Ink system has no error: Oxc18a0101 on photosmart D7160

Similar Questions

• Maintains C7280 ink system failure 0xc19a0035 error... Help!

  Hello, I've owned this printer c7280 for three years. Lately, my printer has received periodic errors preventing any impression until I have shut down and restart. The error message reads:

  Ink system has failed. Cannot copy, receive faxes or print. Refer to the printer documentation.

  Error: 0xc19a0035

  Stop the power, then on again.

  When I reboot, printers works fine for anywhere between a few minutes to an hour before this same message back to the top. Sometimes, when the printer is not used at all, it suddenly shows error message. The moment that I think is random. Other times, when I try to print from my computer, the error message appears on the printer. I am still able to print pages, but I have to restart the printer if the error appears.

  How can I fix it? Any help will be greatly appreciated!

  Here is a link that will help you on "ink system failure".
  http://goo.GL/V2qlP

• HP Officejet Pro X476dw. Message: problem with the printer or ink system. 0xc6fd0213 error code

  HP Officejet Pro X476dw purchased June 2013.  Windows xp operating system.

  Printer does not.  In a "print order" function, by modem or button copy to printer, gives me the error message: the printer failed.  There is a problem with the printer or the ink system.  0xc6fd0213 error code.

  Sometimes spits out a blank sheet of paper.

  Hi people, as @Bryan_P has said - Please contact the HP support by phone on this error message. The below listed phone numbers...

  http://welcome.HP.com/country/us/en/wwcontact_us.html

  Can you please post back to let us know how you go?

  Thanks, Ciara

• the system failure 0xc18a0206 error ink photosmart 3210Options

  Get 'ink system failure' with error code 0xc18a0206 on the front of the HP Photosmart 3210.  Black and yellow cartridges are full, while the other cartridges are low on ink.  I tried reset with hosting help and OK buttons and that doing nothing. Any help would be appreciated. Thank you.

  Reboot the system by pressing the buttons OK, Cancel, black and color down at the same time and turn the printer off.

  Keep hold the buttons until the printer stops and back on the tour.

  The system needs to self calibrate now (it may take 5-10 minutes - do not interrupt)

  After the printer has been silent for a few minutes to complete try printing a page.

• Photosmart C7280 All in One Printer, Error Message - ink system failure

  Hi, I have above named printer with an ink system 0xc18a0406 failure Error Message.

  The Printerhead cannot be taken out for cleaning, because there is no leverage. Please can you help me?

  Thank you, Cynthia

  This might help you:

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/do-you-have-an-ink-system-failure-0xC-error-message/TD-p/740567

• Failure ink system - error 0xc18a0206

  I have a HP PhotoSmart C7250 all-in-one that has the error:

  Ink system failure

  Ink system has failed.  Cannot copy, receive faxes. or print.  Refer to the printer documentation.  Error 0xc18a0206. Stop the power, then on again.

  I was not able to locate this error in any manual or on the website of HP.  I found similar ones involving different printers and cartridges.

  I tried several scenarios to powering off the printer, unplug the power and remove the cartridges, but nothing works.  I noticed that the cartridges have dates that are in the past.  Before you go out and buy a new set of ink cartridges, I would like to know if this is a possible solution to the problem.  They are all new (just open the packaging) but more than one year after the date on them.  I don't want to buy a complete set of cartridges, so I'll have to replace the printer (who knows what cartridges will take a new printer).  After all, the cost of the cartridges, it would be a good part of the cost of a new unit.

  Hello!

  A few months back, I did a collection of solution for this problem. He helped resolved much ink system failures up to that date. You can check it out.

  http://www.out-of-warranty.com/ink-system-failure-error-0xc18a-HP/

• HP C5180 Photosmart - ink system failure

  I have a 13 month old Photosmart C5180 HP which is now displaying the following error message, "ink system has failed. Unable to print... "Error: Oxc18a0506.

  The help message suggests "put off, then on again.  This does not clear the fault.  I followed a number of other subjects with similar-sounding problems and have tried all the suggested solutions, including resets, cleaning of printheads, removing each print cartridge and cleaning them, withdrawal and the replacement of the power lead while now the OK and help buttons.  None of them have allowed the problem.  Before I get what many have described as less useful and expensive, line of HP support I was wondering if anyone else has had and solved, this error.

  I hope this helps someone out there:

  Reset:

  • Unplug the printer, then pressing the help and ok button branch simultaneously in. This sorting it.

  Have to say it looked like all this process exhausted shed loads of ink, so by the time I had finished I had to replace the 3 cartons!

• My HP printer has an ink system failure, what can I do to fix this?

  Hello

  I'll do a tutorial on how to solve the error message ink system failure.

  Now, in general this error can occur when the ink cartridges are bad, the printhead is damaged or the sensors are indicating that the ink system has failed to the printer.

  

  Step 1:

  The first step we take with an ink system failure problem is a hard reset with the printer. A hard reset Resets the sensors inside the unit causing the sensors reading if the print head or ink cartridges are healthy or not.

  Hard Reset:

  Unplug the power cord from the printer and the wall

  Wait for 30 seconds

  Plug the power cord into the printer, and then on the wall (do not plug power cord into a surge protector)

  
  Step 2:

  Now, if the hard reset doesn't fix the problem there are a few available documents to follow which will guide you through a few steps to try to resolve the printer.

  I will list a couple of them here:

  If your printer does not appear please go to HP support and drivers and search for your printer and your document.

  Photosmart C7280

  OfficeJet Pro 8600

  OfficeJet 6500 Wireless

  Step 3:

  If none of these documents allows to solve the issue, I would call HP @8004746836. They should be able to help you replace or repair the unit. This could result in the replacement of the printhead, if so please be aware that if you are out of warranty, it will cost you.

  Remember if you find one of my post useful or want to say thanks don't forget to click the White Star under my name to give me congratulations.
  I really appreciate it!

  Thank you!

  I hope it's useful!

  Remember if you find one of my post useful or want to say thanks don't forget to click the White Star under my name to give me congratulations.
  I really appreciate it!

  Thank you!

• Photosmart 3310 ink system failure

  My printer is about 2 years old and I got a 'Ink system failure' report, error 0xc18a0305. I did the 4 steps that HP told me to do (unplug, restart it, etc...) but still nothing. Someone at - it ideas? If she ever needs service, who can I call? Help.

  Thank you

  My HP Photosmart gave me the same error even if the first error was a mistake of carriage return.  It has no jam or carriage jam.  After clearing this error, I received a second error.

  Ink system failure.  Oxc18a0001.  I tried to reset the printer several times using the OK, cancel, black, color button.  It does not clear the error the first two times I tried the reset.  I removed all the ink cartridges and I discovered that one of the ink cartridges is empty despite the ink gauge, saying it was full.

  I replaced the empty ink cartridge and reset the printer.  It worked.  Then failed because a different ink cartridge is low on ink.  By replacing the second ink cartridge and reset that the printer again seems to solve the problem.

• Error: The Oxc18a0206 ink system failure

  Photosmart 3310 all-in-one gets this error when I try to print or to do something. "Ink system has failed. Cannot copy, receive faxes or print. "Error: Oxc18a0206. I reinstalled my printer, replaced all the cartridges, restart, unplug all cables, etc. nothing works. At one point he said transport also jam. I found nothing in the car, but also do not know if I know what I'm looking for. Any suggestions? Thank you

  The solution to organize the buttons OK and cancel has worked for me.  I had to restart a service

  couple of times, but he finally came without the error.

• I got the error message of 18a 021 ink system failure.

  Photosmart D7160

  Windows XP

  Error: 18 failure ink system has 021

  Stopping and restarting didn't help

  Here is a link that can help you with your problem. I know it says 'Ink cartridge problem', but the steps are really the same.
  http://goo.GL/AEYvr

  Print head problem went wrong in the printer or needs to be cleaned.

• HP officejet 7612: "There is a problem with the printer or ink system". That is the message, no error code.

  "Is there a problem with the printer or the ink system". The error message. Without error code. Original cartridges.

  HP has a center of service to Puerto Rico, where I live?

  Please tell me there is a solution for this problem.

  In the paper here troubleshooting steps can help resolve the printer ink system message justify Officejet 7612.

• Photosmart 3210 All printer ink system failure

  Printer will not print scan or copy.  I get ink system has failed.  Cannot copy.  receive faxes or print.  refer to the printer documentation.  error: 0xc18a0001.

  I found this in another forum, and that's what worked for me. I'm posting because wasting time looking for a solution was worth to sign up to this forum and I hope that save others wasting their time to.

  Re: ink system failure Solution of jamest601 (09/09/11 04:00) reply + / -

   

• Fixed HP D7360 0xc18a0001 ink system failure

  0xc18a0001 ink system failure D7360 HP fixed I'm DELIGHTED to say thank you! I believed in my chest, either disconnect OR remove the battery Board would solve my problem. Of course, the first worked, and I didn't have to pull the battery. I had to struggle with learning to take off the cover - they make it like fort knox - but once-it was simple and direct. Thank you. Has not been printed yet - but I don't know it will be. I would like to send some money to paypal for you. I'm not rich, but I have said repeatedly I'd pay on this site, if someone could fix it really. You did it. [I did well - but tell me how!]. contact me however this site allows you to disseminate this - point to this post if need be and have them send me your paypal email or leave this site to accept for you if it works like that. Thanks again. Jerry of peace for others to know what I have done - I just got this HP D7360 - worked perfectly, but a cartridge is empty. I jumped out and filled it and popped it in and it has been a nightmare since! Error ink system. Nothing worked - HP told me for the junk food she - repairman says that it would cost me more just to buy a remanufactured... I knew that I didn't 'break '! HP could not care less... They easily could have told me how to solve this problem with the amount of time that they me lost w on the line. So simple. Fixed HP D7360 0xc18a0001 ink system failure

  Fix your HP Photosmart D7360 (Reset Code/Master) *.

  1 - turn off the power and unplug it from the power source.
  2 - open right side of the printer (looking at the front).
  3 - Cut, gently, pulling the two wires white flat ribbon off the main circuit power.
  4 - plug in power source and turn on the printer. Wait until you get an error message and press 'Ok '.
  5 - Disconnect the power supply.
  6 - plug cables flat ribbon by aligning and carefully pushing into the conectors on the main circuit.
  7 - Plug in power source and turn the printer on (printer preparing occurred).
  8. here, the message bad 0xc18a0001 error "ink system has failed" is now gone.

  http://www.FixYa.com/support/t599615-hp_photosmart_d7460_problem

  I got the error code Oxc18a0001 on my HP Photosmart D7260 printer.  I was able to clear the error code and get the printer working again by resetting the printer by pressing the "red eye removal" buttons and "print photos" together that I turned on the power.  I took out the "red eye removal" buttons and "print photos" when the printer is presented a menu that had an option of reset in it.  I used the touch screen and reset a Mohammed and Semi.  It did not offer that a 3rd reset option which was a country / language that was not needed by me right now.  After completing the two reset options the printer printed a test without my guest page there.  The end of the test page I used the power button to turn the printer off and then I enabled again and I was then able to use the printer as usual.  This is not the first time that I had this problem.  It is about the 4th to 6th.  It took me a while to understand this reset procedure and it was after long way to play on everyone and their problems.  I hope this post could help simplify the process for someone out there suffering from this problem as I was.  Hope this information is useful.

• Please help, the printer does not have 'ink system failure '.

  Hello

  Any help appreciated.  My printer is printer all-in-one Photosmart C7280.

  2 days ago my printer has not worked. It comes with several error messages after I turn it on. The first is "ink system failure: ink system has failed." Cannot copy, receive faxes or print. Refer to the printer documentation. Error: 0xc19a0025. Turn off the power, then new. »

  However when I turn off and then again via the "power" button, I get a message saying "abnormal termination. Then the same error message original returns (0xc19a0025). It is the most common error and won't go away. Then too, I get a message saying "problem Photo tray: lift the output tray, check the photo tray is pushed up to the stop, lower output tray. Despite the fact that I haven't used the photo tray in several months and it is in the correct position.

  So far I tried to turn on the printer, shut down several times by using the power button. Also, I turned off the printer in making last night (after having been closed properly) and back on this morning. I looked through the documentation of the printer, but could not find tips for troubleshooting for this kind of problem. I updated the driver from HP using software update on my mac, and the problem is still there.

  Now I get desperate, I rely on my printer/scanner/copier a lot!

  Thank you

  Nathalie

  This widget could not be displayed.