Initial and hung dashes in lists incompatible

Similar Questions

• I would like to know where to find a friend app has been installed on my phone and who else is listed on it? I would love the history of this app on my phone for today's date, please.

  I would like to know where to find a friend app has been installed on my phone and who else is listed on it? I would love the history of this app on my phone for today's date, please. I changed my phone a couple of times, because the application was initially installed, but I can't work when it has been installed or that has first been listed on it... where I'd get that information from? I do my back ups on my laptop that uses OS X El Capitan Version 10.11.4 on iTunes. Thank you.

  Locate the app in iTunes > window Apps, select it, and press Cmd + I to get info. The file tab should show which account it was acquired on and when. Another I don't think that there is no history, that you can get. All you can see is a current list of those you follow and you allowed to follow you.

  TT2

• How to synchronize the start of IT and relaxation the Scan list (DAQmx Switch)

  Hello

  I want to measure samples of N to the AI0 of Council NI PXI 4461. The measurement starts on a rising edge of a digital triggering provided to the PFI0 of the same Board. The measure is configured with samples of N/2 pretrigged. So far, everything is under control...

  Using an NI PXI 2567 Board, the signal applied at the entrance the 4461 (AI0) switches between a V2 and V1 signal. I would like to synchronize the switch between the two signals with the trigger signal applied to the input of the PFI0 Governing Council 4461. In order to obtain samples of N/2 of V1 and V2 samples N/2. Synchronization of 1 to 5 ms would suffice!

  My question is how to synchronize the start of acquisition of AI pretrigged of 4461 with the switch control given by the Council of 2567?

  Thank you in advance for your help...

  PS: the configuration of the system is:

  -LabView 8.5

  -Chassis PXI-1044

  PXI-4461 on slot 2

  Module 4-slot PXI-2567

  Hi Frederic,.

  I came back to this recently and used the following examples to run the desired synchronization.

  PXI-4461: Acq & graph tension-Int Clk - dig Start & Ref .vi

  Samples per channel = 1000

  Rate (Hz) = 10000.00

  Start the trigger Source = / [name of the instrument DAQmx] / PXI_Trig0

  Onboard start = fall

  Reference Source Trigger = DAQmx Device Name] / PXI_Trig0

  Reference edge = fall

  Trigger samples = Variable (100, 500, 900)

  PXI-2567: Switch Scaning-SW Trigger.vi

  Advance the output terminal full = / [name of the instrument DAQmx] / PXI_Trig0

  Scan list = / [name of the instrument DAQmx] / ch0-> com0.

  Scan list = / [name of the instrument DAQmx] / ch1-> com1;

  Hardware configuration:

  The PXI-2567 module controls an external relay that switches between the voltage of 5 V on ch0 and ch1 0 V.

  The PXI-4461 connects to the COM of the external relay and therefore reads 5V when ch0 is connected; 0 v when ch1 is connected.

  Procedure: The above examples are used in the following procedure.

  1. run the PXI-4461 VI.  A start trigger (falling edge) is necessary to start collecting samples before firing.

  2. launch the module, PXI - 2567 VI.  When ch0 is initially (and immediately) on com0, a trigger is sent to PXI_Trig0.  The PXI-4461 will begin to acquire samples before firing.

  3. - click on the "Connect to the next" button on the front of the PXI - 2567 VI module.  This sends a trigger to entry software for the PXI-2567 module and the transitions of the scan for ch1-> com1 list.  Once the PXI-2567 module remains (debounced), advanced complete relaxation is sent on PXI_Trig0 for the PXI-4461.  The PXI-4461 will begin to acquire samples after outbreak.

  Note: Instead of the trigger of the software entry, an external input trigger can be used (e.g. PXI_Trig1).

  Results:

  > Before instant release of samples = 100

  Delay is caused by the time of actuation of external relay.

  

  > Before instant release of samples = 500

  Delay is caused by the time of actuation of external relay.

  

  > Before instant release of samples = 900

  Delay is caused by the time of actuation of external relay.

  

  I hope that the attached screws and the explanation above helps you and/or other customers who have this problem.

  Best regards

  Chad Erickson

  Switch Product Support Engineer

  NOR - USA

• Grep to remove parentheses and add dash here

  Hi guys,.

  I have long paragraph Notes with parenthesis between the numbers.  Here is the sample photo

  

  How can I write a GREP command for

  (1) remove all parentheses in the list (as in the example number 1 in the text)

  (2) add a space after the number

  (3) add the Indent here at the beginning of the text.

  If it's too complicated just with the removal of the brackets would be great!

  Thanks for any help and best!

  S

  Your typical grep added a tab and a return. My grep has added to the tab.

  If you want to use the indent to here instead, try to use this to replace it:

  $2 ~ m ~ I

  This will give you the number, an m-space and character dash out.

• I can't find my old emails that is to say the last 4 years e-mails have disappeared. I can't see in the 'archives' folder list and also in my list of "local" files

  I can't find my old emails that is to say the last 4 years e-mails have disappeared. I can't see in the 'archives' folder list and also in my list of "local" files
  I recently formatted my system. It causes this problem? Is there anyway to recover my emails?

  Assuming that really format you your hard drive.
  Can erase you every single entry to a file, message, photo, program, document, etc. When you select format you get warnings on this subject.
  The format is the last thing you want to do without going through a backup of your personal and important files.

  Local folders is automatically created when you installed Tbird.
  And it is empty until you move something over there.
  (Your former local folder with all its files and messages has been removed under format).

  Only messages that are still on your server (stbeehive.oracle.com) can be recovered.

• Why is a compatible video .mp4 and a second video .mp4 incompatible?

  Why is a compatible video .mp4 and a second video .mp4 incompatible?

  W.W.

  Why is a compatible video .mp4 and a second video .mp4 incompatible?

  Normal reasons include: use no standard or incompatible code settings, workflow that modify the data standard file container or file corruption.

  

• After formatting and reinstalling firefox exception lists are already filled.

  I've just formatted my laptop and reinstalled windows and Firefox. After importing my old favorites, I installed Adblock Plus and pulled up to my old block list. Then I updated Windows and then install small stuff like 7zip, Symantec,... and the next thing I know is that Firefox slowing down and when I checked, lists of the exception for pop ups, image loading and Add-ons have been completely full - and I didn't know everything of the first hundred of sites listed.
  How can this be? I went only to pages like youtube, yahoo and google, and only after the installation of symantec...
  Help is greatly appreciated!
  Thanks in advance!

  Pasanius

  Some security software can be added to that list Spybot S & D is known to add a list of vaccination, but other security software can do the same.

  http://KB.mozillazine.org/Firefox_hangs#Internet_security_software

• How to convert Outlook Express to Outlook without losing files or existing e-mails and taking my contact list with me?

  original title: change of e-mail

  How to convert Outlook Express to Outlook without losing files or existing e-mails and taking my contact list with me?

  Hi KennethPickering,

  You can refer the following Microsoft Knowledge Base article and check.

   

  How upgrade from Outlook Express to Outlook

  http://support.Microsoft.com/kb/287073

  Let us know if it helps.

• I wonder if InDesign CC does a better job before kerning and after the dashes-n and m-dashes?

  I use InDesign CS6 but will move to CC soon. I wonder if InDesign CC does a better job before kerning and after the dashes-n and m-dashes? It seems unprofessional to have a complete space before and after, but it takes a lot of time to browse and kern each of them.

  If the font kerning between/em-quadratins is too tight, you could do your F/R to remove the space before/after and replace it with a thin after space.

  With Helv. Neue, when the paragraph style is the metric value when it is followed by a number, it is rather tight. Optics for the style of kerning setting seems to relieve that, giving a little more breath between dashes: on the left, the style is set on measurements, on the right is optical. Note that the most important effect is the half-quadratin before the number 8. The dash does not seem to suffer from this problem, regardless of the method of automatic kerning. But this half-quadratin is tight against the 8.

  

• Help the bean Ticker - how get time initial and end of string

  Hi all.
  
  I use on a windows forms 11g Rel2 machine.
  
  I try to get the report initial and end of the ticker bean time string.
  
  According to the documents, you must proceed as follows:
  
  fbean. Invoke ("CONTROL. BEAN_AREA', 1, 'getTimeString');
  
  While I did it, and no error is reported, I don't know how to store that value to a variable of forms. The idea would be to tell the user the time it takes to run a particular process. To do this, it would be nice to get the initial report and end time.
  
  I guess this could be done using an EVENT WHEN CUSTOM-POINT and: system.custom_item_event, etc. but have no idea how to go on this issue.
  
  Help will be greatly appreciated.
  
  Best regards, Luis... :))

  Method to obtain the time of currzent:

  Declare
    cur_time  Varchar2(100);
  Begin
    cur_time := fbean.invoke_char ('CONTROL.BEAN_AREA',1,'getTimeString');
  End;
  

  François

• Copy and paste an Excel list in a dropdown list

  Is there anyway to copy a list of items from Excel and paste into the list of items in Adobe Acrobat Pro XI?  I have instructions on how to do this in earlier versions of Acrobat, but not the version XI.  I need to copy the account names of Bank 300 + in a wire transfer form, and I don't want to enter everything manually.  Help, please!

  Here is a link to an example document that shows one way to do, via the script: https://workspaces.acrobat.com/?d=sIJoabh12oYOY19AuTZ9yw

• Customization of file exchange: what is the initial and maximum size recommended?

  Hi everyone and hurt.

  
  After response of harm to my question on how to install diskettes, evil said:

  
  "allocation of disk: is a three step process, first of all, you set the boot order in the BIOS, then you format the windows disks and assign drive letters, then again Windows you set up for the swap file." Then the allocation of media preview cache, project etc. is made in preferences, and setting up a PR project."

  
  and I have a question about the pagefile.

  
  First of all, let me tell you describe my new machine, there a configuration to 4 disks, no RAID, 16 GB RAM, with OCZ Vertex3 for programs and the OS, which I installed Windows 7 Ultimate 64 bit on this disc, Web Premium CS5, and Acrobat 9 Pro. In the BIOS, I did drive OCZ (OS), be the priority in the boot order.

  Later, after checking the system is functioning, I'll upgrade to Classic Collection CS5.5, so at this point, I named my 3 expansion packs to this title.

  
  WDC WD 2002FAEX-007BA0 - "Media Projects (D).
  WDC WD 1002FAEX-00Y9A0 - "Swap file, media Cache (E)"
  WDC WD 1002FAEX-00Y9A0 - 'previews, Exports (F).

  Then, because now they are simply names I gave on different drives, and I'm trying to change the paging file, switching happens in the disc of the operating system, in order to arrive in the disk that will be designated for media Cache (by the Prime Minister, subsequently).

  Thus, in the performance of Windows Options pane, I went to the Advanced tab, and under virtual memory, I hit 'change', uncheck automatically manage file size exchange for all readers, select drive E, which is the drive that is having the pagefile to happen there.

  And the question, assuming that I'm supposed to select custom, size can harm you, or / and others, please recommend the initial and maximum size?

  Alternatively, I have to select "system managed size"?

  Thanks :)

  Minimum,.

  Where you put the pagefile just does that much of difference, when you have 16 GB (as you do) and 24 GB still less so (as the user in the other thread).

  If I had your material, I put on E: and make static at 16 GB min and max 16GB (bad suggests same size).

  I don't spend more time reading or to dwell on "static pagefile" However unless you want to purely for fun.

  When you have enough RAM that your applications require no more you have, Windows must either ask for a large part of this file. Ten years when the RAM chips were much smaller and the cost per GB was more expensive that now, details of page file were indeed more important than they are today.

  Jim

• ComboBox and its drop-down list

  How can I adjust the space between the combox and its drop-down list? I would like to than the drop-down list to appear as a 10px above the drop-down list box. Anyone who manages to do this?

  If you googled around, I've seen posts of people who have changed the ComboBox control to open instead of to the bottom.  This approach can be a good starting point for your development.

  After a quick glance, I am sure that you would need to "change" for the private method named displayDropdown; because that's where the drop seems to be positioned.  (line 1573 in the Flex 3 SDK).

  You can probably write code to move it in the method of getter or updateDisplayList. but I don't know what Visual anomalies that will produce.  Otherwise, it seems that you might be stuck monkey patching.

  Good luck; I would like to know if I can help.

• Channels I "sliding and dropped ' in a list box cannot be" sliding and dropped "listbox origin. How can I fix?

  I currently have 4 list boxes that are allowed to have their values of string slipped and fell another 4 listboxes (in any installation: first listbox to the fourth, the second to the third, etc.).

  However, as part of my intentions, I want to be able to take the strings I have initially D & D and bring them back to their original, respective list box.

  I tried the following and it did not work (not to my surprise):

  I have a case of processing event in 3 parts with the following parts: [1] Final listboxes (target) - 1,2,3,4: Drag from?

  [2] initial listboxes (source) - 1,2,3,4: drag validate

  [3] initial listboxes (source) - 1,2,3,4: Drop

  Thanks to the one who answers... very appreciated.

  Sincerely,

  IHopeThisIsAValidAlias

  By following the instructions described in the fromm8 article I don't see any problems.

  My feeling is that you turn off the natural drag & drop behavior of your drop-down lists: "the drop [s] event management overrides the typical capacity of a listbox.

  Knowing this, your event should add functionality that you took (or stay away from the events that you can not imitate).

  You mentioned using drag from?, enter Drag and Drop but without explanation a lot better the way you use the or example code it is impossible to determine if you really need to use these events or not.

  My recommendation would be to stay away from these events and, as the article points out, the Drag ended event works while preserving the D & D of the ListBox.

• CSS refresh after javascript DOM change (tab Ajax control) and also refresh the list of objects of Navigation

  Hi all

  When I access a Web page, that I created in the browser or Widget that uses an ASP.NET Ajax Control Toolkit Tabs the action of switching between tabs works well but the tab header does not reflect the change to display the active tab.

  In a standard browser of the tab header will be change / light tone based on the css classnames active Ajax control for settings changes dynamically in the DOM when switching between tabs and I was wondering if maybe the BB browser will not reflect/refresh css when changes on the client side affect the DOM? If that's the case (?) is there a way to force that change somehow?

  Also in the same direction and on the similar question I posted yesterday on switching between Navigation power user mode in a Widget, so javascript client-side dynamically is change the 'x-blackberry-focus' of a DOM object possible to have the change reflected in the Navigation objects? Or is the list of objects that can be traversed only generated load initial page and cannot change without a new post?

  Thank you

  Derek

  I solved the problem with the Ajax Control Toolkit TabContainer uisng having to do a "dummy" DOM change in the TabHeader after that the tab is passed between the tabs then forcing the refresh and repaint the tab headers.