Installation KB967723, KB970430 and KB972145 survey error Code 80070490

Similar Questions

• Tried to update the computer and got the error code 80070490

  I tried to download the update, and I get the error code 80070490.  I tried to download one that you people told me to download to see if it corrects the problem.  He did not, then I was told that I needed to reinstall Vista from disk, but I don't have the disc Vista came already in my computer.  Is there a link where I can download from you guys directly.  Help, please.

  Hello

  M ode 1.      

  You can try to install the updates to the clean boot, please visit the link mentioned to perform the clean boot below.

  http://support.Microsoft.com/kb/929135

  Method 2.

  See the city link below to download and install the system update readiness tool

  http://support.Microsoft.com/kb/947821

  Method.3

  Follow the link below city to run windows update

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  See also: http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80070490

• Installation of codec and receive the error code 0 x 80070005

  I tried to install a codec and received this message,

  The Module 'D:\Windows\System32\MatroskaSplitter.ax was loaded but the call to DllRegisterServer failed with error code 0x80070005.

  I even tried to run it as an administrator from the command line and it fails.

  Can someone help me with this?

  Hi Seth,

  You can try to disable your security software temporarily to see if it is causing a conflict.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I run the stand-alone windows installer to thr and displays the error code 0 x 80240009

  When I ran the windows update stand-alone installation, it updated kb947821 hotfix, but after he would not install updates

  0 x 80240009

  WU_E_OPERATIONINPROGRESS

  Another operation in conflict was underway. Some operations such as the installation cannot be performed twice at the same time.

  Restart and try again.

• When I download and try to install Adobe Installer for creative cloud, I get error Code 43. Setup could not copy a critical file. Please try again.

  When I download and try to install Adobe Installer for creative cloud, I get error Code 43. Setup could not copy a critical file. Please try again.

  It's on Windows 7 Ultimate SP1. I can not install one of the adobe applications.

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• Error code 80070490 during installation KB978342

  Original title: ERROR DOWN LOAD UPDATE

  I get the error code 80070490 after trying to install the update of KB978342 security, could help with this you problem? seems to down load all the other updates ok I have vista Home premium, service Pack 2, 32-bit

  Don't know what you're updating trying to install as I couldn't find it.

  With regard to your error.

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  See also: how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  A repair install is the usual solution of SFC/scannow does not work.
  However, a repair (AKA In-Place Upgrade) installation will be not solve the problem if it is due to a hijackware infection.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 or SP2 for Vista

  Uninstall the Service Pack/s: How to uninstall Windows Vista service packs as a troubleshooting step
  http://support.Microsoft.com/kb/948537

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because Service Pack/s are installed and that your operating system is newer than the system you are trying to reinstall, so service pack/s must be removed in this case.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

  Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

  Would you advice, thank you.

  Hi Hugo,.

  1. what anti-virus software you have installed in the computer?

  2. What is the full error message/code?

  3. the issue occurred after you install Minecraft?

  4. are you able to play Minecraft without any problem?

  5. what happens with Antivirus and Java?

  Windows Update can occur if one or more of the following conditions are met:

  1. the Windows Update database is damaged.

  2. antivirus software is configured to scan the %Windir%\SoftwareDistribution folder.

  3. the service (BITS) Background Intelligent Transfer Service does not receive a content link header.

  4. a required system file is incorrectly registered.

  5. Windows Installer has encountered an error.

  6. the manifesto of component maintenance (EC) is damaged.

  7. the Windows Update service has stopped during the installation.

  8. a version of the file conflict exists with Windows Update agent files.

  Please follow the steps described in the methods to solve the problem:

  Method 1: We will try the steps from the following link and check the result:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058?WA=wsignin1.0

  Method 2:

  To correct the errors that occur when you use Windows Update, install, and run the system update readiness tool. The tool analyzes inconsistencies on your computer and fixes as its current installation.

  You can view the following link to download the system update readiness tool and check:

  System tool update that corrects problems of Windows Update is available for Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Details of the event log to find what caused the Antivirus and Java to fail:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Hope that the information provided is useful.

  For any help related to this problem or any question of Windows, you can still display in the Microsoft Community Forum!

• installation of updates, I get this error code 80070103

  Installation of updates, I get this error code 80070103

  Installation of updates, I get this error code 80070103

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner. Delete everything is found.

  Reset.

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Try to get updates.

  If it still does not work, try this...

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:
     
     net stop wuauserv
     CD %SystemRoot%\System32
     Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
     net start wuauserv

  3. Reset
  4. Try to reinstall updates

  * Important * When you do this, the following problems occur:

  • Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.
  • When you remove the Software Distribution folder, your download history is deleted.
  • If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.

  
  * Note * if the problem is resolved and you can successfully download and install the updates, you can delete the directory SoftwareDistribution.old to recover disk space.

  STILL no?

  Use this FixIt:
  How to get the latest version of the Windows Update Agent

  Reset.

  Save components WU:

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:
     regsvr32 Jscript.dll
     regsvr32 c:\windows\system32\wuapi.dll
     regsvr32 c:\windows\system32\wuaueng.dll

  Reset.

  Try updates.

  If it still does not work after that - repeat

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  ... once more. Restart and try to get updates again.

  In any case: back - let everyone know what is happening.

• Windows update does not work and displays C80044E error code.

  Windows update does not work and displays C80044E error code.

  Hello

  I suggest you to try the steps below and check if it helps.

  View update history.

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Let me know the description the updates that do not have the status.

  Method 1: Try to reset components to update Windows from the following link and then try to install the updates.

  http://support.Microsoft.com/kb/971058

  Method 2: If the problem persists then try to set your computer in check and clean boot state, if the same problem occurs.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  More information: The problems with the installation of the updates:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Hope this information is useful.

• I want to activate my window vista business, but when the window is activated, I have a problem and it is error code is 0xC004C020

  I want ro activate my vista Enterprise window, but when the window is activated, I have a problem and it is error code is 0xC004C020

  Visit: http://www.microsoft.com/genuine/diag/> and click on "start the Diagnostics.

  `~`

  0xC004C020 error code

  Symptom

  When you try to use a MAK to activate one or more computers, you may receive the following error message:

  0xC004C020
  The activation server reported that the Multiple Activation key has exceeded its limit.

  Cause

  The MAK has exceeded the activation limit. By design, MAKs have a limited number of activations.

  Workaround

  Contact the product activation call center to obtain a new MAK or to increase the limit on the existing MAK activation.

  `~`

  What type of license you have?

  If you have an OEM or FPP product, then you should have your license key on your computer or on the packaging. Contact the Microsoft Activation Center to find out if your product key is valid:

  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.

  4. take the phone activation option and brace yourself for a real person.

  `~`

  During the activation of the phone

  Go to Start

  Click run

  And type SLUI 05

  In the drop-down list, select the name of the country you live. This is important because depending on the country you select, you will assign a number to call.

  Click the nearest location > United States

  Click Next

  This window contains all the information you need.

  Step 1 contains the number you call.

  Step 2 contains a series of unique numbers, you will need to provide the series of numbers to the operator (don't make any mistakes).

  Step 3 If everything is Ok, the operator will provide you with a confirmation ID, you will need to enter numbers in the boxes in step 3 and press ENTER.

  Activation of the telephone process is simple, try to use common sense in his answers.

  If the confirmation correct what ID provided it must be welcomed by a new window confirming a real installation.

  UTC/GMT is 23:00 on Saturday, November 19, 2011

• Failed installation error Code 80070490 Windows Vista update KB976098. How to install this update or keep the windows to try to re - install?

  Failed installation error Code 80070490 Windows Vista update KB976098.  How to install this update or keep the windows to try to re - install?

  http://support.Microsoft.com/kb/958044

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Error Code 80070490 Security Update for Windows Vista (KB967723)

  When you try to download the update for Windows Vista (KB967723) security it crashes and I get an error code 80070490.  This runs on Toshiba T9400 laptop computer running Windows Vista

  http://support.Microsoft.com/kb/958044

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  For Windows Update issues:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• my copy of CS4 is not allowing me to open it, whenever I have it try state that the license is no longer works and gives an error code: 6. this problem occurs on my laptop works fine my office copy [from the same CD, etc.]

  my copy of CS4 is not allowing me to open it, whenever I have it try state that the license is no longer works and gives an error code: 6. this problem occurs on my laptop works fine my office copy [from the same CD, etc.]

  Exit code: 6, Exit Code: 7 Installation error - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

  The problems with the Setup logs. CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for more information on how to review your Setup logs

• I use windows 10 on pc. Creative cloud must update. He gets 2% and keep saying "error code: 81 please close the other setup programs" when you look at the Task Manager, no setup program is running. What should I do? Photoshop and Lightroom will not wor

  I use windows 10 on pc. Creative cloud must update. He arrived at 2% and stops, saying: "error code: 81 please close the other setup programs" when you look at the Task Manager, no setup program is running. What should I do? Photoshop and Lightroom do not work for me right now.

  Close applications or contradictory processes

  Solve the problems of downloading and installation of Adobe Creative Cloud

  Mylenium

• Trying to install creative cloud, stops at halfway and gives me error Code: 1.

  Trying to install creative cloud, stops at halfway and gives me "error Code: 1'." When I looked at what that means, it tells me to uninstall, then try again. There is nothing to uninstall. I disabled my firewall and disable all security software. Even went to the properties to UNLOCK program to settle, giving permissions to all. Even as an administrator. Even tried in safe mode, nothing. Same mistake NEVER ONE TIME! Then I downloaded Adobe Assistant I think that another program... It installs and shows that the installed programs, but what that leaves is a folder on the desktop with the name of 2 programs, but there is nothing for them.

  Using the Support Chat from Adobe is the ONLY way it worked! It just took about an hour. But I insisted for them to take over my computer. There was much too much that they had to do, open, and delete stuff. They had to download additional software to try to solve it. They had mistakes throughout, but now installed InDesign Creative Cloud AND. As I said, ask them to do it for you because it's worth against the endless hours, I tried to resolve the question of my own, search the forums, make suggestions, without success. Once I saw my program PASSES the bar of 42%, I knew that they fixed. They will still open the program to ensure that it properly installed. If you highlight the contact on the Adobe site, answer a few questions and then click on NEED of EXTRA HELP. Then connect to the chat. TOTALLY FREE! And you just sit back and watch everything they do, for about an hour. How long approximately it is. But they know what they're doing for sure. As I said, I tried all the available on websites, forums, chats and connect them directly to my computer support, IS THE ONLY THING THAT WORKED they are awesome if you get someone who knows what they're doing, unlike only one, that I had later in the night, which had no idea. I've disconnected and got another person, which sets the creative cloud. Now the rep just fixed and installed InDesign. Save yourself the extra stress as if I was, because I was so frustrated! They are awesome