InDesign matter IDML and converts return soft-statements

Similar Questions

• I had to do a system restore on my PC, which reformats the hard drive and he returned to factory State, and I lost all of my emails from OE and contacts. No way to get them back?

  My computer crashed and the system recovery was the only option.  I know this reformats the hard drive and actually returned the PC to factory State, but I cannot now access all of my old emails and contacts on OE.  I managed to configure OE once again, so I can receive messages via my site, but really need to come back to the 'old'.  Any help would be greatly appreciated

  My computer crashed and the system recovery was the only option.  I know this reformats the hard drive and actually returned the PC to factory State, but I cannot now access all of my old emails and contacts on OE.  I managed to configure OE once again, so I can receive messages via my site, but really need to come back to the 'old'.  Any help would be greatly appreciated

  Two points:

  Suggestions 1. see Bruce Hagen, but it is highly unlikely that you can get everything back. When you perform a system recovery, you lose everything that was on the disc.

  2. it is late to tell you this, but like you apparenly had no backup on external media, you're playing with fire. For the future, you can read this article I wrote: "how to return your computer regularly upward and reliable" to http://www.computorcompanion.com/LPMArticle.asp?ID=314

• FrameMaker 2012 or 2015 tab and returns Soft displayed as numbers

  In Framemaker 2012 or 2015, how will we change the tab and returns soft characters is displayed as numbers?

  Thank you
  Rich

  You see these numbers when you have the view > text option enabled symbols, but otherwise the required action (tab or soft return forced) happens?

  If so, then it could be that the fm5font.ttf in your \fminint file is missing or damaged.

• How to convert an Indesign document and convert a continuous flow word document

  How to convert an Indesign document and convert a continuous flow word document?

  Thank you so much worked perfectly.

• search string and convert whole real or 8-bit 32 bit

  I was hoping to get some advice on how I could search for the following string and convert it to a real number or an integer.  The following data is output as a device ascii characters and I would look for both in each line (starting with 7699,72 seconds in this case) and convert each one to a real number.  Furthermore, I would like to get the integer values in each row (0, but could be 1,2,10,12, etc.) and convert them to an 8-bit integer.  I think that using the template Match followed by analysis of chain would screw that I need, but am not sure how to match in each case. Thank you!!

  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

  7699,72 0

  7699,74 0

  7699,76 0

  7699,78 0

  What are the characters in the white space between the and the numbers?

  Scan chain can probably not what you want.  Note that in the image space characters include spaces, return carriage, line breaks and tabs.

  Lynn

  

• I created a document in Photoshop CC with URLS and hyperlinks.  I want to take this document and convert it to PDF AND I wan't these URLS and hyperlinks to be clickable.  How do I do that?

  I created a document in Photoshop CC with URLS and hyperlinks.  I want to take this document and convert it to PDF AND I wan't these URLS and hyperlinks to be clickable.  How do I do that?

  It works very well.  Use the screening of high printing quality, but think about what resolution for your graphics card.  In fact if you have higher res images online versions, you can hot link to them from the PDF file.  I used to publish a magazine of the club until a couple of years, and while I've used InDesign, output to PDF format was exactly the same process

  http://www.marlboroughcameraclub.org.nz/photo-news/Arti/photo-news-2013/

  If you want to go one step further, take a look at this example, which uses the SWF to the page turn effect

  http://www.f11magazine.com/current.html

  I assume that your document is a good single page?  Photoshop is a clumsy tool for multi-page documents.

• You can save a. CPTX (project) as one. CPTL (model) and convert later than for one. File CPTX? I just need a little clarification on this operation in Adobe Captivate 8.

  You can save a. CPTX (project) as one. CPTL (model) and convert later than for one. File CPTX? I just need a little clarification on this operation in Adobe Captivate 8. Thanks in advance!

  Sorry, but I neglected to include a bit small (but essential) information on this thing cptl.

  A file cptl is a model of Captivate. When you create one and create a new project based on a template, you point to the .cptl file. And at this time, no matter what the .cptl file has inside of it at this time is copied to a new project file. From there, you simply save the project and .cptx is assumed. The CPTL will already have the draft resolution together and many other things. The beauty is that once it is all set up correctly, it allows you to create faster training because you don't have to stop and consider things like the resolution of project, which should show the first slide, which should show the last slide, but also a host of other possibilities.

  The reactive substance, you need to ask one of the new kids on the block who is struck with it. I'm old school and have yet to fully embrace it. It's new and full of contradictions. And I really struggled with how many people ask to see training which normally runs on a large monitor displayed on their tiny phone screens where text messages are often barely legible.

  See you soon... Rick

• Numbered update cross-references blocks InDesign CS4 CS6 and

  I have a major medical journal that has a hundred references, I met with the thought that the customer can insert or change the references. I was correct and the client has now several references to go, I have updated the first in the list numbered at the end and disappeared to "update the cross-refernce" and InDesign crashes. I tried this in CS6 and CS4 but both crash.

  You could try exporting as IDML and opening the IDML and saving it under a new name.

  HTH

  Kind regards

  Peter

  _______________________

  Peter gold

  Know-how ProServices

  mccoole1 wrote:

  My Indesign has the latest updates and patches (mac of my colleague - in which the error report came from - does not work). A bit annoying that Windows is not the error report, or if it doesn't it is not after that InDesign broke down.

• Return Soft affecting running headings

  Hello!

  I have a running header that uses my style of my chapter name in my book. In the chapter on the page name, I used a soft return. Now my head running shows that half of the name chapter because I used a sweet return to the title of the page.

  Is there a work around that?

  Thank you!

  Do not break the variables through the lines, and they pick up exactly the text that carries any model is selected, so if you use a gentle back and specify a paragraph style your header text will dare everything beyond the line break (because it cannot wrap the varialbe). You can use two paragraph styles (which differ only by their names, if you wish) and a return with two variables of paragraph style and a space between, or you can use two character styles applied to different lines in a single paragraph with the forced break and two character based on running style with a space between.

  Character styles, if you use this method, should have none of the other that a unique name attribute so that they do not change the formatting. You can apply character styles as styles nested in the paragraph style (a good way to do because her disappear completely when you assign a new paragraph style to the variable text itself, or a table of contents list that uses the paragraph style). The method of character as part of a forced line break style can facilitate you life when it's time to build the table of contents as Chapter heads will use the paragraph only one style alone. However, you will need to use find/replace on the table of contents to replace the spaces forced line breaks.

  To use the nested style approach, you set the formatting that has been done on basis of the paragraph style, then in the section nested styles appy style character 1 to 1 line forced break, no thanks to 1 character and character style 2 through 1 sentence.

• LOV query is not valid, a display and a return value is necessary, column n

  Hello
  
  I AM FACING
  

  LOV query is invalid, a display and a return value are needed, the column names need to be different. If your query contains an in-line query, 
  the first FROM clause in the SQL statement must not belong to the in-line query.

  with two table, I create lov
  
  the tables are
  

  CREATE TABLE  "CRM_SALES_DEPARTMENT" 
     (     "DEPT_ID" NUMBER NOT NULL ENABLE, 
       "CUSTOMER_ID" NUMBER NOT NULL ENABLE, 
       "DEPT_CODE" VARCHAR2(50) NOT NULL ENABLE, 
        CONSTRAINT "CRM_SALES_DEPARTMENT_PK" PRIMARY KEY ("DEPT_ID") ENABLE
     )

  CREATE TABLE  "CRM_SALES_CUSTOMERS" 
     (     "ID" NUMBER, 
       "CUSTOMER_NAME" VARCHAR2(255), 
       "CUSTOMER_ADDRESS1" VARCHAR2(255), 
        PRIMARY KEY ("ID") ENABLE
     )

  I USE QUARY
  

  select (SELECT CS.CUSTOMER_NAME FROM CRM_SALES_CUSTOMERS CS WHERE CS.ID=SD.CUSTOMER_ID) AD D, SD.CUSTOMER_ID R  
  from CRM_SALES_DEPARTMENT SD where SD.DEPT_CODE=:P16_MARKET 

  But who show me LOV query is not valid, a display and a return value is needed, the column names must be
  different. If your query contains a query online, the first CLAUSE in the SQL statement must not belong to the query online.
  
  How to solve this problem.
  
  Thank you
  
  Published by: 805629 on January 10, 2011 03:46
  
  Published by: 805629 on January 10, 2011 03:58
  
  Published by: 805629 on January 10, 2011 03:59

  ¿AD?
  Select (SELECTION of CS. CLIENT_NAME CS CRM_SALES_CUSTOMERS WHERE CS.ID = SD. CUSTOMER_ID) AD D, SD. CUSTOMER_ID R
  CRM_SALES_DEPARTMENT SD where SD DEPT_CODE =: P16_MARKET

  But the correct way is a join outher

  select CS.CUSTOMER_NAME D, SD.CUSTOMER_ID R
  from CRM_SALES_CUSTOMERS CS,
          CRM_SALES_DEPARTMENT SD
  where SD.DEPT_CODE=:P16_MARKET
  And CS.ID(+)=SD.CUSTOMER_ID
  

• After downloading the update for Yosemite 10.10.5, I got an annoying popup with a beep sound blaring that says that Safari crashed. I've forced to leave Safari, rebooted and popup returned once more. Restarted again and popup went. What was it?

  After downloading the update for Yosemite 10.10.5, I got an annoying popup with a beep sound blaring that says that Safari crashed. I've forced to leave Safari, rebooted and popup returned once more. Restarted again and popup went. What was it?

  Open Safari while holding the SHIFT key

  Try to reset the settings of Safari:

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select the Preferences/Privacy tab

  4. click on remove all data from the Web site

  5. close Safari.

  Remove cache Safari files:

  1. click on finder

  2. look for the menu GO to top

  3. click on GO and hold down the option key. This will show a user library folder.

  4. click library and find the Caches folder

  5. in the folder caches com.apple.Safari Ouvrezledossier

  6. move the Cache.db file Trash.

  This should solve the problem. If it does not help, try to disable the Safari extensions

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select Preferences

  4. find the Extensions tab

  5 disable all extensions of

  6. relaunch Safari

• Pages supported by default and converted my word into pages documents. Ugh! now, half are corrupt and will not open. How do I reverse this order?

  Pages has taken over and converted all my Word documents. now, half are corrupt and a mess... How can I make Word my default and how to edit pages documents to Word.

  Pages is not a clone of Word, and you never work in the native Word document format.

  When you open a Word document in Pages, he translated the Word content in document format internal .pages Pages like the active working copy. When you save this content, it is recorded as a Pages document and cannot replace the original content of the word.

  This is when you export this document internal Pages content to the word he has once again reflected in the document format Pages internal to its best estimate in the new Word document format, Pages editing session and uses the same name of the document as the original Word document. Just nothing where you bitten, because Apple gives no assurance that the process of translation will be accurate, and you effectively overwriting your original, rather than generating a different export document name to preserve the original.

  If you want to always open/edit/save in the native format of Word document, then use Word in Office for Mac. It is the only app that offers native Word document changes.

• in my iphone all nine 6s photos are coming in img instead of jpg.  help to open and convert.

  Please help me open and convert img photos received in jpg format.  In addition, video came in a text to MOV and was perfectly fine on the phone to shippers. "Would not send" on mine.

  How files are received, it is up to what type of file the sender offers you, not to your receiving device. This would apply to both photos and videos. An img file, perhaps only the name of the file itself, which is part of the phone to file naming convention. Image and video converters can be found online. There are many of them.

• Compressor can import markers .wav or .txt cue lists and convert them to chapter markers?

  A simple...

  Compressor can import markers .wav or .txt cue lists and convert them to chapter markers?

  Best

  T

  See this support document and go where it says "Add markers using a list of chapter markers":

  Compressor 4: Add markers

  https://support.Apple.com/kb/PH21224

• HP: copy software TurboTax and tax return on a cd at the same time

  How to copy software TurboTax and tax return on a cd at the same time so I can then remove turbo tax notebook

  cole310

  Hello;
  
  Let me welcome you on the HP forums!
  
  If your intention in the copy of the turbotac 'software' on a CD so that you can later reuse - forget it.  The software consists of LOTS of files installed in several different folders.  Basically, there is no way you could find all the components, copy them to a CD and then later restore all these elements in the files correct reuse software.

  If you want to reuse, and then keep the original CD it came on or if you downloaded it instead, keep the file, you have downloaded - and then reinstall it.

  Good luck