Deleting files from the external hard drive error

Similar Questions

• Cannot delete files from the external hard drive after copying using Robocopy

  Original title:! VERY DIFFICULT QUESTION! Files that cannot be deleted!

  I did a robocopy and he left during the night and when I came back it was in some kind of loop and my external hard drive was full. The files are not visible in Explorer and if I try to delete them in the command line that fails because some are too long. Urgent I need to redo the space on this external and copy the files to my parents and charity before fly me soon. Please can someone help me.

  * Looks like that I have multiple instances of the same files

  I don't know if you will be able to do this before your flight, but the drive must be partitioned and formatted, reformatted, or scanned for errors of NTFS file allocation table with repairs enabled. Depending on the size of the disk, this could take some time. You can also check statistics of SMARTDRIVE with a utility like Crystal Info disc to see if it is a failure.

  If you do not drive Professional recovery tools available, the native CHKDSK will do in a pinch.

  C:\Windows\System32>chkdsk /?
  Checks a disk and displays a status report.

  [CHKDSK [volume [[path] filename]]] [/ f] [/ v] [/ r] [/ x] [/ I] [/ c] [/ l [: size]] [/ b]

  volume Specifies the drive letter (followed by a colon),
  mount point or volume name.
  filename FAT/FAT32 only: Specifies the files to check for fragmentation.
  /F fixes errors on the disk.
  /V FAT/FAT32: displays the full path and the name of each file
  on the disk.
  On NTFS: Displays the eventual cleanup messages.
  /R Locates bad sectors and recovers readable information
  (implies / f).
  L:size NTFS only: changes the size of the logfile to the specified number
  of kilobytes.  If the size is not specified, displays currently
  size.
  /X force the volume to unmount it first if necessary.
  All open handles to the volume would then be invalid
  (implies / f).
  /I NTFS only: performs a less vigorous check of index entries.
  /C NTFS only: skips, checking of cycles within the folder
  structure.
  /B NTFS only: Re-evaluates bad clusters on the volume
  (implies / r)

  The /I or /C switch reduces the amount of time required to run Chkdsk by
  skip certain checks of the volume.

  Any routine review and car repair will take time. CHKDSK is no exception.

• I spilled coffee on my Macbook Air and does not illuminate.  How to transfer files from the external hard drive to backup my new Macbook Air?

  I spilled coffee on my Macbook Air and does not illuminate.  How to transfer files from the external hard drive to backup my new Macbook Air?

  If you had a Time Machine backup, you can use the Migration Wizard and connect your new Mac on the external drive which has the Time Machine backup: move your content to a new Mac - Apple Support

• Error code 80070570 0 x to copy the files from the external hard drive for pc under win 7

  I'm trying to copy files from my external hard drive to my pc.  I'm running Windows 7 on my dell Studio and get the error code 0 x 80070570 on several files. Says they are corrupt.  How can I solve this problem?

  Click Start > computer

  Right-click on the external hard drive

  Click Properties > tools

  Click check now to check your hard disk for errors.

  After it is finished, restart the system and try to copy the files again.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Unable to see the new files from the external hard drive in Windows Media Player library

  Original title: music is dead

  Windows media player does not recognize my external hard drive on all my computers windows 7, but works fine on my xp. has taken the laptop shop they led produced songs media player then reinstalled them, and it worked. but when I added more songs on the ext. harddrive and tried to play on windows media player 7 it does not find new! can't afford to take to the store whenever I have download music and want to play on my Media Player 7. is it auto recognition? When I plug the ext. harddrive inside automatically so reads the news on it?

  It has been fixed thought

  I had posted a question on my Ext. harddrive, my windows xp Media Player recognizes new music I have add out of it, but all my computers which are used to windows 7. then I myself especially when I add the new music on the hard drive for media playyer on xp I have spend the toolbar and click on file, then click Add to library computer search and it adds to the media player library. but windows 7 does not have this option. I noticed if you click file, and then manage libraries, and then the music lets me add my Ext. harddrive (e drive) to the library list. on a computer it support of new music and videos found on the hard drive, on two computers it just music, so I downloaded a song and a video on the hard drive, plugged into the computer and media player says that it has been updated of library, and yet there they never found the new files. Why have they changed? XP was so easy. new is not always better!

  Hi Bob,

  According the description preceding, Windows Media Player is not picking new music on the external hard drive.

  I suggest you to perform the following troubleshooters.

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/en-in/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Open the troubleshooter in the Windows Media Player library
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

  Post us the results once you try the steps above.

• How to move files from the external hard drive to the keywords WITH main drive?

  On a recent trip, I have uploaded thousands of images on an external hard drive that I used with my laptop. I keyworded and edited these files on the road.

  Back home, I want to move the files (keywords and all) to my permanent LR library that resides on a different hard drive. How can I do this transfer without losing the keywords?

  Thank you in advance.

  Hi Jessica,.

  There seems to be a confusion of terms here: the catalog is where LR stores all of its information (that your designated as LR library in your original post).

  While you were on the road, did you use LR to add keywords to photos, or have you used another tool? If you have used LR, you already have a catalog on the laptop, which you can then import into your main LR catalog (using import to catalogue option in the file menu). Let us know if you get stuck anywhere.

  Marc

• Cannot delete files on the external hard drive USB

  There are records that I can not delete on my external USB hard drive that I'm starting to suspect are connected to Windows updates related to Visual Studio who fail everytime I try to apply (this is another question I've waited in vain an answer for on Microsoft Connect).  These files have names like f95b13d78bd4c3a41d86.

  Here is an example of the message that I get trying to delete these folders:
  You need permission to perform this action.
  You need permission SYSTEM to make changes to this file.
  EULA.rtf
  etc, etc.

  Hello

  1 are logged as administrator?

  2 have you tried to delete the folder as an administrator?

  3. are you facing problems with Windows update?

  Method 1:

  I suggest to fully appropriate the folder and then try to delete.

  a. right click on the folder, and then click Properties

  b. click the Security tab

  c. click on Advanced, then the owner tab

  d. click on Edit, then your user name (make sure to check replace the owner of containers under..)

  e. click apply, then OK

  f. now, under permissions, click change permissions

  g. click Add, and then type your user name and click OK

  h. check the box allow under total control, and then click OK

  i. now, choose it replace all the child permission checkbox

  j. click OK, then apply, then on Close.

  Reference:

  Appropriating a file or a folder

  http://TechNet.Microsoft.com/en-us/library/cc753659.aspx

• I can't delete files from my external hard drive

  I tried the command prompts, but I have not tried to download all the programs 'Take Ownership'.

  I tried several times, but due to Error Codes: 0 x 80070570 I can't remove it. I'm running on Windows 7 HP laptop.

  There is no need to download anything, but you may need to take possession of your records - see here:

  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/24bdf172-2DBC-43b8-995d-a99b6a81413c/

• Cannot access the files from the internal hard drive that has been converted to drive external hard after the motherboard is dead

  I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

  I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

  Uhm... I think the issue here is a misunderstanding of what you watch.

  If you want to access your files from the old hard drive - you need to look in the right place.  If the old system was "Windows 7", "Documents and Settings" is the * wrong * place to look and "Users" would be the place to go.

  You * will * take ownership and change permissions on ALL (you want to propagate to all subfolders/files when do - to save time) in order to get them properly.

  New-->: Windows Vista/7 would have your files located in the directory 'Users' of the root of the drive - and then under your username.

  • \USERS\\Desktop\
  • \USERS\\Downloads\
  • \USERS\\Favorites\
  • \USERS\\Documents\
  • \USERS\\Music\
  • \USERS\\Pictures\
  • \USERS\\Videos\

  ... etc...

  Documents and settings to WIndows Vista/Windows 7 is a symbolic link and would lead to what you see if you tried to use it.

• How can I remove restrictions file from an external hard drive so I can view or access these files on any computer instead of just one file has first been created?

  I have an external hard drive that I loaded all my important files on all my computers. There is a file that I put in place restrictions to access, but it has been so long that I don't know how I did it or how to remove it. How can I remove restrictions file from an external hard drive so I can view or access these files on any computer instead of just one file has first been created? The computer that I created the folder of running Windows Vista. I am not able to access files in this folder from any other computer. It gives me the following error: "E:\School is not accessible. Access is denied. »

  Hi mango127,

  I suggest that you give all permissions for everyone on this folder and check if it works.

  "Access denied" error message when you try to open a folder

  http://support.Microsoft.com/kb/810881

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  If the previous step fails then I would suggest that you take the backup of this folder on the computer you were accessing and later to format the hard drive.

  How to use disk management to configure basic disks in Windows XP

  http://support.Microsoft.com/kb/309000

• How to transfer files from the old hard drive to a disc new hard, old hard disk has been removed?

  I had a hard disk going bad. Installed a new hard drive and the need to transfer files from the old hard drive. I have an external enclosure for the old hard drive and can connect by usb port.

  The process is fairly simple once you put the old drive in the external box. You can use the usual methods of copy and paste in Windows Explorer. If you copy files, complete folders, you can take a look at RichCopy.

  http://TechNet.Microsoft.com/en-us/magazine/2009.04.UtilitySpotlight.aspx

  Tom Ferguson

• any ideas on how to view the files from my external hard drive?

  my external hard drive is only showing my new files and not the rest. I tried already to show hidden folders. Any ideas pls?

  Hello

  · Did you changes to the hard drive before moving the new files?

  · What files are missing from the external drive?

  Connect the external hard drive on another computer and check if you are able to view and access these files.

• I want to copy files from one external hard drive to another and can not?

  Hello

  I try to copy the photo files and video from one hard disk to another.

  The donor 2 TB drive is formatted NTFS and the receiver is 1 TB OSX extended.

  There are about 72 000 photos and 475 GB in size. The 56 video about 226 GB files copied with some lacks but then make drag and drop made the other files of 5 or 6.

  I tried to drag and drop, but some files have been copied not. After a lot of research through what was had been transferred I found about 5,000 had not copied I then did drag and drop with each of the 20 files or if some copied OK.

  The troublesome files kept suggesting that a file "already exists" and stops the process when I clicked ok.

  I want to delete the NTFS drive and reformat for OS X extended and then replace them on the 2 TB drive.

  What I am doing wrong? Need me a software to copy?

  Select the drive in the disk, then Edit/restore utility and select your 2 TB drive in restoration since. This will probably reformat the external hard drive, erase all data.

• Moving files from an external hard drive to my computer

  I'm trying to move files from a disk external HARD connected to a router on my pc, and whenever I try to do the system show me a window with this message. IO error 0x8007045D error, I see a permission problem, then I configured for the 'Full' destination folder security access for everyone and nothing happened.

  Drive external hard there network permissions to connect with the computer and move files through the router?  Have already transferred files with the disc external hard connected this before?  It would work a lot better if you just connect the external hard drive directly on your computer.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• reloading the files of the external hard drive to the new computer laptop

  I'm trying to reloaded files etc. from an external hard drive to my laptop. I took the files of my old office that was on is way out, so just in case I lost them all I copied them. I tried setting up my external hard drive and transfer just a couple of files just to see if it would work. I sent them to my desktop from my laptop and they also went to my documents, but once the hard drive is disconnected files will not open. I do not know what I'm dong wrong as I am not very computor spirit, so that the answers would be useful in silly English thank you. Sorry to be so long-winded.

  Sheila

  Hello @shedeval

  I understand that you have copied your files on an external drive from your old computer.

  You tried to copy the files to the new computer, but when you disconnect the external hard drive the files are no longer accessible.

  I think that you have created or copied a shortcut to the new computer and not the actual files.  When you're logged out outside the new computer had more disk access to open files.

  I would like to redo the copy and when you finished externally, log out and then try again.

  Good luck!