installation is stuck but no error message

Similar Questions

• Have an older iPad that I inherited. iOS is outdated but get error message when I try to update. Support instructions do not match my iPad. This was bought in 2011 I think.

  Have an older iPad that I inherited. iOS is outdated but get error message when I try to update. Support instructions do not match my iPad. This was bought in 2011 I think. I need help to remove the update one put it back.

  CBTEKRONY wrote:

  Have an older iPad that I inherited. iOS is outdated but get error message when I try to update. Support instructions do not match my iPad. This was bought in 2011 I think. I need help to remove the update one put it back.

  What is this error message that you receive? This would help a lot. From there, a person must be able to provide some additional troubleshooting steps.

• The controller throws an OAException, but the error message does not appear

  I made a controller to add validation business customized to a specific region of a page of Iprocurement. The controller throws an exception, but the error message does not appear on the page.

  Why when the exception is thrown, the system do not stop the processing of the page and displays the error message?

  I do not know the controller is reached because the page through JDeveloper debugging.

  -PageLayout

  -stackLayout

  -subTabLayout <-my controller is located in this region

  SerializableAttribute public class AccountsDistsValidationCO extends

  {oracle.apps.fnd.framework.webui.OAControllerImpl}

  ' Public Sub processFormRequest (pageContext OAPageContext, OAWebBean webBean)

  {

  super.processFormRequest (pageContext, webBean);

  throw new OAException ("something just happned");

  }

  }

  I should to use the following to solve my problem

  pageContext.putDialogMessage (message);

  pageContext.forwardImmediatelyToCurrentPage (null, true, null);

  Reference:

  OAException.ERROR is not throwing the error

• Mac OS 10.10.2 is installed and can open documents on my new Mac Air but an error message occurs, with, I try to attach a PDF file to emails.  Any thoughts?  Apple could not help.

  Mac OS 10.10.2 is installed and can open documents on my new Mac Air but an error message occurs when you try to attach a PDF file to emails.  Apple was not able to solve.  Any thoughts?

  It is not broken, just confused. The recipient must save the file and open it in Adobe Reader. Your e-mail application is not using Adobe Reader.

• The installation of driver gcntwk_w01_ENU_NB.exe error messages

  After you have uninstalled the photosmart HP on HP psc 2510 all-in-one drivers, I tried to reinstall the above mentioned pilot program.

  In doing so, I received the following error messages:

  "HP DeskJet printer has encountered a problem and needs to close.  We are sorry for the inconvenience. "no additional information given.

  I continued with the installation.  Following error message was, "Error Signature - szAppName:hpdj00.exe szAppVer:2.323.0.0 szModName:unknown - szModVer:0.0.0.0 - offset: 00000000.

  Then I received this notice: "file name is too long.  G:\Program Files\HP\Digital\Imaging\{A1062847-0846-427A-92A1-BB8251A91E91}-Y.

  My printer will print and copy correctly, but the function of Search is totally absent.  HP Director has not been downloaded.  I have not tried the Fax function. What should I do to correct this?

  No problem.

• While the installation of Service Pack 3 error message comes as "Bullxp is not a WIN 32 application.

  Original title: installation of Service Pack 3

  IAM using windows xp service pack 2 for Bull XP software. Now, I want service pack 3 to my Zune connection. I downloaded SP3 but that you can not install. Error message comes as Bullxp is not a WIN 32 application. So my question is. What is win32 application. ?  Will I get updated by the Download Center or else are up to so that I can go?

  Hello

  The error message "not a Win32 application invalid" is displayed on the Windows computers and can indicate a variety of problems. Win32 is part of the core of the Windows operating systems and programs installed on your computer must communicate with the kernel in order to work properly.

  Follow the steps in troubleshooting these KB articles and check if that helps:

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  You can also post your query to the Bullguard Forum and check:

  http://Forum.BullGuard.com/Forum/

• Installation of Iolo System Mechanic error message: cannot install because there is a conflic by Microsoft Security Essentials.

  Microsoft Security Essentials has been uninstalled and I can not find remnants of anywhere I can think of research. Something is always running in the background or otherwise to prevent this installation. I recently had other problems installation, update to install 4.5 etc.; but, despite this, I had to go into services and manually start the Microsoft Live just before you install something. I'm puzzled as to what part of the software MS Essentials is hiding somewhere. It works almost like a virus...

  Have you tried installs with a beginning of 'Clean' of XP using msconfig etc.

  Any help appreciated

  Hi acls9862083,

  1. What is the exact error message?

  We recommend you to uninstall Microsoft Security Essentials manually and check if you can install the other program successfully.
  See How to manually uninstall Microsoft Security Essentials

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Train Simulator of original disc installation - file already in use error messages.

  I try to install Train Simulator (Vista), I get an error message: files already in use, cannot be installed. I had it installed on my computer before, but I had to wipe my HD and do a complete restore on my computer.

  Hi Dave35,

  What is the full error message that you receive?

  Method 1:

  (a) copy the contents of the disc to install the game and save it to the desktop

  (b) try to install the game as an administrator do a right click on the installation program files and select run as administrator, click on continue if you are prompted to confirm.

  Method 2:  Select the boot and then try to install the game

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• Try to install FLAC Frontend in Windows 7 64 bit, but get error message

  Hello

  Tried to install FLAC Frontend but get this error message...

  The Module MSCOMCT2. OCX was loaded but the call to DllRagisterServer failed with the error 0x8002801c code.

  I looked online and saw tips for Vista that said to try to run Setup in administrator mode.  I tried and failed with error

  The module MSCOMCT2. OCX was not able to load. Make sure the binary is stored at the specified location or debug it to check for problems with the binary files or dependent.dll.  The module is not found.

  Seen elsewhere on run CMD in administrator mode and typing in what follows - regsvr32 \windows\system32\MSCOMCT2. OCX - hit enter, but I get the same error message as I do run the installer in administrator mode.

  I see some online have got it working using the method above, but it could be that I'm not because it is a 64-bit Windows 7 installation?

  The file can be found here

  http://members.home.nl/w.Speek/FLAC.htm

  This was taken from another forum to help. This solution is simple and works.

  > The only thing that has solved this problem for me installs the following:

  >>

  http://www.Ascentive.com/support/New/libraryfiles.exe

  >>

  > treadmill Syswow64, not the System32.

  WHEN THERE YOU ASK WHERE YOU WANT TO INSTALL THE FILES

  REPLACE "System32" with "SysWOW64".
  

  Install FLAC Frontend and it will load smoothly.

  Enjoy and enough bickering. Moderators, please be more useful than a verification of the compatibility lists and say ' well, if she's not here, then go the manufacturer! That is poor it helps and is to say "We will NOT help you."

• HP Envy 120 printer prints OK but the error message after each document

  After upgrading the firmware in my printer, I now get a window pop up with the title, "Unable to communicate with printer" at the end of each document.  The error message should be cleared before the next document in the queue will print.  Each document prints correctly despite the error message.

  Another thing that may cause this condition besides the update of the firmware is this: I have set up my printer for wireless printing, which worked OK.  However, I am currently using the printer with a wired USB connection.  Of course, the version non-reseau of the printer is selected as my printer 'default' regarding this error report.  The update of the firmware was held at the same time that change this "setup".

  Hey @rrbNevada,

  Welcome to the Forums of HP Support!
  
  I understand that your printer HP Envy 120 seems to have an error "Unable to communicate with the printer" after each print job is printed and this problem seems to have started after an update of the firmware running and change your connection type. Maybe it's a coincidence.

  For me to help you I need to know what operating system you print since?

  What is my OS?

  For now, I would like to run the print tool HP and doctor Scan. It is a practical tool that will 'fix print' questions automatically for you. It will scan the computer for any conflict of driver printer HP, connection problems and other issues that can cause problems with your printer. It will also try to fix these problems for you.

  HP Print and Scan Doctor

  If printing HP and doctor Scan fails to solve your problem, I recommend a complete uninstall and reinstall of your software and drivers for a clean slate to work with.

  Uninstalling the printer software

  After you have uninstalled the drivers and the printer software I need you to reinstall. To reinstall, I add two documents of reference below:

  Installation for USB under Mac OS X

  Installation of USB on Windows

  Because you use the printer for network and USB connections on your computer I suggest you first run installation from USB.

  Once the printer is installed for USB, then you can add in the wireless version.

  Adding a printer wireless on Windows:

  1. open the Printer Assistant software on your desktop. It should resemble a black printer icon and has your options of Scan inside.

  2. click on the 'utility' on the top tab

  3. click on 'software and configuration of the printer.

  4 enforce "connect a new device" for the network connection.

  This will add two copies of your printer and both will be implemented properly for scanning and printing.

  Adding a printer wireless on Mac:

  1. Click The HP utility icon in the Dock.

• I have a wireless HP printer which I can not complete the installation because I get an error message ' USB 2. OWLAN Code 28 driver for this device is not installed

  I uninstalled and reinstalled the CD for installation on a HPJ610 wireless printer.  I still can't print.  All I get is the error message above? Then I try to find it and it tells me that it is not installed?  What should I do now?  Does anyone know.

  I suggest you to uninstall and reinstall the latest compatible drivers for Windows 7.

  You can also run the troubleshooting of the printer.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx
   
  Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• TurboTax cd installation problem... Error message States "D:\setup.exe is not a valid Win32 application"... What is the solution to allow me to install my TurboTax program?

  Error message States "D:\setup.exe is not a valid Win32 application"... What is the solution to allow me to install my TurboTax program?

  Maybe a cd damaged?

  Hello

  ·         What is the service pack installed on your computer?

  There are changes that the CD is damaged. You can copy the file to install it on the computer and then try to install the application, and check.

  To install TurboTax, the condition of basic system for Windows is:

  Minimum system requirements

  Processor: 1 GHz 32-bit (x 86) or faster processor

  Operating systems:

  Windows XP (32-bit) Home edition or professional with Service Pack 3 or higher; or

  Windows Vista (32 - bit and 64 - bit) Home Basic/Home Premium/Professional/ultimate; or

  Windows 7 (32-bit and 64-bit).

  Administrator rights required to install and use TurboTax.

  RAM: 512 MB RAM (1 GB recommended)

  Hard drive space *.

  * Must be on the same drive that TurboTax is installed on

  ·         Federal products: 500 MB for TurboTax (plus up to 1.5 GB for Microsoft .NET 4 if not already installed)

  ·         Products from the States: 15 MB

  ·         Federal more State products: 515 MB for TurboTax (plus up to 1.5 GB for Microsoft .NET 4 if not already installed)

  Reader of CD-ROM: 2 X CD-ROM drive

  Monitor: recommended 800 × 600 resolution (1024 × 768) screen

  Internet access (required):

  Modem 56 Kbps (connection broadband recommended)

  Other software:

  ·         Microsoft .NET 4 (included with TurboTax Installer)

  ·         Adobe Reader 8 +.

  Printer: Windows compatible ink jet or laser printer

  Hope this information is useful.

• Try to use Windows movie maker but the error message

  Hello

  I try to import a file from a folder on my computer .mpg, but it keeps giving me an error message "interface has too many methods to fire events from. What does that mean?

  "... An interface has too many methods to fire events from... "a word geek, which translates as"... you try to use a MPEG-2 file in Movie Maker, and it won't import or work... ". ».

  The simple answer is to stop to try and convert the file to an AVI or WMV file that will work.

  Read all about it at the link below:
  Movie Maker 2 - Import MPEG files
  http://www.Papajohn.org/
  The left pane of the page expand "source Import movie files ', 'Video', click MPEG.

• I tried to update my Windows Live Essentials 2011, but an error message 80040609

  Original title: Windows Live Essentials: Error Code 80040609

  I tried to update my Windows Live Essentials 2011 but get an error message after installing up to Messenger. I tried to uninstall Windows Live, but it does not uninstall anything that I have now.

  I'm running Windows Vista 64 x

  Hello

  The question you have posted is related to windows live and would be better suited to the community of windows live. Please visit the link below to find a community that will provide the support you want.
  http://windowslivehelp.com/community

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• You try to run Cyberlink downloader to install updates Power DVD but the error message: visual c ++ error library time time to run

  Two days ago, I try to run cyberlink downloader to install the latest update for power dvd (compatible with win 8) .but every time appear the error message: visual c ++ run time time library sleeves application error - the requested to terminate it in an unusual way.what can do? I have the problem with the update.the only specific support has me unistal all visual c ++ redistributable, reinstall program.but had tried the remain.i problem and the security mode.any solution please?  I have win 7 x 64

  Hello

  You can get this error because of things:

  1. The Visual C++ library runtime components are missing. (You should of reinstalled after remove them because this software requires their)
  2. A problem with this software, it is possible a conflict with another software.

  If the problem is caused by #1, you can reinstall the latest version of the Visual C++ Library Runtime components and see if it solves the problem, but I do not know what version of the redistributable software requires.

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=14632

  There is also a 2012 version of the Redistributable:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30679