Satellite A660-186 does not start when the USB nano-receiver is connected

Similar Questions

• Satellite C660-108 does not start if the USB Bluetooth dongle connected

  Hiya,

  I hope you could help me.

  I'm having a problem with my dongle bluetooth and satellite c660-108.
  It all works perfectly. It connects devices via bluetooth and I can do whatever I want.

  But then when I'm mobile stop and turn it on again it will go if the bluetooth dongle is always in the USB.

  I see Toshiba screen and then it hangs with a black screen and a cursor flashing at the top left.
  I have to turn it off, remove the bluetooth dongle and then turn it back on.
  And then windows starts. After that, I put in bluetooth dongle, once again I want to work with her.

  It isn't a huge problem, but it is a bit annoying when I have to leave the bluetooth and put it back again to get the windows began.
  I'm running under win 8.1 but he already had with 8 victory.

  Anyone any ideas?

  > I see Toshiba screen and then it hangs with a black screen and a cursor flashing at the top left.
  Especially the blinking cursor is displayed because the laptop can not find a boot device.

  It seems that the device cannot put on the HARD drive while the USB dongle is connected.
  I would recommend you check the boot order in the BIOS.

  Put the HARD drive in the first place and the USB boot last device.
  Save changes and check if it helps.

• Satellite L30-115: does not start when external keyboard and mouse are connected

  My Satellite L30-115 starts when my external keyboard and mouse are connected to PS2 USB adapter.

  Everything is OK, when they are not connected, and they work fine when they are connected after boot.

  Someone has any idea how to solve this problem?

  Hello

  I don't think there is a way to solve this problem. Also, I assume it is the related issue of the BIOS. Is perhaps the time to be up-to-date and use new and compatible equipment. ;)

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• Satellite A660 - Webcam does not work when using Skype

  I recently bought a Satellite A660-15J. I am running Windows 7 64 bit.

  I have the latest version of Skype (5.3.0.111).

  The integrated Webcam does not work when you run Skype. If I run the Toshiba Web Camera Application the webcam works fine. However, when I test it in Skype, I get a message saying "cannot start video. Try quitting other programs that use the webcam '.

  However, as far as I can tell there no other programs available. I have tried Skype with the Web Camera Application clised & open. I also confirmed that I do run the latest version of the program.

  One of the main reasons we have this laptop is to use Skype video... Help, please.

  Disable webcam application start-up and exit this application before you start Skype.

  I used Skype many different models of laptops, including friends A660 and it worked correctly.

  When you open Skype video settings is listed as default camera USB webcam?

• Satellite A30 161 does not work when the battery is installed

  Hello

  I have a problem with my Satellite A30-161. The laptop works perfectly without the battery installed. With the battery installed and the AC adapter plugged the power supply and battery (light orange) are turned on.

  When turn on/off, as soon as WXP loaded the battery light turns off and the laptop turns off. With battery only laptop does not start. There is no dirt on the heat sink and it doesn't seem to be a problem with the connector DC and power lights still on.

  Any ideas?

  Hello

  This behavior is not easy to give an accurate diagnosis, but according to your description, I assume that there is a problem of electronic power supply. Just using special diagnostic tool, it is possible to check if there is a problem serious.

  To be honest, I don't think you can do it alone. The only thing you can try is to test it with new battery. Maybe you should contact the service authorized in your country. talk with them and you will see what they say.

• Satellite 1800-814 does not start if the power adapter is plugged

  Hello
  I have a problem with my 3 year old, 1800-814.
  It all started with the sudden Windows crashes. He ran sometimes smooth, sometimes he just hung up. So I decided to reinstall the laptop. My problem is when it is plugged by pressing the power on button does not start the laptop. Just the green light is on nothing else happens. Sometimes it starts after a wait of 3 or 5 seconds. On battery it starts every time. What can I do? A defect material or just dust somewhere?

  Thank you

  Jens Grieger

  Hello

  It could also be something wrong with the electronic power supply on the motherboard.
  It s is not possible for the user to fix it. In such cases, the best way is to contact Toshiba service in your country.

• Satellite Pro 460 does not start with the new drive in

  I recently received a Satellite Pro 460, but he had no hard drive.
  It starts great without a disc in but as soon as I put a new hard drive in it does not start.

  I thought that it might be again a hard drive, so I pulled out my old Toshiba Satellite with my old drive to work, and yet, it does not start.

  Someone has any ideas why this is and what I can do about it

  I think that you can not do much. Satellite pro 460 CDT, for example, comes with 2 GB of HARD drive. If you try to get it work with similar HDD without success, it may be defective IDE port on the motherboard.

  What HARD drive you are trying to use on this good old classic?

• Re: Computer laptop Qosmio F15 does not start when the Start button / stop is pressed

  My Toshiba Qosmio f15-av201 does not turn when you push the power button, even if the lights of ac adapter & battery are both on (on). Indeed, the yellow light that is supposed to turn on the power button when the laptop is turned off does not appear. In addition, there is no sign that shows the laptop tries to start when the button is pressed, not even a peep. The laptop was recently dismantled (open) to clean the fans, who made the famous monstrous noise which toshiba qosmios are apparently well known for.
  Everything seems to be connected correctly in its correct place. Nothing seems to be damaged. So, I have no idea where I can get out of here. Pending issue.

  Help will be less appreciated.
  Thank you

  The same question again?

  Why you can't finish under http://forums.computers.toshiba-europe.com/forums//message.jspa?messageID=126963? To start the new thread new will help a lot.

• Satellite A30 does not start with the USB device connected at boot time

  Hello

  I have a Satellite A30 and sometimes it does not start.
  After turning on, not even the BIOS starts.
  even if sometimes the BIOS starts, but the OS does not load.

  I figured out that its related to USB devices connected at boot time.
  If no USB devices are connected, it starts without a problem.
  Even if the start-up is suspended, as soon as you unplug start it BIOS USB devices.
  Its ok to connect USB devices later, once the system has started.
  I disabled "removable devices boot" and "network startup."
  just in case, but it makes no difference.

  BIOS is version the most recent (1.70) and it comes up with all kinds of USB devices.
  printer, mouse and (self-powered) external USB hard disk.

  Is this a known issue?
  There is no known workaround solution?

  Hello

  I put t know why this happens, but it has to do with the BIOS.
  The same thing happened on my old laptop. I couldn't start my unit while the USB printer has been turned on and connected.
  The only solution is to disconnect the external USB device during the boot process.

  RSY you should check if the order of boot in the BIOS has been on the HARD drive first.

• Satellite L500-1TC - does not start and the screen stays black

  Hello

  I have a Toshiba Satellite L500-1TC and since yesterday it no longer starts.
  The picture freezes and it restarted. Given that I can push the power button on my laptop and the LED indicates that it is on, but the screen remains black.
  No idea what I can do?
  The warranty is still active, so can I send it to Toshiba?
  Kind regards
  Sven
  (Sorry for my bad English)

  Hey Buddy,

  What you can try before you contact Toshiba official service is the following:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

  If it doesn t work it seems to be a hardware problem, then contact an authorized service provider. If your laptop is under warranty, the repair is free :)

• Satellite U300-13U does not start and the recovery disc fails to too much work

  Hi all

  I have the above computer (or should I say my wife) & it is nothing that a good pain since the first day we got it.
  I have had it about 2 years & had to reformat the HD at least 6-8 times using the product recovery disc as laptop starts.
  The laptop runs Vista.

  In any case, problem I have now is that new laptop does not start, but for some reason any product recovery disc also does not work...
  What I can do...

  I have read on various forums that it might work if I reformat the HD first using some s/w on a bootable CD but how / what S/W can I use...?
  The laptop has a SATA HD 160 GB installed. How can I check that it all works.
  I don't know if the current problem is S/W or related material...

  Toshiba has a utility that I can use...?

  Thanks a lot for all the help...

  John

  Hello

  What happened exactly?
  Do you receive error messages by using the recovery disk?

  Check if the HARD drive is OK! You can check in the BIOS.
  If the HARD drive is listed in the BIOS then the HARD drive and HARD drive found BIOS is not dead.

  Usually, you might start Notepad with the help of a Live disc for example Bart PE
  It s a bootable windows CD/DVD live

  http://www.nu2.nu/pebuilder/

  This can allows you to format the HARD disk, and then use the recovery disc!

• Satellite 1800-712 does not start with the new HARD drive

  Hello world.

  I am currently trying to install a new HARD drive in my notebook of 1800-712.
  I'm having a few trubbles as my Satellite won't start with my new HARD drive.

  I upgraded my BIOS to the latest version.
  The new HARD drive is a 40 GB Samsung.

  Any suggestions on what I need to do to make it all works?

  THX, Philippe

  Hello

  This device was shipped with 20 GB HARD drive.
  You again is 40 GB.
  I guess that the BIOS does not recognize the HARD drive because of the size.

• Satellite P205: Touchpad does not work when the new adapter is connected

  I got a replacement charger for my Satellite P205 but put it has A 4.19 instead of 3. 95 has, they said that it didn't matter, but since I use the charger, I have the following problems:

  -Does not load properly and turns off after an hour.
  -The touchpad has a mind of its own when the charger is connected (windows opens if hovering over button, through the screan jumps when I try to move it, freezes and disappears)
  -Charger Word to say the laptop plugged in but not charging

  What can I do to remedy these problems, the laptop works perfectly when the charger is not plugged in?

  See you soon!

  Hello

  I guess that the touchpad worked correctly in the past with the former sector adapter.
  Is this good?

  Well, it seems that these questions are related to the new power adapter and I would recommend using a 100% compatible adapter.

  Check the AC adapter s old part number and if the issues could be resolved using this adapter.

• Satellite 1800-814 does not start after the installation of the software

  Hello
  If I pass on my old Satellite S1800-814, it seems to start correctly: it shows the symbol of "Toshiba", then "Windows XP loading", then the screen goes completely blank, followed by a black screen showing the cursor that I am able to move. The hard drive continues to hum as usual for a few seconds, but then begins to repeat a series of clicking noises, somewhat like a disk that is stuck. The boot process is not still engaged.

  Here's the context: I installed my (old) version of Avid Xpress Pro editing software on my Satellite 1800-814. I managed to install a newer version, even if it does not function effectively, where my attempt to install an older version more closely adapted to the processing speed and the size of the RAM 1800-814. I got the usual warning at the end of the installation program of Avid saying that Windows can be affected if I let the installation ends in letting the computer on. But I pressed the option "continue anyway" (as I've done it before without negative effects). The computer off, but he came in as described above. Please tell me what I broke. Can I ever solve this?

  Thanks for your help.

  Hello

  Try to start your computer in safe MODE and try to remove preinstalled software. Please report the results.