Virtual host name

Similar Questions

• After uninstalling the grid Infrastructure: virtual host name [INS-40912] assigned to another system on the network

  Hello

  I deleted successfully installed grid Infrastructure software. Now, I installed again it but the installer complains about '[INS-40912] virtual host name assigned to another system on the network", which he complains not in the first installation process. :/

  EDIT: I checked and both nodes of the cluster are interpingable through their virtual IP address.

  I see that the previous installation has created a clean interface for this virtual IP address:

  eth0:2	Link encap HWaddr 00:50:56:B9:0E:AA
  	INET addr:10.200.11.159 Bcast:10.200.11.255 mask: 255.255.252.0
  	RUNNING BROADCAST MULTICAST MTU:1500 metric: 1
  	Basis of interruption: 19 address: 0x2000

  OK solved: I just do:

  ifconfig eth0:2 down

• INS-40912 virtual host name]: oracle-vip is assigned to another system

  I got the above error when I try to install RAC on redhat linux.
  
  I have configured the virtual IP on/etc/hosts, and it shows in ifconfig | net grep.
  
  What should I do to fix this error.
  
  I have not found many documents in support of the oracle.
  
  Do I have to configure the virtual IP address in the dns?
  
  Thank you

  user569151 wrote:
  While they are supposed to be included in the DNS system, right?

  Where is the link for that? I checked the documents installation oracle, under manual configuration of the network, did not mention VIP had to be DNS.

  No, if you are using DNS for the resolution of network then all IPs (not only VIP) must be defined in the DNS. If you are using host file then all IP addresses must be defined in the host file

  See you soon

• abstractWSDL points to the physical host name when using URL loadbalanced

  Document tracking "Oracle® Fusion Middleware Enterprise Deployment Guide for Oracle SOA Suite 11 g Release 1 (11.1.1) E12036-04" to implement soa suite 11 g PS2 in two node cluster environment.
  
  Hostname SOA physical server (SOAHOST1 & SOAHOST2)
  
  More SOA is configured with the virtual host name (SOAHOST1VHN1 & SOAHOST2VHN1 Port: 8001) and loadbalancer URL is http://soa.mycompany.com:7777.
  
  Successfully completed installation and the steps of post-installation as update callbackServerURL and serverURL to http://soa.mycompany.com:7777
  
  Also updated HttpServerURL as http://soa.mycompany.com:7777.
  
  Composite SOA successfully deployed to the cluster from jdeveloper soa and tested control of Fusion middleware 11g (EM) webservices. And his works fine.
  
  When I goto page to Test Composite, the WSDL and endpoint URL appear as expected is http://soa.mycompany.com:7777 / soa-infra/services/default/ccValidation/getStatusByCC? WSDL and http://soa.mycompany.com:7777 / soa-infra/services/default/ccValidation/getStatusByCC
  
  
  But when I access the WSDL in the abstractWSDL browser is having hostname of the server that is mentioned below. Cause this problem by calling this webservice of some other jdeveloper 11g bpel processes. When I enter the url http://soa.mycompany.com:7777 WSDL / soa-infra /... in Web service activity (after placing the activity in the corridor of "External References") and wire BPEL to webservice, WSDL url in webservice is changed to http://soahost1.mycompany.com:8001 / soa-infra /... and wiring is faulty.
  
  Since soa suite managed server is configured with the virtual host name, the wsdl file is accessible only by using their virtual hostnames (SOAHOST1VHN1 & SOAHOST2VHN1) and load balancer url. Access WSDL using the physical hostname soahost1 would result in "Page not found" error. Why Jdeveloper isn't able to wire bpel with webservice component.
  
  Question:
  
  Is there any configuration that I need to change for this problem?
  
  Thanks in advance.
  
  Kind regards
  Kumar
  
  ===========================================
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  -< wsdl:definitions name = "getStatusByCC" targetNamespace = "http://oracle.com/sca/soapservice/CreditCardValidation/ccValidation/getStatusByCC" xmlns:tns = "http://oracle.com/sca/soapservice/CreditCardValidation/ccValidation/getStatusByCC" xmlns:inp1 = "http://www.globalcompany.com/ns/CCAuthorizationService" xmlns:wsdl = "http://schemas.xmlsoap.org/wsdl/" xmlns:flt1 = "http://www.globalcompany.com/ns/CCAuthorizationService" xmlns:out1 = "http://www.globalcompany.com/ns/CCAuthorizationService" >
  -< wsdl:documentation >
  _ * < abstractWSDL > < /abstractWSDL > http://soahost1.mycompany.com:8001/soa-infra/services/default/ccValidation!1.0/getStatusByCC.wsdl * _
  < / wsdl:documentation >
  -< wsdl: types >
  -< scheme xmlns = "http://www.w3.org/2001/XMLSchema" >
  < import namespace = "http://www.globalcompany.com/ns/CCAuthorizationService" schemaLocation = "http://soa.mycompany.com:7777/soa-infra/services/default/ccValidation/getStatusByCC?XSD=xsd/creditcheck.xsd" / >
  < / schema >
  -< scheme xmlns = "http://www.w3.org/2001/XMLSchema" >
  < import namespace = "http://www.globalcompany.com/ns/CCAuthorizationService" schemaLocation = "http://soa.mycompany.com:7777/soa-infra/services/default/ccValidation/getStatusByCC?XSD=xsd/creditcheck.xsd" / >
  < / schema >
  -< scheme xmlns = "http://www.w3.org/2001/XMLSchema" >
  < import namespace = "http://www.globalcompany.com/ns/CCAuthorizationService" schemaLocation = "http://soa.mycompany.com:7777/soa-infra/services/default/ccValidation/getStatusByCC?XSD=xsd/creditcheck.xsd" / >
  < / schema >
  < / wsdl: types >
  
  ======================================================

  Try to define the interface host and port of Front-ends such as specified in the link below

  http://download.Oracle.com/docs/CD/E12840_01/WLS/docs103/webserv/setenv.html#wp220945

  Address: soap in the dynamic wsdl document is determined according to the following priority:

  # If the Web Service is deployed on a cluster and the cluster host Frontend, Frontend HTTP Port, and the Port HTTPS Frontend are defined, WebLogic Server then uses these values in the server of the dynamic WSDL address.

  # If the previous cluster values are not defined, but the Host Frontend, Frontend HTTP Port and HTTPS front-end Port values are defined for the server on which the Web Service is deployed, WebLogic Server then uses these values in the address of the server.

  # If these values are not defined for the cluster or an individual server, WebLogic Server then uses the address of the server the query WSDL in the dynamic WSDL.

• Problem with Virtual PC: can automatically log on to the comments because the host name is added comments user name after you have entered identifying information.

  When activate the integration in Virtual PC features, then the dialog box "Enter your credentials" appears. After entering the username and password of the system cannot connect because the host name is added in front of the user name that I entered. Example: Guest user name is "Admin". The host name is "XYZ". Vrtual PC try to connect as a user "XYZ/Admin" on the comment system. After getting the error message I can manually correct the user name in the normal windows login screen on the client and open a session. However, no saved credentials, to be asked to log on again whenever I have resize the Virtual PC window. Any ideas how to solve this problem? Thank you!

  Hello

  What is the error message?

  Please try following the steps for the computer to remember the credentials and do not ask the password to open each programs:

  1. when it asks for a password, click Cancel . Without integration feature, you are allowed to log on with an account that do not have a password.
  2. set a password for your current user.
  3. click on Tools , Windows Virtual PC, choose the integration features allow.
  a. type the password, check the box ' remember my references of "and click OK to open a session.»
  b. after joining the domain, logon in XP mode with the local administrator account.

• How to get the host name of the physical computer inside a virtual machine until the user logs in Windows?

  I don't know if this is the right place to post this question, I develop software to support VMWare PCoIP and need to know how to get the host name of the physical machine (which manages the virtual machine and View Client) within a virtual machine before the user logs in Windows of the virtual machine.

  I understand there are two ways to read the host name, via the HKEY_CURRENT_USER\Volatile Environment registry and environment variables, but they are available once the user is connected. I need info before the user connects.

  Is there a VMware API that can be called or asked the host name?

  Thank you.

  Not on the broker, but there are the startup scripts to log on to the computer virtual itself: http://pubs.vmware.com/view-52/topic/com.vmware.view.integration.doc/view_integration_startsession_script.9.2.html

  Note that these executed when a virtual desktop computer allocated connection, not to the point that the client connects - it is possible for the customer to not complete the connection (crash, cancel, network failure) and so any what solution you design must handle this.

  Mike

• Set the host name for a virtual machine

  While the vApps instantiation using a model about the same way as the sample of HellovCloud.java, I need to be able to change the host name (called the name of the computer in vCD) of the only virtual machine contained in the VAPP. I can't find examples on how to do it. Any ideas?

  Hope that this helps, I took it out some code that we use (SDK). NET - this is not an exact copy of the labour code, but must be what it takes to get there.

  String modifierText = "1234";

  With complete API v1.5 may need to change this kind of object to Vm

  VAPP vm = GETTHECHILDFROMTHEAPP (VAPP. GetChildrenVms());

  If (vm. GetGuestCustomizationSection()! = null)
  {
  GuestCustomizationSectionType guestSection is vm. GetGuestCustomizationSection();
  int len = guestSection.ComputerName.Length;
  If (len > 10) len = 10;
  guestSection.ComputerName = guestSection.ComputerName.Substring (0, len) + modifierText;
  Try
  {
  VM. UpdateSection (guestSection);
  }
  catch (VCloudException ex)
  {
  Exception thrown by 1.5 hosts: VCloudException
  (The parameter is not supported in the current context: AdminPassword)
  bug workaround
  If (Message.Contains ("AdminPassword") e.g.)
  {
  AdminPassword value NULL and try again
  guestSection.AdminPassword = null;
  VM. UpdateSection (guestSection);
  } else {}
  throw;
  }
  }
  }

• Restore the virtual hard drive backup on a different node with different IP and host name.

  Hi guys,.
  I want to do the following.
  
  My reliable backup strategy is the virtual hard drive backup. The database is installed on a virtual particulay machine (node). Now, I do not take the backup of the DBF files or control files or files from archive.
  I rely on the virtual hard disk backup. It takes the entire Virtual Machine backup. Now, I wanted to restore this virtual hard drive backup to a different node with different IP and host name.
  But before I start the database, there are some things I need to do.
  As change address IP address and the hostname registered with the database installed and its services.
  
  Please guide me through the steps on how to perform the activity.
  
  Concerning
  Lam...
  SOA admin.

  I think that the whole operating system will be restored in a new virtual machine... I have it... The changes will have to be done in the file listener.ora (hostname or IPADDRESS and also PORT NO in case you want another port as the existing one). Once you have made the changes that you have to bounce the listener, I mean stop and start the listener... I don't think that any other changes are needed... Make sure that the same need for entries (from the listener) to be included in the TNSNAMES file. ORA file both client-side... The tns service is used to connect to the remote database server (from the demand side or whatever source you used to connect to the database server)... I just think that the change to do... Hope its clear... Please try...

  HTH
  Kind regards

  IMRAN KHAN

• Angular 2 http.get () fails with "cannot resolve the host name.

  I am trying to get 2 angular (well, ionic 2 actually, but the call failure is part of the kinetic moment) to shoot some json from the web. My code works fine on iOS or Android (via Cordova), but fails on any call http.get () on 10 of BlackBerry. Initially, I had problems because I did not in the whitelist the URL I was trying to download, but after whitelisting now runs the get call, but always fails. The error message "cannot resolve the host name.

  Does anyone have an idea why angular is unable to resolve an external host name when running on BlackBerry 10?

  Never mind... my bad. I encounter this problem when running my Ionic/angular application on a simulator. For me to get always consistent on many simulators BB10 different IP addresses I've run, rather than to allow VMware Player feeding the DHCP server (because it does no reservations of IP), I run a TinyCore Linux server on the same virtual network as simulators, just so that I can use DHCP on the instance of TinyCore instead Allowing no reserves. Unfortunately, I did not complete the configuration of TinyCore properly so nothing on the virtual network becomes a valid gateway or the DNS server list to access the outside world.

  When I run my application on my Z10 physics, it works fine.

• A bit off topic-Virtual Hosting

  About ready to download my first site via FTP.

  Through the registration of my domain name, they asked me to get out of the virtual hosting.

  Have no idea what it means so in terms real simple anyone could explain to me what it is.

  Without knowing anything about your hosting service, it could mean anything. Most of the web servers run "virtualized" as in multiple servers running on a physical like directories computer are "virtualized" in the sense that the URL that you see are not necessarily the physical file and the structure of folders on the drives of the server, but it is not clear what you mean. If there is a configuration option specific to the page of your service provider, you will need to take with them most likely...

  Mylenium

• vSphere Client Ip address/host name

  Hello, newbie here.  I downloaded the vSphere client and in the process of setting up it request a host name or IP address in order to directly manage a single host.  I have no idea what hostname or IP address is it refers to.

  Thanks to all those who will respond to this newbie question.

  Yes, your esxi install on any of your virtual machine in your VMware Workstation during installation, you will get the details to specify a static ip address and once installed, when you want to manage this esxi in your vsphere client, that you must use the same username ROOT and password defined during installation and the IP address to connect through your vsphere client.

  Please mark this as correct/useful if that answers your query.

  Rgds

  Frédéric Sudre

• Help with a script. Need to host name, not the FULL domain name

  I'm trying to gather a workflow that will create a user in Active directory and then install SQL server using this account for the service.

  the format of the username I want is SQL_servername

  I use ' hostname = vm.guest.guestId; ' to remove the host name of the virtual machine, but it returns the domain (i.e. servername.domain.name) FULL name

  I tried various methods (rtrim, trim, righttrim, etc.) to remove the domain name to leave me with only the name server, but not appear to work.

  Is there a way of Orchestrator to delete the domain name, or is there another function, I should use to get the short server name.

  Thank you

  server = hostname.substring(0, hostname.indexOf("."));
  

• View saves the different host name in AD

  We run v5.3 Horizon in a vSphere 5.5 environment. Lately, I noticed that when I'm building a large pool, sometimes registered in DNS host names do not match the display generated on the virtual computer names. We use the clones related with a delete on logoff, no disk configuration persistent.  What components are involved in the disappearance of the name? It's between the composer and the agent of the view on the VM? I don't know how this could be getting screwed so intermittently.

  Finally, this problem disappeared for us. I believe that view 5.3.4 was ok and so far 6.1 also appears to not have this problem. I'm not 100% sure it was a problem of the Horizon, but that seems more likely.

• Can migrate a virtual computer to another virtual hosted by the same host computer?

  Deal all,

  I have two questions and I need your help.

  (1) I wonder if a virtual machine can be migrated to another virtual machine that are hosted by the same host ESXi 5.0? (The host has a local hard drive). If possible, how?

  (2) if I have two stand-alone ESXi hosts (host A and B), each host has DAS (local storage) respectively. If the VLC Player is running on a virtual hosted by host A computer and playing a video stream from the Internet, (it is not at all access local storage). This virtual machine can be migrated to host B? (Suppose vCenter is installed)

  Any response will be appreciated.

  Cheng

  You can clone this VM VM A i.e (require vCenter or vmkfstools allows you to clone the drive ONLY) and name VM B. do you want on original VM. Something happened to A VM, VM B you Savior.

  vStorage the device (here). It will use your local or DAS.

• Workstation 8: Upload failed: Curl error: could not resolve the host name

  I have workstation 8 connected to our ESX host, it shows all the machines and allows me to connect to their end. But when I try to copy/paste/drag and drop a local virtual machine over there he said "Vmware workstation 8: Upload failed: Curl error: could not resolve the host name.

  Someone at - he fell on this or have any ideas why this would be. I think that if it does not find the host name, I could not navigate or connect to my Virtual Center.

  Hello

  Whats is your ESX host name? I would recommend using with full ESX host name during the connection. You can connect to the ESX host using the host name, but to download the VM in this topic, you will need to use FULL of ESX host of domain name when connecting.

  Please try to do it and let us know if it solves your problem.

  Thank you

  Deep