Information overlay not no projection in the print Module

Similar Questions

• List of keywords/keywords tabs not no projection in the library Module

  The keywording & keyword list tabs are not appearing in my library on the right side module. In addition, I can't use the shortcut of Mac "Command + K" to add a keyword. Have tried on the photos that are both from my iphone (TIFF) as well as raw of my Nikon (NEF).

  New to lightroom and have no idea what's going on. Just noticed today after having worked in the program for about a week now do things with lynda.com tutorials basic and others

  Thank you!

  Right click on one of the other Panel headers and check those you want.

• We get an error "NETWORK CONNECTION ERROR, make sure a firewall is not blocking access to the printer.

  * Original title: printer error...

  I was printing with a printer wireless for months and now all of a sudden I'm getting an error, NETWORK CONNECTION ERROR and then readings make sure that a firewall is not blocking access to the printer.   I checked and it is not blocked...  I did a session of disorder and it reads no problems found.   Can someone please...

  Hello

  1. what version of Windows is installed on the computer?

  2. What is the brand and model of the printer?

  3. you have any non-Microsoft firewall installed on the computer?

  4. what security software is installed on the computer?

  5 have have there been recent changes made on the computer before the show?

  Please follow the steps below and check if that helps.

  Method 1: Run troubleshooting network printer and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Method 2: Select the file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-file-and-printer-sharing

  Method 3: I suggest to change firewall security settings, or disable the security software on the system and try to access the printer.

  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.

  For more information, see the articles and check out them.

  Understanding Windows Firewall settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/Understanding-Windows-Firewall-settings

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Allow a program to communicate through Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/allow-a-program-to-communicate-through-Windows-Firewall

  Let us know if it helps!

• My Lr5.7.1 does not recognize my printer Epson XP-760 and after customize printing in the print Module, printing options (lower right AND Main Menu > Archive > print) are disabled

  I am running Lr5.7.1 on an iMac, retina 5K (OS X Yosemite 10.10.1).) My printer (Epson XP-760) works fine with all other applications, but not with Lr! After choosing my printing preferences in the print Module, it works if I select print file and save it to the desktop and then return to preview and print from there. This is not what I want. I expect that the print button (bottom-right) should be disabled and not disabled and send to the printer directly from in the Lr print Module. It doesn't matter if the printer is turned on Wi - Fi or USB (or even both).

  What is the problem? What else can you or should I do to make it work as I hope?

  Gunnar

  My Swedish is not good, but I think that you print on file. Did you try chaning where it says JPEG it changed printer?

  You might also on 5.7. On Lr if you go to the Help\System of information, what is the version number? If she is 5.7, you're not on 5.7.1. Yo can still update manually, go to Adobe - Lightroom: for Macintosh: Adobe Photoshop Lightroom 5.7.1, download the dmg and install.

• InDesign CC packages is more fonts when I need to send a project to the printer

  Hey Adobe team: user for a long time when Photoshop was but a germination. I recently upgraded the Creative Suite 6 to creative cloud and have encountered a worrying problem. InDesign CC packages is more the fonts when I need to send a project to the printer. This meant that I had to completely redo a project on the deadline for a problem I've ever had before. How is - it may help your users? And is there a current solution or should I cancel creative cloud and return to the CS6?

  @OurPlace

  First of all, you do not discuss any team of Adobe. These forums are primarily supported by volunteers who are not Adobe employees and do not represent official Adobe Support.

  That being said...

  He there did nothing specifically with InDesign 9 or 10 (CC and CC 2014) version of InDesign to modify or disable the packaging of fonts when packing for a document. There should be absolutely no different from InDesign (version CS6) 8.

  Troubleshooting tips:

  (1) make sure that you enable the option Copy fonts (except CJK and TypeKit) in the package dialog box.

  (2) make sure that you are not using any ideogram (Chinese, Japanese, and Korean) fonts complexes that specifically never put us in a package.

  (3) fonts TypeKit will not be packaging.

  (4) make sure that your file system permissions are such that InDesign can create all necessary directories and all subdirectories to the packaging operation.

  (5) if the MacOS, exit InDesign and try to force a clearing of your system font cache and restart.

  (6) output InDesign and then find and delete all the files on your system with names of the form .lst AdobeFnt# # being a two-digit number; delete not all the other files that begin with AdobeFnt. Restart, and restart InDesign.

  (7) reset the InDesign preferences that can has been corrupted. For Windows, start InDesign and press Shift + Ctrl + Alt. Click Yes when asked if you want to delete preference files. For MacOS, pressing down on Shift + Option + command-control, start InDesign. Click Yes when asked if you want to delete preference files.

  One of them should nuer or solve your problem. Once again, we at Adobe are not aware of any generic problem with packaging fonts with InDesign.

  -Dov

• Operation could not be performed. The print spooler service is not running

  I get the error message "operation could not be performed. The print spooler service is not running. "How to start the service on Windows xp print spooler?

  Click Start--->run---> Type ' services.msc"--->OK and scroll down to print spooler entry and right-click, select Properties, set Startup type and in"service status", click the button to start the service."

  Good luck.

• Error message-""could not be achieved. " "The print spooler service is not running.

  Can anyone help. Whenever I try to print, I get a message that I need to add a printer, even if I have a printer installed. When I click Yes I Mindprint an another error box saying 'operation could not be performed. The print spooler service is not running"could someone advise how to solve this.

  Thanks in advance

  Matt

  Hello

  ·        Have you tried the steps that are listed in the article manually and see if the problem is resolved?

  ·        Who is the manufacturer of the printer and what is the model?

  ·        When did you get the error message when you try to install the printer or when you try to print?

  I suggest you follow the steps mentioned below.

   

  Method 1:

  I suggest you to check if the Printer Spooler service is started.

  a. Click Start and click Run.

  b. type services.msc in the box run.

  c. find the print spooler service and right click on it.

  d. click Properties and verify that the startup type is set to automatic.

  Method 2:

  Step 1:

  To start in safe mode, follow the steps mentioned below.

  a. restart and keep tapping F8 until you reach the start menu.

  b. Select safe mode and press ENTER.

  Step 2:

  In safe mode, delete the printer and spool driver files. To do so, start Microsoft Windows Explorer, and then delete all files and folders in the following two folders (where C: is the drive where you installed Windows XP):

  C:\Windows\System32\Spool\Printers

  C:\Windows\System32\Spool\Drivers\w32x86

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer not found displayed on the printer control panel. ?

  Computer not found displayed on the printer control panel. It analyzes not but prints ok. Running the utility HP scanner Diagnostic 4.2 says service Windows Imaging does not. If you ignore this message says the Twain service does not work because it is used by another service?

  Problem solved. I managed to get Windows Imaging served running afetr a lot of the research and this scanner enabled to work. Thanks, but does not need your help after all!

• The computer is not automatically connect to the printer

  Sorry, I don't know exactly where to put this question, looking for any help I can get.

  Hi, I work with someone who has a range of printers hp 2035 connected to a desktop computer running windows vista. another person has a laptop running windows 7. It obviously takes the laptop home, and every morning when he connects to his computer laptop back to the network it can see the printer, but not to print on it. HOWEVER, it can print a test page, and after that, it is good to go, until his laptop computer goes idle, date to print a test page to print again to it.

  Looks like the computer is not automatically connect to the printer, but idk a permanent solution, guessing just a bit at the moment and it made the test page thing, but is a bit of waste paper right? any help would be appreciated.

  Original title: thing of strange network printer

  Hello

  Method 1: Run the network troubleshooter, and see if it helps.

  Using the network troubleshooter utility in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  I suggest you perform the steps described in the article:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows    

   

   

  See also:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  I hope this helps.

• Default print profile is not known when returning to the print Module

  With the latest Lightroom CC on a Windows 7 with the latest updates, all of a sudden the printer profile in the print job / the color of the right side of the print Module management framework is therefore more pre-filled with the last printer profile I used. It is always empty when I re-enter the print Module.

  Anyone else got this problem?

  I tried to create a new preferences file, but that did not help.

  Tom

  Hi Tom,

  Could you please create a new catalog and a few images to test if t works well in a new catalog of import?

• Why is it not my icc profile in the 'other' tab in the color management tab in the print module?

  I installed a new icc profile (as I did in the past). It appears in the folder c:/windows/system32/spool/drivers/color as well as everything else. I have the latest update for Lightroom installed. I closed Lightroom, restarted the computer and restarted Lightroom. My other profiles are listed, but this one isn't there. I know it must be added in the menu 'Other' down in the profile section of the tab in the print module color management--but it is just not there. Any advice would be appreciated.

  I just figured it out, and I'll put the answer here in case others run into the same issue.

  I closed the print module and went in the develop module. I went soft proofing (shortcut "S") mode and looked on this list of management-profile-other colors, and it was there. I then closed out proofing and returned to the print module. Now the icc profile was listed. Strange behavior, but there you go.

• MXF OP1a not no projection in the "Format" drop-down menu.  I can't export MXF files.

  MXF OP1a not no projection in the "Format" drop-down menu.  There is a category of MXF OP1a in presets browser, but it is not active.  I downloaded the XDCam MXF presets, but cannot import them because the encoder cannot be identified.  How can I get MXF or XDCam MXF Op1a appears in the Format drop-down menu so that I can import the presets and export code MXF files?  Thank you...

  Hi beating Bits,

  The only thing I want to do is to incorporate a CSC file into an XDCam

  within an MXF.  If you could help figure me out how to do it

  codec to export available in TEA (or Prime Minister), I would be grateful.

  This is not supported natively in SOUL CS6. I'm sorry. Updated SOUL CC for this feature.

  Thank you

  Kevin

• How can I let Adobe know that it is not practical to sub - divide a centimeter (in the print module) in 4ths scale?

  ? How can I let Adobe know that it is impossible to divide a centimeter (in the print module) scale in 4ths?

  Trying to divide the 10 mm in the quarter is a bit silly.

  Go here and submit an enhancement request:

  http://feedback.Photoshop.com/photoshop_family/topics

• Why my picture will appear on the screen when I click the print module in Lightroom?

  I have had no problem printing in Lightroom until this weekend.  Now when I select an image in the library module, then click the print module at the top right, I get the general page for the print module with right and left selection committees - but no picture.  Just an empty space with the grid lines, etc.

  A possible problem, is that I figured out how to contact sheets last Friday (which worked fine).  My problem started next time I open Lightroom, then maybe I clicked on something wrong by mistake when I was doing the contact sheet.  I've been through to get to its previous state, but something still does not work.

  Suggestions welcome!

  Thank you

  Kathryn

  For the record, I understand the problem.  When I created a Board-contact, I used "select flagged photos" to indicate the pictures you want to include.  When I went to print single images, I forgot to turn off this feature and return to "selected picture" for printing.  Where the problem.  Now, it seems to work very well!

• How to make the print command upward in the print module?

  How do the command pring upward in the print module? It is visible in the form is the printer option, but they do not meet my mouse >

  Could you please do that Lightroom is far, Lightroom 6.3

  Lightroom update: keeping up-to-date for Lightroom

  Also please make sure that you have the correct printer selected on the left side under "Page Setup", and correct the paper size.