Initializing

Similar Questions

• Initial backup, Time Capsule will not end.

  I recently started to use my Time Capsule to back up my early 2014 MBA 13 '' again. However the initial backup will never end. The TC is not used as a Wi - Fi router; It is connected to the existing wireless network.

  When I started having this problem initially. I erased the disc TC and more fresh and Time Machine, under System Prefs, told me that the backup has been chugging along just great. Well... now, after he had all of August to reach the end of time Machine always shows me "waiting for full first backup."

  If I choose "save now" widget menu bar or if I let the system restart automatically backups TM shows Control Panel "backup x of x, XX, XX" and the second number continues to increase. The backup will never end.

  I searched the Ko of Apple and these discussion forums and not found the answer. What can I do to make this backup finish?

  TIA.

  The TC is not used as a Wi - Fi router; It is connected to the existing wireless network.

  And that's probably the problem, because Apple does not officially support backups Time Machine to TB unless you use the wireless TC, or connect the Mac directly on the TC using a wired Ethernet cable connection.

  Things can work with your existing wireless network, but it will be no help if it is not. Sometimes in situations like this, a Mac will back up OK wireless, and another Mac will have problems.

  As you try to add 'new' backups 'old' backup, Time Machine can also have issues with this, try to compare the old and new files and get confused about what to keep and do not keep. In this case, the recommended solution would be to delete older backups of the MBA and then start again and try a new backup.

  Wireless is never recommended for a first full backup. It's OK to use it, then much smaller incremental backups.

  If you try this course the existing wireless you have and still have questions, other than to try to save on the wireless TC, on the only other option to try would be to connect the MBA directly to one of the LAN port <>- on the back of the TC using an Ethernet cable.  Since you have an MBA, who does not have an Ethernet port, you can buy a bolt of lightning for the Ethernet card.  Maid in Gigabit Ethernet Adapter - Apple

• What has been the recent initial risk security involving Javascript in Firefox?

  What has been the recent initial risk security involving Javascript in Firefox? I downloaded the suggested "No Script" to be able to allow or forbid scripts on Web sites. However, it gets a little frustrating when waiting for pages to download, then realize that I have to enable them. I really need to make it longer?

  JavaScript is not any security risk known that have not been resolved in recent versions of Firefox. You are thinking maybe Java, which is full of known security holes and should be turned off, but is not related to the Javascript in any way.

• should my time capsule be connected with a cable for backups, after the initial installation?

  should my time capsule be connected with a cable for backups, after the initial installation?

  If you mean that you have to keep your Mac connected to a Time Capsule via Ethernet for future backups, then the answer is no. Time Machine and time Capsule are designed to work over wireless for your Mac would just need to be connected to the wireless network provided by the time Capsule.

• E-mail suddenly is seen in initial popup but is not in the Inbox

  I very well - received email in my Thunderbird inbox - this morning. But now, suddenly, from about 14:30, I'll see an email in Thunderbird - seeing this little window that briefly previews the e-mail message - but then when I go into my Inbox to find this email, it is not there! I did a test and it's the same thing... I see it in the popup as a first step, but then there is in my Inbox. I thought initially perhaps it was showing in a weird situation in my Inbox, because of this business of wire that I don't understand, but when I do a search for email which is theoretically, I'm not. Any ideas welcome!

  Oops, never mind - I answered my own question! My incoming e-mails disappear simply - they were filtering in my mailbox a that has a filter set up to bring certain e-mail inside. I don't know why the emails (all? some, not sure) would all of a sudden there, but now I removed the filter and box the letters that the emails were suddenly get deflected in, and now the e-mails seem to come very well... At least my test for me e-mail now goes into my Inbox as expected. If there's a software glitch behind what happened, it would be wise to consider the issue.

• IPad 12.7 froze on the initial commissioning - updated

  Hi my Ipad froze on the initial update after the start of 9.2 to 9.3.2.

  Subsequent attempts have failed and an error 53 rises.

  When the Ipad is not connected I only connect to itunes prompt & he can't go down the Restore screen

  Tried several different things with no luck

  Hello.

  Press the sleep/wake and home buttons and keep them for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Initially Web pages load very slowly, but are a lot faster if I stop and reload the page

  Whenever I have initially load ANY page of a Web site, the first page really takes a lot of time to load. All pages of this site is loading very quickly thereafter. I also noticed that if I stop the loading of the page, immediately after my first click and then click on reload, the page loads almost instantly. I am currently using Firefox 20.0.1, but this problem has occurred for a while... at least as far as Firefox 19. According to my research, I've tried a bunch of suggested solutions, but nothing helps... including: off hardware acceleration, don't select any proxy, disabled ABP, etc.. Any other suggestions would be greatly appreciated. Thank you!

  Hello stw203, maybe try to reset all the related settings in your network configuration. enter Subject: config in the bar firefox address (confirm the message information where it appears) & are looking for any preference, starting with the network in bold (= set of users) - do a right click and put these entries to their default value.

• After the initial setup time machine should be hard wired to the modem

  Should time machine be hard wired to the modem after initial installation

  Yes, if it must be used in its default configuration as a router DHCP network and all clients need to connect to the World Wide Web.

• When and how can you synchronize browsers of two computers on the same account after the initial installation?

  I can't find any instructions on how to synchronize Firefox browsing data after the initial configuration is completed and the account is established. Everything that help guard reference section to be put in place, but not how to perform the synchronization operation after installation.

  Firefox syncs automatically, but you can force a synchronization by going to the Tools menu, and then click Synchronize now.

• Satellite T130 - stuck on the initial Toshiba screen (Bios)

  Hello

  I got a T130 and recently tried to start with a key USB - but I have not even that far--basically since trying to press F12 to access the boot options it will not go passed the initial Toshiba screen.

  I tried to turn off, remove the battery/AC etc. When you press F2 it said entering the facility, but nothing has happened - I also replaced RAM memory modules.

  Any ideas?

  Thank you

  Maybe the BIOS is screwed up. I mean that if you are not able to enter, it may be BIOS problem.
  You have defective or what?

• Foxfire is the screen to the right when it is initialized

  Once initialized, Foxfire are off the screen to the right. What can I do to fix this?

  Upgrade your browser Firefox 8 and check

  • getfirefox.com

• Sorry, scanner could not be initialized. (Scanner not found.)

  I use Mac OS X version 10.9.2 and HP all in one Officejet J6480.  The all-in-one is able to print but not scan.  Here is the error message.    None of your above worked for me.  Either you are the reference to a different version of the operating system Mac or another HP printer.  What would you recommend for my Mac and a printer?  Thank you.

  Sorry, scanner could not be initialized.
  (Scanner not found.)

  Hi JeanneDave,

  Thank you for visiting the Forums from the HP Support! I understand since the upgrade of the OS to 10.9 Mavericks you get an error "sorry scanner could not be initialized" with your HP Officejet J6480. After some research, there is no complete abailable features of software and drivers for the J6480 JO, that said that the printer would have been installed using the Apple updates. To get a better understanding of take a look below:

  V10.9 OS X Mavericks: installing and using the printer on a Mac

  Now, that being said, this means not you will not be able to scan just average there are a few different options, then you can use to see here to learn how to scan with or without HP software: how Scan: OS X v10.9

  I hope this helps!

  Thanks again,

• When I start my online banking, the options do not load. I get a message that the applet is not started because it has not been initialized (I think it has to do with Java). What should I do?

  I go on my site of the Fund and go to my accounts. And I can get into my account. But the menu that allows you, among other things, go to the online banking is not. Keep it from the page it says "start applet" and then immediately "uninitialized applet." How as it initialized? I think, but am not really sure that it has something to do with Java.

  To see if you need an update to the Java plugin, see the Oracle here test page:

  http://www.Java.com/en/download/testjava.jsp

  Who help me?

• Satellite Pro L650 - hard disk is not initialized.

  Hello

  I have a Toshiba Satellite Pro L650 and I am having some problems.

  It all started a few weeks ago, I received the dreaded screen black death (windows could start, but then just came up with a black screen and a cursor. After playing well, I thought that a reinstall of windows would do the trick.

  It worked, but none of my pilots have been installed... After much research, I found my Toshiba repair disc. I put in and went to fix it. At half way through formatting the drive, it came with an error, saying that he was unable to delete a specific file, it asked me to reset.

  So I reset, and it came with a screen with "this disc is not initialized, Please initialize now."
  So I pressed Yes, and it resets, it came with the same screen. and again and again.

  So that's where I am. It is only a year old, and already got the replaced disk. I'm desperate difficulty, I don't want it to become a grammage of paper-dear...

  First of all I m wondering why the message appeared saying that the disk is not initialized have you used the Toshiba restore for the OS installation disc or have you used any other Windows disc?

  On the other hand, it might be possible that your HARD drive is malfunctioning, the cursor blinking in the upper left corner is a sign for this fault
  So I recommend you to check the HARD drive. Use a tool like Drive Fitness Test, for example, it helps you to check the HARD disk
  If errors will be displayed so the HARD drive needs to be replaced

• Initial start-up does not not on the new Satellite L750 Pro

  I recently bought a new laptop of Toshiba Satellite L750 Pro. I connected on AC power and the laptop. The statement said initial start-up can take up to 2.5 hours, however, it has been more than 8 hours and nothing has changed. Also the screen is not that fake black used when the screen is turned on, it is 'off' black.

  Help, please.

  Try to start the installation program once more.
  Turn on the laptop, press F8, choose repair my computer and choose HARD drive recovery.
  Usually the installation of recovery should start once more and needs to be reinstalled the Windows operating system

• If I want to sell my iPhone, and I restore it, the buyer will never know that I had initialized before?

  If I want to sell my iPhone, and I restore it, the buyer will never know that I had initialized before?

  It will be clean, if you go to settings > reset > erase content and settings