Install utilities from recovery after a cleaning

Similar Questions

• IBM Thinkpad with XP Home Edition preinstalled but no XP installation CD. Will need to re - install XP from CD after planned hard drive upgrade. How can I create a CD to install XP from the installed system?

  Hi, I bought an IBM Thinkpad with XP Home Edition pre-loaded in 2005 (the XP key sticker is on the bottom of the laptop), but did not receive an XP installation CD - I understand, it is a common practice. I want to improve the internal hard drive (for a bigger) then you will need to re - install XP from CD. They tell me that there is a way to create the XP (on the CD burner) installation installation CD but have no idea how. I can't imagine I'm the only person to have had this problem. Can you tell me where I can find the instructions how to do this please? Any help is welcome. Thank you very much.

  There are many cloning utilities, but I recommend Acronis True Image. You can clone your hard drive, then use TI to the image of your system and to make incremental backups. MS - MVP - Elephant Boy computers - don't panic!

• Upgrade from versions after a clean install.

  We have a couple OSX machines in our shop under 5.5 Production Premium CS. It is necessary for me to each disk reformat for various reasons related to the upgrade of OS x Lion. After Lion and running, I want to then take this opportunity to upgrade to Adobe CS6, using licenses already, I own (but have never used).

  Should I turn off my CS5.5 licenses first? Maybe I need to reinstall 5.5 on the same computer again, just to have as a backup. Any advice would be appreciated.

  Should I turn off my CS5.5 licenses first?

  It is better to... Reformatting erases the activation information and * poof * it's gone and you will need to call support to reset the activations. And if you really wanan install CS5.5, install ITO before CS6 to avoid problems with the associations of files and programs for example try to invoke the wrong version of the bridge...

  Mylenium

• Not able to install the HP software after a clean install of win7, hpbi and harddisk.dll error

  Hello

  I bought a tm2 with win7 home x 64, my IT guy at the office have installed win7 ultimate x 64 and of course all the HP software was missing when I returned. Fortunately, they recorded the old files and I was able to locate the SwSetup folder and managed to install essential drivers.

  However, I miss all the HP software, which means that I can no longer find it not in the SwSetup folder or it will not be installed. I found the HP Touch Smart 'something' Center (folderHPTSLC) but I get the error "hp\bin\hpbi" and I found the Recovery Manager win7 HP homepage, but I get the error "hardDisk.dll.

  I am really a bit upset that I have to spend so much time to solve a simple problem, I have an intact recovery partition, a partition HP tools intact as well as all the files in the SwSetup folder, how can it be difficult?

  I want the software I paid and so far, I spent several hours looking for a solution to a seemingly simple problem (just provide the software on your hp, or at least one that reinstalls the Sw from the hard drive to the HP computer if you fear that your software may be used on other HP computers...).

  Can someone please provide me with is the solution to the problems mentioned above, a link to the HP Touch Center application work (although I have the files, he just moved there) or tell me how I can restart the installation of the HP software and driver that happens just after you have configured your win7?

  Thank you

  Geen

  I agree, our IT screwed up guy, they didn't even know the upgrade thing... :-/

  In any case, I found a way to install the software I was looking for, just unzip to a folder and run the .msi file in the src folder.

  Even if not all the applications had such a record, most of 'em had.

  After playing with the sw a bit, I realized that I didn't like it anyway, boy I'm glad, I wasn't going to come home!

  and btw, we bought a HP Mini and it was a nice little software, called AppInstl in his swsetup, actually just the sw file I was looking for. Of course the same thing happened with the Mini ('clean' installation), but with this app, that I managed to re - install all the sw I wanted without any problem, except QuickWeb, of course, but that seems to be a general problem.

  Seems to me that HP has also seen the need for a "easy install your software after clean install" app.  :-)

  Thanks for all your comments, my problem was solved!

  Rgds,

  Geen

• How to install Vista from recovery disks?

  HP Pavilion a6722sc, Vista 32 bit operating system.

  My hard drive warns against "imminent failure".

  I'll have to buy a new hard drive.

  I have the Vista recovery disks.

  HP says that recovery disks are only for repair purposes, do not to install a new window.

  Could someone please give some advice on

  How can I install Vista on the new hard drive?

  / L

  If the recovery discs came from HP or they are the ones that you made when the computer is new, then they will (or should) restore the computer to "like new" even on a new hard drive.

  My hard drive warns against "imminent failure" can save all data, pictures, music, etc. before the disk dies.

  Replace the drive before it dies, and perhaps that the data can be copied to the new disk - or try this:

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer/

• Where to download drivers and utilities Toshiba after a clean install?

  My new Qosmio X 500 is very slow, that just after the start and I want to do a clean install to remove unnecessary software (Norton, MS Office Trial, some utilities Tishiba) completely, but I want to assure you that I can always find and install utilities (Protection of the HDD, fingerprint reader, etc.) I want as well as drivers for all components (Webcam, bluetooth access keys)

  These things do not come to drive more and the page "downloads" on mytoshiba point to nothing at all

  Help, please! I wanted to do today, but cannot not even call anyone, as it is Sunday here :(

  If you want to have more portable computer fast, you should not do clean OS install. Just remove all things you need and also to disable some applications to start with Windows.
  All is the OS configuration issue.

  Please note that Toshiba recovery image has been tested and all hardware components will not function properly. With your new installation of operating system, sometimes you'll have some strange problems.

• put all my pictures from recovery disks 1-2-3 after re buting the computer tried to re install won't let me download them

  put all my pictures from recovery disks 1-2-3 after re buting the computer tried to re install won't let me download them help

  Hello

  Read the results of a problem similar to yours at this link Microsoft Answers:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-files/restore-backup-after-clean-installation/2b443d83-BFE9-4601-A055-a10e7ec7e183

  See you soon.

• After a clean install of Windows 7 pro on the Pavilion dv6-6147tx I have no access to the Universal USB po

  After a clean install of Win 7 pro on Pavillion DV6-6147tx I have more universal access to USB ports.  I can't find a driver to download HP downloads or disk 3 recovery disc. 3 USB ports o.k.

  I finally solved my problem of usb 2 with a NEC driver downloaded from HP believe it or not... He took a large sum oh hunting via other websites. My contact with the HP service is a waste of time.

  The pilot is SP47677. EXE from HP, it does wonders, but it does not appear on a search in the HP website.

  I solved my problem.

• No restore factory after a clean install of Windows 7

  Factory support key F11 RnR restores after a clean install of win7?

  I did a new install of win7 and installed a RnR last on my T410. When I tried F11 RnR, there is no option to restore with. My SYSTEM_DRV and Lenovo recovery xxxx exist and are suitable for all the files in them.

  I have recovery disks, but I just what to see if restore factory F11 works on this path.

  Fix. I had already understood what you were doing.

  I'll say it simple as I can:

  (1) installed at the factory

  The secret is windows 7 added windows re (recovery of win7 to the mix environment). Lenovo plant reorganizing this to factory support. This has created a hidden from the factory restore boot entry.

  (2) your installation "sideways", IE, cram lecteurC.

  This wax installation tips from lenovo. That is to say, no factory entry to move to the RNR standalone.

  (3) any property. do not delete anything. (such as SYSTEM_DRV).

  ==

  You have a dead now at the new disk space.  This works. Large.

  Use RNR and backup every week in a place (external). I know that it was not fun, but has been a learning experience.

  ==

  To clarify: (confusion)

  RNR is the main big daddy.  This is the main task is to rescue by using a backup RNR. Recovery (factory) is a subset, not exactly. This just transfers control to another entry for starting a recovery plant stuff. Thus, Rescue and Recovery.  I answer all the time about it. Yes, they look different, they are.

• Backups Time Machine missing after model clean install

  For a Mac using Time Machine to back up, is there a way to clean install OS X for a new internal SSD and keeps backups Time Machine historical which have been made using the previous internal SSD?  While as I use it to back up the new internal SSD TM, TM will show the backup history of both the previous internal SSD and the new (up to the capacity of the disc from the TimeCapsule).

  MacBookPro8, 2 I used Time Machine on a time Capsule TB 3 towards the rear for 2 years. No problems and shows 2.24 available 3 TB.

  Last night I did a clean model 10.11.5 install a new SSD, and a transfer application, the user accounts Migration Wizard, etc. Since the previous flash SSD disk internal (format / installed the new SSD, attached to the internal SSD previous via USB flash disk, then started in Recovery Mode to clean the installation model to the new internal SSD and when prompted did the previous internal SSD Migration Assistant).

  Everything no problem above went very well. But now when I "TimeMachine enter", I see that the most recent backup made (before the clean install).  The right navigation (which goes in reverse chronological order of the lower part of the screen to the top) seems to show the date on which the previous backups have been identified.  But if I click on a date, TM Finder main window does not scroll from that date. The top / arrow down buttons to the right of the main window of Finder TM also do not respond to clicks.

  So far as I can tell, I've lost all TM backups except the most recent. I have all saved data elsewhere outside time Capsule, so between that and the 1 backup, I can see in TM I have not lost anything.

  If I had done the Migration Wizard from the TimeCapsule rather than the previous internal SSD flash drive, would that have kept all historical TM backups?

  Thanks for any idea

  Time Machine, please press the shift-command-C key combination. The windshield will show the mounted volumes. All snapshots should now be accessible. Select the one you want and search for files to restore.

  If you need to restore from a backup of the hidden user library folder, first select a snapshot, and then press shift-command-G. A go to the folder dialog box opens. In this document, you enter the path to the folder. The dialog box will help you by automatically filling parts of the path when you start typing.

  The path starts with the slash character ("/"). Enter that. The rest of the parts is separated by slashes.

  The next part is the date and time of the current snapshot. Enter a '2', and the rest of the date should be filled in automatically. Press the right arrow key to access the end of the path. Enter a slash to start the next game.

  Next is the volume name (usually "Macintosh HD" unless you assigned a different name.) Start typing, then jump to the end and enter a slash.

  The next part is 'Users', followed by a slash.

  Then is your short user name. It is also the name of your home folder, which is represented by an icon of the House in the sidebar of a Finder window.

  Finally, enter "Library", and then press return. You should now be in the library folder. From there, you can move like in the Finder. You can also select another snapshot of the same folder.

• Re: How to install Windows from a recovery on a new hard disk media?

  Immediately after a Windows Update, my computer will not re-start. It says disk error.

  I could not start it from the recovery media and F8 would not work. I bought and installed a new hard drive. Now, when I put in the recovery media to install Windows on the new drive, it gives an error message.

  What this may be? Would I be able to install Windows from the recovery media?
  It is Windows 7 and laptop Satellite A500, 64 bit.

  Hello

  In General, you can install Recovery on each compatible HARD drive image so you should not be a problem in this regard.

  Please tell us what happens when you start installation of recovery. What error message?

  New HARD drive is recognized in the BIOS. Before you begin installation of recovery BIOS default value.

• After a clean install can I still get updates

  I came to the conclusion that I have to do a clean install and the company for the model mark I finally sent the operating system after 4 years now that I have (xp media center) came with sp2... but some how the jerk who took an illegal copy of xp pro also had put sp3 here... so when I do this may reinstall the sp3 from the ms site or I have to keep sp2 here until I can get a new copy of windows?

  And can I still get all the updates I've missed for the years spent 1 1/2?

  COPY of http://groups.google.com/group/microsoft.public.windowsxp.general/browse_frm/thread/93602a125bd8e133

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before connecting a flash drive, card SD or any other external disk to the computer:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  * HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install) *.
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need help, please start a new thread in this forum:

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After installing something from windows update my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turn off.

  Hello

  After installing something from windows update (about 300 MB in size) my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turns off.
  Then a window pops up saying "Startup Repair cannot repair this computer automatically.
  The details of the problem say;
  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
  Signature of the 04:65537 problem
  Signature of the problem 05: unknown
  Signature of the 06 problem: BadDisk
  Signature of the 09 problem: unknown
  Signature of the 10:1168 problem

  System Restore does nothing, and all the other tools of recovery. :(

  Please help, it will be much apreciated :)
  DOM

  If you are sure that the problems began immediately after installing a Windows Update, use the free support of MS here:
  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.  MS - MVP - Elephant Boy computers - don't panic!

• CD drive icons disappeared after I installed the Norton Recovery tool

  Original title: My CD drive icons disappeared after I installed the Norton Recovery tool

  I downloaded Norton Recovery tool, created the rebootable disc. Tested, everything OK. Then found all my readers of DVD disc including a player clone of Ebly, disappeared from "My Computer". They are always in my device manager, but have a yellow tag attached to each of them.
  Can someone tell me how to get back them?

  Good... got to step 5, then got confused (never been here before). Are you telling me to delete point 4, 4 d 36965 - etc? Or lower and upper values in mentioned in step 5

  Locate and then click the following registry subkey: this will expand the content of the key in the right pane of Regedit.

  
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  
  In panel right, if you have UpperFilters, right-click UpperFiltersand then click Remove.

  Click Yes to confirm the deletion of the UpperFilters registry entry.

  In the right pane, if you LowerFilters, click LowerFilters, and then click Remove.

  Click Yes to confirm the deletion of the LowerFilters registry entry.

  Exit the registry editor and restart the computer.

• After a clean install of Windows Vista, Intel Wifi card is installed and activated, but does not detect the network.

  Wireless card not working after a clean install of Windows Vista

  I did a clean install of Windows Vista Home Premium on my HP Pavilion of 32 bits. I've completely updated Windows via Service Pack 2. Given that the clean install, my wireless card, Intel (r) Wireless WiFi Link 4965AGN, was not able to detect all the networks. The Wifi card is listed under NICs as being installed and activated. the hardware on my laptop Wifi switch is set on "on" and the light is blue, indicating that the card is working.

  I can connect to the internet if I connect physically my computer to the modem with an ethernet cable wireless, so the modem isn't the problem. Other computers can connect to the wireless modem, so my Wifi modem functionality is not the problem. The problem with my computer.

  I tried to uninstall the Intel driver and reboot my computer with the generic driver. Install the driver generic, but my wireless card has not always worked. I then ran an update of windows, nothing helps.

  I tried to install the "Intel® PRO /? Wireless and WiFi Link"drivers for Windows Vista (32-bit 13.1.1.1 the latest version and the previous version 12.4.4.5 32-bit) for the Intel® Wireless WiFi Link 4965AGN directly from the Intel Web site at http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+WiFi+Products&ProductProduct=Intel%C2%AE+Wireless+WiFi+Link+4965AGN. The map didn't always work with a driver.

  In addition to the pilots, I also downloaded a tool of diagnosis of Intel (Intel® PROSet /?) Utility of WiFi wireless connection for Windows Vista 32 -? Bit). Said diagnostic tool the WiFi card is not installed or enabled, however, Device Manager maintains that he is also installed and active.

  Is there a problem that causes Device Manager to say that all is well with the card, but does not map to realize that they diminish the radio signals? Everything's fine, diagnostic, it just does not detect networks around him. Help, please.

  Hello

  The on/off switch actually works?

  Since it is an internal adapter to ensure it is enabled in the settings of configuration/F2 (BIOS/CMOS) often like you
  Start - so look at the screen.

  Have you tried the computer on other WiFi networks? You had a WiFi type problem before the
  Re-install of Vista?

  ---------------------------------------------------------------------------------------------------------------------

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.