HP Solution Center closes unexpectedly after restarting

Similar Questions

• HP Solution Center not working after reboot (scan fails also)

  My HP Photosmart 3310 software fails after a reboot, the day or the installation of the printer in Windows 7 64 bit.  No error - it is said that installation is not completed and to connect the USB cable (it worked only 1 hour ago), or the printer is offline.  I can reach the printer via IP (192.168.1.64 - static IP).  The other computers in the House are printing and scanning very well.

  Help I received via the software discussion and support forums is to re - install the software.  I did it more than 20 times - it does NOT work. Let me repeat if you have not received this the first time - software does NOT solve the problem.

  The scanner and the printer work fine after that the software is completely installed.  The problem is that the printer and the scanner work not the next day.

  Yes, I tried:

  1. check the latest system and windows updates.

  2. turned and on the firewall.

  3. pull on the printer and connect via a USB cable.  "" The installation is complete, but I can't run this way. The problem comes back the next day when I tried using the printer as a network through the router.

  4 when I "add" the printer to Windows printers list, it causes the software HP Solution Center to enter the "incomplete installation error.  Then, either the scanner or printer works, not both at the same time.  Other computers work fine.

  5. it's a brand new computer, if any old malware running.

  6. I uninstalled, reinstalled, installed multiple copies, etc. of the latest version of the software from this site (AIO_CDB_FSW_Full_Win_WW_130_141) printer.

  7. I ran the software patch network of HP, before and after the reboot, no real effect.  (CPE_SLP_NETWORKMSI_hpcom_000_006)

  Any help would be greatly appreciated.

  Rich

  I found a solution to the issue of scanner!  I installed the software VueScan from http://www.hamrick.com/ , the software is designed for high end photo editing, so it's a no-brainer for her to scan documents.  The free version works fine. If I wanted to the cost of the professional version of the $90 is nothing compared to the time I've wasted on getting the HP software to work.

  To resolve the problem of the printer, I installed the driver through windows and bypassed the HP software.  The only thing that miss me is now the ability to fax, but which can be performed directly from the HP Photosmart camera.

• InDesign CC closes unexpectedly after downgrade to ML Migration

  InDesign CC quits unexpectedly after downgrade to the Migration of ML.

  I reinstalled CC 5 x - tried timemachine backup - found and removed the weird files from another post and still no go.

  Now I can't update because of a U441p7 error and photo cant complete all tasks because of a program error.

  Help me I have a deadline for me, I have to get up and running the Mavericks killed my machine.

  I want to go back to where I was. HELP PLEASE!

  Uninstall all the programs of cc/apps.

  Run the cleaner, http://www.adobe.com/support/contact/cscleanertool.html

  Restart your computer

  Reinstall the programs of cc/apps.

• IPhoto opens but then closes unexpectedly after 10 seconds. What can I do?

  My iPhoto opens but then it unexpectedly closes after a few seconds, I can't upload photos. What can I do about it?

  What version of iPhoto? What version of the operating system?

  Is it iPhoto and 10.8 v9.2.3? If so:

  A lot of older versions of iPhoto 11 this meet right now:

  Huxly647 discovered this fix

  1 goto /Applications/iPhoto.app/Contents/Resources

  2 delete the files 'googlemap.html' and googlesearch.html

  IPhoto no longer crashes, site does not work, but it doesn't bother me too much.

  If it is not on this version, then back with more details.

• Dreamweaver CS5 closes unexpectedly after the installation of Yosemite but other programs of work

  After installation of OS X Yosemite 10.10.1 on my Macbook Pro, Dreamweaver CS5 will load halfway and then crash. Other programs seem to load very well and I don't know what to do.

  Model name: MacBook Pro

  Model ID: MacBookPro5, 4

  Processor name: Intel Core 2 Duo

  Processor speed: 2.53 GHz

  Number of processors: 1

  Total number of cores: 2

  L2 Cache: 3 MB

  Memory: 4 GB

  Bus speed: 1.07 GHz

  Boot ROM version: MBP53.00AC.B03

  Version of the SCM (System): 1.49f2

  The crash report said;

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BAD_ACCESS (SIGBUS)

  Exception codes: KERN_PROTECTION_FAILURE at 0x0000000000eade3e

  Any ideas on a fix?

  Thanks in advance!

  So were you able to find the correct Preferences folder that Nancy has pointed out and restore your preferences?

  From the Mavericks, unless you enable the files hidden, you will not see it: display hidden files and folders on Mac OS X Yosemite [how-to]

• "Adobe Illustrator CC close unexpectedly" after update 17.1 (MAC Mavericks)

  This morning, I used Illustrator very well. This afternoon I put to update to Illustrator CC 17.1

  Since my Illustrator opens and displays the menus and shows a window with new features for 17.1 - when I go to remove the Illustrator menu block. Can't do anything.

  I uninstalled and reinstalled - no solution

  called adobe, checked permissions, clear preferences - no solution

  created a new user account on my mac and IT WORKS on it.

  I have disabled all third-party fonts - no solution

  No fact that Verdana and Tahoma are allowed - no solution

  Recoomended Adobe I uninstalled ALL OF MY CC APPS. Are you kidding me? So much work for one effect that I'm not of course will help.

  ANYONE HAS A SOLUTION?

  Evan crash thread pointed to Wacom:

  Thread 0 crashed: Dispatch queue: com.apple.main - wire

  0 libsystem_pthread.dylib 0x00007fff8e1cf9a4 _pthread_mutex_check_init + 14

  1 libsystem_pthread.dylib 0x00007fff8e1cf621 _pthread_mutex_lock + 28

  2 com.apple.CoreFoundation 0x00007fff89238681 CFRunLoopStop + 49

  3 com.wacom.WacomMultiTouch 0x0000000108e944d1 CMacMultiTouchAPI::~CMacMultiTouchAPI() + 83

  4 com.wacom.WacomMultiTouch 0x0000000108eb3df1 WacomMTInitialize + 136

  UN-install the Wacom tablet, the issue has been resolved.

  @Evan: what is your version of the driver Wacom tablet, as well as the name of Tablet?

  Thank you best regards &,.

  Rambour Singh

• Qualcomm Atheros AR9485 Wifi adapter closes unexpectedly after Windows updates

  We have a HP laptop, experiencing repeated problems with the AR9485 of Qualcomm Atheros 802.11b/g/n WIFI adpter following updated Windows.  Since we can not get online, we are unable to update the drivers.  Provides basic troubleshooting "Wifi adapter is experienceing driver or hardware related problems.  The device status shows "this device cannot start (Code 10) Operation Failed."  Any suggestions?

  Hello:

  Download this driver... Do not run it immediately.

  This package contains the driver installation package for LAN Qualcomm Atheros QCA9000 wireless controller series in models of laptop support and operating systems.

  File name: sp70859.exe

  Go to Device Manager and right click on the map the problem wireless.  Select uninstall.  Check driver uninstall, reboot and now the driver I posted and see if it works.

• Why Windows Explorer keeps close unexpectedly?

  Shutsdown - close unexpectedly after short periods of time
  -You run several virus checks
  -Problem seems to appear after importing a large amount of images and video

  Hello

  Look in the Event Viewer to see if something is reported on these reboots.

  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Not report ink level HP solutions Center

  I had problems with the running at all HP Solution Center.  After you have reinstalled the full driver support and the software of my Photosmart c7280 on my HP Windows 7 x 64 system three times (the last time with the help of a live chat session) the Solution Center software runs and communicates with the printer, but is no longer can / will signal the ink levels.  It is used to do it regularly.  The initial problem with Solution Center appeared unexpectedly a few weeks ago.

  After reviewing the problem for several weeks, I finally found someone from HP to help me.  After doing a little troubleshooting, she decides to send me a CD with the HP Solution Center software.  I went through the installation and things as magically worked.  One interesting thing to note - side I did a little to compare bit of the file on the CD with the file that I had downloaded on the website of HP and they came out to be identical.  Explain this.

• Public library of clients is "ADE close unexpectedly" on Mac OS Yosemite 10.10.2 - versions ADE 4.0.1 - 4.0.3

  Hello

  I work in a public library - we now have at least three customers affected by the issue where ADE closes unexpectedly after you open a .acsm file and during the implementation phase.

  All three clients use Mac OS 10.10.2. A person uses 4.0.1 4.0.2 one person and only one person uses 4.0.3.

  They see the following information in the dialog system error:

  Exception type:
  
  Crashed thread: 0 dispatch queue: com.apple.main - wire
  
  Exception type: EXC_BAD_ACCESS (SIGSEGV)
  
  Exception codes: KERN_INVALID_ADDRESS at 0 x 0000000000000000

  Further down the thread they see:

  Logical CPU: 1

  Error code: 0 x 00000004

  Trap number: 14

  The ebook seller we advised that having customers roll back to ADE 3.0 version, and have re - authorize clients.

  Adobe has a solution for this problem that roll back?

  I tried to speak with an agent of conversation on this subject and was referred to this forum. A customer service poor experience overall even though the chat operators are polite and tried to help as much as they could.

  Thank you

  Holly

  Holly thank you for confirmation that he works for the validation of the update.

  I would ask you all, please install the latest version of the Adobe Digital Edition version at- download | Adobe Digital Editions and then check if it solves the problem for you and let us know in the case where you face all the questions.

  Kind regards

  Sharad

• Problem with Audio drivers after updating through the solution Center

  I left the Lenovo Solution Center perform an update on my system, and now I get two error each time Windows starts upward.

  FIRST ERROR: "command line of TOMY Application has stopped working".

  I give myself two arrows to click:

  "Check online for a solution and close the program" (does nothing)

  -"Close the program".

  "Display the details of the issue" reveals:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: SACmd64.exe
  Application version: 11.0.0.0
  Application timestamp: 4ee94e0a
  Fault Module name: SACmd64.exe
  Fault Module Version: 11.0.0.0
  Timestamp of Module error: 4ee94e0a
  Exception code: 40000015
  Exception offset: 0000000000150225
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: e357
  More information 2: e357a1a1b0010a7001c2e1562bb09767
  3 more information: 7d1f
  Additional information 4: 7d1fe5f93672c47a0d347598ff39d707

  SECOND MISTAKE: "Dolby Advanced Audio.

  The current version of the Dolby audio driver is 7.2.8000.13 and the software application expects that the version of the driver 7.2.7000.11. Please install a valid application of driver and software combination.

  The only option here is to click an OK button.

  These errors did not appear until I left the Lenovo Solution Center perform a software update.  I would have thought that the built in Lenovo program would update the correct drivers and software applications.

  Can what steps I take to solve these two error messages?

  Lenovo Thinkpad Edge E430

  TYPE 3254-CTO

  Windows 7 Home Premium 64-bit

  Core i7-3612-QM CPU @ 2.10 GHz

  Kit of memory 16GB DDR3 1600 MHz Corsair Vengeance SDRAM (CMSX16GX3M2A1600C10)

  I source and solved my problem.

  Follow the link:

  http://forums.Lenovo.com/T5/ThinkPad-edge-S-series/E430-Dolby-advanced-audio-issue/TD-p/826333

  I found that the instructions given by a member was more useful.

  First go to;

  Start > Control Panel > hardware and sound > Device Manager >

  Then go down to "sound, video and game controllers".

  Then 'right click' on the 'Conexant 20671 HD' and on the left, click on uninstall.

  Wait for the uninstall process to finish and then restart your computer.

  Wait a few minutes after the start to the top and Windows should automatically re - install the driver, that invites you to a message in the lower corner box right saying: "driver installed successfully', with the name of the driver below. (Mine was the same driver "20671 HD"

  Bingo, problem solved.

  If this does not work for you, there are other solutions and/or forum members/staff that can help.

  Hope this helps,

  Rexe

• Photosmart C6380 all-in-one: HP Solution Center does not work after update to the last version of Windows 10

  Printer worked flawlessly after upgrade to Windows 10. But with the last update, I can't scan more by HP Solution Center. I tried HP doctor and then remove and reinstall the software suite full, ensuring I have the latest drivers, but it still does not work. HP Solution Center is installed on my pc, I can even click on it and then it opens (briefly) and then closes, there is no way I can use the features. [However, doctor of HP, I could do an analysis of test and that worked, so there is nothing wrong with it.] Help...

  Hello

  Microsoft has since released a new update for this problem.

  Fix solution:

  Please download and install the following update KB3133431 from Microsoft:

  https://support.Microsoft.com/en-us/KB/3133431

  Note This update is available through Windows Update only. (Updates )  must be lit)

  1. Click the Start button, select 'Settings' and select 'Making day & security'
  2. Under "Windows Update", select "Advanced Options".
  3. Under "Choose how updates are installed," select "automatic (recommended) in the drop-down list in the menu drop-down."

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement

• HP Solution Center no longer works after update of HP Officejet J6480

  HP will provide an update to fix this problem?  If anyone has had the same problem (if so, how fixed?)?

  HP has pushed down the updates on a week earlier for my HP Pavilion Elite e9270f running Windows 7 64 bit home and domestic all-in-one Officejet J6480 which are connected wirelessly via my network.  HP Solution Center had worked for several years until then, but now can no longer connect to the J6480 with all the features.  Devices and printers in Control Panel displays the connection.  HP HPHNDU.exe utility displays the connection.  Print from works of MS Office products as ok HP Solution Center no longer works.  I can't scan documents to the PC (that it is pulled by the PC or pushed by the J6480).  I used http://support.hp.com/us-en/document/c02266743 instructions and the software of HP Officejet and Driver Removal Utility OJJ6400_Scrubber_13.exe to remove all aspects of the printer and the software.  Then reinstall them using (with HP printer install wizard HPPIW.exe), but the new installation also fails linking the center of solutions HP (printing still MS Office programs).  According to me, it is a plague of HP inflicted that should have a solution from HP.  FG 120201

  Hi MFredV & 2015,

  Sorry to hear you've had the problem with the printer after you run the update. Please follow the steps below and let me know if you continue to have problems?

  Try using the brush included in the CD or download.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-79309-1&CC=US&DLC=en&LC=en&os=4063&Product=3635378&sw_lang=

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-79309-1&CC=US&DLC=en&LC=en&os=4063&Product=3635378&sw_lang=

  10. run the download to reinstall the printer

• HP C7280 solutions Center will not work after the upgrade to Windows 7

  I was running Vista and connected the C7280 wired and wireless. The last month or so has been wireless without any problem.

  I've upgraded to Windows 7, reinstalled the driver I had, and now when I try to scan I get an error that says: "an unsupported operation was attempted" which appears twice, then I get an error that says "an invalid argument has been detected.

  A window pop up gives then a few measures to try to resolve the problem.

  I downloaded and installed the driver PS_AIO_02_Net_Full_Win_WW_130_140.exe which did not work.

  I deleted the printer of the material then uninstalled the Software Solution Center

  Driver package driver re-installed PS_AIO_02_Net_Full_Win_WW_130_140.exe C7200 and

  dot4patch_reboot.exe installed,

  Stop the printer, it unplugged for a few minutes, restarted the computer, and

  the same errors.

  The driver is a year old, and I can't find a newer version.

  Exit the:		2009-10-20
  Version:		13.1.0

  The patch is the latest of a few months, but it did not help either. " Print Patch HP software when upgrading from Vista to Windows 7

  2009-12-06, version 1.0, 1.22 M

  This Windows 7 fix corrects some of the features of the printer after upgrading Vista to Windows 7. For networked printers, go to www.hp.com for more support information.

  Any help is appreciated.

  Finally, you have this problem fixed. With the support of HP no.

  I installed the software for a HP Photosmart Premium C410 series and it fixes some problems I had with the HP Solution Center, analyses the problems in the C7280 printing software.

  Go figure...

• HP Solution Center does not work after installing Windows 10.

  After 10 Windows Installer, Solution Center HP, which is part of the installation of software for my HP Officejet 4500 510nz, tells me that the software is incomplete. The installation disc does not open, so I downloaded the HP program and re-installed. I always get the message that the software is incomplete. HP says they no longer support this printer (bought 24/05/14 - May 25/09/13!) - WOW! ~ printer still print, but will not run the other functions such as scanning, etc., because the HP Solution Center does not start, and HP has abandoned in favor of their product.

  Now what? Should I buy a new printer to replace this year 1 old HP so I can use its features with W10?

  Or, is there a way to fix it?

  This thread has been locked, for more information on HPPIW, please refer to the following support document:

  http://support.HP.com/us-en/document/c02681060

  HP printer Installation Wizard is an application of HP support that helped to download printer software. This support request is no longer supported by HP. This software was last updated was September 22, 2015.

  To download and install the latest version of the software for your HP printer, please visit 123.hp.comor HP support Web site, HP Support Assistant (in English).