Inhibition of the Audio on the second visit
I use a scenario branching and I set up variables and advanced to do actions that occur (with a lot of help). I'm still not understanding the process for all this, so I need another class.
In any case, I have them return the same blade three times and I don't want the audio to play on the second, third and fourth visits. Can someone give me the steps to complete this? If there is just too much to try to explain, I understand. I have notes from a class I took where they did this demo even, but of course the information has not stick in my brain.
Let me know if you need more information from me.
-Kristen
Hi again
See if the little video below the help link.
See you soon... Rick
Useful and practical links Captivate wish form/Bug report form |
Tags: Adobe Captivate
Similar Questions
-
Method Get JDev 10.1.3.3.0, not pulling on the second visit
Hello
I'm having a problem with the accessor get and setters of my grain of support not pulling on the second visit to the page. When I visit the page for the first time, it works very well and the calculations are complete but when I revisit the page it doesn't work. Any help would be great. I have setup a custom but phaselistener do not think that is the problem as I tried it on a test page with only field based on him and it works very well.
Thank you."Revisit" a page can mean many things. Are you you speak by using the back button on your browser, or by using the in-application links to access the page? In 10.1.3 ADF is not really compatible back-button navigation. I've seen full button back-support for 10.1.3 House, but it is not easy (basically, it's doing things fantasies with frames, makuing sure that back button always navigates actually a hidden frame and Javascript in this context which submits to having again the previous page request). It's one of these things "I hope 11g coming out soon.
If you actually go back to the page by using the links on the page, it's a little more surpsising. It is certainly the getter which is not put to fire, and not, say, code in the constructor of the Get accessor is dependent on? If the latter, make sure your scope of bean; It must be set to 'request', or you will be reusing an old bean rather than make a new. Otherwise, I'm at a bit of a loss.
-
I have two videos that I would like to combine. But the audio part of the second video is delayed, how can I change so that audio and Visual are equal. IM using windows live movie maker. Thank you
Hello hodginswill,
Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Movie Maker and would be better suited to the Windows Live community. Please visit the link below to find a community that will support what ask you:
-
Hi all
I have two functional screw a loop a set of read and write tasks with device 1 (NI USB-6008). The second loop a set of writing with device 2 (another NI USB-6008) tasks. 2 VI has a massively slower than VI 1 time scale, which means that it must run in a separate loop. Otherwise, VI 2 was created by copying and modifying 1 VI and variable names actions with him (though not, for example, global variables). The two screws are meant to run at the same time on the same PC.
However, if VI 1 is running at the same time as VI 2, any read operations or in writing to 1 VI 1 device are executed - but the VISA read and write operations to a serial device work. When VI 2, all VI 1 functions work fine.
Although I configured channels for tasks using the GUI DAQmx, I execute tasks using reading DAQmx write commands and have correctly defined the task 'create' and 'stop the task' live out the beginning and the end of my loop, respectively.
Does anyone have suggestions for what could be the cause? My thoughts so far:
a. maybe it's some conflicts in the names of variables in memory between the two screws?
b. LabVIEW for some reason any cannot read and write two devices on two separate screws?
should c. I avoid to use DAQmx to configure these tasks (a sort of memory)?
I know I can make it work if I have all together in a single massive VI, but for my application, it is much easier and better to do them in two separate screws.
Thank you in advance for your help!
In case anyone wondered, I found the solution:
When I copied the original code for a new VI, it turns out that the structures of loop timed in the new VI had the same object name in the delivery structure of LabVIEW as timed in the original VI loop structures. This prevents effectively regardless of the VI was executed the second execution of the timed loop. (The serial number read/write suite to work because he was in a different timed loop.)
I found this error when I ran the VI in execution of highlight mode and noticed that the output of 'error' on the timed loop flashed. When I plugged it on my error stream, I found error-808, which explains the above problem.
I have it set by right-clicking on the timed loop, change to a while loop, then change to a timed loop and plug the broken wires. LabVIEW gave the new timed loop object a new name, and all was well in the universe.
-
When I attached a second monitor via a HDMI cable and try to use the duplicate, extend or second screen display modes only, I can get the video to view and run but I get no audio unless I put the laptop display settings to p / only mode. I really want to use the second screen for PowerPoint/Presenter and play a video (with sound). Even if I try to play a video on YouTube, I can't get audio only mode p / screen. Any help would be greatly appreciated. Thank you.
Hello
Please disable the HDMI to force audio to the laptop or use different such as VGA or DVI conection. To hell with its HDMI, please click right "speaker" icon > playback devices > right click and disable the HDMI sound.
Kind regards.
-
losing audio after adding the second screen
Why am I losing my sound after having added the second screen (sony sdm-hs95)?
My customized HP ENVY 17 t-j100 Quad Edition Notebook PC includes:
- • Windows 8.1 64 Pro
- • 4th generation Intel® Core™ i7-4800MQ processor
- • Included 2-year warranty
- • NVIDIA GeForce GT M 740 graphics with 2048 MB of video memory dedicated
- • 17.3 inch diagonal Full HD LED-backlit Display (1920 x 1080) anti-glare Non touch
- • 8GB DDR3 System Memory (2 Dimm)
- • 2 TB 5400 RPM hard drive
- • 24GB flash acceleration Cache hard drive
- • Two batteries of Lithium-Ion 6-cell
- • Blu - ray player & SuperMulti DVD burner
- Backlit keyboard •
- • HP TrueVision Webcam high definition with digital microphone built-in
- • 2 x 2 802.11b/g/n WLAN and Bluetooth® [2 x 2]
Thank you
Hello
How do you connect the second screen? Using HDMI? If so, please disable the sound HDMI playback devices
Right click on the speaker icon > playback devices select > right click HDMI Audio then turn it off
Kind regards.
-
I have 3 different slides in a project who have advanced actions to stream audio on first visit only. When I saw the project, the tip action works only once. Who ever these 3 slides I play first audio aura on the first visit, but the other 2 do not play audio at all. Is it possible that they do not interfere with each other?
A tip action that I use is less and the others are the same but with different audio files
You need a variable to different entry for each slide.
v_entry1, v_entry2 and so on.
-
Audio playback on the first visit only.
I try to use the LSO have a piece of audio will only play on the first visit of the users. Does anyone know the best way to achieve this? Is there a method I could use to set a variable (LSO) when the audio finishes playing/is arrested by the users, or when the Flash application is closed? Any help would be appreciated.Hey, thanks a bunch. This seems to have done.
-
How to calculate the second and minisecond for audio landmark
I'm doing a sound synchronization for the clip audio and video in Flash. I found a tutorial on the web, and it seems to work. However, I do not know how to calculate the second and the mini (deuxieme from mp3 file. The first frame has the following lines to set the duration for each animation:
Import class
Import net.quip.sound.SoundSync;
Stop the main timeline
Stop();
Create an instance of SoundSync
var ss:SoundSync = new SoundSync();
ss.addCuePoint ("IT", 20100);
ss.addCuePoint ("admin", 20000);
ss.addCuePoint ("maintenance", 19800);
ss.addCuePoint ("treatment", 16479);
ss.addCuePoint ("engineering", 14598);
as.addCuePoint ("logo_epa_npdes", 12356);
ss.addCuePoint ("construction", 8967);
ss.addCuePoint ("370 mg/j", 7896);
ss.addCuePoint ("mc_650, 000 ', 5439);
ss.addCuePoint ("130 mg/j", 3254);
ss.addCuePoint ("1938", 2439);
ss.addCuePoint ("vintage_mc", 0);
Use the instance of loading external MP3
ss.loadSound ("Scn04 - 05.mp3", true);
Create a listener object for the
cuePoint and onSoundComplete events
var listener: Object = new Object();
listener.cuePoint = function (): Void {}
Play();
}
listener.onSoundComplete = function (): Void {}
Play();
}
ss.addEventListener ("cuePoint", listener);
ss.addEventListener ("onSoundComplete", listener);
and the soundsync.as file as follows:
Import mx.events.EventDispatcher;
Import mx.utils.Delegate;
class net.quip.sound.SoundSync extends its {}
PROPERTIES
private var _cuePoints:Array;
private var _currentCuePoint:Number;
private var _interval:Number;
private var _intervalDuration:Number;
private var _secondOffset:Number;
Event dispatcher
public var dispatchEvent:Function;
public var addEventListener:Function;
private var removeEventListener:Function;
CONSTRUCTOR
public void SoundSync(target:MovieClip) {}
Super (target);
init();
}
METHODS
private function init (): Void {}
Initialize properties
_cuePoints = new Array();
_currentCuePoint = 0;
_intervalDuration = 200;
_secondOffset = 0;
Initialize the instance of the class as the valid event broadcaster
EventDispatcher.initialize (this);
}
Add Cue Point
public void addCuePoint(cuePointName:String,_cuePointTime:Number):Void {}
() _cuePoints.push
{
type: "cuePoint",.
name: cuePointName,.
time: cuePointTime,.
target: this
}
);
_cuePoints.sortOn ("time", Array.NUMERIC);
}
Get cue point
public void getCuePoint(nameOrTime:Object):Object {}
var counter: Number = 0;
While (counter < _cuePoints.length) {}
If (typeof (nameOrTime) == 'string') {}
If (_cuePoints [meter] .name == nameOrTime) {}
return _cuePoints [counter];
}
} Else if (typeof (nameOrTime) == 'number') {}
If (_cuePoints [meter] .time == nameOrTime) {}
return _cuePoints [counter];
}
}
counter ++;
}
Returns a null value.
}
Get the Index of the current Cue Point
private void getCurrentCuePointIndex(cuePoint:Object):Number {}
var counter: Number = 0;
While (counter < _cuePoints.length) {}
If (_cuePoints [meter] .name == cuePoint.name) {}
return the meter;
}
counter ++;
}
Returns a null value.
}
Get the next Cue Point index
private void getNextCuePointIndex(seconds:Number):Number {}
seconds (seconds) =? seconds: 0;
var counter: Number = 0;
While (counter < _cuePoints.length) {}
If (_cuePoints [meter] .time > = seconds * 1000) {}
return the meter;
}
counter ++;
}
Returns a null value.
}
Benchmark deleted
public void removeCuePoint(cuePoint:Object):Void {}
_cuePoints.splice (getCurrentCuePointIndex (cuePoint), 1);
}
Remove all Cue Points
public function removeAll_cuePoints (): Void {}
_cuePoints = new Array();
}
Beginning
public void start(secondOffset:Number,_loops:Number):Void {}
Super.Start (secondOffset, loops);
dispatchEvent ({type: "onStart", target: this});
Reset benchmark
_secondOffset = secondOffset;
_currentCuePoint = getNextCuePointIndex (secondOffset);
Poll for cue points
clearInterval (_interval);
_interval = setInterval (Delegate.create (this, pollCuePoints), _intervalDuration);
}
Load sound
public void loadSound(url:String,_isStreaming:Boolean):Void {}
super.loadSound (url, isStreaming);
clearInterval (_interval);
_interval = setInterval (Delegate.create (this, pollCuePoints), _intervalDuration);
}
Stop
public void stop(linkageID:String):Void {}
If {(linkageID)
Super.Stop (linkageID);
} else {}
Super.Stop ();
}
dispatchEvent ({type: "onStop", target: this});
Kill the ballot
clearInterval (_interval);
}
Survey benchmarks
private function pollCuePoints (): Void {}
If the current position is close to the cue point.
var time: Number = _cuePoints [_currentCuePoint] .time;
var span: Number = (_cuePoints [_currentCuePoint + 1] .time)? _cuePoints [_currentCuePoint + 1] .time: time + _intervalDuration * 2;
If (position > = time & & position < = span) {}
Send event
dispatchEvent (_cuePoints [_currentCuePoint]);
Advance to the next landmark...
If (_currentCuePoint < _cuePoints.length) {}
_currentCuePoint ++;
} else {}
_currentCuePoint = getNextCuePointIndex (_secondOffset);
}
}
}
EVENT HANDLERS
onSoundComplete
public function onSoundComplete (): Void {}
Kill the ballot
clearInterval (_interval);
Reset benchmark
_currentCuePoint = 0;
Send event
dispatchEvent ({type: "onSoundComplete", target: this});
}
}
any help will be greatly appreciated.Wuzhishan,
> Hi Dave, your tutorial is very cute and it is very useful.
Thank you! My daughter is cute. She inherited all of
me, so I have not left. ;)> I'm sorry that I don't have my question clearly.
No worries. :)
> I have listen mp3 in Windows Media Player and try to
> get both for the tail, I found it on the bottom of the
> player time indicates 00:26.I'm with you.
> How can I writer this number in the code? Is it 0026 or 26?
The code expects milliseconds, then 26 seconds would be written as
this:26000
If he said 01:22 (one minute and 22 seconds), you must write it like this:
82000
... which is 60 seconds for now, 22 seconds
side, then multiplied by 1,000 to get milliseconds.David Stiller
Adobe Community Expert
Dev blog, http://www.quip.net/blog/
"Luck is the residue of good design." -
My computer does not detect the second monitor
I just bought another monitor for my PC. My first monitor is plugged into one of the two VGA connectors at the back of the computer, and my second monitor is plugged into the second slot VGA. However, when I try to detect the second monitor does not work, and he thinks that a monitor is connected. Thanks for any help!
Hello
Power Off the Computer and then plug in the monitor.
How to set up dual monitors in Windows 7
http://www.online-tech-tips.com/Windows-7/How-to-Setup-dual-monitors-in-Windows-7/Two screens are better than one
http://www.Microsoft.com/athome/organization/twomonitors.aspxWork and play better with multiple monitors
http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitorsMove windows between multiple monitors
http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitorsTutorial: How to set up two monitors (Windows) - video
http://www.YouTube.com/watch?v=YFCpaAs5s3cHow to set up multiple monitors
http://www.PCWorld.com/article/157672/how_to_set_up_multiple_monitors.html==================================
You may need to update your display and video driver
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded: run DriverView - define the VIEW
for the drivers Microsoft hide - updated those without drain in their names. (Also updated
the BIOS and chipset drivers.)-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
own the software and drivers and all other main drivers that you have.Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
(Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.
Always check in the Device Manager - tab drivers version you install actually shows up. This
because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
pilot - reboot - check that it is installed and repeat if necessary.Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
be older and cause problems. If updates offers a new driver and then HIDE it (right click on it) and
Then, get new ones manually if you wish.Stop Windows 7 to automatically install device drivers
http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/How to disable automatic driver Installation in Windows 7 / Vista
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
Ultimate and Enterprise)
http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Delay between two operations in the same visa write buffer
Hello
I'm new to labview and have tried to find a way to introduce some delay in milliseconds between two operations in the same buffer of writing a block of single entry visa. Here's what I want it to be like:
CURR: LEV 1.5
wait about 50 ms
CURR: LEV 2.0
wait once again
In fact, I must apply an alternating signal to a coil with a certain frequency through a source of supply of power e3631a Agilent. So if there is another alternative for her, so please let me know.
Thank you
Concerning
Here are two approaches. First being the easiest, simply put a delay between written VISA. The second being a more robust because it allows you to develop a series of commands by simply adding the string array. You might forget the case of the loop if you don't mind the 50mS delay before e first command is sent.
-
Difficulty for the inhibition of the mouse and other 'clicks' does not
I followed the procedure described for the inhibition of the mouse and other clicks in Internet Explorer (model sounds, set Start Navigation and window block pop-up 'None', click OK), but the clicks continue. When I call to the top of the window of his plan once again, the speakers are back next to Start browsing and Popup window blocked. How to make it so that just listening to music is the only sound?
Start > Control Panel > sounds & Audio > sounds tab and disable these windows sound you want / need.
TO return to your pop-up windows, disable the blocker.
By doing this, you can have a gogo advertising. That being said, if the site that you are using ActiveX controls for pop-up windows, you should get a choice to accept or decline their of this particular Web site (between the main window of IE and the toolbar).
See you soon,.
Jerry
-
hang the second monitor for slimline t3600
Hello
I am trying to connect the second monitor and upgrade to 3 GB RAM to 4 GB.
Please let me know what King of the video card and the RAM will be I need?
Thank you
Here are the details of my pc.
HP Pavilion Slimline s3600t PC
-Genuine Windows 7
-Processor of Intel (r) Core 2 Duo E4700 (2.6 GHz)
-3 GB DDR2 800 MHz SDRAM (1 x 2048, 1 x 1024)
-Integrated graphics (NVIDIA GeForce 7100), VGA
-Hard drive 500 GB 7200 RPM SATA 3 Gb/s
-Card G wireless LAN
-LightScribe 16 X MAX drive DVD +/-R/RW SuperMulti
-output port headset 15-in-1 memory card reader, USB 2.
-No TV Tuner w/remote control
-Integrated 5.1 audio channels with front audio portsHere are the specifications of your HP Pavilion Slimline s3600t desktop. According to specifications, your system has a 180 Watt power supply. This power is very unlikely to support a low profile retail graphics card. You can buy a card personalized with reduced HP power but it is very expensive. This leaves the eVGA USB - VGA adapter. About $ 40 - $50, it's a bargain compared to your other choices.
Frank
-
The second listener intake will not work. My DV6000 is one month old.
The second listener intake will not work, but I get static when I plug my headphones in there. The other socket works well. I need help fixing it. My DV6000 is one month old.
Hello
Robert96 wrote:
The second listener intake will not work, but I get static when I plug my headphones in there. The other socket works well. I need help fixing it. My DV6000 is one month old.
One of the is for audio in and one for the audio output. Some versions of some have a plug S/PD/F. Chances are the reason why you get static is that if you connect a headset with a microphone jack, it will try to behave like a microphone. It will not work properly.
Then. a summary. There is only a single take of earphone
Best regards
ERICO -
All,
At the launch of a Flash video in full screen when you are using two monitors, the video freezes at a still image on the second monitor. This happens in mirror and screen extended mode images. The video continues to play normally on the first screen, and the audio continues normally as well. This problem appears only during playback of the video using Internet Explorer, do not not Firefox.
This seems to be a software problem, not memory or devices. To be clear, the video is not stutter. rather, it freezes at a still image. I didn't have this problem using internet explore with the same configuration until I upgraded my laptop Windows 8.
Here is my configuration:
Windows 8. Internet Explore 10.
Shockwave Flash Object: 11.6.602.167
ASUS laptop computer connected to a HD LED TV via HDMI.
GeForce GT650M graphics card.
Core i7 and 8 GB of RAM.
You think, what is happening? Troubleshooting ideas? Thank you.
I just gave it a try on my setup triple monitor, but could not reproduce the problem. I tried both stretching and duplicate the work stations, but they all work as expected. If Firefox works well, then I wouldn't suspect your video driver but it is probably useful to take a look without worrying to do of course, you have the latest driver installed. Then, try to temporarily disable hardware acceleration to see if that makes a difference.
How to disable or enable hardware acceleration?
http://support.Microsoft.com/kb/2528233
Using IE in desktop mode or modern/metro?
Thank you
Chris
Maybe you are looking for
-
Satellite Pro M30: Upgrade faster wireless (54 Mbps)
Hi guys I am the owner of a Satellite Pro M30:Centrino / 1.7 GHz/15.4 "TFT-W/60 GB/256 MB/DVD-R/RW/LAN/Wi-Fi/i.LINK, which has a wireless card intel 2100 3B wireless, which can go up to 11 Mbps" Anyone know if I can switch to another card that can go
-
HP scan and capture visible on a single user
Hello. After the update of Win10 (last week), stopoed to Hp Solution Center. I downloaded Hp Scan and Capture and after a few unwanted, not asked, and asked to compensate all Open an account of window I have need I managed to install on my user. When
-
When you open a video he needs a code
When you open an attachment it tell me that I need a code to view the video.
-
I had virus protection total defence installed. This occurred immediately after.
-
How can I activate display market?
HP Pavillian g6t Windows 7 64 bit How can I disable the display screen?