initialization-crashdown diskwindows does not start

Similar Questions

• Satellite 2450 does not start - only in safe mode

  Hello

  I'm having a problem with my Satellite 2450 where it is not initialize properly - is stuck in the screen of Windows XP (just continues to scroll through and hangs there).
  I can boot into safe mode.
  Have not had any other problems with it - no errors, do not have installed/uninstalled anything recently.

  Any ideas what could cause this problem?
  Do you think I should use the recovery disk to reinstall the OS? Anything less drastic I can try?

  any advice appreciated,
  Thanks in advance.

  Hello

  Usually, if the laptop does not start correctly in normal mode, but only in SafeMode because some drivers or / and software applications are false or defective.
  In this case, the recovery procedure should solve this problem.
  If you n t have the Toshiba Recovery CD, you can install from the original CD of Microsoft's operating system, and then you can try to install stuff together from Toshiba (driver, tools)
  These software, you will find on the page of the Toshiba driver.

• SSD external via USB does not start by default

  Hello Apple community.

  I have a problem with my new external SSD. Given that the base model Mac Mini end of 2014 comes with a disk HARD 5400 RPM drive, I wanted to go to an SSD without having to tear the whole unit. I wanted to exhaust the option 'boot from USB' and I'm having a strange problem. I cloned my Mac to the new drive SSD and slapped in a box set of the speaker. I connected via USB and changed my 'startup disk' to use the external SSD drive. However, it does not start on this unit automatically. When I reboot and discovers the "boot manager" I see the USB being initialized automatically. After disconnection / re - plug the drive in, it appears as a boot option. Once it is initialized, everything works fine and I can boot into El Capitan without any problem using the SSD.

  I am trying to find a way that I can get the Mac to initialize the SSD to the boot upward and choose default. I don't want to have to re - connect the drive whenever I want to start on the SSD drive... Any help and suggestions are greatly appreciated!

  My equipment

  ===========================

  Model Base of Mac Mini (end of 2014)

  1.4 GHz Intel Core i5

  4 GB of DDR3 1600 Mhz

  OS X - El Capitan v 10.11.3

  240 GB SanDisk SSD more - connected via USB3.0

  What unit do you use for the SSD?

  Can you provide a link?

  If the SSD is delivered with a box to provide a link to that,

  How do clone you for the SSD? What app did you use?

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  Subject of memory NVRAM and PRAM

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  -If it is repairable, reinstall the OSX. Nothing shall be lost

  How to reinstall OS X on your Mac - Apple Support

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• Satellite A660-186 does not start when the USB nano-receiver is connected

  Recently I bought a mouse a4tech g7-750 with the nano-receiver into usb port plug.
  After the nano-receiver is inserted into the USB before lighting, computer laptop does not start.

  Only the cursor is displayed, so that it is displayed before the screen with the ability to enter the F2 BIOS or select the F12 boot device.
  Without the nano-receiver laptop runs without problem.

  Any advice?

  Thank you much in advance.

  Hello

  During the POST (power on self-test) all parts laptop as RAM, motherboard (also of connected devices) is enabled.
  If a problem (compatibility problems, etc.) would be detected during POST, then the laptop would not initialize correctly.

  This mouse nano-receiver is unknown to me and I m not very well what s wrong with this unit, but I doubt that this problem is related to the laptop.
  I guess that the laptop starts properly with other devices connected to the laptop. right? Well well, in such cases, there s no question cell phone but the 3rd unit affect the functionality of the laptop.

• Satellite C660 does not start on disc or USB

  My Toshiba Satellite C660-DSC0QE app, BIOS version 1.80, will not start Windows more - it just goes to the dreaded black screen with white cursor.

  I tried a system Win 7 recovery disk, a USB with software from Kaspersky on her recovery and even a full Win 7 installation disc, and it does not start at one of them.

  The boot order is set correctly, (optical drive or USB port) devices are read, but their initialization never actually in them - there is an obscure error message, or it acts like they weren't there at all.

  The obvious answer to these forums seems to be disable secure boot mode and then switch the to the CSM UEFI boot mode. Easier said than done - the menu options don't exist at all in my BIOS/CMOS screens.

  Finally, I see no way in the instructions to get a BIOS update occur without being already in Windows on the PC - http://aps2.toshiba-tro.de/kb0/HTD9502M10000R01.htm I'm assuming that the BIOS version 2.00 would have these options.

  Any help gratefully accepted!

  Hello

  I assumed that you have a white blinking cursor in the upper left corner.
  Is this correct?

  These symptoms appear where the system can not find a boot device (HARD drive) or memory problems (RAM module).

  First of all, you said that you have UEFI / CSM boot mode in the BIOS settings.
  So I m asking you what parameters of start mode appear in BIOS exactly?
  Find you these settings in the right area?
  Usually, you should have an area (tab) called security in the BIOS.
  In most cases, you will find a safe boot option, but the Satellite C660 does not support this option because it s too old.
  But the startup mode (UEFI /CSM) should be available in the BIOS. Check the settings in the BIOS of the system area

  Anyway, as I said above; It could also be a memory problem, so I recommend you to check if the memory is OK.

• Satellite L650 does not start sometimes the Power button

  Sometimes when I press the button works / starting the fan of laptop and the laptop does not start.
  However when I press once again lights up.
  This does not depend on how long you keep holding the power button so that it starts.
  Anyone facing this problem.

  Thank you.

  What exactly do you mean by does not start?
  Is this means that the laptop has been closed or has been set to standby or hibernation mode?

  Are you able to see the Toshiba start screen when you switch on the device?
  If fans hang on this means that the laptop has been put under tension, and then you the OS should start to initialize.

  PS: usually it s no matter how long the power button could be pressed. Briefly press (1 sec) should turn on the laptop.
  But if you do not want to power OFF using the Notepad works / stop, then you will need to tap more long time 4 sec long but it is not recommended that this reset should be made only if the OS hang

• Server 2008 R2 Active Directory Certificate Services does not start

  Hello

  I had a power failure on both of my units of WD Sentinel DX4000 running Windows Server 2008 r2. Come to fine and checked the integrity but now a unit gives me an error and does not start the Active Directory Certificate Services. I checked google and read where I need to run the eseutil.exe on the CA database, but discovered that utility is provided only with the server Exchange that I'm not running. Is there another utility that allows you to defragment and correct the Microsoft database. Here is the error I get when you try to start it:

  Log name: Application
  Source: Microsoft-Windows-CertificationAuthority
  Date: 28/07/2014 06:01:39
  Event ID: 17
  Task category: no
  Level: error
  Keywords: Classic
  User: SYSTEM
  Computer: WDOffice
  Description:
  Certificate Services Active Directory did not start: could not initialize the connection of database for WDOFFICE-CA.  Error 0xc8000147 (SEE:-327).
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      17
      0
      2
      0
      0
      0 x 80000000000000
     
      40337
     
     
      Application
      WDOffice
     
   
   
      WDOFFICE-CA
      Error 0xc8000147 (ESE:-327)
   
  

  Any help would be greatly appreciated,

  Thank you

  Bob

  BBob

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Computer does not start after the screen goes blank & Compaq.

  Hello

  A few weeks ago, I turned on my PC and it showed at the Compaq screen and then went to a blank screen & would not respond. I held the switch button to turn it off and after 4 attempts, it start fine. Next time, it took 20 attempts to initialize and now it does not start, it will be maybe if I try like 100 times he can do... The problem is when the Compaq screen comes up it comes only for like a second so I know that it does not start, if the Compaq screen stays for a few seconds as 3 + I know it will load windows and start.

  History > the computer originally had XP and has been replaced with VISTA memory was 2 * 512MB, but it was a bit slow and I was advised to upgrade. I bought 2 * 1 GB memory and put it in my PC a few months there may be 5 + had no problem so far.

  I tried the following:

  Remove the memory and replace it. Remove the 2 * 1 GB of memory and its replacement by the Moose 2 * 512MB to check if the memory is at fault.

  Cleaning of the dust around the fan (at this point, I removed the fan over the CPU and cleaned the thermal compound from the CPU to make it nice and shiny, only tried to start one time after that for a few seconds heard blowing fan and turend it took off. Depuis_lors, I realized that it wasn't just muck and had a purpose na derwiche put a little more on)

  Remove the battery of the BIOS for half a day

  Move jumpers CMOS from1, 2 to 2, 3 positions

  I can not get into the same if BIOS start and hold F1 he will show me the BIOS for a second and then go to a black screen.

  Specifications of the computer

  Compaq Presario SR1629UK desktop PC

  Details can be found in the following link

  http://support.HP.com/us-en/document/c00579251

  Your help would me much appreciated...

  Hi guys,.

  Thanks for your help, I wanted to just give you a batch update. After the grueling process of verifying the destop, memory suppression, cleaning it & all the other techo checks. I gave my pc to somone to look to the he tried not to turn on he opened it removed cleaning my thermal paste back on and told me it was working fine.

  When I bought home all happy, I realized that I had the same problem, I borrowed another monitor and found it worked well! So the question is with my monitor, if anyone has the same problem first check another monitor.

• AOE 2 - does not start in Windows 7

  I am running AOE RIse of rome from my laptop (Dell) on Windows 7. The game does not start. I get an error message saying "could not initialize graphics system. Make sure that your video card and driver are compatible with directdraw.

  Harshab85,
  This game appears to be compatible with Windows 7.  You can uninstall and reinstall just to be sure it is not a problem with the installation.  It is possible that the video drivers support hardware acceleration.  You should check with the manufacturer of the video card for the drivers updated and know if they support hardware acceleration.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error: 80070426-Windows Update may not install as Cryptographic Services does not start.

  Hello!

  As you can guess Windows Update is not installed for a few months. Cryptographic services does not start . CPP is the beginning.

  Error: 80070426

  Already tried a few suggestions MSKB.

  Method 2: Set Cryptographic Services to automatic, network logon. Result: Error (unsigned) 1083
  Method 3: Rename the Catroot2 folder
  Reregister DLL files that are associated with Cryptographic Services.
  However, suite couldn ' t be installed.

  regsvr32 initpki.dll
  regsvr32 gpkcsp.dll

  regsvr32 sccbase.dll
  regsvr32 slbcsp.dll

  DCOM service - access denied when running.

  sfc/scannow couldn't fix some corrupted files.

  Computer HP laptop came with Vista pre-installed, so I do not have the repair disk.

  No doubt the system restore won't help, as I remember recently that c-Cleaner wiped the old restore points.

  NOD32 Antivirus + Spyware Doctor still running. Already run MSRT and Super Spyware, but nothing much.

  Kindly help!

  Kind regards

  Satyajit

  Diagnostic report (1.9.0011.0):
  -----------------------------------------
  Given WGA-->
  Validation status: genuine
  Validation code: 0

  Code of Validation caching: 0x0
  Windows product key: *-* - GD2PK - BD3R2-44MV3
  The Windows Product Key hash: f7FPE6g/CLFmnJ4E6GbEU9Xn1sA =
  Windows product ID: 89572-OEM-7332166-00021
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.0.6000.2.00010300.0.0.002
  ID: {5FC29B42-80DC-4BE3-B5EA-37281853FA7D} (3)
  Admin: Yes
  TestCab: 0x0
  WGA version: registered, 1.9.9.1
  Signed by: Microsoft
  Product name: Windows Vista (TM) Home Basic
  Architecture: 0x00000000
  Build lab: 6000.vista_gdr.080917 - 1612
  TTS Error: M:20091104073513946-
  Validation of diagnosis:
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: 6.0.6002.16398

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 103 blocked VLK
  Microsoft Office Enterprise 2007 - 103 blocked VLK
  Microsoft Office Home and Student 2007-100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_B4D0AA8B-920-80070057

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 7.0; Win32)
  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\Slsvc.exe[6.0.6000.16509]
  [File mismatch: C:\Windows\system32\drivers\Spsys.sys[6.0.5840.16389]
  [File mismatch: C:\Windows\system32\Slcext.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\advapi32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\kernel32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\rpcrt4.dll[6.0.6000.16525]
  [File mismatch: C:\Windows\system32\authz.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\msvcrt.dll[7.0.6000.16386]
  [File mismatch: C:\Windows\system32\samlib.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\ntdsapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\dnsapi.dll[6.0.6000.16615]
  [File mismatch: C:\Windows\system32\ws2_32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\nsi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\user32.dll[6.0.6000.16438]
  [File mismatch: C:\Windows\system32\gdi32.dll[6.0.6000.16766]
  [File mismatch: C:\Windows\system32\msimg32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\powrprof.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\setupapi.dll[6.0.6000.16609]
  [File mismatch: C:\Windows\system32\oleaut32.dll[6.0.6000.16609]
  [File mismatch: C:\Windows\system32\ole32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\shell32.dll[6.0.6000.16774]
  [File mismatch: C:\Windows\system32\shlwapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\version.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\winmm.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\oleacc.dll[4.2.5406.0]
  [File mismatch: C:\Windows\system32\mmdevapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\wtsapi32.dll[6.0.6000.16553]
  [File mismatch: C:\Windows\system32\regapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\crypt32.dll[6.0.6000.16425]
  [File mismatch: C:\Windows\system32\msasn1.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\userenv.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\secur32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\netapi32.dll[6.0.6000.16764]
  [File mismatch: C:\Windows\system32\psapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\netrap.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\wldap32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\winbrand.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\iphlpapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\dhcpcsvc.dll[6.0.6000.16512]
  [File mismatch: C:\Windows\system32\winnsi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\dhcpcsvc6.dll[6.0.6000.16512]
  [File mismatch: C:\Windows\system32\gpapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\slc.dll[6.0.6000.16509]
  [File mismatch: C:\Windows\system32\gpsvc.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\sysntfy.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\winsta.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\nlaapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\ncrypt.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\bcrypt.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\mpr.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\credui.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\cryptui.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\wintrust.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\imagehlp.dll[6.0.6000.16470]
  [File mismatch: C:\Windows\system32\dbghelp.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\mssign32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\wininet.dll[7.0.6000.16809]
  [File mismatch: C:\Windows\system32\normaliz.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\iertutil.dll[7.0.6000.16809]
  [File mismatch: C:\Windows\system32\tapi32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\rtutils.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\rasapi32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\rasman.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\rasdlg.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\mprapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\activeds.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\adsldpc.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\atl.dll[3.5.2284.0]
  [File mismatch: C:\Windows\system32\certcli.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\winscard.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\netplwiz.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\urlmon.dll[7.0.6000.16809]
  [File mismatch: C:\Windows\system32\propsys.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\xmllite.dll[1.1.1002.0]
  [File mismatch: C:\Windows\system32\mlang.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\advpack.dll[7.0.6000.16809]
  [File mismatch: C:\Windows\system32\apphelp.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\msiltcfg.dll[4.0.6000.16386]
  [File mismatch: C:\Windows\system32\shunimpl.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\devmgr.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\newdev.dll[6.0.5054.0]
  [File mismatch: C:\Windows\system32\dwmapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\winspool.drv[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\cscapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\uxtheme.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\windowscodecs.dll[6.0.6000.16740]
  [File mismatch: C:\Windows\system32\ntshrui.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\feclient.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\shdocvw.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\browseui.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\imm32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\msctf.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\duser.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\winsxs\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.0.6000.16386_none_9ea0ac9ec96e7127\gdiplus.dll[5.2.6000.16386]
  [File mismatch: C:\Windows\winsxs\amd64_microsoft.windows.gdiplus_6595b64144ccf1df_1.0.6000.16550_none_56f0fd51b4f462f8\gdiplus.dll[hr = 0 x 80070002]
  [File mismatch: C:\Windows\system32\msrating.dll[7.0.6000.16386]
  [File mismatch: C:\Windows\system32\ieframe.dll[7.0.6000.16809]
  [File mismatch: C:\Windows\system32\msi.dll[4.0.6000.16386]
  [File mismatch: C:\Windows\system32\mshtml.dll[7.0.6000.16809]
  [File mismatch: C:\Windows\system32\msls31.dll[3.10.349.0]
  [File mismatch: C:\Windows\winsxs\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.6000.16386_none_87e0cb09378714f1\comctl32.dll[5.82.6000.16386]
  [File mismatch: C:\Windows\winsxs\amd64_microsoft.windows.common-controls_6595b64144ccf1df_5.82.6000.16386_none_40339432230aebeb\comctl32.dll[hr = 0 x 80070002]
  [File mismatch: C:\Windows\system32\comdlg32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\printui.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\cfgmgr32.dll[6.0.6000.16609]
  [File mismatch: C:\Windows\system32\puiapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\hlink.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\imgutil.dll[7.0.6000.16386]
  [File mismatch: C:\Windows\system32\usp10.dll[1.626.6000.16386]
  [File mismatch: C:\Windows\system32\inetcomm.dll[6.0.6000.16669]
  [File mismatch: C:\Windows\system32\msoert2.dll[6.0.6000.16480]
  [File mismatch: C:\Windows\system32\ieui.dll[7.0.6000.16809]
  [File mismatch: C:\Windows\system32\efsadu.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\mfc42u.dll[6.6.8063.0]
  [File mismatch: C:\Windows\system32\odbc32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\oledlg.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\linkinfo.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\query.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\clbcatq.dll[2001.12.6930.16386]
  [File mismatch: C:\Windows\system32\cabinet.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\scecli.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\w32topl.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\rpchttp.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\winhttp.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\fwpuclnt.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\ktmw32.dll[6.0.6000.16386]

  Other data-->
  Office details: {5FC29B42-80DC-4BE3-B5EA-37281853FA7D}1.9.0011.06.0.6000.2.00010300.0.0.002x 32*-*-*-*-44MV389572-OEM-7332166-000212S-1-5-21-3747016915-1105364745-1034703816Hewlett-Packardlaptop Presario V6500 Hewlett-PackardF.2A 20080222000000.000000 + 000A4313507018400EE40090409India Standard Time(GMT+05:30)03HPQOEMSLIC-MPC10310312C0A25836FDBE5ACFmDbcrRY1pTOcrz4ZUZRHhpUuc0 = Microsoft Office Enterprise 2007 89388 726-2958074-6564314100Microsoft Office home and Student 20071219

  Spsys.log Content: U1BMRwEAAAAAAQAABAAAAC58AgAAAAAAYWECADAgAADCBCA/81zKARhDs/4hWdo7Xkl9D+HKpni6Sfv7jmoHEBVqqW/xcrQYytms9RtRtLWsIPXcLJpmwOfDvX0zCybmDilyQLttVIyTRhimAiUiBLOYhz3eEQj3sEGnmR0ReJ9KlWCJouxq6PAIwHwHVMfvNauSbFvmaTCDPKtQZQFIQcDXIAwFGl6D9S/GUDYecePFRKM/leS97bxOVVm9fICZUkfHdDNbo72qUqYYmAlRJO05+WV1r70w2O6Pl99gqTnSYR4j0FashTOQ1ifb1stzrqx+w3WNaAwzkNYn29bLc66sfsN1jWgMM5DWJ9vWy3OurH7DdY1oDDOQ1ifb1stzrqx+w3WNaAw=

  License data-->
  The software licensing service version: 6.0.6000.16509
  Name: Windows Vista HomeBasic edition
  Description: operating system Windows - Vista, channel OEM_SLP
  Activation ID: 199086aa-6cb8-4e5b-b698-f2be56f1e8ee
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 89572-00146-321-600021-02-16393-6000.0000-0492008
  Installation ID: 234075993312598255872244522405847072649516093605215141
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkId=57201
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkId=57203
  Use license URL: http://go.microsoft.com/fwlink/?LinkId=57205
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkId=57204
  Partial product key: 44MV3
  License status: licensed

  --> HWID data
  Current Hash HWID: QAAAAAEABwABAAIAAgABAAAAAwABAAEAnJ9ERYTHdhu84yC + gASIzAaYmGC6ZEQsznDy9J4v6lrYfiqsrFZ4qg is

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC APIC PTLTD
  FACP NVIDIA MCP67-M
  SRAT AMD HAMMER
  HPET PTLTD HPETTBL
  START PTLTD $SBFTBL$
  MCFG MCFG PTLTD
  TCPA Phoenix x
  SSDT PTLTD POWERNOW
  SLIC SLIC-MPC HPQOEM

  Thank God!

  Finally, I worked it out myself. But it's painful to watch than virtually any other that Uday has responded to my problem. Something I've been waiting for so eagerly.

  I applied my common sense and defragmented the dirives then sfc/scannow, and it worked. Cryptographic Services said when I began to log in as network account. So my problem is solved. Now, windows update works fine.

  Interestingly, Microsoft Fix it, says it cannot start the Cryptographic Services. Are God, while the _____ you supposed to difficulty? It made Internet Explorer icon on my desktop and other places.

• computer does not start message "autochk.exe not found" followed of "stop: c000021a (fatal system error.

  computer does not start.

  the screen message is: "autochk.exe not found."

  second message is: "stop: c000021a (fatal system error)".

  «the session Manager initialization process ended unexpectedly with the State 0xc00003a (0x00000000 0x00000000).»

  "the system is stopped.

  Hi Bobzurcher,

  ·         Did you do changes on the computer before the show?

  I suggest you to consult the article in the Microsoft Knowledge Base and check.

   

  How to solve an error "STOP 0xC000021A.

  http://support.Microsoft.com/kb/156669

  Let us know if that helps.

• Windows 7 Enterprise does not start successfully after re - install

  I have just reinstalled Windows 7 Enterprise 32-bit with SP1 on my laptop HP 6715 b. (I use 32 bits for any software that I develop is always compatible 32-bit.)

  After you have re-installed however, it does not start correctly. What came with windows announce "Starting Windows", but the following animation never - start the four lights that turn and turn into the "Flying Windows Icon.  It then crashes right there - do nothing, no matter how long wait.

  If I can put the machine power off and re - start, we are at the "Windows Recovery screen" - because it has not started correctly the last time.  From there, I can choose to make a recovery and return to the last Point of good restoration, i.e. on a freshly installed system before the update of Windows, of course.

  If I select "Start Windows normally", it starts however. But it is not 'Normal '. For example I can't finish my "Windows Easy Transfer".  It says that it cannot connect to my domain name - even if I am connected to my area and have been using it to install other software.

  Or I can do a Windows Update "normally". The last time I tried, it is gone for hours without finding what be - so I left it overnight. In the morning he had apparently found nothing yet.  However when I turned off the machine and then turn it again - he told me there are 211 updates installed.  WHO has literally all day.

  I'm not happy to come back to the last good Restore Point.  I did once.  He has NOT fixed the problem.

  I also tried:

  • Using MSCONFIG to disable all the startup and Services, apart from Microsoft and Kaspersky - no improvement.
  • Do a CHKDSK - revealed nothing.
  • Start in Safe Mode, did change his behavior.  This time I do not have the Herald "Starting Windows".  But turn the machine works again once, return me the 'Windows Recovery screen '.

  Ideas anyone? I'm at my wits end.

  It's OK guys.  I have it sussed.

  He was objecting to the fact that I had my USB with my "Windows Easy Transfer" files on it, plugged during the initialization of the system.

  Also, I was wrong in my thinking on how "Windows Error Recovery".  I assumed that he would do all that it checks before proposing to do a system restore.  It is not, it suggests a restore of the system first.  If you say NO to that, then he makes his audit.

  What is finally here, is that I finally chose an option before he went into the system recovery.  Then, I waited until he was asked to do a system restore.  I said NO, so he went in it checks.  He went through his analysis and finally concluded it was some "system unspecified device" recently added.

  Well I haven't nothing added to my machine for years.  So, I was puzzled.  Then I thought ' well, I don't normally have my key USB is plugged. "  I wonder... ».  I therefore disconnected the USB drive and rebooted the machine.  The rest they say is history.

  Hope this sorry tale helps someone else.  It just cost me four days!

• Cisco DME 1100 does not start

  Hello

  We have 1100 DME of Cisco, which does not initialize.

  He started by Frost, one or two times, at which point I restarted, he had that work, but now the unit does not start. If I put power on and toggle the State the LCD lights with information indicating 'Boot'... "but going just no where. If I connect a monitor, it displays nothing also, although he constantly made a beep tone...

  Is there anything I can try to reset the device or what it could mean?

  The last time that I had any image of the display unit, it had the following information:

  "Windows was not start because the following file is missing or damaged:

  C:\windows\system32\config\system"- this can only be bad...

  Thank you

  OK, so after some research, we found that the DME running Windows Embedded as its operating system.

  We managed to get a copy of the operating system and made a windows repair using an external USB DVD drive.

  The DME is now back operational.

• WebLogic does not start

  Hello

  I tried to integrate DRM and EPMA. And I have been setting up of keys for the protection of messages. I created the file of keys 'EPMKeystore.jks' in D:\Oracle\Middleware\user_projects\domains\EPMSystem\config\fmwconfig. I connected to the business manager and tried to configure the security provider. I have provided the path to the keystore comme./EPMKeystore.jks and specified passwords. Also implemented the key Signature and encryption as "HyperionEPMKey" and the passwords entered. I tried to restart weblogic. It does not start now. Yet the Hyperion services do not start. The adminserver.log error is

  # < 22 may 2015 10:06:50 PM PDT > < critical > < WebLogicServer > < N01APW281 > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1432339610519 > < BEA-000386 > < server subsystem failed. Reason: weblogic.security.SecurityInitializationException: loading of the OPSS java security policy provider failed because of the exception, see exception stack trace or the root server log file. If still don't see no obvious cause, turn on debugging of the flag - Djava.security.debug = jpspolicy for more information. Error message: JPS-06513: cannot save the keystore. Reason

  weblogic.security.SecurityInitializationException: loading of the OPSS java security policy provider failed because of the exception, see exception stack trace or the root server log file. If still don't see no obvious cause, turn on debugging of the flag - Djava.security.debug = jpspolicy for more information. Error message: JPS-06513: cannot save the keystore. Reason

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1402)

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)

  at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)

  at weblogic.security.SecurityService.start(SecurityService.java:141)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Caused by: oracle.security.jps.JpsRuntimeException: JPS-06513: cannot save the keystore. Reason

  to oracle.security.jps.internal.policystore.PolicyDelegationController. < init > (PolicyDelegationController.java:167)

  to oracle.security.jps.internal.policystore.JavaPolicyProvider. < init > (JavaPolicyProvider.java:369)

  at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)

  at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)

  at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)

  at java.lang.reflect.Constructor.newInstance(Constructor.java:513)

  at java.lang.Class.newInstance0(Class.java:355)

  at java.lang.Class.newInstance(Class.java:308)

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1343)

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1024)

  at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:879)

  at weblogic.security.SecurityService.start(SecurityService.java:141)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Kind regards

  Brig

  Also, search all other references to "keystore.inst.0" in this file and

  delete, I think that there is a serviceInstanceRef line that references that

  block config.

• VMWare Virtual Center Server does not start after Windows Update

  Help!  I'm under vCenter 5.1 on Windows 2008 R2 with SQL Server 2008 R2 Standard.  I have applied the latest updates for Windows (critical only) as it applied Service Pack 3 to SQL 2008 R2.

  Now the vCenter Service does not start.  It generates error 7024 in the Windows system log:

  The VMware VirtualCenter Server service stopped with the error special service that the system cannot find the specified file...

  and error 1000 in the Windows application log:

  Could not initialize the VMware VirtualCenter. Closing...

  PS - I confirmed that the SQL instance is running.

  Absolutely nothing has been done except the Windows and SQL updates.  Everything worked fine until this point.  Ko an article deals with a "space" condition, but there are a lot of available space.

  I have attached the file vpxd.log, he created.

  Clues?

  Thank you.

  OK it turns out that the WWW service is interfering with vCenter Service on Port 80.  The thing is that the WWW service has been set to manual start.  Somehow during the upgrade Windows or SQL, one of them decided to turn auto-start. After the reboot, the conflict occurred.  Once I put the WWW back service to manual start the vCenter service started OK.