Installation directory must be located on the local hard drive error

Similar Questions

• Installation directory must be located on a local hard drive

  during installation of the app, pop - up "Directory of Installation must be on a local hard drive" I don't know how to solve the problem

  Sorry to hear that you have run into this error.

  I didn't know this with edge inspect before, but a quick search shows that this error seems to happen in rare cases for many MSI-based installers.

  Here are some suggested solutions that seem to succeed:

  -Clear your %Temp% file, and then rerun Setup.

  In case you aren't familiar with doing so, see Solution 2 in this article for instructions: http://helpx.adobe.com/x-productkb/global/troubleshoot-unexpected-behavior-user-account-2. html

  -Force the installer to run with administrator privileges.

  To do:

  1. Locate the installation file MSI inspect dashboard that you downloaded.
  2. While holding the SHIFT key on the keyboard, do a right-click on the edge inspect MSI, then choose copy as path.
  3. Go to start > all programs > Accessories.
  4. Right-click on command prompt and choose run as administrator. This should open a command prompt window, labeled "Administrator:
  5. In the command prompt window, type msiexec /i (you must enter a single space after ' / i ').
  6. Right click in the command prompt window, and then choose Paste. This should paste the path to the MSI file that you copied in step 2 above.
  7. Press ENTER to execute the command.

  Let us know whether or not these help, or if you have any questions.

• How do I know if ESXi 4 OS installed on the local hard drive or SAN?

  Hello

  As above, how can I know if ESXi 4 OS installed on the local hard drive or SAN? average is ESXi SAN hard drive boot?

  Thank you

  The output looks like that ESXi is installed on the local disk (vmhba0).

      1 root     root       146778685440 Jul  8 11:16 mpx.vmhba0:C0:T0:L0
      119 917504 -rw-------    1 root     root          939524096 Jul  8 11:16 mpx.vmhba0:C0:T0:L0:1
      121 4193280 -rw-------    1 root     root         4293918720 Jul  8 11:16 mpx.vmhba0:C0:T0:L0:2
      123 138223680 -rw-------    1 root     root       141541048320 Jul  8 11:16 mpx.vmhba0:C0:T0:L0:3
      125 4080 -rw-------    1 root     root            4177920 Jul  8 11:16 mpx.vmhba0:C0:T0:L0:4
      127 255984 -rw-------    1 root     root          262127616 Jul  8 11:16 mpx.vmhba0:C0:T0:L0:5
      129 255984 -rw-------    1 root     root          262127616 Jul  8 11:16 mpx.vmhba0:C0:T0:L0:6
      131 112624 -rw-------    1 root     root          115326976 Jul  8 11:16 mpx.vmhba0:C0:T0:L0:7
      133 292848 -rw-------    1 root     root          299876352 Jul  8 11:16 mpx.vmhba0:C0:T0:L0:8
  

  Sizes, looks like you are using 2x146GB hard drives in RAID1.

  BTW. ls-lisa and fdisk-lu are two separate commands.

  André

• You can move a project to another location on the same hard drive?

  Hello!

  My project files in the htdocs of the Apache Server, however I recently had to install XAMPP and which meant a new copy of Apache placed in a different location on the same hard drive.     I would spend my projects in this same place.   Dreamweaver allows you to do this easily?

  It is an ideal location for the test on my Apache server.

  I could just move the files, but I don't know how Dreamweaver will react.

  Thanks for all your comments!

  ... John

  Absolutely,.

  Just move them to your regular Windows Explorer or anything on a Mac. Then change your site definition to point to the new location.

  Brad Lawryk

  Adobe Professional Community: Dreamweaver

  The Northern British Columbia Adobe user group: Manager

  Thompson Rivers University: Dreamweaver instructor

  My Blog from Adobe: http://blog.lawryk.com

• My motherboard has exploded and I have the hard drive. How can I copy the address book for a new installation on a new computer from the old hard drive?

  I have the old hard drive in a USB enclosure and connected to the computer again. I have installed firefox and you need to have the address book (critical) copied and inserted information from address book on the new computer. I hope that there is a file I can replace easily?

  Firefox send an e-mail, it's strictly a web browser.

  If you use Firefox to access your e-mail, you use "webmail". You must seek assistance from your service provider or a forum for this service.

  If your problem is with Mozilla Thunderbird, check out this forum for support.
  https://support.mozillamessaging.com/.../home
  
  or this one
  
  http://forums.mozillazine.org/viewforum.php?f=39

• Location for the second hard drive to 500-164 Pavilion

  Cannot find place to install the second hard drive in the box. Where it is installed?

  HP has not produced a manual upgrade. Please see this manual, because it could help you.

• Linux installer is unable to find the local hard drive

  I try to install CentOS 5.2 (a derivative of Red Hat Linux) on VMWare Fusion 2.01. I can run the Installer (graphical mode) to the point where he asks me how I want to partition my hard drive. At this point, I can't continue as Setup can not find a disk hard - the box saying 'select the (s) to use for this installation' is empty. If I click NEXT, I get an error (obviously). Any help would be appreciated.

  When you created the virtual machine, what type of operating system prompted you chose? CentOS 5.2, I would suggest RHEL5, since it is the guest of farm taken supported. The reason by selecting the correct prompt when creating virtual machine is important because it influences what virtual material is used, and some clients do not come with drivers for some hardware (and therefore will not recognize it).

• How will I know ESXi installed on the local hard drive or usb or SAN?

  Hi all

  Here, I have IBM Storage node flex and midsize, this storewize is divided in two. I want to know where my esxi os installed? all orders to find?

  Hello

  So you can run esxcfg-info-e and you will get your startup BACK type, it will be either visor-thin (means ESXi installable, means in general you are installed on the local disk or SAN), visor-usb (ESXi embedded, usually means you are installed on USB or SD or visor-pxe to PXE deployment.)

  If you want to go further, you can run ls-lisa/dev/discs and you should be able to identify your device initialization as one with a load of partitions, as the vm1.0000xxxx entries in the result below:

  ~ # ls-lisa/dev/discs

  Total 8784623329

  4 0 drwxr-xr-x 1 root root 512 31 Mar 14:25.

  1 0 drwxr-xr-x 1 root root 512 31 Mar 14:25...

  165 3921920 - rw - 1 root root 4016046080 31 Mar 14:25 mpx.vmhba32:C0:T0:L0

  155 4064 - rw - 1 root root 4161536 31 Mar 14:25 mpx.vmhba32:C0:T0:L0:1

  157 255984 - rw - 1 root root 262127616 31 Mar 14:25 mpx.vmhba32:C0:T0:L0:5

  159 255984 - rw - 1 root root 262127616 31 Mar 14:25 mpx.vmhba32:C0:T0:L0:6

  161 112624 - rw - 1 root root 115326976 31 Mar 14:25 mpx.vmhba32:C0:T0:L0:7

  163 292848 - rw - 1 root root 299876352 31 Mar 14:25 mpx.vmhba32:C0:T0:L0:8

  145 4389890880 - rw - 1 root root 4495248261120 31 Mar 14:25 naa.600c0ff00012e5abe64a345301000000

  143 4389889024 - rw - 1 root root 4495246360576 31 Mar 14:25 naa.600c0ff00012e5abe64a345301000000:1

  166 0 lrwxrwxrwx 1 root root 20 Mar 31 14:25 vml.0000000000766d68626133323a303a30-> mpx.vmhba32:C0:T0:L0

  156 0 lrwxrwxrwx 1 root root 22 Mar 31 14:25 vml.0000000000766d68626133323a303a30:1-> mpx.vmhba32:C0:T0:L0:1

  158 0 lrwxrwxrwx 1 root root 22 Mar 31 14:25 vml.0000000000766d68626133323a303a30:5-> mpx.vmhba32:C0:T0:L0:5

  160 0 lrwxrwxrwx 1 root root 22 Mar 31 14:25 vml.0000000000766d68626133323a303a30:6-> mpx.vmhba32:C0:T0:L0:6

  162 0 lrwxrwxrwx 1 root root 22 Mar 31 14:25 vml.0000000000766d68626133323a303a30:7-> mpx.vmhba32:C0:T0:L0:7

  164 0 lrwxrwxrwx 1 root root 22 Mar 31 14:25 vml.0000000000766d68626133323a303a30:8-> mpx.vmhba32:C0:T0:L0:8

  If in case of doubt, you can use partedUtil to check, enter the ID and plug into partedUtil, as follows: partedUtil getptbl /dev/disks/vml.0000000000766d68626133323a303a30

  If it is your boot device, you should see your systemPartition and all your Partitions ESXi...

  ~ # partedUtil getptbl /dev/disks/vml.0000000000766d68626133323a303a30

  TPG

  488 255 63 7843840

  1 64 8191 C12A7328F81F11D2BA4B00A0C93EC93B systemPartition 128

  5 8224 520191 EBD0A0A2B9E5443387C068B6B72699C7 linuxNative 0

  6 520224 1032191 EBD0A0A2B9E5443387C068B6B72699C7 linuxNative 0

  7 1032224 1257471 9D27538040AD11DBBF97000C2911D1B8 vmkDiagnostic 0

  8 1257504 1843199 EBD0A0A2B9E5443387C068B6B72699C7 linuxNative 0

  To further clarify, go back to your ls-lisa/dev/discs out and now you know that you have the right device, enter the path to your drive ID, in this case, mpx.vmhba32:C0:T0:L0, then run esxcli nmp storage devices list | grep mpx.vmhba32:C0:T0:L0

  and you will get your device nickname, so:

  
  

  ~ # esxcli list of nmp storage device | grep mpx.vmhba32:C0:T0:L0

  MPX.vmhba32:C0:t0:l0

  Device display name: USB Direct - access Local (mpx.vmhba32:C0:T0:L0)

  Hope this helps, this should be good for ESXi 5.x and above all, I believe, something you might need to sub partedUtil for fdisk.

  Good luck!

  vM

  -----------------------------------------------------------------

  VCAP-DCD / VCAP-DCA / VCP-Cloud / VCP - DT

  vMustard.com

• HP G71-329WM: driver Sata necessary for the installation CD of Windows to see the new hard drive

  I have my own Windows 7 disk that can be used to install a lean and clean the operating system, however, it seems that the hard drive is not recognized without a sata driver any. I had to do this once with an HP laptop so that the Windows Setup CD see the hard drive. Unfortunately, I do not see such a driver downloads available for this laptop model. Can make you a suggestion on where I can find this driver?

  Hello:

  With the material of your laptop, you should not need the driver but here is the link for those that you need...

  The first file is for 32-bit and one for 64-bit.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=18668&lang=eng

  To install the driver, download and uncompress the files that you need a USB FlashDrive without all records.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and I hope, will install W7.

• Lightroom CC - edition in the external editor with images located on the external hard drive problems

  I have recently moved most of my image containing folders on external hard drive. In general, everything works smoothly in Lightroom (running latest CC). However, if I try to use an external editor of in Lightroom, I managed opening image in Photoshop CC if it is chosen. However, if I try to edit in a NIK Collection programs (i.e. Viveza 2) or affinity Photo I get error messages. The copy of Tiff is generated within lightroom, but at the spearhead of the external editor the following messages are met...

  • Viveza 2 - 'News file. Plist could not be opened"
  • Photo of affinity - "'could not open the file - / Volumes/4Tb iMac/2015-10-20-202036/Macintosh of the castle of my book 2 Backup/Backups.backupdb/Neil HD/Applications/Adobe Illustrator CS5/Plug-ins.localized/Photoshop Filters.localized/Unsharp Mask.aip/Contents/Resources/he.lproj/InfoPlist.strings the file type is not supported.". " My external backup drive is " " " 4 TB my book 2 backup" but my images are on an external drive called "4 TB My Book 1" ".

  However, if I move the folders containing images of problem on my desktop (iMAC 27 2015) in Lightroom external editor command change... works very well. The images open with Nik Collection and Photo of affinity and save in Lightroom when save. Everyone knows about this problem? And if you have, is there a resolution?

  
  

  Any help/advice greatly appreciated.
  

  Neil

  Looks like I solved my problem with Lightroom. I disassembled my external backup drive, but upheld the disk external drive containing the photos up and then restarted my mac. After the reboot, I open Lightroom and chose the image on an external drive for mounting in affinity Photo and Collection of Nik. Both image successfully opened in editors. I reassembled the backup drive and rebooted time machine and repeated the same opening picture in external editors. Once again, works great. Have no idea where the original problem. Looks like a bad path was stored in a config somewhere file.

• ESXi 5.5 can't find the local hard drive

  Hello

  I ty to install ESXi 5.5 on SuperMirco X9SCL-F with adapter HBA LSI SAS 9211-4i, but installation can not find the disc hard space... can someone help me?

  After bios update of MB... the problem is solved

• loading html document stored on the local hard drive using the 'flash' button

  Hello! I use adobe cs 5.5 flash (action script 3), and I need to load an html document into my hard drive using the 'flash' button I tried navigateToURL (thanks kglad). Here is the code:

  quizstart_btn.addEventListener (MouseEvent.CLICK, arithmeticlesson);

  function arithmeticlesson(event:MouseEvent):void

  {

  navigateToURL (new URLRequest("file:///C:/quiz/truequiz.html)", "_blank");

  }

  But I want to play my flash file to the other computer. In order to access the truequiz.html, I'll make a folder named quiz to C:\.

  How can I load this html file to other computers without creating a folder to C:\? Sorry for the dumb questions. I'm new coding. Thanks in advance!

  Is there another html file that includes the swf file?  If so, it is in a different folder, then you need to adjust the path so that the swf file target html file as if it were in the same folder as the html page that incorporates.

  Are other than that, you getting any kind of error message from security to try to link to the page in this way?

  I really enjoyed my visit here.  We went in February, the coldest time of the year, and when I got my mother-in-law apologized for the cold, it was then that I was just there dripping with sweat.  Where I am now (upper NY) it is-10 degrees...  If here and there, I'd be a temperature controlled indoor environment.

• Cannot make a backup of the computer to reformat the external hard drive (error 0 x 80780029)

  Hello!
  I recently had to reformat (disk error problem) backup my drive (USB) hard external on which I did a complete PC. After reformatting the drive, I tried to make a new PC full to the top on it wihtout success because the old cliché could not be read ("reading of the volume shadow copy on source has no" error code 0 x 80780029), apparently, the backup and Restore Center kept in memory the old backup I did on my HDD reformat and seeks to go further. How can I get around this to remove the trace of old shadow copy and/or the complete PC Backup?

  Thank you very much in advance for your help

  Richard

  Hi Kevin!

  No indication of you... Should you the CBS.log?
  Still, I have the problem with the backup center and looking for an old backup restore complete PC that no longer exists (reformat the drive) and therefore prevent me to make a new complete PC on the USB disk reformat bacup.

  Thanks again for your help!

  Thatankha

• Deleting files from the external hard drive error

  I'm trying to delete photos refused for an external drive.

  I get the message:

  "The files are on a volume that does not support Trash. You want to remove them permanently? »

  I click on "Delete files permanently" and nothing happens.

  Any suggestions would be greatly appreciated.

  The format is Mac OS extended (journaled). I think I got it. It is on the folder permissions.

• Change the Local C drive letters

  * Original title: assignment of drive letters

  When I installed Windows 7 (home edition) earlier, I tried to assign the letter D for the reader, but the installation process would not allow this and kept failing the letter C. can I change this to D now?

  The reason why I need to do this is that I have a program more former that works only under DOS and it will not run on any other drive except C.

  I have a 'plug-in' (auxiliary) drive that is already formatted for FAT32 and I want to give this the letter C so that I can run my BACK from that program.

  This sounds like a practical solution that can be made without too much trouble?

  Hello

   
  Thanks for posting your query in Microsoft Community.
   
  From your problem description, I understand that you want to change the drive letter to D of C, so that you can run a program under the C drive with DOS operating system.
   
  Unfortunately this action is not allowed because the current operating system, to which you have started is located on the Local C drive.
   
  If you want to know the method of assignment or change the drive letter, I suggest you open disk management and assign the drive letter and check.
   
  a. open computer management by clicking the Start button, click on the Control Panel, clicking system and security, clicking Administrative Tools, and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
   
  (b) in the left pane, click Disk Management.
   
  c. If the hard drive is recognized in disk management and if there is no drive letter assigned, I suggest you do a right click on the drive and assign a drive letter and check if it helps.
   
  d. click on the player to change and then click on change drive letter and paths.
   
  Do one of the following:
   
  · To assign a drive letter if it has not already received, click Add, click the letter you want to use, and then click OK.
   
  · To change a drive letter, click on edit, click on assign the following drive letter, click the letter you want to use and then click OK.
   
  · To remove a drive letter, click on remove and then click Yes to confirm that you want to remove.
   
  Check this link for more information:
  http://Windows.Microsoft.com/en-us/Windows7/change-add-or-remove-a-drive-letter
   
  Hope this information helps, just reply to the State of the question to get help.