Inspiron 3847 downloads something not one operating system driver

Under drivers & downloads, OS has link to download a Windows Recovery Image downloading files for Windows 10 for my mentioned computer.

Having an ISO is a good thing.  It must be stored on an external hard drive so that you can recover years from now when the original drive dies.

This is not a case if they die is just a matter of time.

Tags: Dell Desktop

Similar Questions

  • I got the message that I am running one operating system is no longer supported by Photoshop?

    Hello.

    I am trying to download the trial of 30 days for Photoshop and Illustrator and I get the message that I am running one operating system is no longer supported by Photoshop. Go to system requirements (or something like that because it's in Danish and you will see a list of all the supported platforms.)

    How do I do that?

    Thank you very much!

    Hello

    Please see system requirements | Photoshop

    Hope that helps!

    Kind regards

    Sheena

  • METI los datos mi tarjeta, compre ilustrator CC pero no puedo instalar no as soon as not compatible operating system, the hago como para instalar

    METI los datos mi tarjeta, compre ilustrator CC pero no puedo instalar no as soon as not compatible operating system, the hago como para instalar

    Please refer to the system requirements | Illustrator for operating system support.

    You can install CC 2014.

    Please use the following steps.

    1. Download creative Cloud desktop application from the link Download Adobe Creative Cloud apps | CC free trial Adobe
    2. Sign in using your Adobe ID and password.
    3. Go to the applications Panel and install the CC 2014 of the required application.

    Hope this will help you.

    Kind regards

    Hervé Khare

  • I want to download a trial of operating system windows 8 on my pc windows 7 but cannot find a link

    I want to download a trial of operating system windows 8 on my pc windows 7 but cannot find a link that would be very very useful... thx

    Original title: windows 8 os of the trial

    http://TechNet.Microsoft.com/en-us/evalcenter/hh699156.aspx

    RD

    EVAL it is for the company and is in my opinion the only available "eval".

    @CS

    There is only the assessment for enterprises and it's only 90 days.  After the 90 days if you want to come back you will have to completely re - install win 7 (or dual boot)

  • I want to use my controller xbox 360, but windows 8 is not under operating systems, what should I do?

    I want to use my controller xbox 360, but windows 8 is not under operating systems, what should I do?

    Plug it in and let the auto drivers install.  I use mine all the time.

  • I'm working on the end of Vista this message comes when I tried to download creative cloud: "the operating system you are using is no longer supported by InDesign.» See you to the minimum required pour full list of

    I work under Vista and this message comes when I tried to download creative cloud: "the operating system you are using is no longer supported by InDesign.» Refer to the minimum requirements for a complete list of the supported platforms. "How can I do install creative cloud and use Indesign?

    Thank you

    Hi Laurent,.

    Please refer to the data sheet below:

    System requirements | Creative cloud

    Kind regards

    Sheena

  • Configuration Lab Manager - error: not supported operating system

    I try to install vCenter Lab Manager 4.0.4.1406 but I get error: unsupported on OS when I run the Setup file.

    It is Windows Server 2008 R2 x 64 on an ESXi 5.0 machine.

    IIS and the .net Framework 4.0 is installed.

    Uninstalled AD.

    Looks like all the system requirements are met, but I am still getting the same error (and no more detailed error message then not supported operating system)


    I don "t think that Windows 2008 R2 is supported for Lab Manager server, only Windows 2003 and Windows 2008 are mentioned in the Manual of Installation.

    For guests, it has made experimental support for Windows 7 and Windows 2008 R2.

  • FTP command does not when the current folder is not on the system drive

    I have the following problem when I activate FTP from the command prompt when the current folder is not on the system drive.

    I have a similar problem when you use a client FTP (ftprush)... It is installed on the D:\ and activation with the startup in D:\ folder reports 10038 (invalid socket handle)... It works fine when the startup folder is c: drive

    (MON C:\ est un petit SSD où j'ai mis les programmes opérationnels et les applications les plus utilisées)... my D: drive is a program for non-intensif progs disk)

    I have check the environment variables but can't find anything wrong with them, and I never touched at these

    Current folder is on my c drive windows :\---> works OK and I can open an FTP site

    C:\Windows\System32>FTP

    FTP > quit


    I change the folder to the very second disc---> broken, the report "ftp:socket" and the existsd.


    C:\Windows\System32>d:

    D:\>FTP


    FTP: socket

    D:\ >




    I managed to solve my problem by making a

    command "netsh winsock reset."

    This solves all my problems... including ftprush, filezila, starting the ASP.NET Server in Visual Studio (which also refused to)

    implementation)

  • can not defragment my SYSTEM drive

    Hello.

    I have a g6 Pavilion. I have more than three quarters of my unused hard drive space. I scanned for virus etc using my Norton 360.

    When I defragment my disk, HP support assistant allows me to defragment my C drive but not my SYSTEM drive, which is now 5% frag. This frag appeared last week.

    Help, please.

    I learned to check for disc defects, I must now do, but if there are no disk errors, what do I do next.

    Thank you.
    David

    You do not touch the system drive - I guess that hereby you are referring to a reserved system or the hidden restore Partition or partition HP tools - any of what you touch/interfere with

  • I can't download photoshop test: not supported operating system

    I get this message and won't let me download...

    You are running an operating system that Photoshop no longer supports. See the system requirements for a complete list of the supported platforms.

    What operating system and version are you running?

    Windows: you need either Windows 7 or a later version.

    Mac: you must be OS X 10.7 or higher.

  • Impossible to download and reinstall the operating system after erasing HD

    Yesterday morning, my iMac won't start.  It was fine the night before.

    The progress bar reaches about two thirds to three quarters of the way to the end when the bar of progress disappears and I find myself with a gray screen. It does this by starting too.

    I followed the advice of Linc Davis at https://discussions.apple.com/message/21333265 (hash) 21333265 (Note - I can't find the symbol of hash on my keyboard key so if you if know where he is, please replace by in the link - oh (hash) and tell me where it's too please ;-)).

    I started the Revovery volume (now here actually).  Run Disk Utility/First aid finds no problem with MacIntosh HD (my boot drive). I can't find how to repair permissions.  The option no longer seems to be there. Reset NVRAM has nothing else that makes the iMac wonder my preferred language.

    I used download and reinstall OS option.  The first time I tried to re-download El Capitan, it took 15 minutes and 45 minutes to install.  Installation failed leaving me to the grey screen again.  I think that the Setup program itself was trying to restart the iMac when he got stuck in the same place I'm stuck.  I left it there for about six hours before I tried to restart manually.

    Tried to download the operating system again. This time, it was after using the recovery volume, select MacIntosh HD, by using erasing, then the option reinstall in THE.

    I did two times now.  The first time I tried 'Erase and re - install' the download bar has got to a point about a third of the way across, and then he stopped. Time of download bar gradually got more and more long, up to what I canceled it (when the display estimated download time is six and a half).  The internet connection was problematic, or the Mac had stopped download (similar to the earier progress bar).  The second attempt to delete and download, the download bar has not yet started to progress.

    My HARD drive has several volumes.

    1. The most important. My MacIntosh HD with OS 10.11.4 - El Capitan.
    2. The second, MacIntosh HD 2, is about 50 GB, a Mavericks installed on it.
    3. The third is 10.11.4 recovery volume.
    4. The fourth is another volume of recovery for the Mavericks.
    5. There is another called eDrive bulkhead.

    Apart from MacIntosh HD, with none of these volumes I problems in starting up (with the possible exception of the Mavericks resumed, that I have not tried to access all since the update to El Capitan).

    I used first aid utility disk several times, and no problems have been reported. I used the version of El Capitan permanently.

    I can't understand why, after erasing the MacIntosh HD to do it again, I can't get the iMac to download the MacOS and reinstall.

    A couple of clues-

    • After his clear utility drive always reports what is MacIntosh HD. (When I restart, the dialog "Select Start Drive" only shows the volume of the Mavericks and eDrive)
    • Disk utility also shows "Apple Disk Image/OS X Base System."  OF THE said that it is ejection. But this button does not work.  I suspect it's what might stop download me the installer and start again.

    I used e-drive to check the iMac and, in particular, the drive HARD; even performed a surface scan.  No problems have been reported.

    Your 2007 iMac is too old to download OS X, you need to install OS X since the recovery partition directly. If this does not work then Yes, something is wrong with your HD run Apple Hardware Test Mode Extended 2 - 3 times back to back, if errors appear which confirms what I said. You will need the original DVD that came with the computer in order to run it.

  • Can start at Saint Martin of ISO but not install operating system ISO

    I have many ISO files for installing OS geust, who have been tested and used several times on.

    I have a new installation of vSphere with no local DVDROM 5.1, so I downloaded some ISO in the local data store.

    The guest VMs can boot these ISO files, but OS installation fails with various errors of each different operating system.

    Windows 7 installation fails because the drivers for the CD-ROM drive are not available.

    I've rechecked files as well as their reuploaded to the store of data one or two times with the same results.

    I mounted the ISO of Windows 7 file on my machine local and then used to connect to the client device for the ISO mounted and installation it works, after dismantling the ISO locally so I downloaded again and tried to install another VM of him with the same results.

    Any ideas or suggestions would be great.

    You can check the integrity of the download:

    KB.VMware.com/kb/1032711
    http://communities.VMware.com/message/2129445

  • Problem re-installing VISTA after the removal of Windows 8 Preview Release, all I get is a black screen with a message "Not found operating system"

    I recently tried Win 8 on my VAIO laptop spare parts on which I ran Vista, after having previously deleted all the files and documents (I don't use often the laptop). Having concluded that Win8 will really work correctly with a touch screen (and the display size was bad as well), I uninstalled WIN 8, understand that I have to re - install Vista from my rescue disks. This I tried successfully a few months previously to make a clean reinstall. However, after removing 8 WIN via the Control Panel, I can't re - install Vista now. All I get is a black screen with a message "The operating system not found" and the rescue disks do not register. What can I do? I like Vista (although I now run Win 7 on my PC) and really want to put it back. Grateful for the advice.

    Well I finally fixed it by tweaking the BOOT BIOS settings and find something along the lines of VAIO Setup. I'm afraid, I just don't remember exactly what I did, but suddenly I found and ran 'VAIO Hardware Diagnostics' gave me a heart when it announced "no error was detected on the Vaio. Then I saw there was an entry for 'VAIO Recovery Utility - Recovery Wizard' and everything started to load. Since the 2 recovery discs I had. Finally, I ran MS Office and Small Business CD-ROM and now everything is back the way that it used to be. Here I had taken more note of how I got to the well Recovery Wizard. I hope that I never have to do it again!

  • DOWNLOAD OF A WINDOWS OPERATING SYSTEM BY USING AN ANDROID LIKE FLASH DRIVE

    Is it possible to use my Android as a flash drive, to download a windows operating system on to, then transfer them to my PC?

    You can download the ISO directly on your Android.

    I did this on my Galaxy tab brothers and managed to connect the tablet to my Windows laptop and then browse and copy the file.

    You will need to download the ISO directly from Microsoft Techbench:

    Site Web de Microsoft Techbench is an alternative available for downloading Windows 10 ISO files and create bootable copies.

    Go to: https://www.microsoft.com/en-us/software-download/techbench

    Before you start

    Make sure you have:

    • An internet connection (internet service provider fees may apply).
    • Enough data storage available on a computer, USB or external drive for ISO downloads and scripts.
    • 16 GB or larger USB for use on systems of disk space is low.
    • Micro-USB adapter for the use of media on shelves.

    Click in the list box select edition, then choose your edition, 10 Windows contains two installation files for the home and professional allowing you to select the edition during installation. What to choose, click on confirm and wait while the option is validated. Do not refresh the page. If you are running Windows 8.1 with edition of Bing, please make sure that you select Windows 10 SL.

    Only select Windows 10 N if you live in Europe, please note it does not include Windows Media Player.

    Click in the list box and then select your language and then click on validate and wait while the option is validated. Do not refresh the page.

    Click on your of desired architecture and then click Save.

    Follow the instructions to use the image for the USB/DVD tool Microsoft .iso , Rufus or file the Image Disk burning utility in Windows 7 or a later version to prepare the. ISO file. You can also mount the. ISO in Windows 8 or later, perform an upgrade.

  • Inspiron 3847 Office HDMI not wake up monitor

    Just bought a desktop computer Inspiron 3847 with integrated graphics to assess if we bring to our society.  Connected to an ASUS HDMI monitor and have no video.  Could not understand what was going on so connected via VGA instead and it worked as expected.  Ultimately determined that the Inspiron does not send a signal of alarm for the monitor.  Tried the monitor on a different model computer and it worked correctly.  Tried another cable with the monitor and the Inspiron HDMI but no change.  So, it means using a HDMI on the Inspiron 3847 monitor to turn on the monitor after starting the computer for it to connect via HDMI.  Checked to see if there was a BIOS update, but I have the version 2, which was recently published.  Any suggestions on how to make the Inspiron wake up the monitor when the system is powered or exit the mode 'sleep'?

    I had the same problem, but fortunately got better help Dell Cathaleen did.  I just bought an Inspiron 3847 of Dell desktop computer and also bought a new monitor ASUS from amazon.  Worked well with the VGA cable, but did not work with the HDMI cable.  The solution is simple, just do it once and you'll be ready to go. Basically, you need turn on the input screen while it is on the VGA HDMI cable. Then remove the VGA cable and install the HDMI cable.  Here's how: 1. hang your desktop on the screen with the VGA cable. 2. press "menu" on the monitor ASUS Punch.  3 scroll to 'Input Select' with the 'Down' button on the screen (just to the left of the menu button). 4 drill the menu button to switch to the list of the 5 cables.  Scroll down to select HDMI. 5. remove the VGA cable and install the HDMI cable.

Maybe you are looking for

  • Disabled code

    Need help with this please... Disabled system code is 9083587. Thank you

  • Registry change Hkey_current_user\Software\Microsoft\ | Windows\CurrentVersion\Explorer\CD Burning\Drives.

    Registry change Hkey_current_user\Software\Microsoft\ | Windows\CurrentVersion\Explorer\CD burning\Drives. CMD export as a backup of drives key Change the type of drive.  There are no subfolders under readers accordingly there is noneVolume {GUID) ed

  • Need help to get the drivers on my new E520

    Hi, I just got my new ThinkPad E520. I bought new without any OS. I just installed Windows 7 Professional 64-bit, but now I have a problem because there is no drivers and I can't connect to WIFI to download drivers (as the wlan drivers are not instal

  • How to open an application and have the full screen

    -It is used to completely open, but now opens with the half of the screen so I have to go to the upper right to maximize.  Looks like a setting has changed.  I noticed a prior response to make a right click on the shortcut to a program and select 'Pr

  • Cisco VPN Site to Site with a static and dynamic does not

    Hello I have ASA 5510 in Headquarters with static, IP and ASA 5505 in the remote site behind ADSL router trying to establish VPN, but its failure in phase 1 Config of the headquarters interface Ethernet0/0 Description link to router LeaseLine nameif