Inserted video question

Similar Questions

• Insert the video question

  Hello.
  
  I have inserted video without problem and now trying to get the first image to show an image that I made (the first current image is black on pageload, which looks bad). Can someone tell me how can I do this?
  
  Thank you!
  
  -Derek
  
  CEO, fishing Shimano

  DW cannot add a poster to your video frame. You need to make your project
  in Flash for it.
  http://monkeyflash.com/tutorials/poster-frame-for-Flash-video/

  --
  Nancy O.
  ALT-Web Design & Publishing
  www.Alt-Web.com

• Cannot publish projects with the inserted video - video The Flash error message cannot be loaded

  I created a Captivate 6 project with two blades which have inserted videos in their

  The two videos were created in Captivate 6 by publishing these projects as the mp4 videos

  They play very well in previews, but when I get the error saying Flash video can not be charged for two of these slides and in the output files, the video field is empty.

  I checked that videos are not open everywhere else that I saw on a previous post, that was the question, but the only place where they are in use is part of the project, I am trying to publish.

  Here are my settings and the error message

  

  Any suggestions would be greatly appreciated.

  Your screenshot shows that you publish in a folder on a network drive.

  You have:

  • Check if the movie file exists in the location of the published folder? (It should ideally be sitting in the same folder as the SWF file calling it.)
  • Check that the location of the folder is defined as a location approved in your Flash Global security settings?

• How can I insert videos into parts of a still image?

  I wanted to create a surreal work for my University project but I'm absolutely stumped on how to do it and Googling was useless, so maybe I don't am not denominated right or other. Basically, I want to insert videos in some parts of my photographs. for example, in this image, I joined Internet for example I would choose around where the trees are in the puddle of water and place a video here to say a few fish swim around? Preference on Photoshop if Possible but if not possible, that's fine. I saw people doing photographs of televisions and video on the TV screen moves but the TV itself is always. Sorry I'm not good at explaining, but I hope someone can help

  I made a small example with Premiere Pro

  

  Just cut the pieces you don't want on the photo using Ps, save with a transparent background (png, for example;), put in first and put the fish behind the photo

• Just insert video in muse

  operating instructions non trovo insert video in muse

  In addition, you can refer to the following example discussion: Re: integration of video in Muse

  Kind regards

  Akshay

• for the first time using the do not know how to insert video to start editing

  for the first time using the do not know how to insert video to start editing

  First thing you need to know is that After Effects is not a video editor. First is to put some shots together to tell stories (that is changing), After Effects for creating those shots (compositing and Visual effects) and to create animated graphics.

  To use AE, start here: starting After Effects

• Do not insert video track

  I have a problem inserting video tracks in Adobe Premiere Pro. When I use the insert feature, the audio track is inserted, but it isn't the video track. The only work around to get the video in the timeline is using the function "New sequence of the Clip" - but it is not very convenient. Thank you!

  Ok.

  Don't forget the source patch is set correctly.  You can read about it in the help file.

• Impossible to loop inserted video flash

  I struggled for more than a week to just get a flash inserted video to loop. I feel there is a conflict of command but I can't like the flash video is embedded with an order is not a loop before be inserted in Dreamweaver. I can insert and loop an animation GIF, probably because the loop control is incorporated in the GIF file. But if I convert the GIF to AVI sequences to edit in After Effects or first and then either FLV and SWF in Flash, I can not Dreamweaver for the video loop. When I insert the SWF file, checking that the loop and auto run function allows automatic playback, but not in the loop. I tried to manually add the code (param name = "LOOP" value = "true" >) without success. When I insert an FLV I checked the auto play and auto rewind without success. Html documents are completely empty before inserting the flash object.

  Using configuration number of loop in the menu of footage in After Effects interpret doesn't that add images to video which is the same as /pasting, the file just copy grows. I use Firefox and Explorer 8, someone told me the video loops seen in Safari, is - it possible contradictory code embedded in the flash video can not be read by Safari? Is there something I don't when you export to Flash?

  Any help would be greatly appreciated I'm about to give up.

  Thank you

  Paul

  Flash on the last picture use gotoAndPlay actionscript (1); to make the swf loop.

• First do not insert audio track when inserting video clip

  I just got the 2015 CC (updating FCPX) first of the trial about 10 days ago and so far I love it. I ran into this problem when I insert a video in an audio clip with her is not in the sequence. I made sure that the video contained audio and he did. I even re-inserted a clip I had previously entered with the audio, and this same clip was not inserted with audio.

  Here's a video for a better explanation of my problem: first question? -YouTube

  Any help will be great!

  Thank you.

  You forgot to patch source audio track.

  

• MBP 17 inch 2.5 GHz end 2011 video-questions

  Good day to you all.

  Confusion serious, for me anyway.

  There are and have had problems with the AMD Radeon HD 6750 M and HD 6770 M graphics cards. Suddenly distorted video, random reboots, odd shaped and colored stalls artefarcts etc., in the start of the end.

  I happen to have one of those affected Mbps, a late 2011 model, 17-inch core i7, 2.5 GHz, the model identifier MacBookPro8, 3, model number A1297, EMC 2564. It's still fully usable, nothing wrong, but who could, not necessarily expected or, will come to an abrupt end as many owners, some of my friends have known and display these columns.

  The site of Apple "MacBook Pro repair Extension program for video Issues" (https://www.apple.com/support/macbookpro-videoissues/), I learned:

  products concerned:

  • models of MacBook Pro 15 inch and 17 inch made in 2011.

  • MacBook Pro 15 inch with retina models made from mid-2012-beginning 2013

  I walked to my S/N MBP, it turns out that my MBP is no longer covered.

  MacTracker 7.5.5 I learn that the MBP A1297 introduced in October 2011 and abandoned by June 2012.

  Repair of Apple (for models non-retine) program talks about the models made in 2011.

  My question: how about the models made between January and June, 2012?

  Something has been changed or modified in order to get rid of the problems of graphics cards? Something like, say, update motherboard, graphics, a radiator, redesigned, more powerful fans?

  For me, it's quite confusing, via this link www.chipmunk.nl/klantenservice/applemodel.html, I discovered that my MBP 17 inch out of the Assembly line the 5th week of 2012, factory C0, Quanta Computer China. I'm not the first buyer, I don't know who it was, or when it was first purchased.

  What I worry, in other words is my MBP 'off-the-hook '?

  Could someone shine some light in this?

  With sincere greetings from continental Europe

  Khalid Hoogenbos

  The original questions developed in some 2010 models with integrated graphics discrete AND who uses graphics switching. These have proved to finally have a DEFAULT MONSTER - a defect in the graphics chip itself. The problem was there from the moment when they were built, but itself has failed, until these Macs have been highlighted or installed the latest versions of Mac OS X.

  In order to determine what was causing the growing pile of bad mothers replaced the field, Apple has developed the video switching Test (VST).

  Trying to continue studying these issues, other issues appeared in some 2011 models. These were not the same hidden defects in the chips, but Apple has never revealed exactly what they were.

  Some users suggested that they might have been problems with the excessive heat generated or process, such as the exact used solder type, or the amount the technique with which it has been applied, or all of this and more. You must be certain that all relevant updates have been applied, (if any) that these may affect cooling fan control.

  When you see a reminder that is limited to a certain period of time, you can generally be assured that if your Mac does not fall within the time limits stipulated it is simply NOT submitted the issues addressed in the callback.

  To be eligible for the reminder, your Mac must strictly comply with ALL requirements. It is a very small subset of users whose MacBook Pro of the time period appropriate have additional problems and will not start. They are NOT eligible for the free motherboard replacement, because they can not run (and therefore may not) the VST test.

• Cannot insert (video loop while VI)

  Hi all

  I'm building a VI to count the fringes of an interferometer using a video camera of Thorlabs 1645C (with the VI UC480). The intention of VI is to count time passing a certain pixel fringe and to do this, I need a counter threshold. As can be seen in the screenshot, video array is first reduced to a single pixel (using a slider) to get a 256-bit integer that indicates the levels of gray. This gray scale should trigger an account each time it passes a certain value, but the threshold detector resets whenever the grayscale value dips below the threshold. I tried to use while loops (and other loops of types), but in these cases the video play not at all, making it useless VI. When you use the other fixtures, however, as one set, the count will be just continue to rise as long as the grayscale value is greater than the given threshold, or it is not at all.

  After a week and a half of trying, I am ideas. Could someone please help?

  Next time, I have a question, I'll post an excerpt, but since this VI needs a specific camera, run, I was thinking that showing the complete VI would not be useful.

  I think I found the solution well! (It seems to work because as far as I know)

  It turns out that I needed a bigger? block instead, in which the feedback loop has a high value for an iteration unique 'loop' (which is strange, because I have used almost the exact same set-up, but instead of the threshold detector VI, I used a Boolean value, which has been without success).

  I added a screenshot because it seems more convenient than adding a VI (due in part to compatibility etc.)

  Thanks for all the comments

• Embedded flash/html5 video question

  Hello

  I was wondering if anyone can help.

  1 - is possible to play videos html5 without OS 2 controls showing next to clock (I know that I can display controls in the player in the app itself)

  2 - during playback of video flash from a playbook remote address (e.g. youtube) stays on, if I integrate swf file locally playbook goes out (backlight & Eve) even if the video game. Is it possible to keep the playbook on playback of local swf files?

  hope that makes sense, thanks for any help... Since faffing around everyday.

  Gwil

  Don't know what version of device/OS refer you to but for PB or BB10 to answer question 1: right now it seems that we will see the same functionality to implement controls in the bar near the clock, PB and BB10. Maybe an OS, PB, inspires others, BB10? I also think that the HTML5 media API should follow the implementation of devs, so if you set the

  HTML5MediaObject.controls = false;
  

  It should also display the controls in the top next to the clock bar. I think it would be a good point to file a feature request for the repo for PlayBook or BB10.

  2nd Mmmh), has never worked with flash on mobile and I can not wait day for audio/video flash is chased out of the mobile OSs since HTML5 media is already there. On the other hand, this looks like a bug to me. Perhaps, you must also file a report with the framework of PB?

• I am a student in learning Dreamweaver and for our first sensitive assignment, it must include a sensitive video of YouTube.  I don't use a Bootstrap - I simply uses percentages to make sensitive elements.  I was able to insert video but cannot

  I am a student in learning Dreamweaver and for our first sensitive assignment, it must include a sensitive video of YouTube.  I don't use a Bootstrap - I simply uses percentages to make sensitive elements.  I was able to insert the video but can't make it sensitive.  I guess I should put a div around the iframe and make this 100% div width/height auto but apparently that's not true, because that does not affect the video.  Thank you very much.

  Any advice will be greatly appreciated!

  Here's a good page that goes into how to make a sensitive youtube embed video...

  Video fluid width

• Failed to insert video in the timeline? Perplexed...

  Hi all

  as a quick check has not revealed a similar problem, I am autonomous detachment. Sorry if this has already come up before. in any case...

  I use the last first Pro CC on a mac and I have a recurring issue where I am unable to introduce some video files in the timeline. As I remember, it has nothing to do with a specific format (I may be wrong, however), but here's what's happening. In general, I import a new batch of video files into a project and then, when I try to drag in the timeline, it simply doesn't let me. Tried dragging from the preview screen, using the video icon under him, all I could think off. Even more, I can't click with the right button on the video and turn into a new sequence. Previously when this happened, I usually solve it by dragging in one of the other sequences, until one of them accepts it (based on no criteria seems to me). From there, I can copy/paste in the designated order. Hilarious things. Anyway, this time, none of the existing scripts accepts these files and I am out of options (not to mention the time).

  FYI - the bar more left of video in the timeline (V1 - Vx) is checked, it is not the standard pickle. Also, I can right click and edit and do what I want with all the other files, it's just the specific files I can import at one time. This never happened before the last update, at least not for me. The file in question sinned this time are Quicktime ProRes video files, no sound, but I'm sure that it happened with a couple of other types of codec, however for most of the QT containers, I guess.

  Thanks for your time, I hope someone can help with this.

  Alex

  Quick follow-up. Just, I solved the problem by clearing the sequence in and out points. Let me repeat that - compensation the previously settled points within a sequence that doesn't have nothing to do with the video in question allowed me to right click on the files in the project tab Oh, also, before I 'solved' and output whenever I saw these video files in the window preview and right-click on them happened Premiere Pro would crash. And now, after erasing the In/Out in random order, which, as far as I know, has nothing to do with me the preview of a file in the preview window, it doesn't crash anymore. Everything works perfectly. Don't not to mention that, when I cancel the In/Out clearance, he'll be right back to break and ignoring the video files. I mean, my boy, that it is simply priceless. ++++

  Would much like to know what causes a particular problem, so I would be grateful for any comments on this subject.

  Alex

• Registration form via Captivate or inserting video in captivate

  Dear community!

  I made a recording of the screen, about 30 sec with Quicktime Player. This video (.mov) I want to insert in my Captivate 8 E-Conference. I want it to start automatically when the slide in the Conference is reached.

  It is now .mov is not possible with captivate, so I changed it to .flv. But the quality is quite bad and also after the publication of my E-Conference there are problems, the video does not play or you play the video.

  I do also registration form through captivate? If not, what is the best way to insert a video in a conference-E? Is there a possibility that the video starts automatically with the slide? I Don t want to look like a video, I want the person who looks at the conference E-think it's a normal blade. Is this possible?

  Sincerely

  Thomas

  You have the possibility of video recording demo, which translates a file cpvc

  You can insert on a slide in a project cptx. Demo video has a dedicated

  Editor-in-Chief of pan/zoom and to insert static objects, transitions etc.