Installation HP 2600n printer for Vista laptop

Similar Questions

• My computer installs the automatic updates for Vista Home Premium, but fails to set them up.

  original title: Microsoft updates

  My computer installs the automatic updates for Vista Home Premium, but fails to set them up. I'll through in circles, trying to figure out what the problem is. Everything was fine until a week ago. Help please

  Thanks for trying to help. It was too complicated for me to fix, so to get help in. happy to say now, all right.

• Cannot print from Vista laptop after going DSL ATT Uverse. __

  Have a XP PC with a Canon Pixma 310 connected via USB.  Before Uverse, I was able to print from my Vista laptop that is used wireless.  I checked to make sure that the printer is shared on all parameters. When I try to print from laptop, I get a window indicating the printer is not enabled.   I spoke with Cannon and Uverse mean that it is a Vista setting.  not need to change anything, other than the DSL, uverse.

  You use a different wireless router now that yopu use Uverse?  Is the printer connected to a PC in your local network, or is it wireless itself?  Open your printers folder and right click on the print queue.  Click on properties.  Select the Ports tab.  Scroll down to the port that you use for the queue.  What is an IP address?  If so, is this the right place?  If you have changed wireless routers, the local address may be different from what it was with the old router. Brian Tillman [MVP-Outlook]

• Installation of MS! for Vista

  I tried several times to install the SP1 for vista on my laptop.  When the download is through the message says that it has been installed successfully.  However, when updates are coming back to the top of SP1 is still there and it says that I'm running vista Home premium without SP1 being shown in the edition of windows when I right click on computer and select Properties.  Can someone please tell me what the Devil's going on and how I can solve this problem.  I downloaded and installed all the other updates including recommended, and optional.  I want to upgrade to windows 7, but I can't until SP1 is installed.

  I tried several times to install the SP1 for vista on my laptop.  When the download is through the message says that it has been installed successfully.  However, when updates are coming back to the top of SP1 is still there and it says that I'm running vista Home premium without SP1 being shown in the edition of windows when I right click on computer and select Properties.  Can someone please tell me what the Devil's going on and how I can solve this problem.  I downloaded and installed all the other updates including recommended, and optional.  I want to upgrade to windows 7, but I can't until SP1 is installed.

  ==========================================
  I was wondering if you have tried the full download of the
  file on your desktop and install then from there?

  Once you have the file on your desktop, it can be a useful
  try to unplug the net and turn off your anti-virus
  before installing.

  The following link can offer something useful:

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1
  (expand the section: "manually install SP1 using the ')

  Microsoft Download Center")

• Printing for Vista Home Premium 32-bit network: Blank document or disappears from the queue

  I'm having trouble printing large format HP DeskJet 1000 c, which is connected via a parallel cable to my Media Center/DVR PC running Windows Vista Home Premium 32 - bit SP2 on my printer. I connected with the success of this printer to two different computers, a desktop PC running Windows Vista Home Premium 64 - bit SP2 and a laptop Mac OS x 10.5.8. I can print from the local computer very well, but when I try and use the printer on the network, one of two things happens depending on what machine I try and print from:

  1. from Vista 64 Desktop: printing the task appears, treats and disappears from the queue to the local printing on PC DVR. Printer advance a sheet of paper as if he were about to print, then waits with a power indicator light flashes. If you send a new job network, the tip sheet of paper is ejected and the process begins again. If you send a new job locally, the tip sheet of paper is ejected and the local job will print normally.

  2. from Mac OS x: printing the task appears, treats and disappears from the queue to the local printing on PC DVR. Printer does nothing.

  Although the process of networking of printers with OS X 10.5 and Vista is a bit more complicated (annoying) it was with XP, I am able to print from the Mac to a printer on the Vista 64 machine very well. Similarly, PC DVR allows you to print to the printer of the Vista 64 computer and a printer connected to my Mac desktop.

  I checked the HP site for drivers and since it is a quite old printer, there is no listed for any operating system newer than Windows 2000 (which a pilot has been included with the operating system). Any ideas as to why the PC DVR will not take of the network print jobs? Unfortunately, this complex printer (3 printers, 4 machines) installation is somewhat needed due to the possibilities of each printer and how my home office is laid out. If they did a multifunction, printer laser color large network format, I could sell my soul for what it... But I'm not aware of such a machine available to mortals.

  There is a difficulty that recently came on the HP Forums for 64-bit Vista:

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-and/DeskJet-710-720-810-820-100-series-printers-patch-for-64-bit/m-p/203377#U203377

  All you have to is to download the mentioned file and replace some dll with those provided.

  The question remains with OS X, but I do not expect that Microsoft will provide no support for this.

• I need to get an installation CD of XP for my laptop I ordered from Dell because need to format my drive and I loose XP.

  I have a Dell Inspiron 6000 with Windows XP Professional I ordered from dell (it was about 5 years ago). I want to be able to partition my drive hard so that I can dual boot XP and ubuntu, but I had not given an XP CD to reinstall after formatting the disk for the partition. How can I prove to microsoft that I have a valid XP version so that they will send me a cd so that I can install on my laptop? Any suggestions?

  It is the same, as I just posted... I need to know if such image files or installation files

  Hello makman99,

  You should ask this question at Dell. Good advice on all XP themes, visit the http://www.annoyances.org/exec/forum/winxp

• How do I pair the mobile phone LG rumor 2 for Vista laptop, or how to manually enter the pairing code

  Hello.

  When I try to pair my phone to my laptop, it appears in the add menu.  When I click on it, a window will appear that has a code on it and told me to check the code on the device is the same.  No code appears on my phone.

  How can I manually enter the code?  In my opinion, I know, but no option appears to allow me to enter.

  I tried all the step using the dialog boxes.

  Thank you!

  Hello

  Please use the Windows Vista answers Forum.

  The Bluetooth device you want to pair must be in mode so that it shows the pairing pairing code.

  Consult the owner's manual for the device you want to use to find detailed instructions on how to place the unit in pairing mode.

  1. with the handset closed, press the button on the keyboard to access the main menu. Once inside the menu screen, select the menu "Tools".

  2 on the Tools menu, select the Bluetooth menu and press OK on the possibility of "pair with hands-free."

  3. the handset will start searching for the Bluetooth device. Once found, it will fill in the list of devices. Press OK on the keypad to associate the device.

  4. once the device PIN / access code has been entered (as applicable), the pairing process will be completed. Leave the menu screens and you will be able to start using your Bluetooth device.

  NOTE: A command prompt can display request a PIN of 4-16 (usually 0 0 0 0). If this prompt is displayed, see the owner's manual for the device for use with the handset to determine the AXIS / Pass code

  You can check the link below:

  http://lgknowledgebase.com/kb/index.php?view=entry&EntryID=6264

  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Kind regards
  Technical support of Microsoft-yama.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The computer hangs at "Shutting Down... "only after the installation of the updates for Vista Ultimate x 64 Windows

  Hello.  Recently, I have reinstalled the 64 bit version of Windows Vista Ultimate on my computer.  I allow all automatic updates (worth about 450MO) and let it do its thing.  Afterwards, I had to reboot my computer.  He was going smooth until he hit the "Configuring updates... "or something like that.  The circle stopped going around smooth and pauses every second or two.  After about 30 minutes, he went to "Shutting down...". "and I let this go all night.  After 4 p.m., he was still at "Shutting down...". "therefore I kept the button and made a closed hard.  After that I started it up, it would get to the loading screen with the green bars that go everywhere.  It also was not smooth and stopping every second or two.

  After about 10 minutes of this, I restarted my computer again, and it still wouldn't work.  I tried to start in safe mode, but it would also stop during the loading of some drivers and not continue.  So I reinstalled Vista again and, of course, was able to get without updates.  I thought it may have been a one time thing, so I did the windows updates again.  This problem repeated itself.  So I reinstalled Vista and am refraining from doing the updates of windows.

  I restarted my computer without updates, and it goes well.  It is only after updates where it fails to turn it off and save.  No one knows what is the problem and if there is a solution to this?

  Hi JerryR9190

  Thanks for posting on the Microsoft Answers site

  Are you Vista to get Service Pack 1 automatically as well?
  If so, please try to download/install it yourself and see if that has any effect.
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=874A414B-32B2-41CC-BD8B-D71EDA5EC07C&displaylang=en

  Please try and post back if you have more question

  Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installation of Windows 7 for their laptop computer Inspiron

  Hello... Someone at - it with Windows 8 / 8.1 laptop been able to install Windows 7? If so, would you care to share how? Thank you

  I'm tired now. I have try this installation of all possible ways and it can not be installed. I even went to try and see if my disc of windows 7 is originally by installing windows on my desktop pc, no problems with the slice. If the drive is good. Any ways I give up and I am returning this unit in MS and get a full refund. Now, I need to figure out how to do a factory reset. Thank you

• Add old printer for computer laptop w/Win 7

  New laptop with Windows 7 (64-bit) and old printer Epson TM-T88iii.  Downloaded driver but still unable to find and add the printer in 'Add printer' and Windows update says it does not work.  Then he keeps asking the CD/drive, which we don't have.  Don't know what other way to 'find' pilot already on the hard drive.  Any thoughts?

  New laptop with Windows 7 (64-bit) and old printer Epson TM-T88iii.  Downloaded driver but still unable to find and add the printer in 'Add printer' and Windows update says it does not work.  Then he keeps asking the CD/drive, which we don't have.  Don't know what other way to 'find' pilot already on the hard drive.  Any thoughts?

  Unfortunately - you have to get with Epson.  Their material, their driver (even if it's supposed to be included with Windows 7)... their support.

• It says service pack 1 for vista is installed, but when I re-boot, sometimes also not installed in my updates

  service pack 1 for vista is not install on my laptop.  It downloads it, acts as if it is install and even says it is installed but when I go to my updates, it shows it as not installed.  I went through the motions on many occasions and I need an answer to why, please

  Hello

  It is the Forum of operating system setup Vista that you're in.

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  And there is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  Or you can repost you this link in the Windows Update Forum.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  See you soon.

• 2600n: printing on Windows 10 always prints to the file rather than to my 2600n

  I bought a new laptop which had 10 (64-bit) Windows installed already.

  When I connect my 2600n printer to the laptop via the USB port and attempt to print anything, the print function recognizes the 2600n is available, but the software behaves as if I chose the option to "Print to file" instead of send data to my printer.

  On the Microsoft Web site, I tried a Windows 10 compatible driver for the 2600n.  I had to download the Microsoft Update catalog that I searched.  The catalogue lists the 2600n, but it does not list Windows 10 like it in support.  The latest version of windows that supports 2600n is Windows 8.1.

  HP has a driver for the 2600n that works on Windows 10 (64 bit)? ... or where can I find?

  I noticed that my 2600n is not the default printer.  Even though I chose the 2600n for the print operation, Windows 10 boiled corn have a bug in the driver and it always sends to the default value.  The default is to print to a pdf file.

  3 times in 3 different ways, I tried to change the default printer to the 2600n and my attempts have been ignored.
  The 3rd time, it looked like it changed the default printer of what I wanted, but when I went to use,.
  It's the same old problem.  Then I left the print operation and came out from the browser where
  I tried printing and did something else.

  I used the NotePad editor later, when I thought I would try to print something new and this time it worked.

  Apparently change the default printer has not taken effect properly and I had to get out of the service where I was doing printing before it would work.

  So the solution is to change the 2600n to be the default printer... and wait a little and do something else.
  out of everything you did before you try again.

• SP1 for Vista

  I recently had to restore my pc to factory default and now used to install service pack 1 for vista. It keeps cycling he finished and then watch again he must run the sp1. I can't switch to win7 if sp1 for vista will not install correctly. What can I do to remedy so the (sp1) update installs correctly?

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will tell you also here which SP, if any, you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• No Windows Update for Vista

  I tried everything I know and I can't get Windows Update for Vista.  I tried Fixit, F8 during restart, but without success.

  Hello

  You don't tell us if you get the error codes or not.

  You need SP2 must be installed to support still available for Vista.

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• SP1 for Vista is installed but doesn't show is not in the computer properties

  Reinstalled Vista professional to replace the update to Windows 8 Pro incompatibility with my hardware. Update SP1 installed successfully several times, but always not shown in 'The computer properties' SP1! By thus impossible to reinstall Norton Security because there are installed SP1.

  From Internet Explorer

  Original title: SP1 for Vista Business

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  He will tell you he which SP you have installed. so, it is not installed.

  Choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.