While the installation of Service Pack 3 error message comes as "Bullxp is not a WIN 32 application.

Similar Questions

• The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490).

  The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490). I tried in several ways through the links suggested to solve the problem and nothing has worked.

  
  

  I turned to the forums and I saw that many, many people have the same problem with Vista SP2 Upgrade. Microsoft and several of its Vista customers realized that Vista has a lot of problems, but people who have need of the service. Being able to download and install the SP2 can make Vista more stable, but I get the same message mentioned above, and so I am sure are a lot of other people who are trying to get Service Pack 2 integrated into Vista.

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  A repair install is the usual solution of SFC/scannow does not work.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.

  Uninstall SP1

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  TaurArian [MVP] 2005-2010 - Update Services

• I have two error codes on Windows update Code: 80240016 & an internal error has occurred in Ox80010108 during the installation of Service pack 1.

  Resolution 1: Install the stand-alone package for the service pack instead of using Windows Update to install the Service Pack

  Click here to show or hide detailed information

  Note If you have already tried to install the stand-alone package for the service pack and you have encountered this problem, skip this resolution and go to resolution 2.

  If you don't know if you've tried to install the stand-alone package for the service pack, it is recommended that you try the following steps to install the stand-alone package for the service pack. By using the stand-alone package to install the service pack, you eliminate installation issues that may be related to Windows Update. This simplifies the troubleshooting process.

  How to obtain the stand-alone package for the service pack

  To obtain the service pack, see the following articles in the Microsoft Knowledge Base, depending on your operating system, and then look for the option to install the service pack from the Microsoft Download Center.

  935791 how to obtain the latest Windows Vista service pack

  968849 how to obtain the latest service pack for Windows Server 2008

  Solution 2: Run the system update readiness tool

  Click here to show or hide detailed information

  System Update tool checks your computer and trying to resolve certain conditions that can interfere with the installation of the updates or other software. However, before you download the tool, you must determine whether your computer is running a 32-bit version or a 64 bit version of the Windows Vista operating system. If your computer is Windows Vista installed, and you know which version you are using, go to the How to download the system update readiness toolsection ".» If you are unsure which version your computer has installed, follow these steps:

  1. click on Start

  Collapse this includes this image

  .

  2. in the Search box, type System, and then click System in the programs list.

  Collapse this includes this image

  The operating system is displayed as follows:

  • For a 32 - bit version operating system, 32-bit operating system appears for the system type under System.
  • For a 64 - bit version operating system, 64-bit operating system appears for the system type under System.

  Collapse this includes this image

  After you determine which version of Windows Vista, your computer is running, download system update readiness tool.

  How to download the system update tool

  You can click here to download the preparation tool system update from the following Microsoft Download Center Web site. The following files are available for download from the Microsoft Download Center:

  Collapse this includes this image

  Download the System Update Readiness Tool for Windows Vista (KB947821) package now.

  Collapse this includes this image

  Download the update tool for Windows Vista x 64 (KB947821) package now.

  Collapse this includes this image

  Download the System Update Readiness Tool for Windows Server 2008 (KB947821) package now.

  Collapse this includes this image

  Download the System Update Readiness Tool for Windows Server 2008 x 64 (KB947821) package now.

  Collapse this includes this image

  Download the system update for the systems Itanium (KB947821) package.

  After you download and run the system update readiness tool, restart your computer. Then, immediately try to install the download package full of the service pack that you previously downloaded from the following Microsoft Download Center Web site:

  http://www.Microsoft.com/downloads

  For more information about the update of the system tool, click on the numbers below to view the articles in the Microsoft Knowledge Base:

  947821 description of the update for Windows Vista and Windows Server 2008 system preparation tool

  Resolution 3: Close or disable any applications that may be running, restart the computer and then install the service pack

  Click here to show or hide detailed information

  Important These steps may increase your security risk. These steps may also make the computer or the network more vulnerable to attack from malicious users or malicious software such as viruses. We recommend the process that this article describes to enable programs to operate as they are designed for, or to implement specific program features. Before you make these changes, we recommend that you evaluate the risks that are associated with implementing this process in your particular environment. If you decide to implement this process, take additional measures to protect the system. We recommend that you use this process only if you really need this process.

  During installation, one of the most frequent causes of failure occurs when a third-party application holds open a file or locks a file that the service pack installer should use. For example, an application third-party antivirus or antispyware may cause this problem. To minimize this risk, follow these steps:

  1. close all applications and restart your computer.

  2. Once your computer has restarted, disable any antivirus or any antispyware application that can load during the startup process. You can normally disable the notification area application. This area is located in the bottom right corner of the computer screen. To disable an application in the notification area, follow these steps:

  a. right-click on the icon of the third-party program.

  b. click Close, disable, outputor an equivalent term in the list of options. If these options are not available, you may open the application and then close or disable in the application.

  3. as soon as you close the antivirus or the antispyware software, try to click here to install the download package full of the service pack that you previously downloaded from the following Microsoft Download Center Web site.

  4. After completing the installation of the service pack, enable the antivirus or the antispyware software that you disabled in the previous steps.

  If your problem is still not resolved, you can try the steps of troubleshooting on your own, or you can contact Microsoft technical support.

  Resolution 4: Uninstall security applications, restart the computer and then install the service pack

  Click here to show or hide detailed information

  Important These steps may increase your security risk. These steps may also make the computer or the network more vulnerable to attack from malicious users or malicious software such as viruses. We recommend the process that this article describes to enable programs to operate as they are designed for, or to implement specific program features. Before you make these changes, we recommend that you evaluate the risks that are associated with implementing this process in your particular environment. If you decide to implement this process, take additional measures to protect the system. We recommend that you use this process only if you really need this process.

  A third-party security application (for example, an antivirus application, a firewall, or antispyware software) can still be causing the installation fails, even though you tried to disable the application. The Windows Vista SP1 installation requires several restarts of the computer, and the security application may be reload after the first reboot. Applications that provide registry repair features may also cause the installation to fail.

  You can uninstall your third-party security application before you install the service pack. However, you should do this only if you are positive that you can reinstall the application as soon as the service pack installation is complete. To reinstall the third-party security application, you'll need either the original installation media for the application, or you need the original download. You may also need a product key to reinstall the third-party security application.

  If you are sure that you can reinstall the third-party application, uninstall the application from the programs and features item in Control Panel. To do this, follow these steps:

  1. close all applications and restart your computer.

  2. Once your computer has restarted, click Start

  Collapse this includes this image

  .

  3. in the find what box, type programs.

  4. click on programs and features.

  5. click on the name of the security program that you want to uninstall.

  6. click on Uninstall.

  7. After you have uninstalled the program, restart the computer.

  8. try to click here to install the download package full of the service pack that you previously downloaded from the following Microsoft Download Center Web site.
  Note You have uninstalled your security software, and your computer is more vulnerable to attack by malicious users or by malicious software such as viruses. We recommend that you do not surf the Web, use e-mail, or use instant messaging, up to what you have done to solve the problem, and you have reinstalled your security software.

  9. After completing the installation of Windows Vista SP1, reinstall the security program that you uninstalled in the previous steps.

  * All of these resolutions were conducted, but still having trouble running SP1 & SP2. It's a problem of installation and after the installation of Service packs 1 & 2 times. I have a SYSTEM of 32-bit operating systems. KB947821 analytical TOOL has also been installed!, by following the instructions in res 2. Security / Antivirus has also been disabled in accordance with the instructions of res 3 & 4. Service packs Download but will not work!

  Get help the community?

  Hello DavidCarmichael,

  Thank you for your message.  I see that you have already run the system update readiness tool.  Feel free to skip step 1, but follow-up on the rest of the below troubleshooting steps:

  1. According to your architecture of Windows 7, download / install and run the tool update system - CheckSur you can download the tool from the links below depending on your system type.

  Download the tool update system (64-bit)

  Download (32-bit) system update readiness tool

  2. click Start type cmd (you should see the command prompt fill up) right click and select run as administrator

  Inside the command prompt, type sfc/scannow

  For more information regarding the file system checker.

  * If corruption is found, see How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  3. once the SFC is finished, check your hard drive for errors.

  4 restart the system update readiness tool. If errors have been eliminated, try to reinstall Service Pack 1. If this is not the case, go to step 5.

  5. perform a Startup Repair, when starting, try to install the Service Pack.

  Please let us know the results of each utility.  We can't wait to hear back on your part.

  See you soon

• I have windows xp after the installation of service pack 3 I can only start in safe mode

  I have windows XP after the installation of service pack 3 I can only start in safe mode?

  Hello

  ·         You get the error message?

  ·         What happens when you try to start in normal mode?

  Method 1

  Windows XP can in every start Safe Mode by default. Even if you select the option Start Windows normally, it always starts in Mode without failure. IOW, you can't get out of safe mode.

  This happens if the switch/SafeBoot is added to the Boot.ini file. / SafeBoot parameter forces a boot in safe mode by using the specified parameters. The available parameters are:

  (a) minimal (b) network (c) safeboot: minimal (alternateshell) For more information about the boot.ini switches, see visualization and correction of the settings of the boot on x 86 systems RESOLUTION (a) click Start, run and type MSCONFIG (b) click the Boot.ini tab (c) If you have a dual-boot system, select the entry that is appropriate under the [operating systems] (d) in section downstairs, Startup Options uncheck / hisFEBOOT (e) click OK (f) restart Windows The entry/SafeBoot are removed from the Boot.ini file.

  Method 2:

  If the above method is not the cause, it seems that Service Pack 3 is not installed correctly.

  Step 1: You try to run the system restore from safe mode that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  Step 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  Note: System requirements to install Windows XP SP3

  Reference: Learn how to install Windows XP Service Pack 3 (SP3)

  Hope the helps of information.

• service pack 3 error loading 'a components file does not match the verification information present in the component manifest ".

  service pack 3 error loading 'a components file does not match the verification information present in the component manifest ".

  I have SP2 with all updates, I have this error message after the failed attempt to load service pack 3.

  Hi Carl_Focus_Phone,

  ·         Is confined with Update Service Pack 3?

  ·         Did you do changes on the computer before the show?

  You can follow the steps in the article in the Microsoft Knowledge Base and check if that helps.

   

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  You can also see the following articles for more information:

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

   

  Learn how to install Windows XP Service Pack 3 (SP3)

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  Let us know if that helps.

• Reader of CD-ROM/DVD-Rom disappeared after the installation of Service Pack 2

  Why my CD-ROM/dvd-rom drive does not disappear after the installation of Service Pack 2 and how do I get it back? Because before I installed Service Pack 2 I had a problem of code 10 and tried deleting the thing fixing upperfilter, but that did not work, so is there anything else I can do. I have a HP Pavilion dv9000 and it is 3 years old.

  Thank you!

  Hello

  Check with HP, their drivers support and documentation online and ask in the HP Forums about known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ========

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Impossible to install programs, download 1628: failed to complete the installation after the installation of service pack 3

  Impossible to install programs, download 1628: failed to complete the installation after the installation of service pack 3. What I have to do.

  Assuming you meant WinXP SP3...

  Why the SP3 was not installed for over a year?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you tried to install WinXP SP3?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• "The expected Version of the product is not found on the system" error message during the Installation of Service Pack 1

  I got the error message 'the expected version of the product was not found on the system' when I was installing Microsoft Office Professional 2003 Enterprise Edition (Microsoft Office Outlook 2003 with updated business contact to update Manager) Service Pack 1. I wonder that someone has a solution to resolve this error message. Your help is greatly appreciated.

  Jim

  You cannot install Office 2003 Service Pack 1 when overview of InfoPath 2003 Service Pack 1 is installed

  If which are not related to the situation, suggest it ask you for help by the experts of the Officeinstallation, modernization, and activating Microsoft Office products Forum.

  MowGreen Services update - consumer safety

• "The expected Version of the product is not found on the system" error message during the Installation of Service Pack 3

  During the installation of Microsoft Service Pack 3, I get the message "The expected Version of the product is not found on the system."

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Downloads of SP3: -.

  Windows XP Service Pack 3 - file to Image CD ISO-9660:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2FCDE6CE-B5FB-4488-8C50-FE22559D164E&displaylang=en

  Windows XP Service Pack 3 for developers network installation Package and the professionals (unique facilities for the PC can use the same file)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

  How do you know if you are running a 32 bit / X 86 or 64-bit computer

  1. Click Start.

  2. Do right click my computer and then click Properties.

     • If you don't see "x 64 Edition" in the list, then you are running 32-bit Windows XP.

     • If "x 64 Edition" is listed under system, you are running the 64 bit version of Windows XP.

• Closing after the installation of Service Pack 1

  I just installed the Service Pack 1 update, and now my computer will not be closed.  If I click on Hibernate, sleep, or stop, the computer powers down and power back up.  I wait for the hard drive to stop running all the time and stop it again and it bounces upwards, even when the screen is folded closed.  Y at - it a setting I need to change or something?

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• ATI Radeon HD 4600 Series AGP Grapics card does not work since the installation of service pack of windows 7

  ATI Radeon HD 4600 Series AGP Grapics card does not work since the installation of service windows 7 pack has worked before

  Is not fully compatible with win7, some patches are available from ATI

  http://support.AMD.com/us/KbArticles/pages/CatalystAGPHotfix.aspx

• Problem with the installation of Service Pack 2 for Windows Vista. 8024200d error code.

  I have made several attempts unsuccessfully to update my vista using the automatic update for service pack 2, but I always "update has not 8024200d error number". I tried a start-up in minimal mode, but automatic update does not appear. I reached my intellectual limits. What means exactly the error 8024200d mean?

  How do I beat successfully automatically update?
  F....

  Hi Mubarak,

  Can you please tell me the number of KB article of updated with the question?

  Take a look at the response from here-

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/i-am-getting-error-code-8024200d-when-trying-to/b0ae43eb-8e84-4a71-94af-75318c984d45

  Thank you.

• Error code 0 x 80070490 during the installation of service pack 1

  * Original title: HELP

  desperately trying to update my leptop with service pack 1 for vista home B.
  downloaded service pack 1 manually, but for only error code0x80070490.se
  Help:)

  Hello

  Please follow the steps mentioned below and check if it helps.

  Method 1: Run System File Checker

  Scan system file checker on the computer that solves the problem with the system files. You can check the link for the steps below: how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:http://support.microsoft.com/kb/929833

   

  Method 2: Run the system update tool

  Run the tool update of the system from the link below: Description of the system update tool for Windows Vista, Windows Server 2008 for Windows 7 and Windows Server 2008 R2: http://support.microsoft.com/kb/947821

  You can also check: you receive an error code '0 x 80070490' when you use Microsoft Update or Windows Update Web sites to install updates: http://support.microsoft.com/kb/958044

  I hope the information is useful!

• Since the installation of service pack 1 to install pack antivrus on my laptop when I download updates windows I get error codes (80072EE2) and (8024402C) how to fix this?

  Since I installed the service pack 1 of windows on my laptop to install antivirus 2012 pack that I can no longer download updates windows. How can I solve this problem?

  I get error codes 80071EFE.  80072EE2. 80200010.

  Hello

  Perform the steps in the article mentioned below and check if the problem persists.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  Hope this information helps.

• Error 8000FFFF code during the installation of service pack 1 for Vista

  Hi, I downloaded service pack 1 for Vista 2 days ago. It worked, but I found myself with no sound. Anything not fixed so I uninstalled service pack thinks he should correct the problem. I have still no sound and now when I try and install service pack 1 again, I find myself with an 8000FFFF error code and it will not install and I still have no sound. How can I fix my sound problems and add the service module? (I do not really care about the service pack, just want my sound back!)

  Hello

  0x80000FFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update

  Microsoft obviously has a typo in somewhere between their links for number of Fs for more information that I give you

  http://support.Microsoft.com/kb/946414

  go to your computer or your site of manufacturers of sound card - drivers and downloads section - key in your model number - get the latest audio drivers

  _________________________________________________________________

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366