INSTALL a MODEM SEVERAL HP for VISTA

Similar Questions

• How can I go on the upgrade by installing Windows Media Player 11 for Vista 32-bit operating system?

  I had all sorts of difficulties to install Windows Media Player 11 for Vista Version 6.0 system.  Can someone direct me as to how to install Windows Media Player 11 on my version of Vista?

  Thank you

  SWright20

  Windows Media Player is not installed correctly and must be reinstalled

  Restart your computer.

  Start > Search box, type cmd > u glance, upper-left, right click oncmd.exe > press Run As Administrator > at the flashing pronpt, type unregmp2.exe /UpdateWMPVersion > press the Enter key
  Note: to avoid strike fault and bad spacing, it is best to copy and paste the command line above instead of typing.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Receive the error "Windows has stopped working" after installing the update of security for Vista (KB977165)

  I use Vista Business, I installed the update of important security for Vista (KB977165), after installing and restarting my computer, I received an error message that Windows has stopped working and then I get a black screen. I rebooted in safe mode and did a system restored. So currently I did not update.

  This happened to someone else? Is it I can do it fix it?

  Hello

  Since you get such a serious mistake, I would use the free incident reports.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• updates continue trying to install powershell 2 and winrm2 for vista... they keep failure... why and what I can do about it... be gentle with me please

  as above... its when I go to put the machine rest that icon was updated to powershell and winrm mode 2 requires me to attempt the install... it lasts for a few days and the update log is full of failed attempts.

  Hello Peter John Taylor.

  Thank you for your message.  Please see: you may receive a "0x8007F0F4" error code when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site for a possible solution to your problem.  We can't wait to hear back on your part.

  See you soon

• Error 800719E4 when you install the update of security for Vista(KB972270/KB978207/KB951847)

  Hello

  I need help for error of update of address 3 for Vista security:

  (1) 800719E4 error during the installation of update of security for Vista (KB972270)
  (2) Cummaltive security for Internet rexplorer 7 Vista (KB978207)
  (3) Microsoft.NET Framework 3.5 service pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 86

  Thank you

  See the section "How to get help", for example, http://support.microsoft.com/kb/972270

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After you install the updates of windows for Vista home edition, the computer tries to restart and then says "computer could not start", then begins to the Startup Repair. Suggestions, how can I fix?

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Welcome to the community of Windows Vista answers.

  First of all, we will try if we can start in safe mode.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Steps to start your computer in safe mode with networking
  1. to start mode safe mode with networking, restart the computer and press the F8 key for about four to five times. You will see "Safe Mode with network" listed in the advanced options of Windows.

  2. Select "Safe Mode with network" and then press ENTER.

  Access the link below for more information on how to start in "Safe Mode with Networking":
  http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

  The system restore.
  http://support.Microsoft.com/kb/936212

  Method 1:
  The restore of the system of Windows Recovery Environment (WinRE)

  (a) Insert Vista DVD and boot from the DVD.

  (b) that you want to start the computer from the Windows Vista DVD, you press a key, your keyboard when you see the prompt. You should now see a black screen with a white status bar at the bottom indicating that Windows is loading files... After some time, the status bar becomes completely white and you will see a screen indicating that Windows is loading. The environment of the installation of Windows continues to load and when finished you will be presented with a screen that prompts you for information about your location and language.

  (c) in this screen, you must configure the language to install, time and currency format and keyboard or options for method of entry so that they are well positioned. When done, press the next button. You will now be at the main Windows Vista Setup screen where you would normally install Vista on a computer.

  (d) because we want to repair the computer, you must click on repair your computer option. This will bring you to a new screen where the repair process get all facilities of Windows Vista on your computer. When finished, you will be presented with the System Recovery Options dialog box

  (e) select the Vista installation you want to repair.

  (f) in the system recovery options, click on system restore to restore the system.

  Method 2:

  Run the disk check Windows recovery environment to correct the bad sector on your hard drive

  (a) Insert Vista DVD and boot from the DVD.

  (b) that you want to start the computer from the Windows Vista DVD, you press a key, your keyboard when you see the prompt. You should now see a black screen with a white status bar at the bottom indicating that Windows is loading files... After some time, the status bar becomes completely white and you will see a screen indicating that Windows is loading. The environment of the installation of Windows continues to load and when finished you will be presented with a screen that prompts you for information about your location and language.

  (c) in this screen, you must configure the language to install, time and currency format and keyboard or options for method of entry so that they are well positioned. When done, press the next button. You will now be at the main Windows Vista Setup screen where you would normally install Vista on a computer.

  (d) because we want to repair the computer, you must click on repair your computer option. This will bring you to a new screen where the repair process get all facilities of Windows Vista on your computer. When finished, you will be presented with the System Recovery Options dialog box

  (e) select the Vista installation you want to repair

  (f) in the system recovery options, select command line and enter the command chkdsk/r.

  For the above two steps, you can see the link below.
  http://windowshelp.Microsoft.com/Windows/en-us/help/95b4c03a-ac42-49a4-a90d-8f3736a995271033.mspx

  Once you perform the restoration of the system, download the updates and install them manually one by one, this should help you knowing what update causes this problem.
   
  Concerning
  Amrihta.

• How to re-install the host of VBscript for Vista?

  I am running Vista Ultimate. I am trying to download a driver that supports this video stream to my TV material. When I try to download the driver, I get an error message saying the following: "VBScript engine is disabled so Setup cannot continue." Please enable VBScript engine before installation. I tried to correct the problem by recording "regsvr32 vbscript.dll" in command prompt, after which it is said that I managed, but I get the same error message when I try again to download the driver for my new hardware. The guys from support for the product, the driver is for, have suggested, I have re - install the Windows Scripting host from Microsoft Download center, but there is no product, I can find called 'Windows Scripting Host' or 'VBscript Host. " Nobody knows what the exact name of the thing, I should download to install again the host for VBscript?

  Thanks to everone who responded; the problem ended up being old pieces of McAfee always LURKING in my system, but I thought that he had been removed for a long time as I now use Norton. Unfortunately, the reason for which I tried to download the driver should first use my new HD Stream Warpia hardware that broadcasts wireless video and audio to my TV but a USB port on my PC and a HDMI port on my TV. The initial problem was that I couldn't get my PC to recognize my TV as an external monitor, or extend my desktop or my monitor in mirror. After finally being able to download the driver (whose Warpia support thought would solve my problem), I was disappointed to see that my PC still will not recognize my TV as an external monitor. I know that the material is good, and I know that I everything connected correctly because I was able to get the arrangement to work by simply follows a laptop running XP to my desktop PC runs Vista (which is the machine that did not work in this setting. I hooked in the past my office to another TV with a VGA connection, so I know that I do what I'm supposed to do in relation to connectivity. I'll post this question now, but if someone bed this has suggestions I'd love to hear ' em -.

• Can't activate Windows 7 after re - install, have the product key for Vista but not W7

  Hello

  My father-in-law asked me to help him with his laptop because he had a lot of problems with it. After a lot of work trying to solve the problems, we have decided to re - install Windows because it seemed to be the easiest solution. Unfortunately, it doesn't have the installation disc. After some research, I discovered that it is possible to download an ISO of Windows 7 on Digital River and put it on a USB key to create a pseudo reinstall drive. I looked under the laptop and saw that the product key was still visible on the sticker, so I moved and re-installed Windows 7 using a USB key that had the right file ISO on it.

  However, it is only after you have reinstalled Windows 7 that I realized that the laptop came with Windows Vista and which is what provided the product key. It seems that the laptop has been upgraded to Windows 7 after, but my father-in-law doesn't remember anything about it since it is not too good with computer and the laptop belonged to his son.

  Now, we have a new installation of Windows 7, but I can't understand how to activate it. I would really appreciate the help as I already put a lot of time on this and cannot find a solution.

  Thank you.

  Managed to find a working link to a file image of vista and installed on the laptop. Everything seems fine now.

  Thanks for the help.

• Install Lexmark 5600-6600 series for Vistas upgrade to Windows 7

  Windows 7 does not recognize my Lexmark 5650 printer was used once with my laptop scrapped under Vistas.

  Whenever I try to get it recognized that I get an error message no. Communication. Cannot find my original Lexmark installation disk.

  Request Driver Windows update does not work. Can you help me?

  Hi George,

  I see that for the printer Lexmark 5600-6600 series is not supported for the Windows 7 operating system from the link below.

  http://www.Lexmark.com/publications/pdfs/2007/5600-6600/v7677571_en.PDF

  I suggest you to install drivers in compatibility mode from the link below.

  Make older programs run in this version of Windows:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

   

  If the problem persists, I suggest you to contact Lexmark support from the link below.

  http://www1.Lexmark.com/en_US/about-us/company/contact-us.shtml

  I hope this helps.

• Cannot install the update of security for Vista (kb2479943).

  I get the error code 80070643. tried to repair of .net framework windows suggestions. for the two sp1 3.5 and 4. I also uninstalled and reinstalled the .net Framework. I run microsoft 2007 office. any help on what I can do to get this security update to install would be appreciated. Thank you. Michelle

  Hi Chelleabelle,

  One of the solutions proposed should help to solve the problem and see the answer in the following thread:http://answers.microsoft.com/en-us/protect/forum/protect_updating/windows-update/5b222491-1674-483b-b296-211fc3c3170e. Frankly, I bypass the first step and start with the second stage if this is the only update, you are having issues with that.

  I hope this helps.

  Good luck!

• Cannot install the latest display driver for Vista 32 - bit Equium A200

  Hi all

  I'm trying to update my display driver to the latest review posted for my laptop model Toshiba site but the performance of the installation executable I m returned with an error saying that my system is not compatible with the driver see 7.14.10.1461.

  In info makes it clear he compatible with an A200 (PSAE2).
  Someone at - it had a similar problem.

  Hello

  Just a question; What laptop graphics card does support?
  You have an Intel graphics chip or another chip?

• Security failure updades for Vista, but others have been installed.

  I could not install new updates of swecurity for Vista, AThey fail whenever I try to install them, other updates are installed without problem.

  1. open Windows Update by clicking the Start button, all programs and then click Windows Update.

  2. in the left pane, click view update history.

  3. find an update for Windows that has failed to install, and then double-click the update to view more information.

  Updates that have failed to install will display failed under status, next to the name of update.

  4. in the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.

  5. click on the links in the dialog box Windows Update under more information or help and Support to try to solve the problem, then try to reinstall updates by using Windows Update in Control Panel or by mail with the error code and maybe someone may be able to help others.

• Need drivers for sound card for Vista x 64 on Satellite P100-400

  Hello

  I have a Satellite p100-400 and that you have installed Windows Vista Ultimate x 64.

  Problem is I don't think the audio drivers for my laptop. I just installed the latest Realtek drivers for Vista x 64 (v1.79) and they still does not work.

  Can someone help me with this?

  P.S. I found odd when installing Realtek program, because what other 2 folders with 'vista' is ' vista x 64 "and the program installed its files in c:\program files (x 86)".

  Hello

  everything is clear to the point with:

  >
  > P.S. I found odd when installing Realtek program, because what other 2 folders with 'vista' is ' vista x 64 "and the program installed its files in c:\program files (x 86)".
  >

  What do you mean with this (x 86)? Have you installed the drivers from the Vista x 64 folder or both, or quite the installer?

  Maybe you should check this file Vista x 64...

  Welcome them

• No Windows Update for Vista

  I tried everything I know and I can't get Windows Update for Vista.  I tried Fixit, F8 during restart, but without success.

  Hello

  You don't tell us if you get the error codes or not.

  You need SP2 must be installed to support still available for Vista.

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• error with KB2446708 and KB2478663 for Vista updates

  I am trying to install KB2446708 and KB2478663 updates for vista, but I get an error 66 has code.  I tried to go to Microsoft and download it from there but then get the error that the KB2446708 is not applicable or blocked from my computer.  Any suggestions?

  Hello

  ·         Remember to make changes on your computer before this problem?

  Follow the steps in this article and check if that helps: error code '0x8007066A' or "66" when you use the Windows Update site or the Microsoft Update Web to install .net Framework updates http://support.microsoft.com/kb/2507641