input key works as return key

Similar Questions

• Updated to 3.6. Extensions and themes stopped working. Updated to 6.0. Still does not work. Returned to 3.6. No dice. Renamed all the extension. Still does not work.

  automatically upgraded to Firefox 3.6. Extensions and themes stopped working. Updated to 6.0. Still does not work. Returned to 3.6.20. Still nothing. Renamed extension files still nothing. Help. everything worked great until the upgrade. Thems like Noia and Adblocker Plus still do not work.

  To help other users find solutions, please return to this Thread and log in to the forum with your user name and password:

  Click on 'resolved' beside the answer above that BETTER resolved your issue

  DO NOT CLICK on 'Solved It' next to this answer

• change input key after the upgrade to windows 8

  I use the pavilion dv6-7012tx laptop, recently I've updated the Windows 8 operating system and then upgrade when you press (shift + 2) gives me "while pressing on (shift +') gives @ may I know what is the problem.is there solutions."

  Hello okkarai1991. I understand that you have some problems with your keyboard after the upgrade to Windows 8. More specifically you get incorrect symbols when you use the combination of keys shift +. Is this correct?

  Though according to me, there is a setting in Windows itself, I would like to add that HP has not released drivers for all models of laptops for Windows 8 yet. Most of the models purchased after October 1, 2011 should be supported. This site has more information on HP and the upgrade to Windows 8.

  This looks like a case of Windows using a keyboard that is incorrect. Each language has several layouts depending on the region, it seems that you have one of the other selected. This is a correction which is normally found in Control Panel. The process to access the control panel is a bit different in Windows 8, so I'll give you detailed instructions.

  1. Press the Windows key to take you to the view of the office.
  2. Move your mouse to the upper right corner of the screen and move it to the bottom, this opens the bar of charms.
  3. Select settings in the bar of charms, then select Control Panel. Then select the Language Options.
  4. Click Add an input method, and then select 'QWERTY-US.'
  5. Remove the old method of entry, leaving only QWERTY U.S. and click OK.
  6. Restart the computer and verify that your work of combinations shift + you want.

  I hope it's useful!

• Satellite Pro C660-171 - Double entry and/or loss of input key while typing

  Toshiba Satellite Pro C660

  As we bought this laptop in November 10, she has had intermittent problems with typing. Find the keyboard will miss the characters typed or type them twice. Fortunately, he can this all day and then stop and return to normal.
  We restored it back to factory settings and still does intermittently. Our man IT insists it is a software problem, but has been unable to find what it is.

  Bizaarly, we bought two of these laptops at the same time and they both have the same defect.

  Any help?

  This should help you:
  + Questions with the Satellite and Satellite Pro L670 & C660 series laptop keyboard +.
  http://APS2.toshiba-tro.de/KB0/TSB1103370000R02.htm

  PS: This has been discussed here in the forum. Search function to find similar themes.

• Bad input key keyboard

  I have a Samsung NC10 notebook running XP Home Edition, version 2002 service pack 3.  I recently had to return to factory settings - since doing the [""] and [@] have swapped places and the pound sign (above the3) is now show [#]. I tried mskey in the run dialogue box, but it says file not found! Any help would be greatly appreciated

  Hello

  Yes, it seems to me that if you have a notebook that has the American language pack by default implemented. I think you should download the language English (UK) pack for the return parameters to which they belong.

  See this article. http://support.Microsoft.com/kb/926139

• Satellite P850-30W - the fan does not work after returning from the mode "Eve"

  I have a Toshiba Satellite P850 30W with bios 1.90.

  Sometimes the fan does not work at all after back mode standby on windows 7.
  What happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  Normally the fan starts to run when the CPU gets more than 50 degrees celsius and stops less than 50 celisus...

  I tried running Prime95 when this fan-this occurs and the time of the computer got dangerously high (near 100 degrees)! the fan did not start at all
  .. .This error could damage the laptop potentinally...
  to get the fan turns once again I have to restart windows

  anyone experienced this?
  I guess that the fix would be to never use standby... or toshiba needs to fix it with an update of the bios.

  > Sometimes the fan does not work at all after back mode standby on windows 7.
  > What has happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  You said it's happened twice and only sometimes done this means that above all the fans are working well?
  In this case, this would mean that it of difficult to reproduce this problem, but you might be right: maybe a BIOS update would help solve this problem permanently

  I found some discussions on the stand-by mode and fan activity and in most cases, the update of the BIOS was the key.

• Dell C1765NFW won't work if returned to sleep deep and on

  After looking around the forum, this seems to be a constant problem on different printers, city mine

  I have the printer connected via the network running on a server, it connected fine, my problem is that it goes in his deep sleep it does not print even though I turn it back on by pressing the button menu etc, the only way it will reconnect is if I turn it works again.

  I've updated to the latest firmware on the dell Web site and have the latest drivers, we know how to fix this bug

  see you soon

  Rongoldenbeard

  Only, I contacted Dell because my fax didn't work on my C1765NFW.  If the tech had me do the reset to solve the problem related to the fax... following and question IT CURED THE SLEEP/wake UP too.  Hope this helps someone else, as it has done for my machine:

  1. turn off the printer.

  2. turn running all by pressing the left, right and Menu keys.

  3. release the keys when "This Mode" and "Password" appears.

  4. press arrow up twice and press Select (or box).

  5. "this Mode", "Printer", and "FAX/Scanner" appear. (Entered in CE Diag mode..)

  6. press Select (check) "printer".

  7. Press down to "IOT Diag" and press Check.

  8. Press down "Set of Installation" and press on check.

  9. Press down to 'clear all NVM '.

  10. press Select (checkmark) twice to run the test.

  11 power cycle the printer back to the normal operating mode. (this should occur automatically)

  Once this is done, you must give your basic settings (language, time zone, telephone number and fax name, etc.).  But it's a MINOR inconvenience.  My machine now works like new!

  I hope it works for you.  Good luck!

• Input processor may not return the array

  Hi all
  
  I've set up an EntryProcessor to return the results of the calculated amounts, however, under the exception is thrown when retrieving the result. Any idea? I tried to change to return BigDecimal instead of BigDecimal [], it works. Why?
  
  Exception in thread "main" java.lang.ClassCastException: [Ljava.lang.Object; incompatible with [Ljava.math.BigDecimal;
  
  
  BigDecimal results = (BigDecimal []) CacheHelper.getCounterPartyCache () .invoke (new FttCntptId("052753"), new CreateOrderProcessor());
  
  Henry

  922963 wrote:
  Hi all

  I've set up an EntryProcessor to return the results of the calculated amounts, however, under the exception is thrown when retrieving the result. Any idea? I tried to change to return BigDecimal instead of BigDecimal [], it works. Why?

  Exception in thread "main" java.lang.ClassCastException: [Ljava.lang.Object; incompatible with [Ljava.math.BigDecimal;

  BigDecimal results = (BigDecimal []) CacheHelper.getCounterPartyCache () .invoke (new FttCntptId("052753"), new CreateOrderProcessor());

  Henry

  Hi Henry,.

  It can return the paintings, but he cannot return correctly typed arrays.

  On the client side, this table has been deserialized as an Object [] and not as a BigDecimal [] and, therefore, it cannot be cast to BigDecimal [].

  So just change the declaration of the Object [] results variable and do the distribution on the elements instead.

  Best regards

  Robert

• N5902 Input Device works not when the Dongle is attached directly to the USB Port of the 3.0

  It's a big problem because the port only 2.0 on my Lenovo Yoga 700 is also used for charging and unless I'm on battery so I have to fix the dongle because otherwise the USB device is not recognized and I can't use my N5902 input device. Someone has an idea, a driver so I can install it manually? I use Windows 10.

  I managed to find a solution, I applied "Solution 2" of https://www.drivereasy.com/knowledge/fix-issue-after-upgrade-system-to-windows-10-usb-ports-don ' t - wor...

• Applications using cmd + tab switching does not work (reverse return) when you use several spaces in the Sierra

  I usually have a lot of apps open it in full screen across a number of different areas.  In El Capitan, when I used cmd + tab to switch apps, it would just go directly to the application in the entire app was opened in.  Now, he tries to switch to the app, but then IMMEDIATELY switches to the space, in that I was already.  It's like if someone is sitting there playing this cruel on me joke where whenever I try to go to the app, it shows to me and then immediately sent me immediately.  Everyone knows something similar to this?

  To re-create the problem, have a few apps open it in full screen in different spaces, then try to switch to another application in another space using cmd + tab or try to switch to an application that is just open on the main office space.  It comes immediately rebascule on your original app!  I'm ready to tear my hair out!

  Feedback: Apple http://www.apple.com/feedback/

  With your same Apple ID, you can register for a free developer account and start a conversation with Apple engineers

  Bug Reporter https://bugreport.apple.com/

• Using a control of the chain with the Enter key, return * and * allowing repeated identical entry

  Hi all

  There must be a simple solution for this, but it's Friday afternoon, and my brain is not cooperating.

  I create a simple terminal through which a user can interact with an instrument. My question is about the only query string control. The button send and the Terminal Table are here for reference.

  

  Here is my desired behavior:

  (a) the user types a command in the field of the query, tape input or return. An event is triggered, and the request is sent to the instrument. The focus remains on the field in the query.

  (b) with any other action the interface user, the user types Enter or return again and again, by triggering an event that sends the request to the instrument every time Enter or return is typed. The focus remains on the field in the query.

  Here's what I have:

  

  This allows for one), but fails to b). The reason is, because the value of the field in the query has not changed, change value event does not fire when the user starts to spam keys enter or return. There is a way around this, as suggested by this post. Here is the solution in a few words:

  

  Instead of looking for the change in the value of the query command, the event fires for each key event to the bottom of the control and resembles a pressure of enter key or return. What attracts the user action, even if the content of the field of the request have not changed. The problem with this approach is that, when this event fires, I need to read the value of the query string order and send it to the instrument, but the value I get via the local Variable query is the old value, probably because the key down event fires before the value of query is saved as changed. Is there a way to programatically "enter" the contents of the control channel so it is recorded as a change in value, until I have the question via a local Variable? Is there a different way I should go about it? I'd rather not do anything that bound the input keys or return to this particular area, since I have many other UI elements that need these keys in my program.

  If not, is there a way to make the control of the fire 'Change of value' query string event when the user presses enter or return even if the value has not changed?

  Thank you for your comments!

  I thought about it.

  (1) control of the string (query) a value of update while typing.

  (2) save the key event down to the control of the chain. If the entry or return was pressed, send the state machine to the State 'send request '.

  

  (3) in the application 'send' State read control channel via the local Variable value.

  

  This is the desired behavior to allow the user repeatedly hit entry or return to regularly send a command, and the user can also type in a new order and send it by pressing enter or return.

  Thanks to all who have helped me this something to think about!

• Satellite C50-A133 - language bar shortcut keys keep reset automatically

  Hello!

  I have a laptop Toshiba Satellite C50-A133 with 8.1 for Windows 64-bit (the system of English UK language) of the United Kingdom. So far I have not had major problems with Windows 8.1 but an annoying problem keeps coming back.

  There are currently 12 languages/installed input methods, which some I have assigned shortcuts keyboard, Ctrl + number or Ctrl + Shift + number.

  After the system boots, they work fine, but after a while becomes disabled without me aware to have done anything to turn them off. The only thing I can do is to open the menu language preferences and assign shortcuts again.

  They disappeared in the menu language of shortcut keys, specifically each shortcut that I put has changed 'None '. This happens after a while little matter what I use the computer for.

  Restart the system always back to my settings shortcuts but working with computer for a while turns them off. I use Avast, Malwarebytes, Auslogics BoostSpeed and Windows Defender regularly, as well as CCleaner at startup. I don't think it's one of these the origin of the problem, as happens when none of them scan as well. Using the Windows key + tab bar to change the input language works very well also.

  All languages are displayed and can be activated in this way. It's just the shortcut keys that keep disappearing. It is not a huge problem but can be troublesome when needing to switch between 2 or 3 languages quickly without having to scroll through all 12 of them. If someone has had this problem and is there a way to fix it?

  I have already explained this problem to Microsoft.
  They had no solution that worked and he suggested, it was a hardware problem and I need to contact Toshiba instead.

  Thank you!

  To be honest I don't know if I understand your problem, but I know first boot after laptop computer purchase, you can set the keyboard input language and that s it Mr. of course you can also change it and add some other input languages.

  To me, it seems crazy that 12 languages are available as installed services. Who did this?

  Can you please tell us how it all started? I mean I guess you use UK layout only and English as an input language. The problem with 12 languages seems crazy to me. Have you tried to change something? Have you tried to delete all the other languages?

  Hardware problem? I don't know what think of Microsoft on this issue, but there is a simple way to check this. Reinstall the original recovery image and check how it works with the factory settings.

• HP Envy laptop: keys of Action does not not on HP Envy 15

  Hello

  A few days ago the keys to control the brightness, backlight on the keyboard and volume all the stopped working and returned to their previous feature keys (f) in accordance with the suggestion of other posts on this forum, I tried to disable and enable the option in the BIOS, installing drivers HP quick keys, software update through Windows Update and using the HP Support Assistant help desk. Nothing has worked so far.

  I'm on Windows 10 64-bit edition.

  The computer model is HP Envy 15 t-ae100

  Product number: L8Y93AV

  Serial number: [personal information deleted]

  BIOS: F.25-12/16/2015

  Any help to fix this would be appreciated.

  For some reason, the problem has mysteriously decided himself.

• I need to reinstall Windows Vista but the sticker on the laptop product key is not readable.

  My partner has an Acer laptop running Windows Vista Basic 32-bit. He needs a complete reinstallation of Windows because there a lot of problems now. The problem is the sticker of the product key on the laptop is often illegible. I tried to use the Magic Jelly Bean finder key to resolve this issue, but the key does not match what the letters which are readable on the sticker. I tried this on my own laptop and had the same problem (sticker key did not key on the computer). Neither laptops have had Windows reinstalled before. I learned that the keys posted by Magic Jelly Bean are in fact license keys of Volume factory installed by the OEM rather than found on the stickers product keys and Volume license keys cannot be used to reinstall Windows.

  His cell phone doesn't have a recovery disk or a recovery partition, but even if she did, given its current state, a complete reinstallation is what it takes. Her cell phone is not come with a Windows Installation DVD, either, but we can borrow one from a friend who owns a disk with the same version of Windows as his laptop and I know that works perfectly. We just need a way to recover the product key that was on the sticker. We are not ready to buy a new copy of Windows that we already have a license (through the purchase of the laptop) key.

  PS I remember that I helped my father after reinstall Windows XP. We tried both the key on the sticker of his PC and the one that we found on the PC itself (Volume key). In the end, only the key on the sticker has worked. This confirms that a Volume license key cannot be used to reinstall Windows.

  Hello

  We cannot help you with your product key and there are no records of loan use

  recovery discs are brand and the specific model

  and product key finder programs will not help you find product keys that you can use vista preinstalled in these circumstances

  to reinstall vista use either disk or recovery partition recovery manufacturer, since they do not normally require an input key product on your part

  The manufacturer must provide a way to reinstal vista or by disk or a recovery Partition

  Contact Acer recovery Vista disc

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  and Acer has a "hidden" recovery partition

  Normally with an Acer, you press Alt + F10 at startup to start the process, or if it is still ongoing, you go to section eRecovery under [programs and search for how to make recovery discs and the use of the recovery partition

• Where is my files & why I can't register with the code the product key on the computer?

  A few days ago the computer crashed, and I received a message from the Startup Repair.  At a certain point in the process I had to restore the entire operating system with module which apparently comes with Vista.  He gave me the choice to do so without deleting my files, but it has eliminated all my work files.  How can I get back them?  Also, can not enter code product key when you are prompted.  It does not accept the last letter.

  Hello

  whether you use manufacturers recovery process, contact them on their recovery process saved your files on

  _______________________________________________________________________________

  regardingf the product key, you can type an incorrect number

  but the process of recovery of the manufacturer does not normally require an input key product on your part

  and your programs must be reinstalled after a restore to factory settings

  ______________________________________________________________________________

  you don't say what you're trying to activate with a product key

  If you try to activate Office, read this:

  ·                         Office TRIAL activation

  ·                         you would have a preinstalled trail version of office installed

  There are only so many days use or use of the times with a version of office to test

  I'm sorry but the Office comes for free with a windows operating system

  You must purchase separately the Office

  and the product key on your computer/laptop is for the windows operating system not the office suite of applications

  link below is to the store of microsft office versions and prices

  http://store.Microsoft.com/Microsoft/Office/category/2

  You may also be interested to read everything and downloaded the free free office suite of applications office at the link below

  http://www.OpenOffice.org/