD drive.
  According to some information in the internet, the phone supports up to 40 GB HARD drive.
  The problem is that Toshiba does not have official information about the sizes of disk HARD max.
  It seems that you have to test

  For BIOS update checks please this document:
  How update the BIOS on my Toshiba laptop and where can I get the latest version of the BIOS for my machine?
  http://support.toshiba-tro.de/KB0/TSB4A00SD000BR01.htm

• Is it possible to analyze infrastructure were returned by the device of scanning the hard drive size/capacity

  Is it possible to analyze infrastructure were returned by the device of scanning the hard drive size/capacity

  Well, Foglight can certainly, as indicated above, Robert fired in a mode without agent disc information.

• Erase a hard drive because of problems with lag/rotation of the Apple balls, but my CC apps have disappeared.

  Hello

  I had to wipe my hard drive due to problems of lag/spinning apple apps balls/does not respond.  Now my second download of CC on this computer have disappeared and when I go in the CC Manager, I can only download an evaluation version or buy.  I pay every year for my CC apps.  What can I do to get back them on this computer again?

  Thank you.

  Hello

  I don't see any subscription on your email address associated to your Forum ID. However, if you have a subscription with any other email address please use to download creative cloud desktop application using the following link https://creative.adobe.com/products/creative-cloud

  If you have already downloaded the desktop application and deal with the issue of the trial error please follow the steps mentioned on the following links

  Advanced solutions for connection with Adobe Creative Cloud and Creative Suite applications errors

  Resolve error messages and issues (disconnect) deactivation and activation Adobe Creative Cloud (login)

• Envy 17 t J000 - maximum hard drive size and speed

  I'm going to put a 2nd hard drive into the open space in my Envy 17 t-j000.

  The States of Maintenance and Service Guide;

  Hard drives Supports 6.35 cm (2.5 in.) 9.5 mm hard disks (. 37-in) and thicknesses of 7.0 mm (. 28 - in) (all hard drives use the same bracket)

  Customer-accessible

  Serial ATA

  Supports the following drives:

  ● 1 TB 5400 RPM, 9.5 mm

  ● 750 GB 5400 RPM 9.5 mm

  ● 500 GB 5400 RPM 9.5 mm and 7.0 mm

  Configurations to two hard disks:

  ● 2 TB: (1 TB 5400 RPM x 2)

  ● 1500GO: (750 GB 5400 RPM x 2)

  This seems to mean that I cannot use a single hard drive 2 TB 2 and cannot use a 7200 RPM drive.

  Is this correct? Bios denominator do not allow more than a drive of 1 TB or the 7200 RPM?

  CouldI partition just the 2nd 2-1 TB disk?

  Or the manual simply means that the standard unit of HP is not provided with larger than these sizes and I could actually use a 2 TB in the Bay of 2nd?

  It's the last... the list says just what HP sale: it does not describe a limitation of the system. However, I do not think that yet, the market offers a 2 TB drive that fits the available space. 2 TB 2.5-inch SATA drives I've seen are too thick. 7200 rpm or hybrid SSD; No problem.

  To add a second drive you'll need a second hard drive enclosure and cable.

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info&cPath=2_5&products_id=542

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Satellite Pro L300 - new partition after Exchange of HARD drive sizes

  Under 'Vista' with a 120 GB hard drive and needs space.

  Bought a 500 GB SATA drive. I'm afraid that the recovery software will set the new drive with a 50-50 Partition. This is the case or it will allocate 50 GB to E: / and the rest to C: /?

  As the manual States that if I change the size of the partition the recovery software will not re - install in the future?

  Hello

  As I know the Toshiba Recovery disk always allocates 50% disk space for each partition. This means that the 500 GB drive you have two partitions with ~ 250 GB of disk space on each partition.
  If not or you want to change something, you can use the Windows disk management tool:
  http://APS2.toshiba-tro.de/KB0/TSB7101OB0006R01.htm

  I think the manual means that you can use t more the procedure for recovery of HARD disk if you change the size of the partition.
  But with the Toshiba disk recovery you are on the safe side and so you can always restore the factory settings every time. :)

• HARD drive size should I use with Satellite 1800 504?

  What size of hard drive can I install on this laptop?
  One installed is only 15 GB.

  You can use the 30 GB HARD drive. For example, Toshiba HDD2159B.

  Good bye

• Satellite 1700-400: maximum hard drive size!

  Hello

  A late response.
  A half year ago, I asked about the maximum size hard drive for the Satellite 1700-400
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=17328

  Originally it is a 10 GB HARD drive, but now there are no more small hard drive available, so I bought a 80 GB
  and it works perfectly. :)

  grobi Oxford

  Hi grobi

  Thanks for sharing this info with us. It of always good to know what's possible and what's not. Thank you once again ;)

• Help a fool please ~ deleted partition, lost the hard drive size

  I'll try my best to make this as clear as possible, thank you for your time...

  Received my free copy of windows 7 home Premium

  Wanted a clean install (not an upgrade)

  Back up all the data and the programs that I installed

  During the installation of win 7, I deleted the recovery of the system partition and the 2nd partition of my HARD disk (has been labeled d, came that sort of lenovo factory, had 70 GB size I think)

  I thought that if I deleted the partition of the hard drive space would be added to the 1st partition and it did not

  Have materialized with the installation of win 7, and now I just have never found my C: and the GBs of the 2nd old partition so its as if I lowered my total HARD disk size

  How can I get my C: to have all of the 320 GB? Thanks for any advice!

  You can allocate the unused disk space as follows.

  Start > run > diskmgmt.msc

  Right-click on the Windows partition [should be C] and click on "expand". Extend partition as needed and enjoy.

• Pavilion G6t-2200: replacement for the hard drive g6t-2200 problem

  Original hard drive failed completely. Have inserted 3 different drives in this laptop and BIOS doesn't recognise it, even a brand new 500 GB drive.

  Any suggestions on how to get this pc to recognize a replacement disk would be appreciated. I buy HP recovery CD and they do not work on it because of this problem.

  PS the pc was working fine until the original disc is dead so I suspect not the motherboard.

  Hey @DaveTully,

  See if the BIOS is set on and switch to whatever that is not defined on the secure boot or inheritance.

  Here is a guide on how to do it: Computers HP - Secure Boot (Windows 8)

  Please hold me.

  By pressing the Thumbs Up button below, you can always say thank you!
  
  See you soon.

• HP Pavilion dv9500 hard drive, speed + other problems

  I time it has mine HP had some problems

  I rebooted with installing windows 7 again.

  Then I get a lot of problems, it was the hd which gives the problem

  When I look at true hd, I saw that it is not the normal SD but SATA 7 connection

  I have two vertex 3 60 GB SSD and they go instead of hd perfectly.

  The problem is the connection to this SSD

  I have this good connector?

  http://www.eBay.com/ITM/SATA-hard-drive-connector-adapter-for-HP-Pavilion-DV9000-DV9500-dv9700-/2612...

  This SSD will work with the HP Pavilion DV9500?

  This SSD is perhaps to fast for HP? Maximum transfer for hp is 1.5 Gb/s, I think

  How many MB is it?

  When I install Win7 with latest drivers.

  laptop processors work around 50-70% without any program is launched!

  I worked more then a week to find new drivers, why HP not with a program to update this driver is automated? The HP update works not at all, he said, everything is ok. But with a pilot programs, it finds more then 40 drivers unupdated!

  I see mine laptop with 2 GB of ram, startup, there are already 90% used.

  Is it not better to change the ram to 4 GB? because it's only $ 28

  What is the good ram?

  http://www.eBay.com/BHP/PC2-6400-DDR2-800-MHz-RAM

  When I give mine for problems HP laptop I recover it with a working DVD drive step.

  The DVD player can read compact optical disks but not read or write DVD.

  What can I do?

  Can I change the DVD player. Are their sold somewhere?

  You have a lot of questions here. Firstly, Yes, the connector of the drive hard eBay is the right and it will work on any SATA including SSD drive. I think the DV9500 and more it is SATA 2 (3 gb/s) interface, but it's not really important. A 60 GB SSD will not be enough space.

  HP does not have updates of driver for this machine for quite a while. I wouldn't too much stock in these update pilot programs that you download from the Internet. Indeed, they often contain spyware that could explain why you have high CPU utilization. If you can give me the exact model number or at least tell me if it is an AMD or Intel version we can get better drivers. The pilots of two wholesale to be aware of are the chipset and video drivers. If you have the AMD driver chipset nVidia processor must be specifically responsible. Windows it will not pick up. You definitely need at least 4 GB of RAM, and Yes, you use the DDR2-800 SO-DIMM. Also, you should install 64-bit Windows 7.

  This is a DVD burner. The façade can be a different color, but you can reverse your.

  http://www.eBay.com/ITM/448006-001-HP-read-write-DVD-CD-combo-drive-DVDRW-high-def-DL-Pavilion-dv9500T-/321046813952?PT=US_CD_DVD_Blu_Ray_Drives&hash=item4abfe19d00

  Easy to replace. Just return the laptop and look for a screw in the center of the bottom panel. It will have an icon of disk beside him. Remove the screw and slide the drive.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• RT - etspc - hard drive (size)

  Hello

  I created my goal of RT on an old computer, which meets the requirements of the document

  http://zone.NI.com/DevZone/CDA/tut/p/ID/8239?OpenDocument

  and everything works fine with LabView RT 8.6.

  Now, I'm going to prepare a new goal of RT with LabView RT 8.6 on a new computer. I found already all components required are compatible, but I struggle to find (buy) a hard drive with the size smaller than 126 Go with respect to this document.

  Might be possible to buy a 250 GB HDD and diveded small partitions?

  Or should I take an old hard drive for example from an old computer, which has the corresponding size.

  Thank you

  Hi zial24,

  LV in real-time is not supported RAID.

  We studied actually add RAID in LabVIEW Real-time several times, but the question that comes up every time is that most RAID controllers are owners and require the development of drivers for each of them, otherwise we would have to apply or our own solutions software RAID mainly only the port.  We prefer to work with a single hardware RAID where the RAID controller would manage disks and provide an interface of type SATA usable by the operating system.  Offers of products that we (as in NOR) for PXI include PXI-8260, but this product is a software management JBOD (Just a Bunch Of Disks) and isn't really a "RAID", since there is no fault tolerance (e.g. mirroring, parity, etc...).  Additional offers in the PXI-8162/3/4/5 require an external rack mount configuration, but are still software RAID0 configuration, not better than JBOD RAID except that they take over striping without parity (which is almost impossible to recover from if a disk fails).

• Disk W530 Hard Drive Bay Adapter problem

  W530 ordered on 14/01/2014. I replaced the 500 GB with a SSD hard drive and wanted to use the reader HGST it came with a disc of Nimitz adapter. I can delete the partition and create a new volume, but it fails during format. It fails even when it is formatted a ready to use.

  I have a 250 GB drive at 5400 RPM Hitachi which works very well in the Bay. With the help of a USB drive Bay I can delete the volume and rebuild the drive of 500 GB. Why do I have a problem with this drive in the drive Bay?

  I plugged the hot formatted disk and it lights up immediately, I backup on it now. I don't know why I got so many problems earlier.

  Thanks for the reply.

• Hard drive size and the RAM with Labview 2009

  Hello

  I need to know please, how can I get the HDD of the hole size and the size of free hard drive using LabVIEW.

  Same for the RAM: size of free space and hole size.

  Kind regards

  Take a look at this example (and the thread):

  http://forums.NI.com/T5/LabVIEW/size-of-RAM/m-p/63942#M39616

• Incorrect hard drive size

  When I check MY computer, it says that I have 149 gb hard disk capacity.  However, the specs on my computer documents say that a 120 GB drive is installed.  What is the actual amount?

  Hi neuhouser,.
   
  -Have you installed external equipment (external hard drive or USB device) on your computer?
   
  If so, this space could have been included in the space of hard drive on the computer.
   
  Here is an article that could be useful for:
  How to locate and correct problems with disk space on NTFS volumes in Windows XP