Installation got 50%

I got the message to close the Explorer that I did and also brccmctl that he was not open so don't know what it is and do not download Flash Player.  Can you tell me what brccmctl please

It is the brother Print Control center.  Is what you want then try opening your task manager, and then search for all instances of "brccmctl" under the processes tab.  Once found, right click and select 'end of task.  After all entries have been deleted, try to reinstall.

Tags: Flash Player

Similar Questions

  • Installation of Boot Camp utility stopped working after that Win 10 Pro was made.  Installer got stuck on step 'realtek' audio  I restarted Windows, but Boot Camp does not resume or restart the Windows installation process-side utilities?

    How can I get the Boot Camp utility to install entirely in Win 10 Pro?  After winning 10 Pro was finished installing, the installation of Boot Camp process began but eventually got stuck at halfway through (for 20 minutes) on stage 'Realtek Audio.   A restart of Windows has not triggered a recovery or re-starting installation of the Boot Camp utility.  Windows, it works, but I have no utilities 'Boot Camp' and can not find any Boot Camp file stored on the side of Windows again.

    Please see Bootcamp 6.0 driver install interrupted for resolution.

  • XP sp2 installation got stuck__

    When the installation was going on the facility got stuck when the installation process window current eas

    Hi Jigarpatel,

    Thanks for posting. Complete installation or roll back? Also, is your XP start up correctly now, or is it always the SP1? In addition you can navigate to c:\windows. Here, you will find a file 'svcpack.log. Open that file and search for the word 'error' here you should find the error codes which will help us to determine why it has not ended. Error codes will look like 0 x 0000000 (with some of the 0s replaced with other characters). Copy and paste them into your answer here.

    I hope this helps! Shawn - Support Engineer - MCP, MCDST
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • M1V66UA #ABA: error installation software WLAN

    I just bought this laptop brand new from best buy. When trying updates noticed the support of hp wlan softare installation got the error message. Please help me. Thank you

    Hey,.

    You said that your HPSA said now that no update is available. This means that all updates have been made and that there is nothing to do right now. They could have just been stuck before.

    I can't say definitively one way or the other whether hardware or software that caused the problem.

    What I can tell you based on troubleshooting, you have done up to this point, it seems that the HPSA maybe just thought the update was done so it was asking you to do forever because it does not recognize that the phone had already installed. Which can sometimes happen. He seems to be dressed up to this point.

    If Windows only updates without a problem now the HP Support Assistant said that you are up to date and you do not receive error messages or performance issues now, then I think that the problem is solved now.

    If you agree, please click Accept as Solution button.

    If you want to say thank you for my effort, please use the Thumbs Up button.

    I hope that answers your questions!

    Have a great day!

  • installation install app creative cloud stuck at 0%

    Hi im very frustrated because the creation of clouds Installer got stuck at 0%. I stop Setup and started again, but I'm still stuck.

    I try to cancel the installation, but the program crashes

    I have an imac with ios 10.9.4 with 4 GB of ram

    previously, he had installed the application but accidentally deleted, and several days ago may not reinstall the creative Installer cloud , I photoshop cc, muse and others, but I have that flash and dreamweaver.

    Help me please

    Let me know if you encounter problems installing Adobe Creative Cloud applications as new installation.

    Update problem is resolved of restarting the system:

    my creative cloud application is greyed out

    https://forums.Adobe.com/thread/1308845

  • Flash Pro CS6, installation of Windows 7 64 bit PC installation hangs

    New download of Flash Pro CS6, initially tried to install on a PC running Windows 7 64 bit. Installation got stuck and does not respond to the step "Installation AdobeHelp" (about 30% in the installation.

    I then tried to install it on a PC running Windows XP 32-bit, and it's exactly the same thing.

    I am unable to go further - someone at - it advice?

    When your system crashes, open your task manager > process and close with adobe.  installation should go ahead.

  • Oracle Net Configuration Assistant Installation failure

    I'm installing 11 G R2 on Fedora 12.

    Installation got 95% and shows the following error
    [INS 20802] Oracle Net Configuration Assistant failed

    Naturally he is said to have a look at the InstallActions newspaper that said to check the trace log. The lines of last 100 or so of the trace log is below, anyone can help as to where I can begin to solve this problem?

    INFO: Started named Plugin: Oracle Net Configuration Assistant
    INFO: Found associate job
    INFO: From 'Oracle Net Configuration Assistant.
    INFO: From 'Oracle Net Configuration Assistant.
    INFO: Parsing of command line arguments:
    INFO: Setting "orahome" = /u01/app/oracle/product/11.2.0/dbhome_1
    INFO: Setting "orahnam" = OraDb11g_home1
    INFO: Setting "instype' typical =
    INFO: Setting "inscomp' = ano, machine virtual Java, client, server, oraclenet
    INFO: Setting "insprtcl" = tcp
    INFO: Setting 'cfg' = local
    INFO: Setting "authadp" = NO_VALUE
    INFO: Setting "responsefile" = /u01/app/oracle/product/11.2.0/dbhome_1/network/install/netca_typ.rsp
    INFO: "Silent" parameter = true
    NEWS: Fact parsing command line arguments.
    INFO: Oracle Net Services Configuration:
    INFO: Profile complete configuration.
    INFO: Oracle Net Listener startup:
    INFO: Listener control running:
    INFO: /u01/app/oracle/product/11.2.0/dbhome_1/bin/lsnrctl start LISTENER
    NEWS: Auditor complete control.
    INFO: Beginning of earpiece failed.
    NEWS: Check the file path for more details: /u01/app/oracle/cfgtoollogs/netca/trace_OraDb11g_home1-10040811AM5707.log
    INFO: Oracle Net Services Configuration failed. The exit code is 1
    INFO:
    CAUTION:
    INFO: Finished named Plugin: Oracle Net Configuration Assistant
    [root@fedora1 logs] # cd/u01/app/oracle/cfgtoollogs/netca
    [netca root@fedora1] # ls
    netca_OraDb11g_home1 - 10040811 AM 5707 .log trace_OraDb11g_home1 - 10040811 AM 5707 .log
    [netca root@fedora1] # cat trace_OraDb11g_home1 - 10040811 AM 5707 .log
    [main] [2010-04-08 11:57:08.620 EST] [NetCALogger.initTrace:203] Oracle Net Configuration Assistant: 10040811 AM 5707
    [main] [2010-04-08 11:57:08.637 EST] [NetCALogger.initTrace:204] Oracle home: /u01/app/oracle/product/11.2.0/dbhome_1
    [main] [2010-04-08 11:57:08.638 EST] [NetCALogger.initTrace:205] Base Oracle: / u01/app/oracle of
    [main] [2010-04-08 11:57:08.638 EST] [NetCALogger.initTrace:206] The Oracle Home name: OraDb11g_home1
    [main] [2010-04-08 11:57:08.717 EST] Setting [InventoryUtil.getOUIInvSession:347] YES READ at ACCESSLEVEL_READ_LOCKLESS
    [main] [2010-04-08 11:57:08.718 EST] [HAUtils. < init >: 188] Yes location/u01/app/oraInventory/ContentsXML
    [main] [2010-04-08 11:57:08.741 EST] [Version.isPre:274] version to be checked 11.2.0.1.0 version to check main against10
    [main] [2010-04-08 11:57:08.742 EST] IsPre.java [Version.isPre:285]: return FALSE
    [main] [2010-04-08 11:57:08.759 EST] [OCR.loadLibrary:308]
    Constructor inside the OCR
    [main] [2010-04-08 11:57:08.776 EST] [OCR.loadLibrary:316] Going to load the library of ocr
    [main] [2010-04-08 11:57:08.777 EST] [sPlatform.isHybrid:67] = Linux osArch osName = i386 rc = false
    [main] [2010-04-08 11:57:08.784 EST] [sPlatform.isHybrid:67] = Linux osArch osName = i386 rc = false
    [main] [2010-04-08 11:57:08.784 EST] [Library.load:254] Library loading /u01/app/oracle/product/11.2.0/dbhome_1/lib/libsrvmocr11.so
    [main] [2010-04-08 11:57:08.975 EST] [OCR.loadLibrary:318] responsible for the ocr libraries
    [main] [2010-04-08 11:57:08.975 EST] [OCR.isCluster:939] Call OCRNative for isCluster()
    [main] [2010-04-08 11:57:09.051 EST] [OCR.isCluster:943] Results of OCR = true
    [main] [2010-04-08 11:57:09.052 EST] [OCR.isCluster:955] Boolean result = false
    [main] [2010-04-08 11:57:09.055 EST] [CmdlineArgs. < init >: 110] The initialization of the array of variables...
    [main] [2010-04-08 11:57:09.055 EST] [CmdlineArgs. < init >: 116] Initialization of NetProperties...
    [main] [2010-04-08 11:57:09.063 EST] [CmdlineArgs.initArgs:133] Initializing the command line arguments...
    [main] [2010-04-08 11:57:09.063 EST] [CmdlineArgs.parseLogParam:290] The argument/log analysis...
    [main] [2010-04-08 11:57:09.079 EST] [CmdlineArgs.parseLogParam:345] Return = null logfile
    [main] [2010-04-08 11:57:09.083 EST] [CmdlineArgs.setOraArgs:236] Configuring the Oracle arguments...
    [main] [2010-04-08 11:57:09.083 EST] [CmdlineArgs.setOraArgs:240] Past Oracle Home = /u01/app/oracle/product/11.2.0/dbhome_1
    [main] [2010-04-08 11:57:09.083 EST] [CmdlineArgs.setOraArgs:243] Read Oracle Home = /u01/app/oracle/product/11.2.0/dbhome_1
    [main] [2010-04-08 11:57:09.084 EST] [CmdlineArgs.setOraArgs:246] Read Oracle Home ID =
    [main] [2010-04-08 11:57:09.084 EST] [CmdlineArgs.setOraArgs:249] Read Oracle Home name = null
    [main] [2010-04-08 11:57:09.084 EST] [CmdlineArgs.compareOraHome:183] Comparing Oracle homes...
    [main] [2010-04-08 11:57:09.084 EST] [CmdlineArgs.compareOraHome:184] Home Oracle 1 = /u01/app/oracle/product/11.2.0/dbhome_1
    [main] [2010-04-08 11:57:09.085 EST] [CmdlineArgs.compareOraHome:185] Home Oracle 2 = /u01/app/oracle/product/11.2.0/dbhome_1
    [main] [2010-04-08 11:57:09.085 EST] [CmdlineArgs.compareOraHome:224] Returns the value true
    [main] [2010-04-08 11:57:09.085 EST] [InitialSetup.configureOPS:4504] The cluster mode is turned OFF
    [main] [2010-04-08 11:57:09.085 EST] [InitialSetup. < init >: 4028] TNS_ADMIN is: null
    [main] [2010-04-08 11:57:09.092 EST] [OPSUtil.getHomeVersion:446] GetHomeVersion inside...
    [main] [2010-04-08 11:57:09.092 EST] [OPSUtil.getHomeVersion:447] oracleHome = /u01/app/oracle/product/11.2.0/dbhome_1
    [main] [2010-04-08 11:57:09.092 EST] Oracle.sysman.assistants.util.OracleHome [OPSUtil.getHomeVersion:451] object = /u01/app/oracle/product/11.2.0/dbhome_1
    [main] [2010-04-08 11:57:09.092 EST] [OracleHome.getVersion:877] Called OracleHome.getVersion. Current version: null
    [main] [2010-04-08 11:57:09.096 EST] Setting [InventoryUtil.getOUIInvSession:347] YES READ at ACCESSLEVEL_READ_LOCKLESS
    [main] [2010-04-08 11:57:09.096 EST] [OracleHome.getVersion:896] HomeInfo /u01/app/oracle/product/11.2.0/dbhome_1,1
    [main] [2010-04-08 11:57:09.449 EST] [OracleHome.getVersion:922] OracleHome.server.getVersion Version: 11.2.0.1.0
    [main] [2010-04-08 11:57:09.449 EST] [OracleHome.getVersion:943] The current Version of the inventory: 11.2.0.1.0
    [main] [2010-04-08 11:57:09.449 EST] [OracleHome.getVersion:948] using sqlplus: /u01/app/oracle/product/11.2.0/dbhome_1/bin/sqlplus
    [main] [2010-04-08 11:57:09.450 EST] [OPSUtil.getHomeVersion:452] Return Version 11.2.0.1.0 = oracleHome
    [main] [2010-04-08 11:57:09.450 EST] [OracleHome.getVersion:877] Called OracleHome.getVersion. Current version: 11.2.0.1.0
    [main] [2010-04-08 11:57:09.450 EST] [OracleHome.getVersion:943] The current Version of the inventory: 11.2.0.1.0
    [main] [2010-04-08 11:57:09.450 EST] [OracleHome.getVersion:948] using sqlplus: /u01/app/oracle/product/11.2.0/dbhome_1/bin/sqlplus
    [main] [2010-04-08 11:57:09.450 EST] [InitialSetup. < init >: 4041] Location of the admin is: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin
    [main] [2010-04-08 11:57:24.074 EST] [ConfigureProfile.setProfileParam:136] Definition of NAMES. DIRECTORY_PATH: (TNSNAMES, EZCONNECT)
    [main] [2010-04-08 11:57:24.100 EST] [ConfigureProfile.setProfileParam:136] Parameter ADR_BASE: / u01/app/oracle
    [main] [2010-04-08 11:57:24.107 EST] [HAUtils.getHASHome:583] Oracle of the properties of the system: /u01/app/oracle/product/11.2.0/dbhome_1
    [main] [2010-04-08 11:57:24.108 EST] [HAUtils.getCRSHome:540] How to configured CRS / home for Oracle home (/ u01/app/oracle/product/11.2.0/dbhome_1)...
    [main] [2010-04-08 11:57:24.109 EST] [GETCRSHOMEUtil. < init >: 76] ToolName: getcrshome - tool rental: /u01/app/oracle/product/11.2.0/dbhome_1/srvm/adminTool dependencies: [Ljava.lang.String;@472d48
    [main] [2010-04-08 11:57:24.110 EST] [IsCmdScv [NativeSystem.isCmdScv:471]: cmd =]
    [main] [2010-04-08 11:57:24.111 EST] [RuntimeExec.runCommand:75] Runtime.exec () call with the command
    [main] [2010-04-08 11:57:24.111 EST] [RuntimeExec.runCommand:77] / bin/sh
    [main] [2010-04-08 11:57:24.111 EST] [RuntimeExec.runCommand:77] - c.
    [main] [2010-04-08 11:57:24.113 EST] /U01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/getcrshome [RuntimeExec.runCommand:77]
    Wire [2] [2010-04-08 11:57:24.126 EST] [StreamReader.run:61] in StreamReader.run
    [main] [2010-04-08 11:57:24.126 EST] [RuntimeExec.runCommand:142] RunCommand: wait for the process
    [Thread-1] [2010-04-08 11:57:24.130 EST] [StreamReader.run:61] In StreamReader.run
    Wire [2] [2010-04-08 11:57:24.253 EST] [StreamReader.run:65] ERROR > / u01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/getcrshome: error while loading shared libraries: libocrb11.so: cannot enable executable stack as shared object requires: permission denied
    [main] [2010-04-08 11:57:24.253 EST] [RuntimeExec.runCommand:144] RunCommand: treat returns 127
    [main] [2010-04-08 11:57:24.254 EST] [RuntimeExec.runCommand:161] RunTimeExec: output >
    [main] [2010-04-08 11:57:24.254 EST] [RuntimeExec.runCommand:170] RunTimeExec: error >
    [main] [2010-04-08 11:57:24.254 EST] /U01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/getcrshome [RuntimeExec.runCommand:173]: error while loading shared libraries: libocrb11.so: cannot enable executable stack as shared object requires: permission denied
    [main] [2010-04-08 11:57:24.254 EST] [RuntimeExec.runCommand:192] Return of RunTimeExec.runCommand
    [main] [2010-04-08 11:57:24.281 EST] NativeSystem.runRemoteExecCmd [CmdToolUtil.doexecute:372] failed. Command = /u01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/getcrshome arguments = env [] = null
    [main] [2010-04-08 11:57:24.345 EST] [HAUtils.isHASConfigured:349] Ignoring the exception in isHASConfigured: PRCT-1011: cannot run 'getcrshome '.
    [main] [2010-04-08 11:57:24.345 EST] Oracle.cluster.deployment.ClusterwareInfo.getConfiguredCRSHome (ClusterwareInfo.java:423) [HAUtils.isHASConfigured:350]
    oracle.sysman.assistants.util.hasi.HAUtils.getCRSHome(HAUtils.java:544)
    oracle.sysman.assistants.util.hasi.HAUtils.getHASHome(HAUtils.java:604)
    oracle.sysman.assistants.util.hasi.HAUtils.isHASConfigured(HAUtils.java:345)
    oracle.net.ca.InitialSetup.checkHAConfiguration(NetCA.java:4653)
    oracle.net.ca.InitialSetup. < init > (NetCA.java:4075)
    oracle.net.ca.NetCA.main (NetCA.java:405)
    [main] [2010-04-08 11:57:24.346 EST] [InitialSetup.checkHAConfiguration:4691] HA Server is NOT configured.
    [main] [2010-04-08 11:57:24.348 EST] [NetCAResponseFile. < init >: 68] Initialized response file: /u01/app/oracle/product/11.2.0/dbhome_1/network/install/netca_typ.rsp
    [main] [2010-04-08 11:57:24.350 EST] [NetCAResponseFile.getInstalledComponents:107] Installed the components of response file: server, net8, Java virtual machine
    [main] [2010-04-08 11:57:24.350 EST] [NetCAResponseFile.getVirtualHost:164] Virtual host of the answer file: null
    [main] [2010-04-08 11:57:24.350 EST] [SilentConfigure.performSilentConfigure:174] Profile configuration type.
    [main] [2010-04-08 11:57:24.351 EST] [ConfigureProfile.setProfileParam:136] Definition of NAMES. DIRECTORY_PATH: (TNSNAMES, EZCONNECT)
    [main] [2010-04-08 11:57:24.351 EST] [ConfigureProfile.setProfileParam:136] Parameter ADR_BASE: / u01/app/oracle
    [main] [2010-04-08 11:57:24.353 EST] [SilentConfigure.performSilentConfigure:182] Configuring the typical listener.
    [main] [2010-04-08 11:57:24.423 EST] [ConfigureListener.isHASConfigured:1425] The api call SRVM to see if Oracle Restart is set...
    [main] [2010-04-08 11:57:24.423 EST] [HAUtils.getHASHome:583] Oracle of the properties of the system: /u01/app/oracle/product/11.2.0/dbhome_1
    [main] [2010-04-08 11:57:24.424 EST] [HAUtils.getCRSHome:540] How to configured CRS / home for Oracle home (/ u01/app/oracle/product/11.2.0/dbhome_1)...
    [main] [2010-04-08 11:57:24.424 EST] [GETCRSHOMEUtil. < init >: 76] ToolName: getcrshome - tool rental: /u01/app/oracle/product/11.2.0/dbhome_1/srvm/adminTool dependencies: [Ljava.lang.String;@472d48
    [main] [2010-04-08 11:57:24.424 EST] [IsCmdScv [NativeSystem.isCmdScv:471]: cmd =]
    [main] [2010-04-08 11:57:24.424 EST] [RuntimeExec.runCommand:75] Runtime.exec () call with the command
    [main] [2010-04-08 11:57:24.425 EST] [RuntimeExec.runCommand:77] / bin/sh
    [main] [2010-04-08 11:57:24.426 EST] [RuntimeExec.runCommand:77] - c.
    [main] [2010-04-08 11:57:24.426 EST] /U01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/getcrshome [RuntimeExec.runCommand:77]
    [Thread-4] [2010-04-08 11:57:24.439 EST] [StreamReader.run:61] In StreamReader.run
    [Thread-4] [2010-04-08 11:57:24.439 EST] [StreamReader.run:65] ERROR > / u01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/getcrshome: error while loading shared libraries: libocrb11.so: cannot enable executable stack as shared object requires: permission denied
    [main] [2010-04-08 11:57:24.440 EST] [RuntimeExec.runCommand:142] RunCommand: wait for the process
    [main] [2010-04-08 11:57:24.440 EST] [RuntimeExec.runCommand:144] RunCommand: treat returns 127
    [Thread-3] [2010-04-08 11:57:24.440 EST] [StreamReader.run:61] In StreamReader.run
    [main] [2010-04-08 11:57:24.441 EST] [RuntimeExec.runCommand:161] RunTimeExec: output >
    [main] [2010-04-08 11:57:24.441 EST] [RuntimeExec.runCommand:170] RunTimeExec: error >
    [main] [2010-04-08 11:57:24.441 EST] /U01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/getcrshome [RuntimeExec.runCommand:173]: error while loading shared libraries: libocrb11.so: cannot enable executable stack as shared object requires: permission denied
    [main] [2010-04-08 11:57:24.443 EST] [RuntimeExec.runCommand:192] Return of RunTimeExec.runCommand
    [main] [2010-04-08 11:57:24.443 EST] NativeSystem.runRemoteExecCmd [CmdToolUtil.doexecute:372] failed. Command = /u01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/getcrshome arguments = env [] = null
    [main] [2010-04-08 11:57:24.444 EST] [HAUtils.isHASConfigured:349] Ignoring the exception in isHASConfigured: PRCT-1011: cannot run 'getcrshome '.
    [main] [2010-04-08 11:57:24.444 EST] Oracle.cluster.deployment.ClusterwareInfo.getConfiguredCRSHome (ClusterwareInfo.java:423) [HAUtils.isHASConfigured:350]
    oracle.sysman.assistants.util.hasi.HAUtils.getCRSHome(HAUtils.java:544)
    oracle.sysman.assistants.util.hasi.HAUtils.getHASHome(HAUtils.java:604)
    oracle.sysman.assistants.util.hasi.HAUtils.isHASConfigured(HAUtils.java:345)
    oracle.net.ca.ConfigureListener.isHASConfigured(ConfigureListener.java:1428)
    oracle.net.ca.ConfigureListener.isHASRunning(ConfigureListener.java:1450)
    oracle.net.ca.ConfigureListener.validateListenerName(ConfigureListener.java:1697)
    oracle.net.ca.ConfigureListener.typicalConfigure(ConfigureListener.java:169)
    oracle.net.ca.SilentConfigure.performSilentConfigure(SilentConfigure.java:185)
    oracle.net.ca.InitialSetup. < init > (NetCA.java:4159)
    oracle.net.ca.NetCA.main (NetCA.java:405)
    [main] [2010-04-08 11:57:24.444 EST] [ConfigureListener.isHASConfigured:1436] Is Oracle configured Restart: false
    [main] [2010-04-08 11:57:24.445 EST] [ConfigureListener.isHASRunning:1465] Is Oracle Restart running: false
    [main] [2010-04-08 11:57:24.445 EST] [ConfigureListener.typicalConfigure:201] Check free beach port: 1521-1540
    [main] [2010-04-08 11:57:24.445 EST] [ConfigureListener.isPortFree:1010] Check whether the port 1521 is free on the local computer.
    [main] [2010-04-08 11:57:24.446 EST] [ConfigureListener.isPortFree:1023] InetAddress.getByName (127.0.0.1): /127.0.0.1
    [main] [2010-04-08 11:57:24.446 EST] [ConfigureListener.isPortFree:1025] The local host IP address: fedora1/127.0.0.1
    [main] [2010-04-08 11:57:24.446 EST] [ConfigureListener.isPortFree:1027] Local host name: fedora1
    [main] [2010-04-08 11:57:24.447 EST] [ConfigureListener.isPortFree:1039] Creating ServerSocket on Port: 1521, IP address: fedora1/127.0.0.1
    [main] [2010-04-08 11:57:24.467 EST] [ConfigureListener.isPortFree:1042] ServerSocket created successfully.
    [main] [2010-04-08 11:57:24.468 EST] [ConfigureListener.isPortFree:1039] Creating ServerSocket on Port: 1521, IP address: fedora1 / 0:0:0:0:0:0:0:1
    [main] [2010-04-08 11:57:24.468 EST] [ConfigureListener.isPortFree:1042] ServerSocket created successfully.
    [main] [2010-04-08 11:57:24.468 EST] [ConfigureListener.isPortFree:1055] Creating ServerSocket on Port: 1521, local IP address: /127.0.0.1
    [main] [2010-04-08 11:57:24.469 EST] [ConfigureListener.isPortFree:1059] ServerSocket created successfully.
    [main] [2010-04-08 11:57:24.469 EST] [ConfigureListener.isPortFree:1065] Creating ServerSocket on Port: 1521
    [main] [2010-04-08 11:57:24.469 EST] [ConfigureListener.isPortFree:1068] ServerSocket created successfully.
    [main] [2010-04-08 11:57:24.469 EST] [ConfigureListener.isPortFree:1088] Back is free to Port 1521: true
    [main] [2010-04-08 11:57:24.470 EST] [ConfigureListener.typicalConfigure:208] Using the port: 1521
    [main] [2010-04-08 11:57:24.500 EST] [ConfigureListener.setListenerParam:1779] Parameter ADR_BASE_LISTENER: / u01/app/oracle
    [main] [2010-04-08 11:57:24.502 EST] [ConfigureListener.isPortFree:1010] Check whether the port 1521 is free on the local computer.
    [main] [2010-04-08 11:57:24.502 EST] [ConfigureListener.isPortFree:1023] InetAddress.getByName (127.0.0.1): /127.0.0.1
    [main] [2010-04-08 11:57:24.503 EST] [ConfigureListener.isPortFree:1025] The local host IP address: fedora1/127.0.0.1
    [main] [2010-04-08 11:57:24.503 EST] [ConfigureListener.isPortFree:1027] Local host name: fedora1
    [main] [2010-04-08 11:57:24.503 EST] [ConfigureListener.isPortFree:1039] Creating ServerSocket on Port: 1521, IP address: fedora1/127.0.0.1
    [main] [2010-04-08 11:57:24.504 EST] [ConfigureListener.isPortFree:1042] ServerSocket created successfully.
    [main] [2010-04-08 11:57:24.504 EST] [ConfigureListener.isPortFree:1039] Creating ServerSocket on Port: 1521, IP address: fedora1 / 0:0:0:0:0:0:0:1
    [main] [2010-04-08 11:57:24.504 EST] [ConfigureListener.isPortFree:1042] ServerSocket created successfully.
    [main] [2010-04-08 11:57:24.505 EST] [ConfigureListener.isPortFree:1055] Creating ServerSocket on Port: 1521, local IP address: /127.0.0.1
    [main] [2010-04-08 11:57:24.505 EST] [ConfigureListener.isPortFree:1059] ServerSocket created successfully.
    [main] [2010-04-08 11:57:24.505 EST] [ConfigureListener.isPortFree:1065] Creating ServerSocket on Port: 1521
    [main] [2010-04-08 11:57:24.505 EST] [ConfigureListener.isPortFree:1068] ServerSocket created successfully.
    [main] [2010-04-08 11:57:24.505 EST] [ConfigureListener.isPortFree:1088] Back is free to Port 1521: true
    [netca root@fedora1] #.

    I said that it was free. I would lie to you and the other thousands of people who visit these forums?

    All Linux, LINUX ALL, MUST be free.
    Support can be.
    Extensions are not.
    But Linux is free thanks to Mr. Torvalds.

    And Hans gave you the links. All you had to do is to click on one to find out.

  • download RealPlayer has stopped working

    RealPlayer Downloader worked very well in FireFox and explore. I did a Windows Update and the Realplayer downloader doesn't work anymore.

    Hello

    Have you tried just to re - install RealPlayer (or level to the new RealTimes)?

    I had the same problems in the past, but a re-installation got things going again (at least for me. I do not, however, promise anything...)

        B.R.

  • Impossible to install the Raid drivers from the USB on the Tecra S series

    I tried to install the Toshiba RAID drivers (you know things F6) using a USB and emulating the BIOS USB FDD, well that detected the installation got XP file sytem was unknown.

    Any help?

    Hello

    If you use Windows XP RAID driver cannot be installed on the USB. It is not possible.
    You can install the RAID driver using only the drive FDD USB and floppy.

    But Windows Vista recognizes the USB and the RAID driver might be installed in this environment.

    So what OS and device do you use?

  • A60: screen freezes saying ATI2vag file problem

    l have a display driver problem and l don't know what to do. assistance is needed.

    I have a PC laptop toshiba A60 with an ATI mobility radeon 7000igp pilot and the screen freezes often calm saying problem of file ATI2vag.
    I uninstalled and then re-installed with the tools backup drive, the problem is still there. I went to the ATI site to try a set date and this would fail, as the laptop came with pre-installed drivers, could not find a.

    Installation got to ati display driver, then an INF error video driver not found message. It says go to toshiba for updates, that's what l collect, but toshiba, s display driver is the same version that already have an l there is no update.

    Can I try now. HELP PLEASE.

    Hello

    Usually, you should always use the graphics drivers Toshiba because other drivers from the manufacturer s are not designed for the use of the laptop. Graphics drivers from Toshiba are slightly different because they have a thermal protection.

    So if you are not able to find an update of the graphics driver for your laptop then I would recommend to check the different laptops that have the same graphics card and try to use this driver.

    Concerning

  • Cannot start to OSX after using boot camp

    Hey everybody

    I have a Macbook pro 13' (2015) with display of keratina, 2.7 i5, 8 GB of RAM and 128 GB Flash storage.

    The problem started when I decided to run the boot camp on the device, everything went well until the installation of boot camp on windows 10. The installer got stuck in the process, so I left it. Then I went to the OSXRESERVED partition and I found the boot camp folder but when I tried to open it to re-run the installation program, I got an error message saying that the file cannot be opened and its corrupt. Then I formatted this partition using windows (how stupid on my part). And now I can not start back to OSX.

    I tried to go to the recovery of the Internet then disk utility. I see that the partition I made for windows that is only 40 GB. And there's "virtual whole disk", which is written in red. When I click on check, he said that the drive should be repaired, when I clicked on the repair. The same warning showed once again that the disc must be repaired.

    Also I tried to restore using time machine backup, but as I mentioned it won't give me access to the other partition is the 80 GB one. Instead, it shows only the 40 GB one and its not enough storage to restore the backup with.

    Sorry I took so long and I appreciate everyone's help, thank you.

    Hi Tayar98,

    Please visit Apple support communities. Congratulations on your new MacBook Pro!

    It seems that you cannot boot to OS X or restore from a backup Time Machine after that a partition has been formatted using Windows install.

    You should maybe erase and repartition your hard drive MacBook Pro before restoring from Time Machine backup. You can use the procedure described in disk utility (El Capitan): partitioning a physical disk:

    Erase and repartition a device

    You can delete all volumes on a device and create new ones. For example, if you want to change the plan of partition of a USB key, lightning or other storage of Master Boot Record Partition GUID carte device. If you just want to delete a volume, see to delete a volume.

    WARNING: Deleting and partitioning device destroys all data on all volumes of the device.

    1. Select the device in the sidebar you want to erase and re-partition, then click the Erase button .

      Note: You cannot erase the device that contains your boot volume.

    2. Enter a name for the original volume.

    3. Click the context menu of the card, and then choose a format for the initial score.

      For MS-DOS, and ExFAT partitions, the name must be 11 characters or less.

      • Map of Partition GUID: Used for all Mac computers with Intel processor.

      • Master Boot Record: Used for partitions Windows will be formatted under MS-DOS (FAT) or ExFAT.

      • Apple Partition map: Used for compatibility with Mac computers with PowerPC processor.

    4. Click clear, and then click done.

    Best regards.

  • Satellite P25: How to reinstall the original software without original car work?

    I have a P25 who lost his screen and dvd.
    The screen is black with a low light (control problem charts I am told by Toshiba repair - requiring parent = USD1000 map change).

    The DVD (Mat * u UJ - 809?) produces noise, but is not recognized by Windows.

    So I now use it as a desktop with external display, keyboard, and DVD player.

    As with all windows installation got clogged so now, things I had to reinstall the Windows MC supplied with the machine. However, the recovery DVDs running from an external DVD drive does not work.

    Because it boots I get a message BACK that is not DVD and an A > prompt.
    I can install a new version of XP, but then I miss the features of MC and need to install all of the P25 drivers manually.

    I would be very grateful if someone could help.

    (If someone would have a great idea on the screen as well, please let me know)

    Thank you
    Tom

    Hello
    I can not say what tests your repair service ran, but the problem of the screen could probably be an Inverter problem. As for the problem of dvd. I heard that need laptops Toshiba Toshiba external CD/DVD to boot or otherwise it won't work. I have never tried so I can't attest to that, but it could very well be probably that. Assuming that your CD/DVD is listed in the hardware with a yellow exclamation point Manager to do this, start-> run-> regedit then proceed as follows.

    go to hkey_local_machine, then system, CurrentControlSet, Control, then class.
    {4D36E965-E325-11CE-BFC1-08002BE10318} this is your cd/DVD. Once there in the list on the right check a component called filter haunted, click it, click on remove and then delete. Then do the same for the UpperFilter. Remove both filters and then right-click on my computer on your desktop. Go to properties-> hardware-> Device Manager. Right click on your cd/DVD and click on disenstall. Go to the top, then click on search of new material. It should find your cd/DVD and reinstall the driver, without any conflict. I hope this helps.

  • Setup will not be replaced despite the same upgrade code

    Hello again,

    I recently upgraded from LabVIEW 8.5.1 LabVIEW 2010.  This exposed the code upgrade to me for the first time in the Installer properties.  I have 3 installers for my product.  Ideally they would replace each other, but at the moment (or at least in the recent past) simply replace themselves.

    I wanted to make sure that that would still be the case after this update, so I installed an older version of a basic product, then a newly reconstructed version of basic, and it replaced the old (as determined by looking at the Add/Remove Programs list).

    However, when I tried the same test with the full version, the newly created Installer has NOT replaced the previous installation of the full version.  I have read on this forum upgrade Codes and pulled out my old project file (8.5.1) to make sure I don't accidentally hit the button "Generate new code for upgrade", but of course, when I opened it in LabVIEW 2010, she had the same code to upgrade to the full version of the current program.

    Can someone tell me why it would replace another product with the same upgrade code?

    In the form of extra credit, can anyone tell me if there is a way to change my installers at the moment so that they will not only replace older versions of themselves, but also now replace them as well?  I'm guessing that the answer is no, it is not possible, but just thought I'd throw out there, just in case.  I thought to change all codes upgrade to be the same, but it is more important for my clients to be able to upgrade their existing versions correctly and then to be able to change the versions correctly (not i.e. not leave the old version listed as installed).

    Let me know if I need to clarify anything; I believe that this post has been somewhat less clear I like it.

    Thank you

    -Joe

    Well, I realized that somehow my Installer got marked as 'auto increment product version' and started a version number less than my previous version, which explains why it has not replaced the previous version despite having the same upgrade code.  I corrected to have a higher version number, and then it worked, replacing the old version as expected.

    I'll mark this solution (which feels a little weird to mark my own post ), but I'd still appreciate it if someone has a magic solution to the question of additional credit in the original post.

    See you soon,.

    -Joe

  • Help! I can't play my new game

    I just bought the Sims 3 and installed this game. At the beginning the game would begin for some time and closing. I've uninstalled and reinstalled twice and now it will not open at all. I tried to update the computer and nothing has worked. I just got this computer a few months ago and don't see why I can't play my game.

    Hi courtneyh9,

    It seems that the original installation got corrupted and you do not have to uninstall the game completely. Since you just bought the game recently, we will try to do a system restore and configure your computer to a time before the problems started. Here are the instructions to perform a system restore:

    The System Restore tool

    If the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

    To restore the operating system to an earlier point in time, follow these steps:

    1. click on Start, type System Restore in the Search box, and then click System Restore in the programs list. If you are prompted for an administrator password or a confirmation, type your password or click continue.

    2. in the System Restore dialog box, click choose a different restore point, and then click Next.

    3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

    4. click on Finish.

    The computer restarts and system files and settings are back to the State they were in when the restore point was created.

    Let us know how it works and if you want more information.

    Dave D
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • HP LaserJet P1005: LaserJet P1005 does not not with Win10

    Hello

    I upgraded to win 10 (from Win 7), after which my LaserJet P1005 continued to work, but not for all software. So I decided to search the drivers updated and found your support site with the basic package Driver for this printer.

    I tried to install, but installation is stuck at first without an error message. That's when the trouble started, because now my printer not working not at all, and no pilot at all move no more.

    A list of what I've tried so far is below.

    Please help with new suggestions!

    -Deleted all the facilities at HP, printer removed from Windows, all cleaned up registry, power off devices and rebooted the system. Then tried to install the base driver pack, but it got stuck again (after 10%).

    -Authorized to everything again, as above and I tried to install the older driver full pack which worked partially after Win10 update. Installation got stuck. No action of the printer.

    -At this point the printer is even not detected by Windows as a new USB device.

    -Restored Win10 to the point just after the upgrade. The printer appears in Windows devices again, but it's offline and it stays that way, everything that I try (followed all the steps on your support site)

    -Tried several different USB ports. The printer works fine with laptop Win7, so the cable, the printer and the power are very good.

    -Then, I tried to run all the HP diagnostic tools (print and scan the doctor etc) but they tell me that this printer is not supported. In a desperate try, I installed the basic driver pack again and this time he DID install completely. However... She is still offline, and it stays that way.

    -J' have an error (yellow triangle) in Windows device, where it is said: Quest Software USB key cannot start because configuration files or registry damaged. But I'm not sure that this has nothing to do with the printer. The printer, however, does not appear in the list of devices in Windows.

    Thanks for providing this information @Bastienne.

    When the installation is stuck? (when he is looking for the printer, before searching for the printer)

    Remove the USB cable plugged in, remove the printer from the Device Manager.

    Under Universal Serial Bus Controllers look for yellow exclamation, impression USB Mass Storage Device Support point or anything with an unknown device. Right click and uninstall the device. Disconnect and reconnect the USB cable and it must be reinstalled automatically print driver. How to make in the Windows Device Manager? If you still get the yellow exclamation point, let me know.

    If you still have problems please delete the old printer registry files.

    Back up the registry first, before performing any of these steps. Back up the registry.

    For computers not HP:

    Press the key R and Windows, open the Run dialog box.

    Type regedit and press OK.

    Click on the + sign next to the following:

    HKEY_CURRENT_USER\Software and delete the folders of HP/Hewlett-Packard.

    HKEY_LOCAL_MACHINE\Software, and delete records of HP/Hewlett-Packard.

    For HP computers:

    Press the key R and Windows, open the Run dialog box.

    Type regedit and press OK.

    Go to the editing tab, and then click search.

    In the search box, type "laserJet P1005" and click Next.

    Only some of them will be related to the printer, and they will have an idea in the description. When it finds one of the entries, and you have confirmed that it is related to the printer, within reasonable doubt, you can remove it by pressing Delete on the keyboard.

    Once an entry is deleted, press F3 on the keyboard, which means find next.

    Repeat the process until all entries printer 'laserJet P1005' are deleted.

    Restart the computer.

    Perform a clean boot on the computer and disable the Antivirus software. How to perform a clean boot in Windows.

    Please describe in detail the best you can of what steps you have taken and what happens during the installation, I hope we can get this figured out soon. Thank you.

Maybe you are looking for