Inspiron 8600 and an adapter Intel wireless & new Linksys router

Similar Questions

• Problems connecting to wireless G Linksys router

  I have problems with connectivity issues with my wireless router. I have a Verizon DSL modem which is wired to a Windows XP computer and the wireless router. I have a total of 3 computers wireless (1 Office XP wireless, 1 laptop Vista) and XP wireless laptop 1. For these last months, I had intermittent connection dropping issues. I tried to change the channel on the parameters 9-05:49 wireless and so on and so forth, but the only channels that work for a while are 9 and 11, but I still feel the droppings of connection. It's very frustrating and confusing especiall since the signal strength of connection seems to be good to excellent. There are moments when (very little) when the connection works very well, but 90% of the time I can't go on the internet or connect to my VPN for the job.  Any help will be appreciated. Thank you.

  Try this:

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  On the Configuration tab change MTU size to 1300, then click on save settings...

  Click the settings advanced wireless

  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...

  Now let's see if you can locate your wireless network and try to connect...

• Problems of authentication of wireless with Linksys router after the recent updates

  No authenicate password for wireless connection

  Problem solved once the computer has been restarted two times, first time we just restarted it and same problem, second time stop and started them it authenicated normally. My other computers on the network worked well once the updates, just a computer that would keep asking password of the router, if you put it in the right pair invite just, once again, if you enterd in incorrect password, it would bring a window (incorrect password). The installed updates were KB981322 KB2347290, KB975558 KB905866 KB2141007.

• Intel Wireless WiFi Link 4965AGN with Inspiron 1525 problems

  I have Inspiron 1525 + 8.1 Windows + Intel Wireless WiFi Link 4965AGN (Intel last driver for Windows 8). If I set the off mode N card wifi, wifi is more slow (54 Mbit/s), but stable. If I turn N (enable) mode, wifi is fast 144 Mbps, but becomes unstable - often (few minutes) disconnects, the disconnection of the card shows a lack of drivers, you cannot reconnect to the router, you must restart your computer. Another computer - Dell Studio with pre-installed map 5100 is stable under the N on my home network. Dell officially submitted the 4965AGN card is compatible for Inspiron 1525. Is it possible for stable operation in N mode?

  waltur,

  I'm glad to hear that you were able to find a solution to your connection problem. Thanks for posting back.

  Take care

  Rick

• How to adjust Satellite A660 PSAW9A-02T00F for Intel Wireless Display

  How to adapt my laptop A660-PSAW9A-02T00F for Intel® Wireless Display (WIDI)?
  So, I can use the new Netgear Push2TV adapter?

  * what apparently my model does not support!
  So not happy.
  There certainly must be away from 'fit' the model I so that it supports? *

  In the section FAQ from Toshiba:

  How to connect and use my Intel Wireless Display?

  + Please note: the Intel® Wireless Display card is supported only on the Toshiba Satellite E200/006.
  For complete information about the product, you can see here. (Remember that there is no link to go anywhere).

  Link to FAQ: http://www.mytoshiba.com.au/support/item/411

  My computer is not very old... Here I am :(

  Please... someone tell me there is a FIX for this!

  See you soon
  Angélique

  Post edited by: JodieR

  Hello

  To be honest, I never tried to connect my laptop to the TV with Intel® Wireless Display, but I found some information on the page from Intel:
  http://www.Intel.de/content/www/de/de/architecture-and-technology/Intel-wireless-display.html

  Here's a nice HowTo movie created by Intel:
  http://communities.Intel.com/Community/Tech/intel_widi

  But the requirements are:

  CPU Core i7 - 620 M, i5 - 540 M, i5 - 520 M, i5 - 430 M, i3 - 350 M and i5 - 330 M
  In addition, you need Intel HM57, HM55-, - QM57 - or - QS57 - chipset
  And preinsatlled Windows 7.

  Should check this with your laptop!

• Computer HP laptop Pavilion DV6t has Intel wireless display?

  I am considering Netgear Push2TV and it requires Intel wireless display.

  Hello

  Sorry, but the answer is no.

• Adding a new wireless router from Linksys at an old Linksys router system

  Hello

  I'll install a new standalone DVR to a home video surveillance system.  I would like to be able to access it with my current PC so I would like to add a Linksys wireless router.

  I'm currently 1 Linksys Wireless - G Broadband Router with speed Booster model WRT54GS-BP and 2 models WMP54GS from PC that have PCI adapters Wireless-G with speed Boosters (802.11 g).  I had these installed since 2006 and although they are no longer supported I really want to have to upgrade because they work very well.

  My questions are:

  If I add a new Linksys router to my new DVR will be able to communicate with my older Linksys router and adapters?   If Yes, what would be the best new router Linksys type should I buy?

  Thanks in advance for any help and advice.

  Hi Dan,.

  Please excuse the delay of time here, but I had a hard time to post a reply.  I added Ethernet Wireless-N - WET610N bridge.  When I installed the software, I kept getting error 102 - an error occurred communicating with your device.  I called Linksys for help and the tech had me make a few changes to the router 192.168.1.1.  I was able to install the Web Service to display the camera on both of our PC.  So the addition of the WET610N allowed us to access the DVR wireless!

  Thanks a lot for all your help!

• Network of abandonment (intermittent and consistent) - Dell Inspiron 7347, Win 8.1, Linksys BEFW11S4, adapter Intel dual band wireless AC 7265

  History: I just bought a laptop / Tablet Dell Inspiron 7347 (exchanged for another unit, see below).   Problems to maintain a strong connection and when connected, it is very slow.   When it is connected to the wireless router, it maintains a (slow) connection for 3-5 minutes and then craps out (restrict the connection with the yellow "!" on the WiFi in the taskbar).  He then returned to the top of 1 3 minutes later.  It's a coherent continuous cycle.  I tried to reset the default router with no luck.

  All the other devices on this router (office, phone, IPad) all hold the connection without problem at the same time, this device is not.

  Notable: Before I bought this tablet/laptop I bought an Acer Aspire tablet / laptop which had exactly the same problem on my network.  I returned the unit for other reasons (quality of construction etc.), but he had the same OS (Win 8.1).  I don't know if she had the same network adapter.

  What I tried: cycling the router - cycling the modem - router the default factory reset of small animals - U-APSD deactivation on the network card - slapping me hard - offering to the gods...

  What I tried to try: tried to update the drivers for the Intel card using the Intel drivers update (adapter drivers for Win 8.1 and Intel PROset wireless), but he kept time during download because... THE NETWORK IS NOT STABLE! (ugh!)

  The installation program:

  Dell Inspiron 7347
  OS 8.1 win that perform all updates

  Network adapter: Intel dual band wireless AC 7265

  Router: Linksys BEFW11S4 Wireless-B to wide band
  Parameters:

  Host name:	(Required by some ISPs)
  Domain name:	(Required by some ISPs)
  Firmware version:	1.45.7, October 8, 2003
  LAN IP address:	(Address: 00-0C-41-C6-49-B1)
  	.  .  .  (IP address)
  	255.255.255.0 255.255.255.128 255.255.255.192 255.255.255.224 255.255.255.240 255.255.255.248 255.255.255.252 (subnet mask)
  Wireless:	(Address: 00-0C-41-C6-49-B1)
  	EnableDisable
  	SSID:
  	SSID broadcast: EnableDisable
  	Channel: 1 2 3 4 5 6 7 8 9 10 11 (field: us.)
  	WEP: MandatoryDisable
  Type of Internet connection:	(Address: 00-0C-41-C6-49-B2)
  	Obtain an IP automatically Static IP PPPoE (for users of SingTel) RAS PPTP Heart Beat Signal select the type of Internet connection that you want to use

  Router password:	(Enter the new password)
  	(Re-entry to confirm)
  UPnP services:	EnableDisable
  Restoration

  
  Default settings:YESNO

  Host name:
  Firmware version:	1.45.7, October 8, 2003
  Login:	Disable
  LAN:	(Address: 00-0C-41-C6-49-B1)
  	IP address: 192.168.1.1 Subnet mask: 255.255.255.0 DHCP server: Activated
  Internet:	(Address: 00-0C-41-C6-49-B2)
  	IP address: 67.249.54.246 Subnet mask: 255.255.224.0 Default gateway: 67.249.32.1 DNS: 209.18.47.61 209.18.47.62 0.0.0.0 Time remaining of the DHCP: 22:33:53

  DHCP server:	Turn off
  From the IP address:	192.168.1.
  Number of DHCP users:
  Client lease time:	minutes (0 means a day)
  DNS 1:

  
  .  .  . 2: .  .  . 3: .  .  . VICTORIES: .  .  .

  I'm puzzled.   Makes me CRAZY!

  FIXED!   Check it out guys.   I'm bothering with deactivation of all the resources of the card network, add-ins etc in the hope of this narrowing... including Bluetooth.   I have a Microsoft Bluetooth mouse for the comfort sculpt ([View:www.microsoft.com/.../sculpt-comfort-mouse:550:0])

  I turned off and BOOM... everything was fine.   Also, I noticed when it was powered up, the speedtest would plunge drastically when I actually moved the mouse during the test.   See below for the result of the test with the mouse.   I can't post a with the mouse on because the test wouldn't even with it on.

  

  Hmmmm... so it turns out that it could be a problem with a product from Ms... go figure.

• Inspiron Intel Wireless N 7260 with POOR performance

  The laptop was purchased 8/2014.  I'm having problems with my WIFI connection and our cable service provider out today.  They have isolated the problem to the laptop.  They proved this by running tests of speed on different devices.  This laptop was the only device that produces slow download speeds<6 mbps="" while="" the="" other="" devices="" are="" running="" anywhere="" from="" 50="" mbps="" to="" as="" high="" as="" 90="" mbps. ="" if="" i="" connect="" this="" laptop="" via="" ethernet="" it="" runs="" in="" the="" 90="" mbps="">

  WIFI on this device is an Intel Wireless N 7260 and the 16.6.0.8 driver version runs at 2.4 GHz only.

  Does anyone know if this is faulty (it passes all the tests) or is it something that needs to be upgraded already?  Y at - it an upgrade?

  jjdeadhead,

  Did you recently install/reinstall/upgrade the operating system?

  Have you tried the drivers from the Dell website? Go to drivers and downloads , enter your service tag, select your operating system, network, download the drivers and save them to your desktop.

  Do a system restore point.

  Go to Device Manager, network cards, click with the right button on the Intel® Dual Band Wireless-N 7260, left, click on uninstall. Tell him to remove the software and drivers. Then, restart your computer. When you connect, the new hardware wizard will try to install the drivers. Install the drivers that you saved on your desktop.

  Try these tweaks...

  Start, Control Panel, Manager of devices. Click Network and then right click on your network adapter, on the left, click on properties, power management. Uncheck the allow the computer to turn off this device to save power.

  Go to the options power and changed the wireless adapter setting, adjustment of maximum power for maximum performance.

  

  Rick

• Satellite A210-14 - strange problem with new WLAN adapter Intel 4965agn mm1

  The initially installed atheros wireless network adapter is just b/g and too slow for my network/needs

  So I bought a one n-project: mm1 4965agn (intel) (he got a toshiba p/n and s/n too)

  I replaced the atheros one and plugged the Intel - booted and installed the drivers - restart-> adaper works very well-> reboot - nb stops at the toshiba BIOS screen without loading all the windows. I can't even to the BIOS-> removed Intel wlan adapt nb boots and as usual.

  Please let me know what I need to do to make things work

  Hi chubbyhamster,

  To me, it sounds like this map isn't WLAN compatible with your laptop. I guess that all wireless network adapters are compatible with all laptops (assignment of pins e. g.).

  As far as I know use fast N project you need 3 antennas. I think Satellite A210-14 has just two antennas because only WIFI b/g card built in. This means that you can upgrade your laptop to the project speed N t.

  Alternative you can use the LAN card or a USB key which takes in charge the project N, but in my view, WIFI b/g standard should be fast enough

• I've updated the Mac driver for the 8600 and direct wireless printing is no longer works. V5.9.1

  I've updated the Mac driver for the 8600 and direct wireless printing is no longer works. The HP utility is v5.9.1, Mac OS x 10.7. I did the software update and a new driver HP was part of the package. HP ePrint still works, and print tests are okay for General network settings are intact. None of the applications that use the print dialogue box standard and local networking make it through the print queue. Any tips? Any way to roll back a driver version? Or quickly get the next revision and hope printing works again? Thank you.

  Update: OSX-specific Version is 10.7.5, model of the printer is HP OfficeJet 8600. See you soon.

  Hello

  Try to reboot the router and check if that can help you.

  After connecting the back of the router, wait 30-60 seconds and restart the printer and Mac.

  If it persists, try resettign the system as follows:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Select Print & Scan.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Now reconfigure the device by following the HP (under Utilities Applications\hewlett-Packard\Device) installation wizard.

  Please let me know if this can help,

  Shlomi

• Dell Latitude D830 and Intel® Wireless WiFi Link 4965AGN drops connection

  Hi all

  I hope someone can help me here. My laptop keeps giving up the connection to a modem within 20 seconds after the connection. I run XP Professional, my ISP is sky and I have a Netgear modem provided by Sky.

  I have another machine running Vista (an Acer Aspire 5670) here and I'm having no problem with stay connected on this computer.

  I am able to stay connected on any wireless network, except on my own modem. (I recently traveled and was able to connect in hotels, airports and conference centre without losing the connection once!)

  I recently moved and the problem existed at the old House and now in the new House too. Initially we thought it would be more aggressive radio trying to get a signal strong (er), abandoning the connection looking for another, but it only happens with this modem. There are approximately 11 other networks in range. I changed the radio signal to all channels, nothing did.

  Sky said it is not the modem and they can't send a new one because clearly there is no problem that the other laptop is connected correctly. I am at my wits end here because I couldn't stay connected wireless to the House since I have this laptop (almost 3 months now) HELP!

  PS, Connection to the LAN is no problem through the same modem, it's just the wireless connection connects and then abandoned.

  The Intel wireless event viewer shows:

  authentication, and then said: 'itinerant event of pilot '. Shortly after Unauthenticated (name SSID)

  link down

  Authentication is ok for these 20 seconds, I'm connected, I'm able to access e-mail and the internet

  
  

• Can I use Satellite R630 with Netgear and Intel wireless display technology

  Dear all,

  I am a user of a Satellite R630-105 (processor i3 M350). I would use this laptop with Wi - Fi on my plasma on the wall display. Recently, I heard about Intel wireless display technology connected to the Netgear adapter as a possibility for wireless connection to the screen.

  Can I use my computer with this technology? If so, what is the process? If not, is there an alternative, using cable is very inconvenient. I'm at the beginner level.

  Thank you very much, to come.

  Peter

  > I would like to use this laptop with Wi - Fi on my plasma on the wall display.
  Can you please me for what purpose you need this connection?
  I mean what kind of data you want to transfer?
  With other words you do exactly?

• I have a dell inspiron 1720 and in the windows Mobility Center that turning wireless on is grayed out.

  I have a dell inspiron 1720 and in the windows Mobility Center that turning wireless on is grayed out. It works very well for four years and all the time he was arrested. What should I do about it?

  Hi Scott,.

  You did it all change hardware or software on your computer before this problem?

  You can follow this link & check if it helps:

  Windows wireless and wired network connection problems

  
  Reference:  troubleshooting problems with wireless networks

  Hope the helps of information.
  Please post back and we do know.

• Wireless adapter installs - is msg not found wireless adapter and the adapter never turns on.

  HP desktop system

  Windows Vista

  Router DLink and compatible adapter for Windows 7

  Inserted the disc and MS for installing drivers appears

  Microsoft window pops up saying: these data are incorrect.

  Install the drivers updated the site Internet DLink and still wont

  SE msg not found wireless adapter and the adapter never turns on.

  Hi JRKellison,

  1. What is the model number of the router?
  2. What is the full error message that you receive?
  3. This is the first time you install it on the computer?

  Check and make sure that the adapter is properly connected to the computer.

  I suggest that you try to install the driver using compatibility mode and check if it works.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows