I wonder if InDesign CC does a better job before kerning and after the dashes-n and m-dashes?
I use InDesign CS6 but will move to CC soon. I wonder if InDesign CC does a better job before kerning and after the dashes-n and m-dashes? It seems unprofessional to have a complete space before and after, but it takes a lot of time to browse and kern each of them.
If the font kerning between/em-quadratins is too tight, you could do your F/R to remove the space before/after and replace it with a thin after space.
With Helv. Neue, when the paragraph style is the metric value when it is followed by a number, it is rather tight. Optics for the style of kerning setting seems to relieve that, giving a little more breath between dashes: on the left, the style is set on measurements, on the right is optical. Note that the most important effect is the half-quadratin before the number 8. The dash does not seem to suffer from this problem, regardless of the method of automatic kerning. But this half-quadratin is tight against the 8.
Tags: InDesign
Similar Questions
-
After the upgrade to windows 8, why the brightness adjustment is no longer works on HP Envy17 2290nr? Went to set the charms and brightness controls do not work here either.
Hello DJSZCZEP. I understand you are having some problems with control of the brightness of your laptop in Windows 8.
HP is still drivers for the update for Windows 8. Most laptops that have been purchased after October 1, 2011 must be supported at the time. Here a link to more information on the upgrade to Windows 8 and HP.
The support page for your laptop does not currently listed drivers for Windows 8. This does not mean that Windows 8 does not work on your laptop. This simply means that some features and functions may not be available. Advanced features like the brightness control can be handled by the driver itself and require a complete driver for features. Your the tender specifications lists the video card like the ATI Radeon 6850 M. Here are the drivers for the 64-bit version of Windows 8. Try using these drivers and tell me if this solves the problem.
Keep an eye on the support page of your product for updates, including drivers for Windows 8. I hope it's useful.
-
nones
Yes it's true. You just need to download the .exe file top of page (Firefox Setup 25.0.1.exe).
Save it to your computer, double click and you should get a wizard to guide you through the installation.
-
My Blu - Ray player does not connect to internet at all after the firmware update
before the update, I use to be able to connect to the internet, but now, it says there was a problem one can not connect. Help, please!
RESET the unit to FACTORY settings?
Perhaps this is an option, which will get you to where you were before the update.
-
Add/Remove Programs does not locate all my programs installed after the replacement of hard disk
I recently had to replace the hard drive of my laptop. We have cloned the original on the new hard drive. The programs are all visible in Windows Explorer in the directory program files. However, they are in the utility "Add/Remove Programs". I can't open the program in exe files. I am told by the manufacturer of software, in one case, I need to uninstall the program and reinstall it. I can't uninstall it without the Add/Remove utility (or can I?) Thanks for your comments
Try to reinstall the program without uninstalling. Boulder computer Maven
Most Microsoft Valuable Professional -
InDesign CS6 reinstall with beta key
Hello
I have a computer with InDesign CS6 installed and I will be performing a clean install of Windows 10. I used a key Locator to find the key and spoke with a conversation agent who told me it was a beta key.
My questions are:
(1) where to find the InDesign CS6 installer that works with this key?
(2) I'll be able to use this key for the installation of InDesign CS6 after completing the clean install of Windows 10?
I appreciate any assistance. Thank you.
* edit * I don't know where the key came from, or who bought it (if not free), right now.
Series a beta version is valid only during the beta and is not valid after several years. You must purchase your own license. I wonder if the Version worked so long after the liberation, normally, it stops to work when a product reaches the market.
-
My InDesign CS6 does not open after expiration of CC 15 day trial.
My InDesign CS6 does not open after expiration of CC 15 day trial. The only option is to subscribe to the CC. I don't want to subscribe, I want to use my copy of the CS6. I uninstalled and reinstalled ~ no still no chance. Anyone know how to open it?
If you have installed cs6 install the subscription, it will capture your license CS6. Common sense would have been to disable CS6 before install CC as CS6 contains its own (and better kind) CS6 software with more upgrades and possibilities than the old version in a box.
If you can not install CS6 with your own serial number for this reason, you will need to contact Adobe to reset the activations.
-
Hi all
I worked on SET a CS6 plugin to CC2015 (8.0.0 on 11.0.0). SDK
After you get the code to compile against the new SDK, when I try to load, I get the following message:
Adobe InDesign does not recognize PLUGIN_NAME *. PLN as a plug-in...
Any thoughts?
Thank you
Ido
Hi David,
InDesign CC 2015 is available in 32-bit and 64-bit. You must create your plugin as the two versions. Have you checked that?
Markus
-
Cloud to adobe InDesign download fails with shoing error it can not extract the files in the temporary file. I tried several times and restarted does not. What can I do about it?
To refer to EX11 some:
Creative cloud (WIP) error codes | Error postal codes of Mylenium
Mylenium
-
InDesign does liked after the 11 Feb update.
Hello
Does anyone have problems with InDesign after the update?
My InDesign does not start and stops responding after a while. This started happening after the update Feb. 11. Execution of RiMac with Yosemite 10.10.2
Thanks for any help.
Kind regards
KALOU
Have you restarted your computer?
You have restored your InDesign preferences?
Garbage, replace, reset or restore the application's preferences
-
InDesign CS5 does not start correctly
My Indesign CS5 does not start.
I don't see the program to start, but if I go to the "active processes management" I can see it running.
Thus, the program starts, but I don't see its interface.
My OS is W7 professional.
This problem affects me for a week.
I tried to uninstall and reinstall without results.
PS. I have a Premium Suite CS5, and other programs works fine.
Thanks for the support
Ciao, Peter,.
Finally I got it! The problem was on the ID fields, where to load the application.
I have two monitor, managed by the nView Desktop Manager. So ID has been busy away from my office, I know not why.
But strangest of all, ID no was not shown in the application tab in the 'management of active processes.
So I disabled the Manager the nview and ID appear.
But it is a big bug ID, which Adobe has to manage.
Thank you very much for your help.
Ciao, Luca
-
InDesign CC does not let me save or save as a file
InDesign CC does not let me save or save as a file
When I removed an inDesign placed in the file is then saved, and then I exported the Indesign placed in PDF file and placed it in the InDesign file.
All fixed.
Note to self PLACE FILES IN INDESIGN INDESIGN FILES.
-
I downloaded InDesign CC but get this message when I try to open:
"Cannot launch Adobe InDesign that you do not have sufficient permissions to access the preferences folders. Be sure that you have appropriate permissions and restart Adobe InDesign".
I don't know how to solve this. Please help! I tried to uninstall/reinstall and restart my computer. Successfully, I downloaded Adobe Flash CC before that and opened it without problem.
See replace your preferences to find the TWO folders where are stored the preferences. If you do not know how to view files and folders hidden on your operating system you will have to Google to learn. Once you locate the files, the rest permissions to allow read and write access to everyone.
-
I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect. It worked fine with the previous modem (a rented one TWC). Help!
Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.
Turn off the new modem for at least 30 minutes. More is better.
Perform a hard reset on the AirPort Extreme, then it turned off.
Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port
After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.
Then, turn on the airport and let it run a few minutes
Set up AirPort Extreme again
Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.
-
Update failure after the last Beta v32 downloads
After the updated beta version 32, I am unable to download files.
The status of the download hangs at about 1 second left each time.
I'm behind a proxy at work, but the download of the file did not have a problem in the past.
It's the recent9 b 32.0 and it has been fixed and will be in the build 32.0 then, probably the RC1 build 32.0 if normally such a fix would be a beta version as 32.0b10. The release is Tuesday next so little time. Type of topic: config location bar (address) and you can try to change the empty value of browser.safebrowsing.appRepURL in the meantime. An empty value does not work you can try https://sb-ssl.google.com/safebrowsing/clientreport/download?key=%GOOGLE_API_KEY%
For not not reading the useful comments are bug / spam.
Bug 1057764 - Download Manager regression in the update of FF32 beta 9
Maybe you are looking for
-
Hello I use post step reminder of failure to manage failures in my sequence. The sequence of reminder post not failure has many steps inside. I realized that other reminders like post step runtime error reminder and Post result list enrty do not work
-
Can hear something running in the background...
How will I know what kind of program running in the background while I'm on the computer, but I don't know what it is? tonight it happened to my antivrus that I thought that I was paying for through the ad company... hmm... ??
-
How to activate the led of the failed drive?
Hi all We have logic equal dell box its out of warranty. I support this box remotely. I need guide people data center to replace the failed hard drive. Please tell me Q) how to activate the led of the failed drive? same as 'netapp. " I noticed that B
-
is there a way to permanently prevent Windows edge to take by default Adobe for PDF files
apparently a common problem is that the edge browser enters default status to open the PDF in Adobe Acrobat files. There are several articles on how to change a registry key and the other on the MS Tech site on how to make a backup and a restore all
-
Save as GIF turns edges of text in stairs?
I have a drawing with some text. When I save as a GIF for a t-shirt design site download my beautiful smooth text edges become jagged. I need GIF transparency and is a file format that supports the site but I want to smooth the edge. There is an o