InDesign - problems with the doc of work

Similar Questions

• Problems with the functionality of work plan...

  I have trouble getting the right size of the image when I export my work. After that I put my the artboard size, I export the image in Dreamweaver. When the image in dreamweaver, the "cropped" portions of the image are still there. Basically, the height and width of the image, I work with Illustrator is on 3 "x 4", but I only want displayed to 2 in. x 3 and didn't seem to do it with the tool of work plan.

  If you use save for web, make sure that "clip for work plan" is checked under the tab size of the image.

• I have a problem with the LifeCam 3000 works is not on Windows 8.

  Original title: ask the community

  When I installed Windows 8, my LifeCam HD3000 has stopped working, I deleted all the old drivers, disconnected etc and then reinstalled the last 4.25 driver version, but I have no longer a desktop icon, or the ability to start the camera. Please inform me of what to do now.  I need the camera for Skype etc with family abroad.   Any ideas?

  KRAL

  Hi Ken,

  1. have you checked if the webcam works in the photo app?

  2 are. what buttons you referring? Are you referring to the Skype app?

  I suggest you try to use a different port or check the webcam on another computer. That would help us determine if there is a problem with hardware.

  I suggest also refer to the link and try to use the webcam via photo app and let us know the results:

  App photo and webcams: FAQ

  http://Windows.Microsoft.com/en-in/Windows-8/camera-app-FAQ

  It will be useful.

  Hi Rohit,

  I was talking about the button on the windows 'Start' screen 8, not having even the LifeCam button performed on the installation of the programme of work.

  However, I this afternoon, completely erased the files on the computer and remove the button from the start screen.  Then I re-installed the earlier version of LifeCam how (for the first time), I was advised to wait for the last update to install after I plugged the device into an outlet of the USB2 and 'Bingo' the camera works now.  It even works on the button that has been postponed on the start screen.  I'm not too sure what I did, but the camera works using the LifeCam button, but not the camera to Windows or video button, but that's no problem.  Thank you for your interest and your help.

• I have some problems with the Flash cs6 work

  I have a problem with my game when I created it using adobe flash cs6

  When the duck strikes the screen, from right to left as it shows

  TypeError: Error #1009: cannot access a property or method of a null object reference.

  Duck / ducksmove)

  at flash.utils::Timer/_timerDispatch()

  at flash.utils::Timer/tick()

  This is the code so please help check that does not

  package {}

  import flash.display.MovieClip;

  import flash.utils.Timer;

  import flash.events.TimerEvent;

  import flash.events.MouseEvent;

  Duck/public class extends MovieClip {}

  var moveDuck:Timer = new Timer (10);

  var speedX:Number;

  public void Duck() {}

  this.addEventListener (MouseEvent.CLICK, KillDuck);

  moveDuck.addEventListener (TimerEvent.TIMER, ducksmove);

  moveDuck.start ();

  speedX = 10;

  }

  function ducksmove(evt:TimerEvent):void

  {

  This.x = speedX;

  If (this.x < = 0)

  {

  moveDuck.stop ();

  moveDuck.removeEventListener (TimerEvent.TIMER, ducksmove);

  this.parent.removeChild (this);

  }

  }

  function KillDuck(evt:MouseEvent):void

  {

  var p:MovieClip = this.parent as MovieClip;

  p.setScore ();

  p.UpdateCount ();

  this.removeEventListener (MouseEvent.CLICK, KillDuck);

  this.parent.removeChild (this);

  moveDuck.addEventListener (TimerEvent.TIMER, ducksmove);

  }

  }

  }

  You seem to be trying to delete the same object twice, in the KillDuck function, then in the ducksmove function.  If it is removed already you can not try to remove it again because it is no longer in the display list.

• I have a problem with the Windows Firewall work is not on the computer.

  Original title: windows firewall does not work?

  Have a laptop (Dell Inspiron) it has a virus on it (the fbi one) and then after I got rid of him, found others. Trouble with turning on the firewall, this time no error just sits and circles around. Uninstalled anti-virus programs, then installed a new run malware and tried a few things online. Tried to copy the registry from a windows 7 to another, no change (bfi or something like that).

  Tried to repair and that has not worked yet.

  Is there anything like that, I can extract, or a .dll file that could fail to clear up this problem. Downloaded avast and computer seems to work quite well. I would like to fix without having to reinstall everything.

  Thanks, Bruce

  It can now work. I launch tdsskiller and what he said, restarted.

  I have green shields now, even if I'm running emisoft emergency kit and which shows a Trojan horse, a rootkit and a gen.varient as other programs didn't pick up before, I ran malware and 2 other anti-virus programs before tdsskiller. Even tried rkill.

  Thanks, Bruce

• I have a problem with the print screen works is not on Windows 7.

  Original title: PrtScrn doe not work, you need to know the correct procedure

  System = Dell Inspiron 1545-3055 PC, Windows 7, printer is HP3520

  The problem has been reso; VGT in Windows 8 need to know this before Win8.

  Thanks for your quick reply, your help is always appreciated.

  Don Sowarby

  It is not considered a bug - it's just a misnamed former feature of computing which lasted. Therefore, it is not "fixed" in Windows 8.

• I have a problem with the capture tool works not properly on Windows 8.

  Can I change to automatically let me start to select without clicking on New?

  Original title: snipping tool - work when I start it up, the new button has already been clicked but not at home

  Clarification:

  At work, my computer is Windows 7. At home, it is Windows 8. At work when I start the capture tool I have not hit any other button in order to start the selection of the area I want to Snip. The tool is already gray and my mouse is ready to score my selection.

  At home when I start the capture tool, I get the menu, click on 'New' and THEN I can start my selection - one additional click. It annoys me (I know it's small, but I cut a lot) so I was hoping there was a setting I could change how it starts.

  I know that's not exactly a new topic, but I found that I had the same problem.  I found that the cause of this problem actually comes from OneNote believe it or not.  If you have recently updated your Office Suite and now have the ability of OneNote, all you have to do is to open OneNote and configure.  Once you get it configured you can then select the options that you just press the Windows key + S to be able to cut out a screen shot and you can also set it to copy directly to the Clipboard, then there is no need to tap the new button more in the cutting tool.  Hope this makes sense and helps anyone having the same problems I had.

• Problems with the edition of work plans

  I did not have a good experience. I can't even change my plans of work, they get stuck off the coast to the right or left and I can't scroll right or left to get them to a place where I can zoom in on the map of the art of making changes. The screen of UI zooms only the Board of the art that is visible on the screen at the same time. Also when adding graphics to images or work plans I can't select them at all.

  You should be able to use two fingers on the touchpad to the panorama of the view in XD, similar to how you would scroll/pan in other applications on your Mac.  Please let us know if this doesn't work for you.

• problem with the custom download works only with IE 8

  All,

  Ive created a button to download custom content of the interactive report using the url of normal reference below but it doesn't work in IE8 which is the solution to this? also, it gives no error when you click on the button that the download popup (save/open) crashes.

  my settings should be correct under button url value f? p = & APP_ID.: & APP_PAGE_ID.: & SESSION. : CSV:

  This works fine in firefox and chrome, but not in Internet Explorer.

  Apex 4.1.1

  Try to use a branch of the page which is subordinate to that special touch. Send the page by using the key and the definition of the request for connection to the CSV format.

  Denes Kubicek

  -------------------------------------------------------------------

  -------------------------------------------------------------------

• I have a problem with the Microsoft Programs work is not on the computer.

  Original title: programs MS 'arrested '.

  I was cold called by a company, (Smart snake) who told me that my pc has returned error reports and they can fix it, but they have to take control of my PC to do.  They forced me to put in "config" at the C prompt to show me how many MS programs have been arrested.  Anyone know if it is likley to be authentic and if so, what is the best course of action to make about the programs of the MS order

  Its all in the name; Snake - powder of snake oil

• Problem with catalyst 12.8 working set memory?

  I run a system Win7 Ultimate x 64 with dual ATI HD5870s inside. After update Catalyst 12.8 today, I noticed a problem with the memory what work has been used by Firefox 14.0.1.

  IS REPRO STEPS
  (1) run Firefox
  (2) open Taskman, sort of working set
  3) http://www.kotaku.com
  (4) use mousewheel to scroll the pane to the right down - load the additional articles for review.

  If you scroll down a bit, you should see Firefox eat a few GB of working set memory in short order. The page starts answers incorrectly at the time and Firefox becomes unstable.

  Note: This problem only repros when Crossfire is enabled. Crossfire is off, there is no problem at all.

  I don't know if it's a v Crossfire Firefox thing, or something new, sent by 12.8 catalyst... but whatever it is, keep your eyes open. I don't have a way to solve this problem yet apart from the stop of Crossfire, which denies the reason why I went with a double solution map in the first place.

  Deactivation of Firefox > Options > advanced > General > browsing > use hardware acceleration when available solves the problem until Mozilla and AMD solve this problem

• I work in InDesign CS5 and have a problem with the panels on the right. Some of them are empty. Ideas?

  I work in InDesign CS5 and have a problem with the panels on the right. the panels color chart, paragraph styles, and totally blank menus link. I pulled upward from publications that I already worked on and they are still virgins. I tried to load styles from other pubs, ID, and that does not work either. I can see them when I go to create a new style and use BASED on function.

  Any ideas?

  Try to restore your InDesign preferences. Here's how:

  FAQ: How to reset or 'trash' preferences?

• problems with the script in indesign

  Hi all

  I'm new and scripts so I hope I can explain what I need

  Well, I have an indesign file in which I need to insert an extra layer with the translation of a language, have a layer IN English and an extra a FR for the french.

  I found a script that's like that

  with (app.clipboardPreferences) {}

  pasteRemembersLayers = true;

  }

  var docTarget = app.documents.itemByName ('French.indd');

  var docSource = app.documents.itemByName ('French.indd');

  If (docSource.isValid & & docTarget.isValid) {}

  var numSpreads = docSource.spreads.length;

  for (var i = 0; i < numSpreads; i ++) {}

  app.activeDocument = docSource;

  app.activeWindow.activeSpread = app.activeDocument.spreads [i];

  App.Select (App.activeDocument.spreads [i] .allPageItems);

  If (app.selection.length > 0) {}

  app. Copy ();

  app.activeDocument = docTarget;

  If (app.activeDocument.spreads [i] .isValid) {}

  app.activeWindow.activeSpread = app.activeDocument.spreads [i];

  app.pasteInPlace ();

  }

  }

  }

  }

  but it seems to cause problems with the files,

  I have to say that the source is a file very heavy, even enter takes a long time.

  but I want to just get into the text layer,

  Do you think this script works finally, can you spot an error or something?

  Hello

  Your script is copying content of any doc (allPageItems) in an another doc - all number two need to have equal variances.

  You don't need to run the script if your goal is to create the new layer in the existing doc.

  The questions are

  What elements of the page must be copied into this layer

  AND

  should bound texts copied frames play any content

  AND

  wherever the content come from?

  Jarek

• Problem with the trial of InDesign for Mac

  Hello! I have problems with the InDesign trial download to my Macbook pro. This works on my macbook air to friends, but now on my computer. What can I do?

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• Hello! Someone has some problem with the haptic on Macbook 12 "2016 function? It does not work on my Mackbook.

  I'm trying to figure if someone has my problem with the haptic on Macbook 12 "2016 function. The option is checked in the preferences system, but it does not work.

  Thank you

  Hello luigi10m,

  Thanks for posting on the Community Support from Apple. From your post, it looks like your haptic feedback does not work when you click using your trackpad and the setting is enabled. I know that this is a great feature and it is important to make it work. I'll be happy to help you.

  First of all, I would like to assure you that in system preferences > Trackpad > clicking silencer is not checked, that might help. In addition, it would be useful to reset the settings of the SCM. You can find instructions here: reset the management system (SCM) controller on your Mac - Apple Support

  I'll also include those for you here:

  1. Stop the Mac.
  2. Plug the MagSafe or USB - C adapter to a power source and to your Mac.
  3. Use the built-in keyboard, press shift-control-Option on the left side of the keyboard, then press the power button at the same time.
  4. All the keys to unlock, then press the power button to turn on your Mac

  Take care!