InDesign CC closes unexpectedly after downgrade to ML Migration

Similar Questions

• InDesign CC closes unexpectedly when you create the new document

  Hi, my CC Indesign closes unexpectedly whenever I try to create a new document.

  Also, it closes when I use the plugin Blurb Indesign, to create the new document or for download from my books - during the pre-flight, she leaves.
  

  I've updated to CC2015. I also re-installed the plugin blurb. These two measures do not seem to work.

  • The InDesign file in the cache folder, delete.
  • In the preferences/Adobe InDesign / Version 11.0/en_US (or any language folder you see there), locate the InDesign Defaults file and place it on your desktop (this way you can always copy it back if necessary). If there is a file, InDesign SavedData offers also the office.
  • Restart InDesign after doing that, fingers crossed it will launch.
  • If you are satisfied with the result and don't need your InDesign preferences previous folder (InDesign Defaults), then delete the two files to the desktop computer. I usually keep a copy of them just in case ;-) But 99% of the time that I do not put them back, as clearing caches and prefs seems very often cure the problems.

• IPhoto opens but then closes unexpectedly after 10 seconds. What can I do?

  My iPhoto opens but then it unexpectedly closes after a few seconds, I can't upload photos. What can I do about it?

  What version of iPhoto? What version of the operating system?

  Is it iPhoto and 10.8 v9.2.3? If so:

  A lot of older versions of iPhoto 11 this meet right now:

  Huxly647 discovered this fix

  1 goto /Applications/iPhoto.app/Contents/Resources

  2 delete the files 'googlemap.html' and googlesearch.html

  IPhoto no longer crashes, site does not work, but it doesn't bother me too much.

  If it is not on this version, then back with more details.

• HP Solution Center closes unexpectedly after restarting

  When I install the software for my Officejet 7590 I can only use it until I restart. After a reboot, any attempt to access the HP Solution Center says that he has not completed the installation. And yet, I was able to use it before the reboot. I reinstalled 6 times of freshly downloaded. It's frustrating.

  Hi Knyght_Hawke,

  The Bing toolbar is not required for the Solution Center works correctly. Follow the steps below, and then when you reinstall the printer, you will want to do a custom installation, since you don't want to have a lot of programs installed on your computer.

  Try using the brush included in the CD or download.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-79356-2&CC=US&DLC=en&LC=en&os=4063&Product=3643612&sw_lang=

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-79356-2&CC=US&DLC=en&LC=en&os=4063&Product=3643612&sw_lang=

  10. run the download to reinstall the printer

• Dreamweaver CS5 closes unexpectedly after the installation of Yosemite but other programs of work

  After installation of OS X Yosemite 10.10.1 on my Macbook Pro, Dreamweaver CS5 will load halfway and then crash. Other programs seem to load very well and I don't know what to do.

  Model name: MacBook Pro

  Model ID: MacBookPro5, 4

  Processor name: Intel Core 2 Duo

  Processor speed: 2.53 GHz

  Number of processors: 1

  Total number of cores: 2

  L2 Cache: 3 MB

  Memory: 4 GB

  Bus speed: 1.07 GHz

  Boot ROM version: MBP53.00AC.B03

  Version of the SCM (System): 1.49f2

  The crash report said;

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BAD_ACCESS (SIGBUS)

  Exception codes: KERN_PROTECTION_FAILURE at 0x0000000000eade3e

  Any ideas on a fix?

  Thanks in advance!

  So were you able to find the correct Preferences folder that Nancy has pointed out and restore your preferences?

  From the Mavericks, unless you enable the files hidden, you will not see it: display hidden files and folders on Mac OS X Yosemite [how-to]

• Qualcomm Atheros AR9485 Wifi adapter closes unexpectedly after Windows updates

  We have a HP laptop, experiencing repeated problems with the AR9485 of Qualcomm Atheros 802.11b/g/n WIFI adpter following updated Windows.  Since we can not get online, we are unable to update the drivers.  Provides basic troubleshooting "Wifi adapter is experienceing driver or hardware related problems.  The device status shows "this device cannot start (Code 10) Operation Failed."  Any suggestions?

  Hello:

  Download this driver... Do not run it immediately.

  This package contains the driver installation package for LAN Qualcomm Atheros QCA9000 wireless controller series in models of laptop support and operating systems.

  File name: sp70859.exe

  Go to Device Manager and right click on the map the problem wireless.  Select uninstall.  Check driver uninstall, reboot and now the driver I posted and see if it works.

• "Adobe Illustrator CC close unexpectedly" after update 17.1 (MAC Mavericks)

  This morning, I used Illustrator very well. This afternoon I put to update to Illustrator CC 17.1

  Since my Illustrator opens and displays the menus and shows a window with new features for 17.1 - when I go to remove the Illustrator menu block. Can't do anything.

  I uninstalled and reinstalled - no solution

  called adobe, checked permissions, clear preferences - no solution

  created a new user account on my mac and IT WORKS on it.

  I have disabled all third-party fonts - no solution

  No fact that Verdana and Tahoma are allowed - no solution

  Recoomended Adobe I uninstalled ALL OF MY CC APPS. Are you kidding me? So much work for one effect that I'm not of course will help.

  ANYONE HAS A SOLUTION?

  Evan crash thread pointed to Wacom:

  Thread 0 crashed: Dispatch queue: com.apple.main - wire

  0 libsystem_pthread.dylib 0x00007fff8e1cf9a4 _pthread_mutex_check_init + 14

  1 libsystem_pthread.dylib 0x00007fff8e1cf621 _pthread_mutex_lock + 28

  2 com.apple.CoreFoundation 0x00007fff89238681 CFRunLoopStop + 49

  3 com.wacom.WacomMultiTouch 0x0000000108e944d1 CMacMultiTouchAPI::~CMacMultiTouchAPI() + 83

  4 com.wacom.WacomMultiTouch 0x0000000108eb3df1 WacomMTInitialize + 136

  UN-install the Wacom tablet, the issue has been resolved.

  @Evan: what is your version of the driver Wacom tablet, as well as the name of Tablet?

  Thank you best regards &,.

  Rambour Singh

• Why Windows Explorer keeps close unexpectedly?

  Shutsdown - close unexpectedly after short periods of time
  -You run several virus checks
  -Problem seems to appear after importing a large amount of images and video

  Hello

  Look in the Event Viewer to see if something is reported on these reboots.

  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Public library of clients is "ADE close unexpectedly" on Mac OS Yosemite 10.10.2 - versions ADE 4.0.1 - 4.0.3

  Hello

  I work in a public library - we now have at least three customers affected by the issue where ADE closes unexpectedly after you open a .acsm file and during the implementation phase.

  All three clients use Mac OS 10.10.2. A person uses 4.0.1 4.0.2 one person and only one person uses 4.0.3.

  They see the following information in the dialog system error:

  Exception type:
  
  Crashed thread: 0 dispatch queue: com.apple.main - wire
  
  Exception type: EXC_BAD_ACCESS (SIGSEGV)
  
  Exception codes: KERN_INVALID_ADDRESS at 0 x 0000000000000000

  Further down the thread they see:

  Logical CPU: 1

  Error code: 0 x 00000004

  Trap number: 14

  The ebook seller we advised that having customers roll back to ADE 3.0 version, and have re - authorize clients.

  Adobe has a solution for this problem that roll back?

  I tried to speak with an agent of conversation on this subject and was referred to this forum. A customer service poor experience overall even though the chat operators are polite and tried to help as much as they could.

  Thank you

  Holly

  Holly thank you for confirmation that he works for the validation of the update.

  I would ask you all, please install the latest version of the Adobe Digital Edition version at- download | Adobe Digital Editions and then check if it solves the problem for you and let us know in the case where you face all the questions.

  Kind regards

  Sharad

• After update of El Capitan, TextEdit closes unexpectedly before opening

  After update of El Capitan, TextEdit always closes unexpectedly before the opening, in a user account (which left more than 20 open TextEdit documents, before the update of El Capitan)...

  And in another user account, which has left no documents TextEdit open before the update of El Capitan, TextEdit open without any problems.

  What needs to be done, so TextEdit will open the first user account?

  Is there a way to reset the list of open documents TextEdit?

  Please quit the application. Force quit if necessary.

  He raises in holding down the SHIFT key and clicking on its icon. This action prevents the last State of the window to be recharged.

• The Adobe application manager maintains unexpectedly close immediately after that b being open when I try to download After Effects and repeat the process when the error message appears asking me to reopen.  Why isn't she let me download After Effects?

  The Adobe application manager maintains unexpectedly close immediately after b being open when I download tryto After Effects and repeating the process when the error message appears asking me to reopen.  Why isn't she let me download After Effects?

  Drogers1102 please use the uninstaller of creative application Cloud Desktop, then reinstall.  You can find more details at the request of error "Failed to install" Creative Cloud Desktop - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html.

• Loop Finder crash after upgrading to El Capitan.  'Finder close unexpectedly when you use the plug-in finder' - the message really is in Norwegian, so it may be different for the English operating system.

  'Finder close unexpectedly when you use the plug-in finder' - the message really is in Norwegian, so it may be different for the English.  The e is a compatibility issue with dropbox or Google drive in El Capitan?  Those are the plug-ins only that I could find.  Thank you very much.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• After you have reinstalled CS6, get error 'Photoshop close unexpectedly.

  Out of the blue, I tried to open a raw image of the bridge this morning and I received an error message that some components of the application were missing in Photoshop. A quick search on the internet told me that I had to reinstall CS6, so I did and went ahead and reinstalled the CS6 updates too. Now, when I try to open a raw image of the bridge file, I get a message different error that reads "Photoshop close unexpectedly. Click on reopen... "Note that I also get the error even if I try to open the CS6 without going through the bridge. I rebooted my machine and get the same error message. I am running OS X El Cap 10.11.4

  The problem has been resolved by updating my OS to the latest version of OS X. Thanks for the answers. Moderators please close this thread.

• Windows Live Movie Maker needs to close unexpectedly. error: 0xC9460025

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Sorry, Windows Live Movie Maker needs to close unexpectedly. Please restart Windows Live Movie Maker, and then try again (error: 0xC9460025).

  I get this when I open my saved file, I am changing. It allows to work properly since I installed Windows Live (about 2 months ago). 2 months ago, I bought my laptop. given that Win7 is not a Director as I have on my xp & vista I download this. Gee, this is a version darn downgrade. I've thought since win7 is new version I get a better version of WMM. But no! I'm used to movie maker xp and vista, light and easy to use, but are looking for more that's why I bought win7. Very disappointing! In any case I have not started to use itso until now no problems with my previous published videos. So today, I am in my final cut when WLMM stop working. It crashes and do not continue reading of the saved file. I tried to uninstall the windows live, but it will not be a badge. Cannot be deleted. I tried to fix it by reinstalling hoping it will work but still the same. I also tried to do system restore where I think it works well, but still does not work properly. A suggestion or a solution to fix this problem would be appreciated.

  Please reply as soon as POSSIBLE. I would like to know how to solve this problem or at least how to get rid of windows live. I'll just use another video montage.

  reply to this topic

  nessun101

   

   

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  The material should not be a problem, I usually run Movie Maker on my desk with similar specifications, but I also run it on a laptop of much lower quality. When Movie Maker freezes, just after the opening, after having tried to add a video file, after a specific action?

  If it crashes right after the opening, then it is possible that it is corrupt. You can uninstall, reboot, download a new copy and reinstall, which could take care of this.

  If it freezes after trying to add a video file so the video codecs might be damaged or missing. You can try to install a new audio/video codecs for any type of file you are working with. I heard good things about pack k - lite codec:

  http://www.codecguide.com/download_kl.htm

  You can also try watching the video filters activated in Movie Maker. Go to tools-> options-> tab compatibility. Then try checking and unchecking each filter, I had a problem with them at some point, but I don't remember which.

• Lightroom has begun to close unexpectedly

  I am currently in Lightroom on CC on an experimental basis. The program began to close unexpectedly while I work in it. I have all the system requirements, it publishes a message that Adobe Lightroom hass leave running. It makes me nervous to buy the program, if I have a problem...

  reset your preferences-

  Acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html

  Adobe media encoder: https://forums.adobe.com/thread/1713540

  Legacy: http://helpx.adobe.com/after-effects/using/preferences.html

  Bridge: https://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html

  Dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html

  Flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

  Illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html

  InDesign: https://forums.adobe.com/thread/526990

  Lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html

  Muse (mac): https://forums.adobe.com/thread/1246022?tstart=0

  Photoshop: https://forums.adobe.com/thread/375776

  Photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm

  elements of first: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html

  First pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html