INS-40912 virtual host name]: oracle-vip is assigned to another system

I got the above error when I try to install RAC on redhat linux.

I have configured the virtual IP on/etc/hosts, and it shows in ifconfig | net grep.

What should I do to fix this error.

I have not found many documents in support of the oracle.

Do I have to configure the virtual IP address in the dns?

Thank you

user569151 wrote:
While they are supposed to be included in the DNS system, right?

Where is the link for that? I checked the documents installation oracle, under manual configuration of the network, did not mention VIP had to be DNS.

No, if you are using DNS for the resolution of network then all IPs (not only VIP) must be defined in the DNS. If you are using host file then all IP addresses must be defined in the host file

See you soon

Tags: Database

Similar Questions

After uninstalling the grid Infrastructure: virtual host name [INS-40912] assigned to another system on the network

Hello
I deleted successfully installed grid Infrastructure software. Now, I installed again it but the installer complains about '[INS-40912] virtual host name assigned to another system on the network", which he complains not in the first installation process. :/
EDIT: I checked and both nodes of the cluster are interpingable through their virtual IP address.
I see that the previous installation has created a clean interface for this virtual IP address:
eth0:2 Link encap HWaddr 00:50:56:B9:0E:AA
INET addr:10.200.11.159 Bcast:10.200.11.255 mask: 255.255.252.0
RUNNING BROADCAST MULTICAST MTU:1500 metric: 1
Basis of interruption: 19 address: 0x2000

OK solved: I just do:

ifconfig eth0:2 down

Virtual host name

We have one Equallogic running on a PS4100. I'm relatively new to the learning system so even my way around it. This could be a simple query.

My question is this: we have an old server with 4 TB of data storage. Call the SERVER1. It is retirement due.

I would like to move that data to the Equallogic, where I have plenty of room for it.

However, we have many, many customers running many readers mapped to SERVER1. Instead of remapping all, which will have an age, y at - it a facility inside SAN HQ or group leader to give a virtual host name (which will be "SERVER1") and intellectual property to a volume? Pretty sure that our former NAS system a few years back was able to do this.

For customers, the transition would be seamless - they would always connect to the same host name, only it is now hosted on the Equallogic rather than being a stand-alone server. I need to update the DNS entries and turn off the original Server1 completely of course.

Hello

# The berries of the PS Series by themselves are just s SAN storage device that use the iSCSI Protocol to connect servers to storage. . They are not the NAS file servers on their own. Dell offers a NAS device that fits completely into the SAN PS, known as a FS7600.

Kind regards

Don

abstractWSDL points to the physical host name when using URL loadbalanced
Document tracking "Oracle® Fusion Middleware Enterprise Deployment Guide for Oracle SOA Suite 11 g Release 1 (11.1.1) E12036-04" to implement soa suite 11 g PS2 in two node cluster environment.

Hostname SOA physical server (SOAHOST1 & SOAHOST2)

More SOA is configured with the virtual host name (SOAHOST1VHN1 & SOAHOST2VHN1 Port: 8001) and loadbalancer URL is http://soa.mycompany.com:7777.

Successfully completed installation and the steps of post-installation as update callbackServerURL and serverURL to http://soa.mycompany.com:7777

Also updated HttpServerURL as http://soa.mycompany.com:7777.

Composite SOA successfully deployed to the cluster from jdeveloper soa and tested control of Fusion middleware 11g (EM) webservices. And his works fine.

When I goto page to Test Composite, the WSDL and endpoint URL appear as expected is http://soa.mycompany.com:7777 / soa-infra/services/default/ccValidation/getStatusByCC? WSDL and http://soa.mycompany.com:7777 / soa-infra/services/default/ccValidation/getStatusByCC

But when I access the WSDL in the abstractWSDL browser is having hostname of the server that is mentioned below. Cause this problem by calling this webservice of some other jdeveloper 11g bpel processes. When I enter the url http://soa.mycompany.com:7777 WSDL / soa-infra /... in Web service activity (after placing the activity in the corridor of "External References") and wire BPEL to webservice, WSDL url in webservice is changed to http://soahost1.mycompany.com:8001 / soa-infra /... and wiring is faulty.

Since soa suite managed server is configured with the virtual host name, the wsdl file is accessible only by using their virtual hostnames (SOAHOST1VHN1 & SOAHOST2VHN1) and load balancer url. Access WSDL using the physical hostname soahost1 would result in "Page not found" error. Why Jdeveloper isn't able to wire bpel with webservice component.

Question:

Is there any configuration that I need to change for this problem?

Thanks in advance.

Kind regards
Kumar

===========================================

<? XML version = "1.0" encoding = "UTF-8"? >
-< wsdl:definitions name = "getStatusByCC" targetNamespace = "http://oracle.com/sca/soapservice/CreditCardValidation/ccValidation/getStatusByCC" xmlns:tns = "http://oracle.com/sca/soapservice/CreditCardValidation/ccValidation/getStatusByCC" xmlns:inp1 = "http://www.globalcompany.com/ns/CCAuthorizationService" xmlns:wsdl = "http://schemas.xmlsoap.org/wsdl/" xmlns:flt1 = "http://www.globalcompany.com/ns/CCAuthorizationService" xmlns:out1 = "http://www.globalcompany.com/ns/CCAuthorizationService" >
-< wsdl:documentation >
_ * < abstractWSDL > < /abstractWSDL > http://soahost1.mycompany.com:8001/soa-infra/services/default/ccValidation!1.0/getStatusByCC.wsdl * _
< / wsdl:documentation >
-< wsdl: types >
-< scheme xmlns = "http://www.w3.org/2001/XMLSchema" >
< import namespace = "http://www.globalcompany.com/ns/CCAuthorizationService" schemaLocation = "http://soa.mycompany.com:7777/soa-infra/services/default/ccValidation/getStatusByCC?XSD=xsd/creditcheck.xsd" / >
< / schema >
-< scheme xmlns = "http://www.w3.org/2001/XMLSchema" >
< import namespace = "http://www.globalcompany.com/ns/CCAuthorizationService" schemaLocation = "http://soa.mycompany.com:7777/soa-infra/services/default/ccValidation/getStatusByCC?XSD=xsd/creditcheck.xsd" / >
< / schema >
-< scheme xmlns = "http://www.w3.org/2001/XMLSchema" >
< import namespace = "http://www.globalcompany.com/ns/CCAuthorizationService" schemaLocation = "http://soa.mycompany.com:7777/soa-infra/services/default/ccValidation/getStatusByCC?XSD=xsd/creditcheck.xsd" / >
< / schema >
< / wsdl: types >

======================================================
Try to define the interface host and port of Front-ends such as specified in the link below

http://download.Oracle.com/docs/CD/E12840_01/WLS/docs103/webserv/setenv.html#wp220945

Address: soap in the dynamic wsdl document is determined according to the following priority:

# If the Web Service is deployed on a cluster and the cluster host Frontend, Frontend HTTP Port, and the Port HTTPS Frontend are defined, WebLogic Server then uses these values in the server of the dynamic WSDL address.

# If the previous cluster values are not defined, but the Host Frontend, Frontend HTTP Port and HTTPS front-end Port values are defined for the server on which the Web Service is deployed, WebLogic Server then uses these values in the address of the server.

# If these values are not defined for the cluster or an individual server, WebLogic Server then uses the address of the server the query WSDL in the dynamic WSDL.

Re: ORACLE_HOSTNAME-INS-40904 does not resolve to a valid host name
Hello

I am installing 11.2 grid on RHEL 5.5 but infrastructure is

Re: ORACLE_HOSTNAME-INS-40904 does not resolve to a valid host name

I've already put the fully qualified host name oracle_hostname! can someone please! the other thing I noticed is installer of grid infrastructure is by default by choosing the IP as hostname! I'm talking about the screen where I enter host name for my name virtual ip address of the cluster nodes

I also need to change the name to ip address virtual it is because the default Installer took more name: 10 - vip.70.22.33 (which is the combination of my ip address and virtual ip address!

SSH works fine, all entries are in the dns and I can ping...

the last time I didn't even set the oracle_hostname when I installed 11.2 on 5.4 (this time its on 5.5)

Thank you
Set you your hostname in/etc/hosts?

For example:
```
127.0.0.1        host.example.com host localhost.localdomain localhost
::1             localhost6.localdomain6 localhost6
192.168.1.1        host.example.com host
```

Problem with Virtual PC: can automatically log on to the comments because the host name is added comments user name after you have entered identifying information.

When activate the integration in Virtual PC features, then the dialog box "Enter your credentials" appears. After entering the username and password of the system cannot connect because the host name is added in front of the user name that I entered. Example: Guest user name is "Admin". The host name is "XYZ". Vrtual PC try to connect as a user "XYZ/Admin" on the comment system. After getting the error message I can manually correct the user name in the normal windows login screen on the client and open a session. However, no saved credentials, to be asked to log on again whenever I have resize the Virtual PC window. Any ideas how to solve this problem? Thank you!

Hello

What is the error message?

Please try following the steps for the computer to remember the credentials and do not ask the password to open each programs:

1. when it asks for a password, click Cancel . Without integration feature, you are allowed to log on with an account that do not have a password.
2. set a password for your current user.
3. click on Tools , Windows Virtual PC, choose the integration features allow.
a. type the password, check the box ' remember my references of "and click OK to open a session.»
b. after joining the domain, logon in XP mode with the local administrator account.

How to get the host name of the physical computer inside a virtual machine until the user logs in Windows?

I don't know if this is the right place to post this question, I develop software to support VMWare PCoIP and need to know how to get the host name of the physical machine (which manages the virtual machine and View Client) within a virtual machine before the user logs in Windows of the virtual machine.
I understand there are two ways to read the host name, via the HKEY_CURRENT_USER\Volatile Environment registry and environment variables, but they are available once the user is connected. I need info before the user connects.
Is there a VMware API that can be called or asked the host name?
Thank you.

Not on the broker, but there are the startup scripts to log on to the computer virtual itself: http://pubs.vmware.com/view-52/topic/com.vmware.view.integration.doc/view_integration_startsession_script.9.2.html

Note that these executed when a virtual desktop computer allocated connection, not to the point that the client connects - it is possible for the customer to not complete the connection (crash, cancel, network failure) and so any what solution you design must handle this.

Mike

Access to Oracle Press VirtualBox virtual host

Hello
I have a windows host system 8, install the Virtual Box last edition.
The guest operating system is Linux oracle that came with the selection of pre-designed developer programs Oracle's VM.
The virtual machine is set to HOST ONLY the network settings.
Now, the thing is I want to access the Oracle in the guest from my windows host computer.
the guest operating system indicates the IP 192.168.56.101. I can ping the IP address of the HOST machine, but cannot connect to the
Developer SQL to oracle in the guest to the host OS. He goes on to say that impossible to connect the network card.
Please I need help, now please do not say that to install the oracle in the window itself. In fact, I want to do the same on my macbook pro since it is my main machine.

Hello guys,.

Thanks for the responses you provided really appreciate it.

I made this connection and access between the host and the guest, and to access the oracle on the guest database.

System information:
- MacBook Pro - OS X 10.8.4
- RAM 4 GB [go to 8 GB]
- Package VM: Oracle Virtual Box
- Guest VM: Oracle VM [ http://goo.gl/dtbzO ] developer pre-designed program selection
- Network connection: host only
Steps to connect the host to host
1. If you see the "ifconfig", you will see a network card named 'vboxnet0' [created after the installation of VB]
2. Check the address allocated to the virtual machine [MAC]-> preferences-> network: copy the beginning or between address, which in my case has been 192.168.56.101 [start a]
3. Assign the address to the vboxnet0 adepter by terminal: sudo ifconfig vboxnet0 alias 192.168.56.101 to the top
4. Change the virtual machine network affecting "Host," only
5. Select the vboxnet0 virtual adapter in the adapter list, apply the configurations, click ok
6. Start the guest operating system and login
7. Check the IP configuration it by ifconfig, you will find the map eth0 with the same IP address that you assigned to the vboxnet0 on the host machine.
8. Sql Developer on the host machine fire
9. Make a new connection and "Hostname" as even as the vboxnet0 IE. 192.168.56.101, fill in the other details of the connection details Oracle needed comments
10. Test the connection
11. Woollaaaa you are finished

Set the host name for a virtual machine

While the vApps instantiation using a model about the same way as the sample of HellovCloud.java, I need to be able to change the host name (called the name of the computer in vCD) of the only virtual machine contained in the VAPP. I can't find examples on how to do it. Any ideas?

Hope that this helps, I took it out some code that we use (SDK). NET - this is not an exact copy of the labour code, but must be what it takes to get there.

String modifierText = "1234";

With complete API v1.5 may need to change this kind of object to Vm

VAPP vm = GETTHECHILDFROMTHEAPP (VAPP. GetChildrenVms());

If (vm. GetGuestCustomizationSection()! = null)

{

GuestCustomizationSectionType guestSection is vm. GetGuestCustomizationSection();

int len = guestSection.ComputerName.Length;

If (len > 10) len = 10;

guestSection.ComputerName = guestSection.ComputerName.Substring (0, len) + modifierText;

Try

{

VM. UpdateSection (guestSection);

}

catch (VCloudException ex)

{

Exception thrown by 1.5 hosts: VCloudException

(The parameter is not supported in the current context: AdminPassword)

bug workaround

If (Message.Contains ("AdminPassword") e.g.)

{

AdminPassword value NULL and try again

guestSection.AdminPassword = null;

VM. UpdateSection (guestSection);

} else {}

throw;

}

}

}

Change the host name and the url of the Oracle Application
Hello, I need help to change the url of Application Oracle
OLD url - http:// appssvr.XYZ.com:8007
NEW url - http://erp.XYZ.co.in:8002

Help, please
Hi Richa,

Please go through the below mentioned Notes Metalink.
You just need to change the appropriate settings in the context of requests ($APPL_TOP/admin/*.xml, location) file and run Autoconfig.

341322.1 how to change the hostname of a stream of Applications using automatic configuration
338003.1 how to change the host name or port of the database layer using automatic configuration

Let me know if you still have doubts.

Concerning
Neeraj Sharma

Restore the virtual hard drive backup on a different node with different IP and host name.
Hi guys,.
I want to do the following.

My reliable backup strategy is the virtual hard drive backup. The database is installed on a virtual particulay machine (node). Now, I do not take the backup of the DBF files or control files or files from archive.
I rely on the virtual hard disk backup. It takes the entire Virtual Machine backup. Now, I wanted to restore this virtual hard drive backup to a different node with different IP and host name.
But before I start the database, there are some things I need to do.
As change address IP address and the hostname registered with the database installed and its services.

Please guide me through the steps on how to perform the activity.

Concerning
Lam...
SOA admin.
I think that the whole operating system will be restored in a new virtual machine... I have it... The changes will have to be done in the file listener.ora (hostname or IPADDRESS and also PORT NO in case you want another port as the existing one). Once you have made the changes that you have to bounce the listener, I mean stop and start the listener... I don't think that any other changes are needed... Make sure that the same need for entries (from the listener) to be included in the TNSNAMES file. ORA file both client-side... The tns service is used to connect to the remote database server (from the demand side or whatever source you used to connect to the database server)... I just think that the change to do... Hope its clear... Please try...

HTH
Kind regards

IMRAN KHAN

ins-20802 - assistant configuration net oracle failed during installation - centos 7

Hello I'm trying to follow the Manual for installation of the Oracle 12 c. In fact it was already installed on the machine and then uninstalled.

During installiation, I get the error "[ins 20802] oracle net configuration assistant has failed during installation" window. And the proposed detailed log file, where I can see:

INFO: No arguments to pass to stdin

INFO: ... GenericInternalPlugIn: starting read loop.

INFO: Read:

WARNING: Skipping line:

INFO: End of argument passing to stdin

INFO: Read: Parsing command line arguments:

WARNING: Skipping line: Parsing command line arguments: