Insertion of media in the disc Menu

Similar Questions

• Windows 7 Media Player interrupts playback to change the media when the disc (not AutoPlay)

  Media player stops the current playback and start playback of a CD/DVD media when inserted.  It's not Autoplay - AutoPlay dialog box appears in addition to changing media WMP.  There seems to be a switch on the menu Options to control this behavior.  How do I turn it off?

  Amazing that it is still ongoing!  I came across this thread, because I used dbpoweramp to copy the CD while he was trying to watch some training videos (WMV) in WMP12 (Win7 Pro, 64-bit)

  Whenever I put in a CD Ripper, WMP has STOPPED playing the video and ON it's OWN would bring the CD to play.  WHAT?

  Automatic change to AUTOPLAY, AUTORUN, RIP settings have no effect. Those who point to them did not read even two or three posts here.  Sigh.

  It's too bad that the old days of RealPlayer and Quicktime!  Networks of Nice RealPlayer that many died because of their heavy handed tactics!  Even apple supported some of their heavy handed ways (iTunes is still a CPU hog!)  It is a horrible BUG in WMP.  Yes, it's a BUG if someone calls is a characteristic or not.

  Her trying to get around now is to watch the video in SKIN mode.  This BUG does not show his head.  The BUG will appear if I watch the video in mode 'Now Playing'.

  Man, it's bad for MS REALL.  More than two years and they cannot even acknowledge the problem.  Sigh.

• When I drag imessage photos in iphoto, it shows that they give, but then I can't find photos in iphoto. and when I open the finder there is no option of 'media' in the side menu.

  Could not find photos in iphoto after drag / drop imessage

  Correct, there is no media browser in the finder - only for download or open or install windows

  They show in the last import? check your type of event - they are probably n = just not where you are looking - in the last import done right click on one and show events - an event should open with your photo display - if not arrive then back up your iPhoto library and hold down the option and command keys at the launch of the iPhoto and repair permissions hen rebuild the database

  LN

• When I RIP and burn music with windows media player the disc will only playback on computer

  I must have the wrong settings on my functions to rip/burn because the music, put on the disk is reproduced on my computer, but not my cars, stereo system. When I read the file for each song extension, the extension is "wpl" what are the correct settings for a retry? Windows xp.

  I must have the wrong settings on my functions to rip/burn because the music, put on the disk is reproduced on my computer, but not my cars, stereo system. When I read the file for each song extension, the extension is "wpl" what are the correct settings for a retry? Windows xp.

  ==================================================
  The .wpl files are probably Windows Media Playlist files... not real music files.

  Here is some info on the .wpl files:

  WPL file extension
  http://www.downloadatoz.com/file-extensions/wpl-file-extension.html

  File extensions on the Audio CD (music) that will play in a CD player must be CDA.

  The following link might be worth a visit:

  Windows Media Player 11
  for Windows XP
  Burn your own custom CDs
  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/HOWTO/MP11/burn.aspx

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to add "Add to selection windows media" to the context menu of the Explorer in Windows Vista 32/WMP 11?

  Hello. I am currently looking for a way to queue files flv and mp4 in WMP 11 in Windows Vista. I used to be able to do with Shark007 Windows Vista installed Codec, but I recently replaced it with a combination of ffdshow, Haali Media Splitter and open source Flash Video Splitter; This combination has been recommended as being superior to my old codec pack.

  I found a similar topic and solution, for Windows 7 / WMP 12:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-sound/how-to-add-add-to-Windows-Media-playlist-to/eb5ff6a0-5260-47de-903F-00bca38edc14

  Someone knows how to adapt the solution here for use with Vista?

  Copy-paste all below into Notepad and save it as FLVMP4Enqueue.reg. Then double-click on this file to add it to the registry. After that, you may have to reassociate the FLV/MP4 files with WMP, via Control Panel - default programs .

  -----------------------

  Windows Registry Editor Version 5.00

  [HKEY_CLASSES_ROOT\.flv]
  @= "flvfile.

  [HKEY_CLASSES_ROOT\flvfile\shellex\ContextMenuHandlers]

  [HKEY_CLASSES_ROOT\flvfile\shellex\ContextMenuHandlers\WMPAddToPlaylist]
  @= "{F1B9284F-E9DC-4e68-9D7E-42362A59F0FD}".

  [HKEY_CLASSES_ROOT\flvfile\shellex\ContextMenuHandlers\WMPPlayAsPlaylist]
  @= "{CE3FB1D1-02AE-4a5f-A6E9-D9F1B4073E6C}".

  [HKEY_CLASSES_ROOT\.mp4]
  @= "mp4file".

  [HKEY_CLASSES_ROOT\mp4file\shellex\ContextMenuHandlers]

  [HKEY_CLASSES_ROOT\mp4file\shellex\ContextMenuHandlers\WMPAddToPlaylist]
  @= "{F1B9284F-E9DC-4e68-9D7E-42362A59F0FD}".

  [HKEY_CLASSES_ROOT\mp4file\shellex\ContextMenuHandlers\WMPPlayAsPlaylist]
  @= "{CE3FB1D1-02AE-4a5f-A6E9-D9F1B4073E6C}".

• Disc menu missing in file created by hand for PC

  Added a Menu of disk to my pre draft 9 - when I play a MPEG, AVI or WMV created by sharing the PC to disc menu is not present.

  The disc Menu will appear ONLY when you burn it to disc or burn it to a folder, create the DVD-video structure. It will NOT appear in an exported Shared file BC

  Hope that helps,

  Hunt

• Missing Disc menu buttons work space

  I just finished two days of video editing. I followed the instructions in the user guide and especially everything happened, but now it's time to burn the DVD and I'm baffled by the instructions that point to model buttons and his project in the workspace Menu disc. These buttons do not exist. Can't they appear no matter what I do, and I can't find any instructions in the user guide to hide and reveal these buttons.

  Why are these hidden or missing buttons? How can I make it appear?

  Thank you

  Brian

  Don't forget, the program goes into a different mode once you click to select the background of the menu, text or button in the window available to drive.

  To return to the workspace to create Menus, you must go to the workspace to change and then back to the disc menu tab.

  -->

• When I reinstalled windows xp media Center 2005, I get a prompt to insert the disc of windows xp professional service pack 2 CD, I don't have it, what should I do then?

  When I reinstalled windows xp media Center 2005, I invited to insert the disc of windows xp professional service pack 2 CD, I'm not available, what do I do next? If I canceled it, I know that windows installed yet to complete the work. But I'll soon get error and windows do not work properly.

  I am frustrated with Microsoft Corp., why didn't they make things easier for users to enjoy. I noticed all the announced sounds so pleasant during installation.  Everything suddenly it asks for windows professional service pack 2 CD.  where I go to get this information from?

  Can someone help me right now, I am desperately wanted to complete this work. I left my computer hang for hours and hours. waiting for windows xp professional CD disk to copy and install.

  Thanks for your response.

  Luke

  See this link from a previous thread for advice and information.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/is-there-a-way-i-can-still-get-SP2-and-SP3-for/9b917f32-4353-4B7E-BC54-348470f7ff31

• Edge animate Composition does not exist in the inert menu to put the file Edge OAM (insert > media > Ed)

  I joined Adobe Cloud. Edge animate Composition does not exist in the inert menu to put the file Edge OAM (insert > media > edge animate Composition). Why?

  Post your question in the forum Adobe Edge animate here http://forums.adobe.com/community/edge_animate. They will be able to help you.

• Continue to to "insert the disc in the drive."

  Keep do insert disc in the drive, when it is already loaded.  Cannot read the custody CD eject.

  Hi Psmith8554,

  Follow the instructions in the link below that may help you resolve the issue.

  Method 1:

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052
   
  Check whether the problem is resolved.

  Method 2:

  If your removable media appears with a drive letter named C:\ or any other existing drive letters, you must change its drive letter.

  1. click on start.
  2. type in "Computer management" in the search box.
  3. click on computer management.
  4. click on continue to continue.
  5. in the computer management window, click on disk under the option of storage management.
  6. you will find all the storage devices connected to your PC here.
  7. If you want to change the drive letter, right click on the connected removable media and click change drive letter and paths...
  8. it would take you to another box.  Click on change.
  9. Select the drive letter to assign the menu drop down.
  10. to confirm, click OK.
  11. click on Yes. Check whether the problem is resolved.

  You can check the link below:
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Error e/s on the insertion of a DVD video disc - Satellite A105-S4284

  My mother bought a Satellite A105-S4284 during a stay in the States. DVD - RAM UJ - 841S with her drive is set to 1 in the region for DVD playback, I want to get it on region 2. I told myself I have 4 changes left, but I am unable to change it. He asked a zone 2 DVD to be inserted and I have administrator privileges - the two conditions are met, but it refuses to work. I then tried to see if she could read the disc at all, however try to access it from the browser I get an IO error. I checked the disc with a variety of drives, CD-ROM, CD Audio, the Toshiba installation/config DVD etc. all read fine, but not DVD-video. I deleted the DVD RAM driver, sought of firmware updates (cannot find a suitable) and updates of pilot (impossible to find).

  I can't work on why he dislikes the video DVD (I tried a lot of discs), even tried with the Media Express Player playback. Because it reads all other formats of discs, it seems unlikely to be a hardware problem, so I think it's a problem with the firmware, but like I said I couldn't find one.

  Any ideas would be greatly appreciated.

  Kind regards
  sab0tage

  BTW happy Christmas

  Hello

  Do you have the drive to region 2 now?
  This might be a reason for the exploration of DVD-related issues.
  It would be very interesting to know if it of possible to explore this DVD on the other computer.
  Additional I think lots of original DVDs is safe and supports some kind of encryption and, therefore, it s not able to open it with Solution Explorer.

  I put t know why you were not able to change the area by car, but perhaps this has something to do with the operating system installed.
  Have you tried to install a new OS from an original CD of Microsoft, and then change the region on the drive?

• My Windows Media Player does not automatically recognize when a disc is placed in the disc drive.

  My windows media player does not automatically recognize when a disc is placed in the disc drive. I have to put the disc in the disc drive, and then close windows media player, with the disc in the disc drive already, then re-open windows media player. Reopened WMP with the disc in the disc drive, it recognizes the disc in the drive. It then functions well until I need to change the disk at this time I have to start the reboot stop of WMP. This problem has not allways exists just started a few months ago. Thanks for any helpful information.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  In addition,

  When you insert a CD or a DVD, Windows Vista may not recognize the disc

  http://support.Microsoft.com/kb/939052

• CD DVD drive does not recognize inserted the disc: Code 19

  Windows cannot start the CD-ROM/DVD-ROM device because its information configuration (in the registry) is incomplete or damaged (Code 19). The CD-ROM/DVD-ROM device is a: HL-DT-ST DVD - RAM GH40L ATA Device on an HP Pavilion Slimline

  Hello

  Here are a few articles that will probably solve your problem.
  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

  http://support.Microsoft.com/kb/929461

  Your CD or DVD drive cannot read or write media - A Mr Fixit

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  When you insert a CD or a DVD, Windows Vista may not recognize the disc

  http://support.Microsoft.com/kb/939052

  Mark <> Microsoft Partner

• Computer does not recognize the discs when inserted in my D: and E: drives.

  Original title: DISK DRIVES D AND E . Do NOT WORK

  When I insert a blank disc in my drives .He is not found by my computer.could would it be a disc that I need to update? or is their another way I can get it going again until a few weeks ago running good, I ultimate.32 bit .is their a scan from windows vista I can do to find what reader needs to update it please help.

  Hello

  It is not unusual for the same problem have an impact on both drives, in fact, is planned.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• My Dell Desk Top DVD Player does not work. Whenever I have insert the disc and click here to read... I get the message insert' disc Please "."

  What is the faulty drive, or the software that is missing

  Hello

  What happens if you close all programs and then insert the disc?

  -------------------------------------------------------------------------

  If you have problems with CD/DVD drive:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.