Insert the statement with & in the chain

Similar Questions

• Error insert using statement with subquery and prepared partition

  	Connection Conn = null;
  		PreparedStatement stmt = null;
  		final StringBuilder lSql = new StringBuilder();
  		lSql.append ("INSERT INTO table1");
  		lSql.append ("(Colonne1, Colonne2, column_group, column_sequence )" ");
  		lSql.append ("VALUES");
  		lSql.append ("(?,?,?, (selection from table1 (PARTION column_group max (column_sequence) + 1)) " ");)
  		...

  the query was operating normally, the error occurred after you enter the code in red.

  Normally, I would ask: what error you are getting? And what channel the operation generates?

  But "select (...) over" ist lacks at least one feature after select: over clause is used for analytical functions and has the form: SELECT a_function() OVER (...) - and without the function I expect an error.

  Maybe:

  Select max (column_sequence) + 1 MORE (PARTION column_group) from table1

  might be what you want. At least it's a plausible use of the analytical function; but I guess she returns several rows and so it will not help in a clause of insert values.

• Insert the object into the table

  Hi all

  I would insert my type of object in a table without specifying the name of the variable.

  That's my bad example:

  create or replace type MY_TYPE_OBJ as object 
  (
    val1 number,
    val2 number,
    val3 number
  );
  /
  
  CREATE TABLE MY_TABLE of MY_TYPE_OBJ;
  /
  
  declare 
      myType   MY_TYPE_OBJ;
  begin
  
    myType := new MY_TYPE_OBJ(1, 2, 3);
  
    insert into MY_TABLE values (myType.val1, myType.val2, myType.val3);
    
  end;
  /
  
  

  As you can see, on my last procedure, I had to use the insert into statement with val1, val2, val3 name filed.

  Is there a quicker way to insert an object into a table? In the production environment of the object type that almost 100 filed is not so friendly to write each one by one.

  Thank you

  Federico

  Example:

  SQL> create or replace type TFoo as object(
    2          attr1   integer,
    3          attr2   varchar2(10),
    4          attr3   date
    5  );
    6  /
  
  Type created.
  
  SQL>
  SQL> create table footab of TFoo(
    2          attr1 primary key,
    3          attr2 not null
    4  ) organization index
    5  /
  
  Table created.
  
  SQL>
  SQL> declare
    2          foo     TFoo;
    3  begin
    4          foo := new TFoo( 1, 'test1', trunc(sysdate) );
    5          insert into footab values foo;
    6  end;
    7  /
  
  PL/SQL procedure successfully completed.
  
  SQL>
  SQL> select * from footab;
  
       ATTR1 ATTR2      ATTR3
  ---------- ---------- -------------------
           1 test1      2014/08/27 00:00:00
  
  SQL>
  

  I agree though - be careful with tables of objects and now their technical implementation and advantages and disadvantages.

• Insert the problem with the statement

  case 1:

  declare
  Start
  Insert into t4 values (1);
  commit;
  Insert into t4 values ('test');
  commit;
  end;

  invalid value 1 of 1 line inserted with no identifier;

  case 2:

  declare
  Start
  Insert into t4 values (1);
  commit;
  Insert into t4 valuess ('test');
  commit;
  end;

  any line not inserted value 1 with invalid identifier;

  question is why difference between over case

  Hello

  Jhon says:

  Thnaks for the previous comment.

  Update Q4 set c1 = c1 * 2;   Why this statement fail while we and rename c32 column c1-exceute immediate statement

  If, at the time of compilation, the single column of the table is c3, the UPDATE statement will not compile.  So really, you must change the name of column in PL/SQL, then use EXECUTE IMMEDIATE to do the UPDATE.

  This is an example of why create or modify tables in PL/SQL is a bad idea.

• SQL statement error INSERT The conflicted with the FOREIGN KEY constraint

  I recently installed a reporting for vmware vsphere software, but I get a SQL error. I opened a request for assistance with vmware, but so far they have not come up with a solution. The error is caused by: com.microsoft.sqlserver.jdbc.SQLServerException: instruction INSERT The conflicted with the FOREIGN KEY constraint 'FK_CB_VSM_NETWORK_VC_ID '. The conflict occurred in database 'VCChargebackVCC02', table "dbo." " CB_VSM_SERVER', column 'VC_ID '. I don't know a lot about SQL, so I'm lost in the extent of troubleshooting is concerned. If anyone has any ideas I'd love to hear them.

  SQL questions are better posed on Technet.  They are better equipped to manage the

  http://social.technet.Microsoft.com/forums/en-us/categories/

• Select statement with single quotes in the insert statement

  Dear Sir
  
  What's the trick to cover this issue:
  
  Insert into TEST_TABLE (SQL_SCRIPT_ID, SQL_SCRIPT)
  values ("1", "select count (*) from the SOURCE where SOURCE.") VALID = 'Y')
  
  because of the single quotes, I get an error and can not insert, the script works, is there a workaround somehow?
  
  Thank you 1 million,
  
  Erik
  
  Published by: 845498 on June 13, 2012 04:15

  create table testsql(script_id number,sql_script varchar2(1000));
  
  insert into testsql (script_id, SQL_SCRIPT)
  values (1, 'select count (*) from SOURCE where SOURCE.VALID = ''Y''');
  

• Using a control of the chain with the Enter key, return * and * allowing repeated identical entry

  Hi all

  There must be a simple solution for this, but it's Friday afternoon, and my brain is not cooperating.

  I create a simple terminal through which a user can interact with an instrument. My question is about the only query string control. The button send and the Terminal Table are here for reference.

  

  Here is my desired behavior:

  (a) the user types a command in the field of the query, tape input or return. An event is triggered, and the request is sent to the instrument. The focus remains on the field in the query.

  (b) with any other action the interface user, the user types Enter or return again and again, by triggering an event that sends the request to the instrument every time Enter or return is typed. The focus remains on the field in the query.

  Here's what I have:

  

  This allows for one), but fails to b). The reason is, because the value of the field in the query has not changed, change value event does not fire when the user starts to spam keys enter or return. There is a way around this, as suggested by this post. Here is the solution in a few words:

  

  Instead of looking for the change in the value of the query command, the event fires for each key event to the bottom of the control and resembles a pressure of enter key or return. What attracts the user action, even if the content of the field of the request have not changed. The problem with this approach is that, when this event fires, I need to read the value of the query string order and send it to the instrument, but the value I get via the local Variable query is the old value, probably because the key down event fires before the value of query is saved as changed. Is there a way to programatically "enter" the contents of the control channel so it is recorded as a change in value, until I have the question via a local Variable? Is there a different way I should go about it? I'd rather not do anything that bound the input keys or return to this particular area, since I have many other UI elements that need these keys in my program.

  If not, is there a way to make the control of the fire 'Change of value' query string event when the user presses enter or return even if the value has not changed?

  Thank you for your comments!

  I thought about it.

  (1) control of the string (query) a value of update while typing.

  (2) save the key event down to the control of the chain. If the entry or return was pressed, send the state machine to the State 'send request '.

  

  (3) in the application 'send' State read control channel via the local Variable value.

  

  This is the desired behavior to allow the user repeatedly hit entry or return to regularly send a command, and the user can also type in a new order and send it by pressing enter or return.

  Thanks to all who have helped me this something to think about!

• The chain is be ignored and need help with why?

  Hi all.

  I hope again with help from the community.

  There is a chain created (code below) and it runs with success - at least she built MOST of the tables.

  The problem is: the last three tables all rely on the same condition and only two of them pass.

  The code below, step 4, steps 5 and 6 are all dependent on the success of step 3.

  When work for this string is executed, all stages of execution fails with the exception of step 5.

  The interesting thing (to me at least), is that regardless of the generation of the table is step 5 fails.  For example, in the code below prog_Y is attributed to step 5 and it fails.  If I swap prog_Y to step_4 and prog_X to step_5, step_5 still does not work.  Same result if prog_Z is listed as step 5.  While steps 4 and 6 to run correctly.

  Further info in job run lists of details: table or view does not exist.  However, I confirmed the procs behind programs every summer executed successfully and the tables exist.

  I tried several things to get more information: change the numbers.dropping/redefining step leaving down the chain and redefine, retype the steps and rules.

  Help, please.  Suggestions of why this step 5 may be at fault or where to find more information is super useful.

  Thank you very much

  Fritz

  When the string is executed partially

  /* 1. Create the string * /.

  BEGIN

  () dbms_scheduler.create_chain

  CHAIN_NAME = > 'dgr_cmpl_chain ',.

  RULE_SET_NAME = > null,

  EVALUATION_INTERVAL = > null,

  Comments = > 'Chain that loads tables of degree completion.');

  END;

  /* 2. Define the steps of the string * /.

  BEGIN

  DBMS_SCHEDULER. () DEFINE_CHAIN_STEP

  chain_name = > 'dgr_cmpl_chain ',.

  step_name = > "step_1".

  program name = > 'prog_intrmdt_1');

  DBMS_SCHEDULER. () DEFINE_CHAIN_STEP

  chain_name = > 'dgr_cmpl_chain ',.

  step_name = > "step_2"

  program name = > 'prog_intrmdt_2');

  DBMS_SCHEDULER. () DEFINE_CHAIN_STEP

  chain_name = > 'dgr_cmpl_chain ',.

  step_name = > "step_3"

  program name = > 'prog_base');

  DBMS_SCHEDULER. () DEFINE_CHAIN_STEP

  chain_name = > 'dgr_cmpl_chain ',.

  step_name = > "step_4"

  program name = > 'prog_X');

  DBMS_SCHEDULER. () DEFINE_CHAIN_STEP

  chain_name = > 'dgr_cmpl_chain ',.

  step_name = > "step_5"

  program name = > 'prog_Y');

  DBMS_SCHEDULER. () DEFINE_CHAIN_STEP

  chain_name = > 'dgr_cmpl_chain ',.

  step_name = > "step_6"

  program name = > 'prog_Z');

  END;

  /* 3. Add rules * /.

  BEGIN

  DBMS_SCHEDULER. () DEFINE_CHAIN_RULE

  chain_name = > 'dgr_cmpl_chain ',.

  State = > 'TRUE ',.

  action = > 'START step_1. "

  nom_regle = > 'rule_1. "

  Comments = > 'String degree start.');

  DBMS_SCHEDULER. () DEFINE_CHAIN_RULE

  chain_name = > 'dgr_cmpl_chain ',.

  State = > "step_1 succeeded."

  action = > 'START step_2. "

  nom_regle = > "rule_2");

  DBMS_SCHEDULER. () DEFINE_CHAIN_RULE

  chain_name = > 'dgr_cmpl_chain ',.

  State = > "step_2 succeeded."

  action = > 'START step_3 ',.

  nom_regle = > 'rule_3');

  DBMS_SCHEDULER. () DEFINE_CHAIN_RULE

  chain_name = > 'dgr_cmpl_chain ',.

  State = > "step_3 succeeded."

  action = > 'START step_4 ',.

  nom_regle = > 'rule_4');

  DBMS_SCHEDULER. () DEFINE_CHAIN_RULE

  chain_name = > 'dgr_cmpl_chain ',.

  State = > "step_3 succeeded."

  action = > 'START step_5 ',.

  nom_regle = > 'rule_5');

  DBMS_SCHEDULER. () DEFINE_CHAIN_RULE

  chain_name = > 'dgr_cmpl_chain ',.

  State = > "step_3 succeeded."

  action = > 'START step_6 ',.

  nom_regle = > 'rule_6');

  DBMS_SCHEDULER. () DEFINE_CHAIN_RULE

  chain_name = > 'dgr_cmpl_chain ',.

  State = > ' completed and full of step_5 step_4 and end step_6 "

  action = > "END."

  nom_regle = > 'rule_7');

  END;

  /*

  */

  /* 4. Select the string * /.

  BEGIN

  DBMS_SCHEDULER. SELECT ("dgr_cmpl_chain");

  END;

  /* 5. Create a job that points to the string. */

  / * Wizard of work used to create jobs * /.

  Thanks a lot for your suggestions.  Very grateful.

  Looks like this may have been a self-inflicted error.

  There were a few other errors which confuse this explanation.  But today, this seems to be the most likely case.

  The END condition was initially step completed 6.  Turns, then step 3 successful, all the steps 4, 5 and 6 began at the same time.  Well, step 6 was shorter than the 5 step execution time.  So step 6 would end, and the end to trigger the end of the string before step 5.

  This worked constantly since the END condition has been updated in order to assess the steps, 4, 5 and 6.

  Fritz

• Insert the problem using a SELECT table with an index by TRUNC function

  I came across this problem when you try to insert a select query, select returns the correct results, but when you try to insert the results into a table, the results are different. I found a work around by forcing a selection order, but surely this is a bug in Oracle as how the value of select statements may differ from the insert?
  
  Platform: Windows Server 2008 R2
  11.2.3 Oracle Enterprise Edition
  (I've not tried to reproduce this on other versions)
  
  Here are the scripts to create the two tables and the data source:

  CREATE TABLE source_data
  (
    ID                 NUMBER(2),
    COUNT_DATE       DATE
  );
  
  CREATE INDEX IN_SOURCE_DATA ON SOURCE_DATA (TRUNC(count_date, 'MM'));
  
  INSERT INTO source_data VALUES (1, TO_DATE('20120101', 'YYYYMMDD'));
  INSERT INTO source_data VALUES (1, TO_DATE('20120102', 'YYYYMMDD'));
  INSERT INTO source_data VALUES (1, TO_DATE('20120103', 'YYYYMMDD'));
  INSERT INTO source_data VALUES (1, TO_DATE('20120201', 'YYYYMMDD'));
  INSERT INTO source_data VALUES (1, TO_DATE('20120202', 'YYYYMMDD'));
  INSERT INTO source_data VALUES (1, TO_DATE('20120203', 'YYYYMMDD'));
  INSERT INTO source_data VALUES (1, TO_DATE('20120301', 'YYYYMMDD'));
  INSERT INTO source_data VALUES (1, TO_DATE('20120302', 'YYYYMMDD'));
  INSERT INTO source_data VALUES (1, TO_DATE('20120303', 'YYYYMMDD'));
  
  CREATE TABLE result_data
  (
    ID                 NUMBER(2),
    COUNT_DATE       DATE
  );

  Now, execute the select statement:

  SELECT id, TRUNC(count_date, 'MM')
  FROM source_data
  GROUP BY id, TRUNC(count_date, 'MM')

  You should get the following:

  1     2012/02/01
  1     2012/03/01
  1     2012/01/01

  Now insert in the table of results:

  INSERT INTO result_data
  SELECT id, TRUNC(count_date, 'MM')
  FROM source_data
  GROUP BY id, TRUNC(count_date, 'MM');

  Select the table, and you get:

  1     2012/03/01
  1     2012/03/01
  1     2012/03/01

  The most recent month is repeated for each line.
  
  Truncate your table and insert the following statement and results should now be correct:

  INSERT INTO result_data
  SELECT id, TRUNC(count_date, 'MM')
  FROM source_data
  GROUP BY id, TRUNC(count_date, 'MM')
  ORDER BY 1, 2;

  If someone has encountered this problem before, could you please let me know, I don't see what I make a mistake because the selection results are correct, they should not be different from what is being inserted.
  
  Published by: user11285442 on May 13, 2013 05:16
  
  Published by: user11285442 on May 13, 2013 06:15

  Most likely a bug in 11.2.0.3. I can reproduce on Red Hat Linux and AIX.

  You can perform a search on MOS to see if this is a known bug (very likely), if not then you have a pretty simple test box to open a SR with.

  John

• Insert the statement Question

  I'm trying to insert a set of values in a table where one of the values necessary for inclusion is identical to the auto-generated primary key. I am not currently insertion of the value for the primary key because it is generated automatically. Given that I'm not insert the value of the primary key, is anyway to set another value inserted on the same primary key value?
  
  For example:
  
  insert into ent_config.device (created_dt, created_tz, created_by_seq, modified_dt, modified_tz, modified_by_seq, enterprise_seq, clinicals_organization_seq, facility_id, dept_id, hostname, tty_id, process_num, device_name, device_status, device_type, loc_type, netbios_id, db_name) values (sysdate, 'IS', '106303', sysdate, 'IS', '106303', '5001', '5035', '9', '19', 'phslnx020', 'P12320', ' 2099', 'PC', 'ON_LINE' "cv220") (, 'NUR', * '2736' *, 'ALL');
  
  The primary key for this table is called device_seq which is generated automatically and must be unique which as you can see from the above insert statement is inserted, and the netbios_id must be set to the same value when inserting.
  
  No idea how I could go to do this?

  Hello

  Welcome to the forum!

  When you say that device_seq is 'auto generated', do you mean that there is a trigger that provides this value? (I assume you are using a sequence, but it probably does not matter in this issue). See if you can change the trigger. If netbios_id is always the same as device_seq when you INSERT (but can be changed by updates later), then it is very easy. Otherwise, you may need to designate some specail value (as - 9E9) which replaces the trigger with the same value that it used to device_seq.

  Change the trigger is the only good way I can think of that. If you can't touch the existing trigger, you might be able to add a new trigger, but it would be more complicated and less effective.

• Insert the record with the decimal string?

  I want to insert a record with commas, as the below:
  

  INSERT INTO TABLEA(CITY) VALUES('ALBANY,NEWYORK,TROY')

  Is there a way we can insert commas in the table?

  This statement has been inserted

  What is your question.

  SQL> INSERT INTO TABLEA(CITY) VALUES('ALBANY,NEWYORK,TROY') ;
  
  1 row created.
  

• Insert the select statement result in CLOB

  Hi, I would like to insert the result of a statement select into a CLOB with a trigger.
  
  Whevner a number is registered my research to trigger how often the number is used in several objects and now my problem I also would like to know the record ID where the number is used.
  
  SELECT 'ITEXT '.
  OF 'CHECK_INR '.
  WHERE 'USE' > 1
  
  This select records of results 2 How can I insert the result into a CLOB with my trigger?
  
  Thanks in advance

  Steven,

  It's really a question better suited for another forum because it is not really associated with ApEx. Also, something tells me that you really want to do an UPDATE not an insert. However, here's a quick example...

  DECLARE
  
     l_orders VARCHAR2(4000);
  
  BEGIN
  
     FOR x IN (
        SELECT *
        FROM my_orders_table
     )
     LOOP
        l_orders := l_orders || ', ' || x.order_data_column;
     END LOOP;
  
     l_orders := l_trim(l_orders, ', ');
  
     UPDATE some_table
     SET some_column = l_orders
     WHERE id = some_id;
  
  END;
  

  That's the key. Use VARCHAR2 unless you need CLOB.

  Kind regards
  Dan

  http://danielmcghan.us
  http://sourceforge.NET/projects/tapigen

• I downloaded a windows file. I want to work with the document. I want to insert the information. How can I do this

  How can I work with a pdf file of windows? I want to insert the information. Edit the file etc.

  You may be lucky with select all > copy > paste into a new document in a robust word-processing or text-editing application

  A PDF is designed to be READ (for the most part)-only "areas" can be "filled" and printed/saved

  After the first, you can then save it as a PDF from the application you are using - usually the function print rather than the Save as function

• -Pop-up message: insert the CDROM with the virtual truck program

  When I start my computer, a message is displayed as below;
  Please insert the CD-ROM with the virtual truck program. Looking for file: D:\installs\PaceEth\VTruck.exe
  Can someone please guide me to get rid of him.

  This application did not work for me but I google and found out that the virtual truck Installer is a program that enhances the Internet connection on a point to point protocol over Ethernet (PPPoE) line.
  This problem may occur if the virtual truck program that is installed on your computer is damaged or missing files.

  To resolve this problem, use the following methods: http://support.microsoft.com/default.aspx?scid=kb; EN-US; 829714

  I hope this helps.

• Some parts of the chain has lost communication with the Arduino.

  Everything by contacting arduino, the chain that I receive from the arduino is buffered, but it is not completely read by LabVIEW

  and change the data to trace some information is lost. Someone knows how to fix this?

  Information may be useful:

  Arduino mega

  Baud rate: 19200

  Delay in the Arduino loop: 10 ms

  The string is composed of 3 integers values concatenated like this:

  gh123ab123cd123ef

  I m attaching the Vi.

  Thx a lot!

  Paulo

  Is your waiting time in fact 0 milliseconds?  It is not very long wait for a message to come.

  Each message ends with a line as a termination character newline character?  You have the default stop character.  If Yes, then you're better to read a large number of bytes and let the end of termination character read, rather than using "bytes to the Port.  So now that you read, not all bytes have arrived yet, then you're bytes to the port will be less that you really want and you'll have the wind reading an incomplete message.

• Changing a property of an indicator of the chain in a cluster with a sub - VI

  I know that the issue of the update of an indicator on a first level VI of a Subvi has been requested before on the discussion Forum, but my question is slightly different, because I want to update the property of an indicator, not necessarily its value.

  In my first level VI, I have a group that contains some indicators of the chain.  The cluster is a typedef.

  

  I want to change the background color of the indicator for red or green of my sub - VI string so that it looks like this:

  

  Creating a reference to the cluster and move to the Subvi do not seem to work.  I'm not able to see the Text.BGColor property to change the background color of the string indicators:

  

  It seems that the creation of a reference to a string indicator and switch to the Subvi might work like this:

  

  Is there a way to better/more elegant to do this? Do I have to create a reference of string for each string in my cluster and send it to my sub - VI?

  I've messed around with global variables, but not luck.

  Plese help.

  You have the right idea.  The cluster reference has a property called [orders].  Which returns an array of references to all the controls in your cluster.  Indexing of those who have properties BGColor, that you need.