inspect the declaration established

Similar Questions

• You can inspect the element of a mobile device?

  You can inspect the element of a mobile device?

  You need connect your phone to the desktop Firefox, https://developer.mozilla.org/en-US/docs/Tools/Remote_Debugging/Debugging_Firefox_for_Android_with_WebIDE

• How to translate the declaration C++ and C

  Hello

  I have a DLL that I want to use in a program developed by CVI (FDS version 8.5.1). DLL comes with documentation including a file include (* .h), where all function declarations are given. So usually I would just include this header file, unfortunately, this file was written for C++ and contains the declarations of functions of the following type:

  empty typedef (__stdcal * fp SOMETYPE) (double &, double &, long &, long).

  The compiler and I are confused by the '&' I know 'double' and ' double *', but not "double &'..." The same for the CVI that complains with an error of syntax, found '&' expected ')'.

  Then of course I have to manually translate this C++ C style header file - but I have no idea how to proceed... Maybe someone could help me? Thank you!

  It's been a while since I've done any C++, but as far as I know, you can again declare the function as:

  empty typedef (__stdcal * fp SOMETYPE) (double *, double * long *, long)

  in the header and call it from your code by passing the variables or pointers "address of".

  In this case, '&' in the function statement means "by reference."  It's a bit like pointers in C, but allowing the error checking (for example - cannot be NULL, cannot be re-assinged, etc.) and probably makes the compiler optimizations.  If you are interested in, search google for References C++, or you can check out wikipedia:

  http://en.Wikipedia.org/wiki/reference _ (C %2% B 2 B)

• Four cameras to inspect the label presence / Date / batch Code

  Hello

  We intend to use four color cameras (more probably Firewire) to inspect the right label presence (attached image), Date / batch Code (most likely a match and no OCR/OCV), liquid level and presence of Cap. The speed of the conveyor is 240 bottles per minute (ongoing). As the bottles are rotating, there is no fixed orientation of the label. Thus, we intend to capture 4 frames on each trigger, to assemble and to inspect for a suitable Date and batch number, correct label, liquid level and correct the blockage. Good level of liquid is always above the label, so it shouldn't be a problem.

  We need a software / hardware recommendations for the cost of work effectively. For example, can VBAI as well as NI EVS-1464RT work for this application, or do we need to Labview and the Vision Development Module? We have the best price / performance for this application.

  Any comments / suggestion should be highly appreciated.

  Dear Faisal,

  VBAI does not include the steps to assemble the images, I suggest you LabVIEW and the Vision Development Module development.  If you want to use the EVS-1464RT, you will also need a copy of LabVIEW RT.  Note: the Vision Development Module can be purchase as a bundle with LabVIEW RT, see http://sine.ni.com/nips/cds/view/p/lang/en/nid/207699.

  Another way to achieve your goal of a 360 degree view of the bottle would be to use a lens Opto pericentrique Engineering, see http://www.opto-engineering.com/pericentric-lenses.html.  This would allow you to use a camera.

• Line break WCF in the header/footer of the declaration

  Hello

  y there is it possible to force line breaks in headers or footers of the declaration? I'm on the way to develop my own report and you want to customize the header/foot a little more my way...

  Thanks and greetings

  Oliver

  I found the solution for me...

  Create your own text rendering engine and new lines of support set to true, now you can set line breaks with a normal entry in your text...

  If you know how, then, it's really easy...

  Thanks and greetings

  Oliver

• How to set a partialTriggers for the declarative component

  12.1.3 jdev

  I try to set partialTriggers for my component declarative.

  From another forum, people suggested using one different name other than partialTriggers to avoid override a final method in RichDeclarativeComponent.

  Then, I set this:

  < afc:attribute >

  < afc:attribute - name > myPartialTriggers < / afc:attribute - name >

  < afc:attribute - class > java.lang.String [] < / afc:attribute - class >

  < / afc:attribute >

  and

  "< af:selectOneChoice id = simple =" #{attrs.simple "dc_droplist_soc"} "readOnly =" #{attrs.readOnly} "disabled =" #{attrs.disabled} ' "

  value = "#{uploading." "Value}" label = "#{attrs.label}" binding = "#{dropListComp.selectOneChoice}".

  "autoSubmit =" #{attrs.autoSubmit} "required =" #{attrs.required} "visible =" #{attrs.visible} ' "

  valueChangeListener = "#{dropListComp.handleValueChangeListener} '"

  partialTriggers = "#{attrs.myPartialTriggers} ' / >"

  But it does not work. I don't see a partialTriggers work.

  Any suggestions?

  Thank you.

  Hello

  try to use PartialTrigger on the declarative component and then reference it from

  partialTriggers = ' #{uploading. '. PartialTriggers}' / >

  Frank

• How to define an attribute of the declarative component with the list of options

  12.1.3 jdev

  I'm trying to define a declarative component UOM. It has a text box with a selectOneChoice of the optional codes for this type of unit of MEASURE.

  I have uomType as one of the attributes of my unit of MEASURE. It may be of WEIGHT, VOLUME, LENGTH, etc. Is it possible to provide a list of the channels supported for my uomType? So, when the user uses this component, they can select a type they want in the list, instead of typing in themselves.

  	< afc:attribute >
  	< afc:attribute - name > uomType < / afc:attribute - name >
  	< afc:attribute - class > java.lang.String < / afc:attribute - class >
  	< afc: required > true < / afc: required >
  	< / afc:attribute >

  Thank you.

  Hello

  Unfortunately the lists are not an option with the declarative elements

  Frank

• partial trigger on the declarative elements

  Hello

  I have a declarative component with many facets and a high component < af:panelGroupLayout >. I would like to refresh the entire component with PPR. In my page, I have a selectOneChoice with autoSubmit = 'true', but now I have to set the property partialTriggers to the declarative elements.

  So I created a new myPartialTriggers to attribute for declarative components as a string and changed the top element to < af:panelGroupLayout partialTriggers = "#{attrs.myPartialTriggers}" >. So now I can define the component property myPartialTriggers declarative the ID of the SelectOneChoice. It is not work that I get an exception:

  Error occurred: Houston-29000: Unexpected exception caught: java.lang.IllegalArgumentException, msg = cannot convert: c42:iflt9:dc_r2:dc_c2:naturalPersonSoc of type java.lang.String class at class [Ljava.lang.String;

  Thank you

  JDev 11.1.2.4

  Essentially, you surround the declarative component with a container and the container ppr. Read the whole story http://www.oracle.com/technetwork/developer-tools/adf/learnmore/005-how-to-bind-decl-comp-169123.pdf

  Timo

• Anyone had any chance to get the 'Chat line' to answer a question, not to mention that the declarant is unavailable...

  Anyone had any chance to get the 'Chat line' to answer a question, not to mention that the declarant that it is not available at this time?

  Nevermind, I got a refund.

• I paid for a month to inspect the Adobe and the Chrome plugin is still telling me that I have to upgrade

  @AdobeSupport

  I paid for a month to inspect the Adobe and the Chrome plugin is still telling me that I have to upgrade.  I need this job.

  Thank you.

  SOLUTION:

  In my case I had to uninstall the Adobe Edge inspect exe (Windows) of the control panel. Uninstall the Plugin Chrome and quit the installer of creative cloud.

  I then restarted the CC Setup program, then I'm went to the Adobe download page inspect, clicked on the download button, THEN installed the Plugin Chrome.

  I guess that when in doubt, reinstall everything.

• Inspect the edge will not display on local IP Typekit fonts

  Liz

  January 28, 2014 .  05:17 EST

  Hi Dennis,

  Here is the information of one of our engineers on the use of edge inspect and Typekit:

  "Unfortunately, it seems that you run in a situation where Edge inspect and Typekit fit very well. I'll explain a little more and then offer suggestions to work around the problem.

  When you are browsing a local website via the host name "localhost", which is not accessible to any other devices on your network, edge inspect automatically gets the local IP address of your machine (which is not the same as the external IP address as shown on sites like whatismyip.com) who sent to mobile applications. For example, let's say I have a Sinatra in Chrome app on my Mac as http://localhost:4567. My iPhone would not be able to understand the host name "localhost", but he can see my Mac using its address IP 10.1.10.1, to inspect the edge navigates to http://10.1.10.1:4567.

  So, to get the fonts to work, you could add time 'localhost' and ' 10.1.10.1' to your Kit. However, we recommend adding IPs local to the kits because they tend to change without warning. (In my example above, the next time I turn on my computer to its IP address may have changed to 10.1.10.2, but all I know is that fonts had stopped working on my devices again).

  To work around this problem, we recommend that use a form of "dynamic DNS" - basically, a domain name that is automatically updated with your current IP address and therefore will always point to your computer.

  If you are using a Mac, the simplest thing would be to use the host name of your Mac Hello. Hello is a technology built into Mac OS X and iOS to help each other devices automatically find on networks.

  To find your host name of Hello:

  1. open on your Mac system preferences.
  2. choose the share icon.
  3. your host name hello will appear in the upper part, under the "Computer name" field

  You can add the host name that appears in your kit and use it on any Apple device on your network. For example, my name is Hello my - MBP.local, in order to access http://My-MBP.local:4567 on a Mac or an iOS device and see my app to Sinatra.

  Unfortunately, this simple solution will work on Apple or Windows PC devices with an Apple Hello software installed, you cannot use this hostname with Android phones or tablets. If you need a host name that works on any device, there are a few options, I recommend you:

  1. a third party called before service is a way to easily redirect ports on your computer to other devices anywhere on the internet. You can learn more about them and sign up for a trial of 30 days here: https://forwardhq.com. Before you give a domain name standing for your transmitted app that you can add to your kit, as 'dev - yourcompany.fwd.wf»

  2 37signals has a free 'wildcard DNS"service called xip.io which will automatically forward the traffic to a local IP address. You can get your current local IP address by opening system preferences, then choosing network. The IP address must be included in the text in small characters under the status of connection for the connection is active (i.e. has a green dot next to it). Once you have the IP address, you can access your computer to [YOUR IP address]. XIP. IO. for fonts working, add *. xip.io to your kit. Remember that your IP address may change, so if your site continues to be accessible, you should check to make sure that you have the correct IP address.

  Personally, I use xip.io if I need to test Typekit on multiple devices using edge inspect. This certainly isn't the easiest to use, option but it works very well with almost no setup, and it's free.

  We will work to make the experience to use Typekit and inspect the edges together better in the future, but I hope these suggestions will help out you at the moment. »

  I hope this helps; Let me know if you have other questions about it!
  -liz

  Dennis

  January 28, 2014 .  04:25 pm
  Original message

  Howdy,

  Looking for some suggestions to configure Edge inspect properly so I am able to see my served Typekit fonts.

  My current setup is this w/MAMP Pro http://cl.ly/image/0W2H1E1Q2P2T (http://cl.ly/image/0W2H1E1Q2P2T)

  This is a configuration of a project based lithium, so I need to work this way in order to view the site locally. Change the name of the server to something custom as mysite.local doesn't seem to work so far with edge inspect only localhost (especially since Cree MAMP home).

  Currently, if I add my local IP address to the Typekit kit settings my fonts still don't to inspect loading not on Edge.

  Thanks for the help,

  ~ Dennis

  Ahh... Cool.

  Inspect edge uses Webview to render the pages which is a stock browser. WebView has some quirks related to text rendering. It makes the font by default the system when the rendering of text that has the attribute CSS 'text-rendering' value 'optimizeLegibility' or 'geometricPrecision '.

  There is a bug already logged for Andorid.

  For your reference:

  https://code.Google.com/p/Android/issues/detail?ID=41846

• Cannot inspect the contents of an iframe

  I develop a Facebook app and would like to be able to view the content of the iframe (my app) FB through edge inspect. When I inspect the code on my iPad, I'm able to do all the way up to the iframe cannot see its contents. Any thoughts on what I am doing wrong?

  Thank you

  Yes. Facebook is load our app from another area in the iframe. I could find a way around the problem of the iframe displaying our app directly in a browser without all the dressings of the Facebook page. I wanted to just make sure I was not doing anything wrong.

  Thanks for your help,

  Mike

• How to use the declarative component without deployed as JAR

  Hi all
  I want to create a reusable component (declarative component) for PanelHeader with default features packed in I want to use in my application. Because this component will be used only in my project, I don't see a use to go through the process of creating a jar and deploying it before using it. Is it possible to use this component without creating a JAR.
  
  Thank you
  -Srini.

  User 895137,

  your welcome to ignore the best practices in the development of the ADF. The declarative elements are deployed in the libraries of the ADF. If you keep the declarative component in the application then project you will have a chance to deploy independent of the application (which means that your ADF library contain more than just the source of the component (which is where your nightmare begins)). Therefore, best practices

  1. create the declarative component in a new project in JDeveloper. Follow

  http://download.Oracle.com/docs/CD/E21764_01/Web.1111/b31973/af_reuse.htm#BABJBFDD

  2. If you don't ant to deploy components in a tag library, use declarative dynamic components (will not deploy-able in many applications, as you mentioned your future plan is), as shown here

  http://download.Oracle.com/docs/CD/E21764_01/apirefs.1111/e12419/tagdoc/af_declarativeComponent.html
  http://download.Oracle.com/docs/CD/E21764_01/apirefs.1111/e12419/tagdoc/af_componentDef.html
  http://download.Oracle.com/docs/CD/E21764_01/apirefs.1111/e12419/tagdoc/af_xmlContent.html

  Frank

• Error message 'missing; before the declaration 24 "

  Hello

  I get the error message "missing; before the declaration 24 "in the following script:

  Create a variable to hold the document object

  var StartDate = (xfa.form.form1.page1.signature.StartDate.rawValue);
  var EndDate = (xfa.form.form1.page1.signature.EndDate.rawValue);
  var assocName = (xfa.form.form1.page1.signature.assocName.rawValue);
  assocID var = (xfa.form.form1.page1.subForm1.assocID.rawValue);
  var assocEmail = (xfa.form.form1.page1.subForm1.assocEmail.rawValue);
  var assocExt = (xfa.form.form1.page1.subForm1.assocExt.rawValue);
  var assocDept = (xfa.form.form1.page1.subForm1.assocDept.rawValue);
  var mgrName = (xfa.form.form1.page1.subForm1.mgrName.rawValue);
  var mgrEmail = (xfa.form.form1.page1.subForm1.mgrEmail.rawValue);
  var salariedHourly = (xfa.form.form1.page1.subForm1.salariedHourly.rawValue);
  directReports var = (xfa.form.form1.page1.subForm1.directReports.rawValue);
  var perfRating = (xfa.form.form1.page1.subForm1.perfRating.rawValue);
  var howLongWorking = (xfa.form.form1.page1.request.howLongWorking.rawValue);

  
  PRESENT DATE
  If (StartDate == "") then
  xfa.host.messageBox ("Please enter a shipping Date");
  xfa.host.setFocus ("xfa.form.form1.page1.subForm1.StartDate");

  HIRE DATE
  ElseIf (EndDate == "") then
  xfa.host.messageBox ("Please enter a hire Date");
  xfa.host.setFocus ("xfa.form.form1.page1.subForm1.EndDate");

  NAME OF PARTNER
  Else if (assocName == "") then
  xfa.host.messageBox ("Please enter your name");
  xfa.host.setFocus ("xfa.form.form1.page1.subForm1.assocName");

  PARTNER ID
  ElseIf (assocID == "") then
  xfa.host.messageBox ("Please enter your ID");
  xfa.host.setFocus ("xfa.form.form1.page1.subForm1.assocID");
  
  EMAIL PARTNER
  Else if (assocEmail == "") then
  xfa.host.messageBox ("Please enter your email address');
  xfa.host.setFocus ("xfa.form.form1.page1.subForm1.assocEmail");
  
  EXTENSION ASSOCIATE
  Else if (assocExt == "") then
  xfa.host.messageBox ("Please enter your extension number");
  xfa.host.setFocus ("xfa.form.form1.page1.subForm1.assocExt");
  
  DEPARTMENT ASSOCIATE
  Else if (assocDept == "") then
  xfa.host.messageBox ("Please enter your Department");
  xfa.host.setFocus ("xfa.form.form1.page1.subForm1.assocDept");
  
  NAME OF THE MANAGER
  Else if (mgrName == "") then
  xfa.host.messageBox ("Please enter your name of");
  xfa.host.setFocus ("xfa.form.form1.page1.subForm1.mgrName");
  
  E-MAIL MANAGER
  Else if (mgrEmail == "") then
  xfa.host.messageBox ("Please enter e-mail address of your manager");
  xfa.host.setFocus ("xfa.form.form1.page1.subForm1.mgrEmail");
  
  HOURLY EMPLOYEES
  Else if (salariedHourly == "") then
  xfa.host.messageBox ("Please enter if you are salaried or hourly");
  xfa.host.setFocus ("xfa.form.form1.page1.subForm1.salariedHourly");
  
  DIRECT SUBORDINATES
  ElseIf (directReports == "") then
  xfa.host.messageBox ("Please indicate if you have any direct report");
  xfa.host.setFocus ("xfa.form.form1.page1.subForm1.directReports");
  
  PERFORMANCE RATING
  Else if (perfRating == "") then
  xfa.host.messageBox ("Please certify your last performance rating");
  xfa.host.setFocus ("xfa.form.form1.page1.subForm1.perfRating");
  
  HOW LONG WORK
  Else if (howLongWorking == "") then
  xfa.host.messageBox ("Please indicate how long you think that this scheme of work");
  xfa.host.setFocus ("xfa.form.form1.page1.questions.howLongWorking");
  

  on the other
  Button6.execEvent ("Click");
  Page2.presence = "visible";

  EndIf

  I have been hunting for several hours and can't seem to find or correct the problem. Can anyone help?

  Thank you

  MDawn

  It would be easier if I cpoudl see the form in action... .a you send it to [email protected] and include a description of how to reproduce the problem.

  Paul

• the declaration of the type of this expression is ill-formed incompleteor

  error 320 to the column of the row 22 14
  the declaration of the type of this expression is ill-formed incompleteor
  error on line 22, column 4 0
  Declaration ignored
  

  DECLARE
       v_value VARCHAR2(50);
       v_prod_id varchar2(100);
       v_prod_name VARCHAR2(100);
  BEGIN
       v_value:=:product.SIZE_LONG;
       v_prod_id:=:product.prod_id;
       v_prod_name:=:product.prod_name;
       IF v_value is not null then 
       insert into product (prod_id,prod_name,DRESS_COMPOSITION,WASH_LABEL_INSTRUCTION,PRESSING_CHARGE,DYEING_CHARGE,
       EXTRA_CHARGE,FINISHING_CHARGE,ITEM_TYPE,TOTAL_FOB,SEASON_YEAR,INTERSTAT_CODE,RETAIL_EURO,WHOLESALE_EURO,
       RETAIL_USD,WHOLESALE_USD,RETAIL_GBP,WHOLESALE_GBP,CATEGORY)
       values (v_prod_id||'-L',v_prod_name||'-Long',:product.DRESS_COMPOSITION,:product.WASH_LABEL_INSTRUCTION,
       :product.PRESSING_CHARGE,:product.DYEING_CHARGE,:product.EXTRA_CHARGE,:product.FINISHING_CHARGE,:product.ITEM_TYPE,
       :product.TOTAL_FOB,:product.SEASON_YEAR,:product.INTERSTAT_CODE,:product.RETAIL_EURO,
       :product.WHOLESALE_EURO,:product.RETAIL_USD,
       :product.WHOLESALE_USD,:product.RETAIL_GBP,:product.WHOLESALE_GBP,:product.CATEGORY);
       LOOP
            insert into product_detail1(prod_id,item_code,item_name,qty,price,unit,avg_rate) 
            values (:product_detail1.prod_id,:product_detail1.item_code,:product_detail1.item_name,
            :product_detail1.qty,:product_detail1.price,:product_detail1.unit,:product_detail1.avg_rate);
                 exit when NO_DATA_FOUND;
            NEXT_RECORD;
       END LOOP;
  elsif
       v_value is  null then 
       delete from product where prod_id=(v_prod_id||'-L');
  end if;
  END;

  Please Guide
  
  Why this errro comes
  
  Thanks and greetings
  Vikas Singhal

  I don't know why not use is not the same as I showed. The error is coming because the closer you get the lower case letter in the condition. Before apply the code, you first need to examine carefully.

  Change This.  exit when :system.last_record = 'true';to  exit when :system.last_record = 'TRUE';
  

  Don't forget to use VALIDATION after END of LOOP

  After that he will even record to another record, the only change is prod_code
  LARGE, SMALL or SHORT etc.

  But you said before that the product size = LONG then you want to insert the record. And now, for all sizes. In any case, if yes, then remove the IF condition.

  -Clément