install the Popup popup, by removing the last causes the two to go
I have a popup panel (I created manually in my .uir). In this Panel, I ask a new popup panel (created manually in the code). When I click ok on my second popup, its callback function called RemovePopup (2nd round of Panel), two windows pop up seems to go instead of just a 2nd and back to first.
Should it? I know there is a way (at least in my program) to work around this problem, but I first wanted to consult with experienced people
As clearly stated in the function, the parameter passed to the detrermines function which popup is removed:
If we remove all of the drop-down panels or only the active popup panel selects.
1 = all
0 = enabled only
You must not move the handle Panel to this feature: it is possible that every nonzero value is interpreted as a command "remove all". Typically, you call RemovePopup (0) to delete the last installed only popup.
Tags: NI Software
Similar Questions
-
(Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)
I tried all the recommended solutions that Windows can throw at me, and yet I still can't download these updates for some reason any. Whenever I run the program "Microsoft Fixit" he says it's a mistake and fixing it with success, but I still get the same error when you try to install the updates. I have checked for malware, scanning my computer everything and see nothing.
Hello
1. what troubleshooting steps are carried out to solve the problem?
2 were there any hardware or software changes made on the computer before this problem?
Method 1:
I suggest you to return the item and check if it helps:
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
Method 2:
Check out the link and check if it works:
Windows Update error 800b0100
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800B0100
Method 3:
I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.
Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.
How to solve the problem by running the clean boot in Windows Vista:
http://support.Microsoft.com/kb/929135Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.
Reference:
You can download updates manually from the link below:
http://www.Microsoft.com/downloads/en/default.aspx
It will be useful.
-
I try to install the two updates, they do not have continually it says error unknown 66A?
Hello
Is update fails with error code?
I would suggest trying the following methods and check if it helps.
Method 1:
Try a clean boot, and then try to install the updates.
How to solve problems using the boot in Vista:
http://support.Microsoft.com/kb/929135
Note: once you have completed troubleshooting, please be sure to try step 7 to reset the computer as usual.Method 2:
If it still fails, try to download and install the update manually by using the following link: http://www.microsoft.com/download/en/default.aspx
If there are still problems, install the update, reset the Windows Update components
Reset the Windows Update components: http://support.microsoft.com/kb/971058
I hope this information helps. Please get back to us if you have any other questions on this subject.
-
Is it possible to install the two 2014 of AutoCAD AutoCAD 2007 and on a Win 7 x 64 ultimate?
Original title: the two AutoCAD 2007 and 2014 on a Win 7 machine
Hi all
Is it possible to install the two 2014 AutoCAD AutoCAD 2007 and on a Win 7 x 64 ultimate machine? If so, how to install? That should be installed first please?
Thank you
chk the 'HammerHead' response from the link:
-
I pulled out and in firefox several times and also rebooted. Still no icons for the downloader (s). When I find a video on Youtube and start playing, I still see no way to summon either YOUTUBE VIDEO & AUDIO DOWNLOADER or DOWNLOAD HELPER (are they the same add-on?). I also went in the Firefox Options to see if certain configuration prevents these work packages; saw nothing of use.
Add-ons translator and screenshots of Nimbus - offered in the same e-mail of Mozilla as additional modules for the Downloader - installed with no problem and their icons appear on the masthead.
Thanks in advance for your ideasThe two managers are registered and active. Are their icons on any of the
toolbars?Type of topic: customization< enter > in the address bar.
In the new window, look for the icon. When you find it, press and hold
the left button on it and move it to where you want it to be.
You can move the icons you want here, but
some icons are locked in place.Type of topic: addons< enter > in the address bar to open your add-ons Manager.
Access key; < Control >(Mac: < command >)< shift > has)Select Extensions, locate the Add-ons. Press the Options
push button for each one and check the settings. -
We get a 641 error while trying to install the two updates of windows.
I get errow 641 and. I can't get two updates to the loaded window what to do
* Original title: Update window
Hello
1. What is the number of KB (Knowledge Base) the two Windows updates?
2 are you able to install some other updates?
3. were there any changes (hardware or software) to the computer before the show?
Please follow the steps mentioned below and get back to us with the results.
Method 1: run the Microsoft Fixit and see if it helps.
http://support.Microsoft.com/mats/windows_update/
Method 2: perform the steps in the article mentioned below and see if it helps.
http://support.Microsoft.com/kb/818018/Hope this information helps.
-
Install the two Win &; Mac versions of same series
I have the first Elements 9, which, with an installation separate disks for the version Windows and Mac.
The version of windows is already installed on my Windows 7 laptop and recorded at Adobe.
Now, can I install the version of Mac on my Macbook too? This may seem a stupid question as the number of these facilities will be the same.
I don't know if this is possible, or even if the fact once... one of them will not automatically be cancelled by Adobe (as it keeps the server connection).
Everyone thought or experienced cela?
Thank you!
Adobe allows two facilities of the program on the computers of the same owner. So, Yes, you're good.
-
Ideasms you have any problems with
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Hello
He's still trying to install? If so use the below, if not you can HIDE it from Windows Updates - right-click on LEATHER.
Then, you can download it from the Download Center and try to install it. Of course, be sure that you really need the
Update.MS Download Center
http://www.Microsoft.com/downloads/en/default.aspxI guess that part of the question could be a driver which is really old or similar should not be loaded.
This exit Windows updates on (after you have access) and stop the updates of the driver to load.
How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx---------------------------------------------------
You can use the solutions in this KB - 3 methods and I listed a little help for them below
The update is not installed successfully, you receive a message, and the computer restarts when you try to
install an update in Windows Vista
http://support.Microsoft.com/kb/949358Method 1: Start Windows Vista with the Windows installation media and use the repair feature
How to do a startup repair in Vista
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlYou can also do a safe mode startup repair to access the Recovery Options If you have them available
or use the DVD as described above.This tells you how to access the System Recovery Options
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxTry recovery options Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlMethod 2: Start the system in safe mode and then use the system restore feature
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.htmlYou can also do a restore of the system of starting with a Vista disk.
Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)
See article below for that.
You can use this method on the updates that have this problem.
http://support.Microsoft.com/kb/949358Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
and install it.Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspx------------------------------------------------------
Once you are in Windows I was running once again reset here as a precaution.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058Hope this helps sort it out for you.
Rob - bicycle - Mark Twain said it is good. -
That is to say the computer has an infection and turn on my protection against viruses (which is on) and buy their protection against the virus. Cannot run two updates from Microsoft and can not access all programs except the internet but don't let me download anything. Missing file is: tfswctrl
Hello
System Tools is a fake antivirus / spyware. We recently saw a lot as it was distributed through advertisements on legitimate websites unsuspecting when an advertising agency got threaten.
Whatever you do... do not buy this software.
Here is a link to instructions on how to remove it.
Good luck
-
Install the two JDeveloper 11 g and 12 c on the same computer?
Is it possible to install two JDeveloper 11 g and 12 c on the same computer? If possible, it's the additional configurations at installation time?
Hello
It is possible to install g 11-12 c the same machine.
When the function installation select a different directory for each of them. No additional things required apart from that...
See: https://blogs.oracle.com/mobile/entry/how_do_i_install_2
Concerning
Vincent
-
Original title: KB2619340 fails to install.
I installed the two recent Windows updates, the KB2619340 and the KB2596843 several times, but they do not have to install correctly. I am running WinXP SP3. Anyone know why?
Hello
You receive an error message? If so, then post back the exact error message.
Step 1: Run the following article fixit tool and check.
Diagnose and automatically fix common problems with Windows Update
http://support.Microsoft.com/mats/windows_update/
Step 2: Download updates from the Microsoft Download Center and install it.
http://www.Microsoft.com/download/en/details.aspx?ID=28469
http://www.Microsoft.com/download/en/details.aspx?ID=28530
For more information about updates:
MS11-092: Description of the update of security for Windows XP Edition Media Center 2005: 13 December 2011
http://support.Microsoft.com/kb/2619340MS11-094: Description of the update of security for the Microsoft Office for Word and Excel Compatibility Pack file PowerPoint 2007: 13 Formats December 2011
http://support.Microsoft.com/kb/2596843 -
Satellite Pro U200 - installing the audio driver on Win XP
I have a Satellite Pro U200 and there is no sound - sound fine when attached to the DynaDock, but not when its autonomous.
Device Manager there down as an existing audio device - I downloaded the driver audio from Toshiba Web site but when I try and install it says "the HD Audio bus driver is required and not found" I did a little research and found in necessary MS hotfix KB888111 which I installed it, but the audio driver will not even install - ideas?
Windows XP must install patch KB888111 and KB835221 MS site before installing the audio driver.
-so finally you need to install the two patches
-Download Realtek audio driver from the Realtek page
-remove the old driver its the laptop restart of Device Manager and install the new audio driver downloadGreetings
-
Download / install the OS 5.0 for 9630 phone without service test
I am owner of a storm and I REALLY need a test for non-touchscreen phone so I bought a Tour 9630 opportunity off of eBay. I need OS 5.0 and when I go to upgrade the OS using Desktop Manager, it says that I need an active subscription BlackBerry.
Anyone know how I can get the 5.0 OS loaded, so I can test my program?
I know that this is not a question of Java, but I wasn't sure of where to go.
Thank you!
It is not that hard, being a developer I have no post details because I thought sorta you would know what I meant.
When you install an operating system on your PC, you create a folder on your PC:
C:\Program Files\Fichiers Research In Motion\Shared\LoaderFiles\ * your OS file *.
Thus, the BONE folder is named with the version of the OS, as "8900 - v4.6.1.310_P4.2.0.127.
In this case two files, a nameed "GPRS", and the other will be called "JAVA".
What you would do is install the two 4.6, your operating system and OS 5.0. Now copy all the contents of the folder 5.0 on the contents of the file 4.6. Then, follow the same old instructions:
- Go to c:\program files Research in motion\apploader and delete the file named "vendor.xml."
- Plug in BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.
-
Is it necessary to install the 32-bit and the 64-bit version of Ps Cs6?
I downloaded a trial version and installed the two: the 32 and 64 version. I have a 64-bit desktop PC. Can I uninstall the 32-bit version?
You can, but you will lose some functionality.
-
Following the instructions, running the application, but nothing happens and repeat the same message that I need to install the new Adobe Application Manager to fix the problem! frustrating!
Do you use Windows or Mac computer?
Mac:
Maybe you are looking for
-
DAQmxCfgSampClkTiming NICARD 6031 PCI E and Visual C++ 6.0
To the attention of the customer or any other wellcome! -): I use a NICARD 6031 E PCI. I am also using Visual C++ 6.0. I declared a variable for an external CLOCK of SAMPLING ANALOG. I am providingThis CLOCK signal to the Dev1/PFI7 PIN entry m_sSampC
-
HP pavilion dv7-6178us: I need the bios password for my laptop HP dv7
I need my password of bios, there is no way that I can upgrade the software in this laptop without it.
-
Windows defender or something very similar should prevent installation RegWorks
RegWorks I think I want to post my question to Microsoft.When this program is first introduced, he looked as if he was recommended by Microsoft. I think that MS would do something and stop what is happening. It's annoying to have to go through all th
-
Recommendation for Lightroom GPU with 4K display?
I have a Geforce GTX 750 Ti with a 4K display and I wonder what I would win if I upgraded for example to a Geforce 960?Any thoughts?
-
Is it safe to use as part of a cluster of ESX3 VMFS volume and a bunch of ESX4 simultaneously?