Installation Guide for Sun storage VMWare sim?
Hi all
Is there an installation to the next product guide?
http://www.Sun.com/storage/disk_systems/unified_storage/resources.jsp
With the download installation guide is just basic config, it needs more once it is running and its not obvious to a person like me non-soleil.
same happened to me... don't worry - once you have the webgui running road is easy ;-)
___________________________________
VMX-settings- VMware-liveCD - VM-infirmary
Tags: VMware
Similar Questions
-
Is there an installation guide for upgrade memory for Satellite L?
UK
Is there an installation guide for memory upgrades?
Recommend where to get the memory chips Toshiba?
thanx
Mike
Hey Buddy,
Can you please tell us what Satellite you have exactly?
I ask this question because I also have laptop Satellite L: Satellite L300. The more manual, you will find information about RAM upgrade and photo live what you have to remove and other important information.
Check it!Theoretically you can buy each manufacturing modules but I recommend high quality of Kingston for example modules. I still only good experience with these modules.
-
Installation guide for BPM SOA Suite and Oracle 11g
Does anyone know of a good installation guide for a new installation of the following SOA and BPM of Oracle 11 g (Windows 64 bit)?
I'm looking to the 'Setup Guide quick for Oracle SOA Suite and Oracle Business Process Management Suite 11 g Release 1"(http://download.oracle.com/docs/cd/E14571_01/install.1111/e14318.pdf), but it is a bit dated (April 2010) and I see that is missing a few steps.
Thank youTake a look at the for Oracle SOA Suite 11 g 1 material (http://www.oracle.com/technetwork/middleware/soasuite/overview/quickstartguidesoasuite11gr1ps3-313245.pdf) Quick Start Guide.
The steps that do not appear in the document you mentioned are included in this document. It takes you through the necessary extra step for the installation of Oracle BPM. Although for 11.1.1.4, it works very well for implementing 11.1.15 in a DEV environment.
Dan
-
Link on the installation guide for content Portlet Suite 11 g Release
Hi all
Anyone knows the link to get the installation guide for dissemination of content Portlet Suite 11 g.Hello
I also had this problem initially, but in my case I had missed on the following steps:
1.
From a command line, run the WebLogic Scripting Tool (WLST), for example:
WLS-HOME/as11r1wc/common/bin/wlst.sh
Note:
The script of WebLogic (WLST) tool is a script command line that you can use to create, manage, and monitor WebLogic Server domains. See the Oracle Fusion Middleware Oracle WebLogic Scripting Tool for more information.
2.After initializing the script of WebLogic tool, type connect() and press ENTER.
3.You are prompted to enter the user name, password and server URL Admin. Enter the following values and press ENTER.
4.Once connected to the server, run the following command to register your WSDL:
registerWSRPProducer('webcenter','Provide_Any_Name_for_WSDL_Handle','Your_WSDL>',timeout=500)
For example:
registerWSRPProducer (' webcenter', ' StellentWSRP ',' http://Host_Name:Port / SPC/portlets/wsrp1? ") WSDL ", timeout = 500)
Referencing your content server
WLST following controls should be used to create, delete and reset an Oracle Content Server connection:
Note:
Custom managed server on which CPS is deployed and the WLS_Spaces server must be restarted after you run the following commands to make the changes take effect.*
Run the following command from WLST to create an Oracle Content Server connection:
createJCRContentServerConnection ('CPS_Application_Name', 'CSConnection', socketType = 'socket', 'Content_Server_Host' = serverHost, serverPort = 'Content_Server_Port')
For example (if the CPS application name is StellentPortlets):
createJCRContentServerConnection ('StellentPortlets', 'CSConnection','192.0.2.250 = ', serverPort = ' 4444' serverHost, socketType = 'socket')
*
Run the following command from WLST to remove Oracle Content Server connection:
deleteConnection (appName = 'CPS_Application_Name', name = 'CSConnection')
*
Run the following command from WLST to restore an existing Oracle Content Server connection:
setJCRContentServerConnection ('CPS_Application_Name', 'CSConnection', socketType = 'socket', 'New_Content_Server_Host' = serverHost, serverPort = 'New_Content_Server_Port')
*
Run the following command from WLST to list existing Oracle Content Server connections:
listJCRContentServerConnections (appName = 'CPS_Application_Name')
See if you've too missed to follow the above mentioned steps and if so then fill to see if the problem still persists.
Hope this helps
Thank you
Srinath -
Quick Installation Guide for oracle 10g 2. rel on redhat linux 9
I'm installting oracle 10g on linux redhat for the first time, looking for a quick help pre and post steps for installation guide. I would highly appreciate if someone has something in that regard?For the supported versions installation guides are in the document library, choose the installation guide for your architecture (x 86, x 86-64, Itanium):
http://www.Oracle.com/pls/db102/portal.portal_db?selected=11
Werner
-
Installation guide for Oracle 10 g on Linux
Hi all
Can anyone provide me please with steps or some in 10g Linux installation guide.
Thank you
AnchorageI'm really surprised, given a lot of answers, but none of them point you the Oracle documentation, however, it is purely a matter of doc. If you follow the doc below, it should be perfectly correct:
[Database Release Notes 10 g Release 2 (10.2) for Linux x 86 | http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15659/toc.htm]
[Database Installation Guide 10 g Release 2 (10.2) for Linux x 86 | http://download.oracle.com/docs/cd/B19306_01/install.102/b15660/toc.htm]Nicolas.
-
Can someone point the installation guide for gc
I'm new to gc can someone point the 11g installation guideHere is the link http://www.oracle.com/technetwork/oem/grid-control/documentation/oem-091904.html
-
Need installation guide for Windows XP Home on Satellite L300
I think it would be fair to say that a LOT of users here would be as a simple guide step by step on how to install XP and drivers on the Satellite L300 series. I had a lot of trouble with that and I do in my profession. I decided to go on Google to see if it was just me or there are others in the same situation. I (finally) installed XP on a Satellite L300-12I, so IT IS possible, after more than all of the obstacles ahead.
I think it would be an idea to write an article for this and simply link users to the article, rather than everyone that recur again and again.
This is not to cause friction or what not, just, I think it would be useful on both sides if that were to happen.
Thanks for reading,
Good luck.I have the L300D - 12I model PSLC8E and I would install xp on D; partition and use dual-boot.
Is your same model if so is it possible you could point me to all the necessary drivers?Thank you
Dave
-
Installation Guide for the Patch CSCur04820 (Bash vulnerability)
Dear community,
is there a documentation for the installation of the hotfix CSCur04820 on first Collaboration insurance 10.5.1? In the sections of software downloads, there is no supplied readme file.
Your answers are greatly appreciated.
Best regards
Igor
Procedure to upgrade Bash Shell rpm 1) SSH to PCA Server and goto /tmp directory (ssh -p 26 root@
) 2) Download the attached bash-3.2-33.el5_11.4.x86_64.rpm file to /tmp directory in Prime Collaboration Assurance(PCA) server. 3) Run "rpm -Uvh bash-3.2-33.el5_11.4.x86_64.rpm" to upgrade the Bash shell 4) Goto /opt/emms/emsam directory (cd /opt/emms/emsam) 5) Run "bin/cpcmcontrol.sh stop" to stop Prime Collaboration Processes. 6) Run "reboot" command to reboot the VM. 7) Once VM is rebooted and all the Processes are UP, you can continue to use the Server. You can run this command before and after to make sure it's installed:
rpm -qa | grep bash
-
Installation Guide for the suite oracle e-business
Dear all,
I would like to know where I can find a guideline for installing Oracle e-business suite on architecture multi-noeuds and recommended. I have two linux servers, where space has been allocated on / partition however I do not have a SAN and I want to know if the installation can be done without a San. A server will be the database server and the other server of an application.
Thank you for your response which will be very useful
Dilbert137Salvation;
I would like to know where I can find a guideline for installing Oracle e-business suite on architecture multi-noeuds and recommended. I have two linux servers, where space has been allocated on / partition however I do not have a SAN and I want to know if the installation can be done without a San. A server will be the database server and the other server of an application.
First of all, what will be your EBS version, a version of Linux (Rhel also or OEL)?
For EBS related NOTE please check the links below:
For r12.1.1:
http://download.Oracle.com/docs/CD/B53825_01/current/HTML/docset.htmlFor r12:
http://download.Oracle.com/docs/CD/B40089_10/current/HTML/docset.htmlFor r11:
http://download.Oracle.com/docs/CD/A60725_05/r11_doc.htmPreRequest installation, steps, screen related dosc, etc. you can check out my blog:
http://heliosguneserol.WordPress.com/category/step-by-step-Oracle-e-Business-Suite-installation/
"" If you have any problems or for your other question related to BSE, please open thread on Forum Home "E-Business Suite ' Discussion General EBS
Respect of
HELIOS -
Try to find an installation guide for Hyperion SQR 8.5
Have tried without success to find a manual for an older version of Hyperion SQR (8.5) - it doesn't seem to be all about OTN or Metalink.
Anyone has any advice on where I could find a copy, please?Reach
http://eDelivery.Oracle.com/
Select
Hyperion Performance Management
Then select
Performance management Hyperion and BI (pre Version 9.x) Media Pack for Microsoft Windows (32-bit)
Be aware that are supported for the 8.5 version ends in September.
-
autonomous flexunit generator installation guide for Flash
Hello world
I'm working on flash builder 4 standalone (not premium), I put the flexunit swc bookstores and try to run FlexUnit Tests, but it says
upgrade to the assessment that they are a solution to this.or, we get the premium.
Thank you
First of all, follow this:
http://docs.FlexUnit.org/index.php?title=Setting_up_a_FlexUnit_4_Project
However, you are never going to be able to click on one of the buttons "Execute the Tests of FlexUnit" in Flash Builder. Those who have nothing to do with FlexUnit... they invoke the feature which, as you noted, is only available within the Premium edition.
However, if you follow the instructions on the page above, you will be able to run these tests, it will just be in a separate window. So, you will never be able to run them in the FlexUnit results window, etc... It is a feature of the premium offered by Adobe and does not part of this project, but you can run them.
Mike
-
Red Hat Enterprise Linux Configuration Guide for Dell storage bays Series PS
This configuration guide provides information on the integration of the RHEL 6 and 7 operating environments with the PS Series Dell storage arrays using iSCSI technology. The guide includes tips for working with volumes, using MPIO and some performance tips.
The PDF file is available here:
Kind regards
Don
Hello
With Linux, as any OS, iSCSI is not different from the SAS/SATA or Fibre Channel. No matter how you are connected to a "disk", it looks like a SCSI to the OS disk.
So yes, you use the mount points. That's how Linux as most UNIX operating systems do it. But use any method supported for other iSCSI disks. In Windows, you can use drive letters or mount points.
Kind regards
Don
-
FMW: Portal Upgrade Advisor - confusing info on JDK in WLS Installation Guide
Post this thread on behalf of Charlie - technical contact at one of the customers drivers Middleware sites:
Concerning
Dan Mortimer
Oracle - main Technical Support Engineer
(Expert in the field of life cycle)
Charlie sent me the following e-mail:
NOTES about the Upgrade Advisor in
Oracle® Fusion Middleware Installation Guide for Oracle WebLogic Server 11 g Release 1 (10.3.4) Part Number E14142-05
Looks like there may be a confused statement in Chapter 2 on «jdk previosly» installed
"A JRE is packaged in the 32-bit Windows and x 86 Linux installation programs"
Chapter 2:
Before you start the installation program
Before starting Setup, verify the following information:
If you install the software in graphics mode on a UNIX or Linux machine, you must set the DISPLAY environment variable before you run the installation program.
If you use an installer of the synchro .bin file, replace JAVA_HOME with the installation of the JDK supported location you have installed for your platform.
...
[Then goes on to say]
Functions of the base directory
The directories in the home directory of Middleware vary according to the installation program you use and the products that you have selected for installation.
For example, WebLogic Server Setup creates the directories and files listed in the table below if you have selected all the components for installation.
Table 2-4 Directory Description for Middleware House
Directory or file Description
JDKVersion
This directory contains the software for the JDK from Sun, if it is installed with your software. The JDK provides the environment to run Java (JRE) and tools for compiling and debugging Java applications.
Good suggestion. Thank you.
-
PeopleSoft FSCM 8.8 installation guide.
Hello
Can someone please help me find the installation guide for PeopleSoft FSCM 8.8. I'm new to Peoplesoft and I try to install FSCM 8.8 for training purposes. Apparently, this is a very old version and I can not find anywhere installation guide. Thank you in advance.
Hello
Please review the below items of knowledge of MOS (support.oracle.com)...
PeopleSoft 8.8 Supply Chain Planning (FSCM) Guide of Installation and upgrade (Doc ID 700934.1)
Enterprise PeopleTools 8.49 installation guides (Doc ID 703595.1)
Enterprise PeopleTools 8.50 (Doc ID 887277.1) installation guides
In addition to this, I would suggest a few points here - as you mentioned that you're new to PeopleSoft.
1. to install the full installation program (PeopleSoft FSCM 8.8 the installation program, you must do the compatible PeopleTools.
2. based on the version of PeopleTools, you plan to go with, you need to get certified versions: database, Web server, Tuxedo. And also your operating system should also be an operating system that is certified for your version of PeopleTools.
(NOTE: you can check the MOS Certification tab for all combinations certified).
3. follow the below facilities one after the other.
. i. install the database
. II. install Tuxedo
. III. install the Web server
. IV. install PeopleTools
. v. install PeopleSoft FSCM 8.8
4. go to the Configuration Wizard of databases (DBCA) in the Windows START menu and set up the database (just follow the steps that appear in the DBCA. And provide the necessary details as GUID, etc.)
5 run the wizard of Network Configuration (Net CA) in the menu Windows START and configure the CA Net.
6. search for your OperatingSystem records these SQL Scripts...
. i. UTLSPACE.sql--> you need to change the database path to report your exact database in this script and then run the script to the SQL prompt.
. II. DBOWNER.sql--> change the details of database administrator (exactly what you mentioned in step 4 above) in this script and run the script at the SQL prompt.
. III. EPDDL.sql--> you need to change the database path to report your exact database in this script, and then run the script at the SQL prompt.
. IV. PSROLES.sql--> no change required, you can run this script directly at the SQL prompt.
. v. PSADMIN.sql--> edit the Admin details according to your requirement and run the Script at the command prompt. (ongoing, you will need to provide the following three values when he is invited allows you to enter values...) SYSADM, SYSADM and PSDEFAULT.
. VI. CONNECT.sql--> no change required, you can run this script directly at the SQL prompt.
7. in the menu Configuration Manager START (menu group of PeopleSoft), provide details
Type of database:
Name of the database:
ID of the operator: ps
Connect id: people
connect password: peop1e and save it.
Save it
8. I have. In menu START-> menu group PeopleSoft-> Mover. Provide these values when it prompts for credentials: SYSADM / SYSADM.
. II. in the Data Mover, menu file-> Database Setup-> give your details required and when you reach the last screen, run the Data Mover Script (by clicking on the icon of traffic lights on the top of the screen of Data Mover). It will work for about 3-4 hours.
. III. once the script has completed, you must check the logs for errors, if any.
The log files are...
. epengl.log
. epengs.log
. Encrypt.log
. Triggers.log
. views.log
NOTE: at the end of each log file, there must be a confirmation saying... ".... Completed successfully"- without it, you are not supposed to move forward. If the errors encountered, allow to fix these errors and re run the script from there, through Data Mover utility.
9. connect you to AppDesigner using credentials VP1/VP1 and the import of sub projects and build one after the other.
ppltls84cur
ppltls84curdel
ppltls84tblspc
10. run all AppEngines mentioned in the installation guide for PeopleTools at the command prompt.
11 connection to the SQRW (as SYSADM/SYSADM) tool (with all the indicators mentioned in the installation guide for PeopleTools) and run run the SQR program that is mentioned in the installation at this point guide.
12 do run the Grant.sql Mover utility, if you face problems with access.
13 ApplicationServer, Web server and ProcessScheduler server configuration.
14. now you can connect to the installation of Peoplesoft in multichannel mode (that is, through browser) with the following url:
http://localhost:80/PS/signon.html
where ps is your site of PeopleSoft name mentioned in Web deployment server configuration.
I hope this helps.
Best regards
Aarkay.
Maybe you are looking for
-
Satellite T110-13R wireless card won't be connected
Hello After manually installing windows 7 32 bit on my satellite T110-13R after formatting drive C:, my wireless card does not want to connect, and fn + f8 does not work. The wireless card appears in the device management, but does not connect and no
-
Pavilion p6 - 2220t Desktop can't see Gygabyte GV - N210D3 - 1GI graphics card
I added a graphics card from Gigabyte GE Force 210 GV-N210D3 - 1GI to my desktop HP Pavilion W7 p6 - 2220t. Reason: p6 - 2220t came with DVI (without Audio), and I need full HDMI. The card went to the fine and certainly relies on the motherboard. Bu
-
When you step through the startup process of the printer, I chose the wrong time (an hour out there). Without doubt, it is used in faxes etc. of timestamp. How can I change this? I tried the settings on the LCD screen and it has not found here? I als
-
BSOD help (ntoskrnl.exe)
I recently built a new computer for the first time and I am constantly a BSOD. After consulting the minidump via the blue screen view files, it refers to the ntoskrnl.exe as the cause, but I suspect that maybe it's a corrupt driver (I could be wrong
-
Missing icon for blackBerry Smartphones
Hello The blackberry app world icon disappeared from my home screen, I tried to download app world once again, but no icon appeared, someone at - it solutions?