Cannot print from Vista laptop after going DSL ATT Uverse. __

Have a XP PC with a Canon Pixma 310 connected via USB.  Before Uverse, I was able to print from my Vista laptop that is used wireless.  I checked to make sure that the printer is shared on all parameters. When I try to print from laptop, I get a window indicating the printer is not enabled.   I spoke with Cannon and Uverse mean that it is a Vista setting.  not need to change anything, other than the DSL, uverse.

You use a different wireless router now that yopu use Uverse?  Is the printer connected to a PC in your local network, or is it wireless itself?  Open your printers folder and right click on the print queue.  Click on properties.  Select the Ports tab.  Scroll down to the port that you use for the queue.  What is an IP address?  If so, is this the right place?  If you have changed wireless routers, the local address may be different from what it was with the old router. Brian Tillman [MVP-Outlook]

Tags: Windows

Similar Questions

  • Cannot print from IE 8 after upgrading Vista to Windows 7

    My laptop (HP Elitebook 8530w) uses two HP printers: Color LaserJet CP3525x (at work) and Deskjet 6940 (at home). Both printers are accessible via a local network.

    I've recently upgraded to Vista Enterprise to Windows 7 Enterprise.

    All still print fine (from Word, Adobe Reader, Windows Photo Viewer, etc.), except for IE 8! When I try to print a web page in IE, it only prints the page header, and in the contrary case, the journal will be empty. This problem occurs on both printers. (And of course this good worked before the upgrade.)

    Any ideas? Thanks for any help.

    Jeff

    (same poster)

    If anyone else has this problem, I found the solution on another forum (http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/920588e5-ccc4-4e24-83d6-606d5e3b1c70).
  • Cannot print from Quicken 2010 after the recent update of Windows.

    Original title: PRINTER will NOT WORK AGTER WINDOWS UPDATE.

    WHEN I UPDATED FROM WINDOWS TO THE LAST UPDATE.  MY QUICKEN 2010 WON'T PTINT DOCUMENTS TO MY HP J4680 PRINTER.

    TO RESOLVE THIS ISSUE, RESTORE A PREVIOUS UPDATE

    Hello

    Please contact Microsoft Community. I will surely help you this question.

    To better understand the issue, I would need more information on your side.

    1. the problem occurs only while printing Quicken 2010?

    2. What is the Knowledge Base Article number of the update of Windows that has been installed recently?

    This problem could occur due to incorrect printer settings or driver corrupt.

    Method 1:
    I suggest you to remove and reinstall the printer. Check if it helps.

    a. in the charms bar, select settings.

    b. Select change PC settings.

    c. Select devices.

    d. Select the printerand select the icon to remove the printer.

    f. Select Add a device to reinstall the printer.

    Method 2:
    If the problem persists, I suggest you to download and install the latest printer driver on the manufacturer's Web site. Check if it helps.

    http://support.HP.com/us-en/product/HP-OfficeJet-J4000-all-in-one-printer-series/3645081/model/3692887/drivers

    See the article for more information.

    Printer in Windows problems
    http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Note: applies to Windows 8.

    Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

  • Cannot print from my laptop to network HP CP1515n printer

    Hello

    in our office, we have an HP CP1515n printer on the network set to a static ip address. Everyone but me can print on it, so I guess that the printer is properly configured. Even I was able to print on it until a few weeks before. I have not remmember change anything specifically.

    I tried to reinstall the drivers and everything looks allright:

    I tried to run HP print and Scan doctor and he says any abstract very well:

    But when I try to print the test page, it does not print. I noticed that printing window says the printer is out of paper, but it is not and I do not understand this message on other computers:

    Any help would be really appreciated!

    Best regards, Luka

    I found the answer almost as soon as I posted this is a vpn client software and the virtual network adapter that made me the same IP range as the my LAN. When I turned off and did an ipconfig/release / renew the printer started to print.

    Best regards, Luka

  • After installing new ink cartridge cannot print from ipad hp 5510 series

    Unable to print from the iPad after installing new ink cartridge in a printer hp 5510.

    I can print from the laptop based on windows.

    the two settled on a wireless router.

    Help!

    (I reinstalled the software, reset the wireless, reset the computer, the hp 5519 is listed as the default printer.)

    Thanks for your reply. I did all these things and more... Finally observed that the IP address of the printer was 2 'off' the IP address of the iPad numbers.

    I've corrected the printer IP addy... and viola.

    IPad and laptop computer are once more compatible with the printer.

    Appreciate your message...

    Louise

  • Cannot print the Vista Home Premium laptop on printer Epson Workforce 610 wireless

    Tried to implement printing wireless since our Toshiba laptop under Vista Home Premium to an Epson Workforce 610 printer.

    I have already implemented printing wireless this printer to my desktop under XP Home SP3 without problem and continue to be able to print from there.

    I went round and round with Epson.  They helped me get the printer configured on the laptop, but because the printer is working from the office, they say that it is no longer their problem.

    Here's what I know:
    -Wireless running on a Belkin Wireless G router, model #F5D7230-4, v.6xxx, with the firmware update.
    -L' laptop and printer are both connected to the same secure wireless network.  IP addresses all look OK, and I can see all devices when I look at the settings of the router.
    -I am running Trend Micro Internet Security 2009, but I turned it off.
    -Windows Firewall is also disabled.
    -I can print via the wireless router if the laptop is connected directly to the router.
    -No, I can't print from the laptop to the printer if the laptop is connected to the wireless network.

    I think there are some settings or configuration of Vista which is at the origin of the problem.  I looked the likely candidates in the properties of the printer and in the center of network & share, but I don't know enough about Windows or Vista to really know what to do.  Anyone has any ideas on this?

    Hello

    My suggestion would be to update the firmware on the router and wireless adapter first.

    Go through the following article. It can help you
    http://support.Microsoft.com/kb/314073

  • I can't print from my laptop to our shared printersince my husband got a service uninstall Vista and install Windows 7

    I can't print from my laptop which has Windows 7.  It is a residential group which was able to use the same printer, until my husband uses an online service that changed Vista to Windows 7, about two weeks ago.  Please help me - I need to print.  Thank you

    Determine the version of Windows 7 you need (32 or 64-bit) computer right click go to properties, then go to the printer manufacturer's website and download the driver windows 7 if they are available.

  • HP Officejet 5740: after that 10 updated iOS, cannot print from the iPad

    Hello

    I've updated my iPad to iOS 10.1.1 2 Air.  I can't print remotely.  It runs from my other devices (phone, Macbook Air) Apple which have not been updated to iOS 10.  I use AiO Remote.  The iPad recognizes the printer and the IP address is correct.  I was able to print from my iPad yesterday until I updated.

    I appreciate your help.

    Hi @AllanAAB,

    Welcome to the HP Forums!

    I came across your post where you are unable to print from the iPad after iOS update. I would like to help.

    Please refer to this article http://hp.care/2bSjSnW , he explains how to use AirPrint and also troubleshooting steps to solve the problems with it.

    Recommend that you remove the printer from the iPad, and then reconnect the printer on the iPad. (Display settings and select Wi - Fi, if the printer is listed, click on the i on the right side of the printer that there are listed and select forget this network/printer.) And reconnect the printer)

    Restart the router, printer, and iPad. I'm sure you could have already tried this.

    Also, look for the printer firmware updates (if applicable, on www.hp.com/drivers) and also check if there are other updates released by Apple via iTunes.

    Remove the HP all-in - One Printer remote app on the iPad and reinstall it.

    Let me know if this helped.

  • My HP Officejet Pro 8600 cannot print from my MacBook Air

    Hello

    My HP Officejet Pro 8600 cannot print from my MacBook Air. It keeps on showing "the printer is not connected", but the display on the printer connected. I often reset the printer "EVERY TIME" I want to use. I also tried to turn off my laptop and printer several times before printing. If I'm lucky, it will work maybe for one or two prints. If no luck then I have to reset everything again. Sometimes I reset the printer, the printer is not displayed on my selection.

    Hello boojoo1tw,

    Welcome to the HP Forums!

    I understand that you are unable to print most of the time with your Officejet 8600. How is the printer connected? USB or wireless? What is your operating system on your Mac computer? Click here to find out.

    If your wireless printer, then I recommend the award of an 'IP address' by following this HP document on printer does not maintain the wireless connection.

    Please post your results, I'll be looking forward to hear from you.

  • Cannot print from iPhone or iPad with AirPrint.

    I have a printer Photosmart wireless 5510 B111a. I've always been able to print directly from my iPad 2 and iPhone 6 until recently when I changed my internet phone carrier and fixed networks of ATT to Sonic. Now, I am still able to print from my laptop, MacBook Pro, but not from my iPad and that on the occasion of my iPhone. I get the message "no printer found AirPrint. I did ALL the procedures recommended to solve this problem: turn off all devices, restart the new router, reconnect to the network, unplug the printer, call Apple, etc. This sounds like a problem printer or router. I tried the wireless printer printing a friend who has the same router and I had no problem with a mobile device. My router is defective or a default configuration which excludes Hello AirPrint? I downloaded the application of discovery to see if he could locate my printer but it just scans and research of local domain analysis without results. What can we do? I'm so frustrated!

    Hi forestknowles,

    I have the same problem with AirPrint as well. After having tried and tried a lot of different things, my conclusion is something arrested Hello works correctly in the iOS.

    Whenever I have,

    (1) power cycle the printer, or

    (2) Hello re - activate in the configuration of the printer, or

    (3) connect to the Wifi Direct printer

    Hello leave the iDevice to discover the printer immediately.

    When Hello has stopped working properly in the iOS, it causes similar problems-
    (1) AirPrint printer not found
    (2) printing of late, taking 5 minutes to print a page using AirPrint / ePrint on iOS.

  • OfficeJet 6000 computer connected to windows 7. Unable to print from the laptop Windows XP

    Printer connected by USB to the Windows 7 desktop.  Printing is fine.  I have two computers on the same network of working group, file sharing is allowed.  My laptop detects the printer on the network, but there is apparently a driver problem.  The disc supplied with the printer will only install on XP and Vista, so downloaded the drivers for the new office of windows 7.  I either get a message "Failed to print" or "the handle is invalid."  When I tried to connect to the printer via the network of sharing and tried to open it, I was told that the wrong drivers were located on the server.  He had the air of a file with *. INF.  Do I have the wrong drivers on the desktop or do I need to install the drivers on the laptop?  I never had this problem with my old Vista desktop.

    Hello.  Finally, I was able to install additional drivers for XP on the server computer and can now print from the laptop.  Thanks for the help!

  • I get an error message when I want to print from my laptop on my Lexmart printer wireless. It is said "problems connecting to the printer.

    original title: devmgmt msc

    I get an error message when I want to print from my laptop on my Lexmart printer wireless. It says "connection to the printer problems" sometimes he just complained and then prints, sometimes it won't print at all. I hate the thing!

    Hello

    I suggest you to see link below and check if it helps.

    http://www.Lexmark.fr/publications/pdfs/810/winug/Eng/UGnetwk.html

    I suggest also you see the steps from the article below and check if it helps.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  • HP photosmart 4480 don't print from my laptop

    I am not able to print from a laptop, but the other laptop prints very well. All I get is "error - printing" message. It has never printed on this computer. I use Windows Vista Home Premium Service Pack 2 on a Dell XPS.

    Hello elkaydub,

    Welcome to the Forums of HP Support! I see that you have not been able to print from your computer on Windows Vista on your HP Photosmart C4480, you get a "error - printing" message.

    I would like that run you HP print and scan doctor- it was designed by HP to offer users the features and troubleshooting problem needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

    If you run the PSDR and still can not print, please continue here: print jobs are stuck in the print queue

    I'll watch for your reply.

    Thank you

  • Cannot print from FSX w/acceleration, no further questions. Running Windows 7 64 bit.

    I have FSX w/acceleration installed for a few years now on my HP G71 dual core laptop and it works great, that I had no problem at all. It was my first attempt to print from it however. I wanted to print a flight plan, click on the "print" button and nothing happened. I went to the Panel, open Printers and devices, and my printer was there, online and ready without papers pending. I went to properties and even printed a test page, so I know that the issue is not with the printer. For some reason any FSX does not send the document to the printer. How can I remedy, which should look and where? Thank you in advance for any light that can be shared.

    The duplicate thread information:

    Cannot print from FSX w/acceleration, no further questions. Running Windows 7 64 bit.

    I have FSX w/acceleration installed for a few years now on my HP G71 dual core laptop and it works great, that I had no problem at all. It was my first attempt to print from it however. I wanted to print a flight plan, click on the "print" button and nothing happened. I went to the Panel, open Printers and devices, and my printer was there, online and ready without papers pending. I went to properties and even printed a test page, so I know that the issue is not with the printer. For some reason any FSX does not send the document to the printer. How can I remedy, which should look and where? Thank you in advance for any light that can be shared.

    Hello

    The question you have posted is related to games for Microsoft Flight Simulator X and it would be better suited to the community of players for Windows.

    Please visit the links below to find a community that will provide the support you want for better assistance.

    Games for Windows:

    http://forums.Xbox.com/GFW/default.aspx

    http://forums.Xbox.com/GFW/games_discussion/pc_games_e-k/f/295.aspx

    Support of Microsoft Flight Simulator:

    http://www.Microsoft.com/products/games/FSInsider/tips/pages/default.aspx

    I hope that the information above helps you.

  • C6350 printing from a laptop, but not the other

    Hi, I have a new HP Photosmart C6350 which was working fine until today. I connected via the network from my wireless for two two laptops running vista 64. All of a sudden I can't print from a laptop computer but can print fine on the other. With one that does not initialize the print job, and then a minute later, it says "Unable to print Document" when I open the HP Solution Center, it says "work has not print because of an error in the printing system." The laptop is able to communicate with the printer, it can check the connection settings, get ink levels, scanner works very well, etc., but never print jobs is completed.

    I tried to turn on/off the printer several times, I rebooted my laptop several times and it has not solved the problem. I checked the edits, and he said that everything was up-to-date. I tried all the solutions suggested and don't know what else to do. As I said, it worked fine til today. Help, please

    Too bad, solved with the help of cat online hp

Maybe you are looking for