Installation of a cd-rom that is not compatible with windows 7 in my notebook window 7

Similar Questions

• Video card issues 'Windows cannot read this disk. The disc is maybe damaged or it could be in a form that is not compatible with Windows.

  Original title: card video questions

  My company adds two monitors to existing systems that are also running good XP and windows 7. Everything goes smoothly with the exception of one system using windows XP. I replaced the original video card (ATI DELL X 1300 128 MB VIDEO CARD in the PCI-E DVI TV-OUT) with nvidia GeForce 8400 GS and when I try to install the drivers through the disk, I get the following message: "Windows cannot read this disk. The disc's might be corrupted or it could be in a form that is not compatible with Windows. I flashed the BIOS, but still nothing. Do I need a different video card?

  Hi TheRealBradB,

  ·         The computer is on a domain network?

  You can download and install the drivers from the nVidia GeForce 8400 GS video card for site.

  GeForce 8400 GS video card

  http://www.nvidia.com/page/GeForce8.html

  You can run the Autodetect your GPU and check the drivers.

  Also contact nVidia support for help on the issue.

  NVidia support

  http://www.nvidia.com/page/support.html

   

  Hope this information is useful.

• Error: "drive could be damaged, or it could be in a form that is not compatible with Windows.

  Original title: CD - R driver problem please help if you can

  I have a white mark of Memorex CD - R into my drive (D :) and when I try to read it, this happens, "disk may be damaged or it could be in a form that is not compatible with Windows. I have Windows XP on my desktop, any suggestions for help? :(

  Hi MichaelPrincipe,
  -Other recognized CDs without any problems?
  Try to use the CD on another computer and check if it is recognized without any problems.

  Run the fix it tool is given in the link below and check if it helps.

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

• My CD of installation of IntelliPoint 6.3 mouse is not compatible with Windows 8. ???

  I find that my installation of IntelliPoint 6.3 mouse that CD is not compatible with Windows 8, which I just got on a new desktop PC. I plugged the transmitter/receiver and the PC recognized it and it works. But I am concerned about other facilities that are located on the CD. Is there a way I can install/update? Please can someone help here?

  Hello

  I installed a few programs that post this message...

  I just could choose something like "run anyway", ignore or whatever and check the box to display the message...

  That might work for you, but maybe not. It's the kind of a technique blindly.

• I have a piece of test equipment that is not compatible with Windows Vista 64 - bit edition. Is it possible to go back to the 32-bit version without having to re - install?

  The test equipment is a Site Master S820D used for the test of microwave signals.  It is not compatible with Windows Vista 64-bit, but is with Windows Vista 32 - bit.  Want to know if there is a way to get back to Windows Vista 32-bit, without having to buy a new operating system.  The program is called "Site Master Handheld Software Tools".

  Hello

  If you want to move from a 32-bit version of Windows to a 64 bit version of Windows Vista, or vice versa, you will need to back up your files, then select custom during installation of Windows Vista. Next, you need to restore your files and reinstall your programs

  Use the links below.

  Installation and reinstallation of Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  32-bit and 64-bit Windows: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/32-bit-and-64-bit-Windows-frequently-asked-questions

• Simply accounting is not compatible with Windows 7 Home Premium

  I run a small business, I was using the new version of simply accounting for windows XP. I upgraded my computer to a new dell and chooses the home version of windows 7 as my operating system. I discovered windows 7 does not work for all programs compatible xp. I read on microsoft Windows 7 PRO has been designed to reduce the costs of upgrade for small business and would open and administer programs of popular work, so I've upgraded to PRO but still cannot load my accounting program. I have a simple UPGRADE accounting for windows seven, but I have to install the Basic program before I can install the upgrade. So the problem is that if you can not install the original program, you can not install the upgradeDoes someone has an answer?

  Hello

  Yes Windows 7 Pro is designed to reduce costs.  This is because you can download and run the freeXP Mode .  This will allow you to run XP just within your installation of Windows 7 as a Virtual Machine and run software that is not compatible with Windows 7.  There is an option for you if you do not want to purchase a new compatible software.

  Kind regards
  Alex T.
  ~ 2007-2011 MVP Windows desktop experience ~
  This answer is useful? If so, please consider clicking on the green button to Vote as helpful for the benefit of future visitors with the same question.
  If this post as a solution please mark it as the answer to help others. Thank you.

• I use software that is not compatible with FF 4. I am able to download a previous version and delete FF4?

  I have a software that is not compatible with FF4. I would like to revert to a previous version of FF. Perhaps 3.x. Is it possible and how can I do this if it is. It will probably be a short-term situation until the software is updated for compatibility.

  To return to the previous secure version which is 3.6.17, follow these steps:

  1. Go to Download Firefox v3.6.17 and upload it to the office.
  2. Then go to add/remove programs, scroll down to "Mozilla Firefox" and delete it, choosing to keep your bookmarks, customizations, etc. (don't tick the box).
  3. Reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox
  4. Finally, run the installation file downloaded previously on the desktop.

  Your bookmarks, etc., customizations are stored in a different location and will become available to you even once you complete the installation.

  After completing the installation, go to the Plugins check page and update if necessary.

• Windows Upgrade Wizard has detected a few programs that is not compatible with 8.1

  Original title: 8.1 update

  Windows Upgrade Wizard has detected a few programs that is not compatible with 8.1 and must be upgraded.

  Will I upgrade first and then move to 8.1?

  What happens if 8.1 upgrade will not be successful? Upgrade programs works with 8.0?

  These aren't compatible programs

  My main concern! It takes to remap all my BT devices? Where I can get the re-installation of?	Intel (r) PROSet/Wireless for Bluetooth (r) + high speed Intel Corporation Reinstall this app point 8.1 Windows
  	iTunes Apple Inc.. Remove the CPA allowed
  	Yahoo! software update Update available
  	Realtek USB 2.0 card reader Realtek Update available

  Yes, should be updated first before upgrading to Windows 8. 1.

  You can always save before moving to 8.1 in case the update is not successful.

  http://techingiteasy.WordPress.com/2012/10/29/how-to-backup-your-Windows-8-installation/

• Windows 10 November update stops at 32% saying that Intel 5100 Iris was not compatible with windows 10

  I use a Mac Mini 2014, El Capitan, Windows 10 Pro with Bootcamp

  I'm trying to update my existing windows 10 in 1511 10586. 32% the system constantly to say that installing Windows 10 his is not possible, as the Intel 5100 Graphics Iris is not compatible with Windows 10. On the other hand I'm already on Windows 10 with Iris 5100 with no problems. No idea how t resolve that? I did find something similar in any other forum...

  Thanks for your help!

  Windows 10 1511 pushes a WHQL driver on the 5100. Before you start the upgrade, please disconnect the Internet Mini/Windows and then try again. You can also disable the automatic updates of Windows.

• HP Deskjet 5400 says that it is not compatible with Windows 10

  I try to install my printer on my laptop with the usb cord and when I try to install it, I get the error message that it is not compatible with Windows 10.  Don't know how to fix this or if my printer is simply too old for me to do something.  Help, please!

  You must use the built-in Windows 10 database driver.

• XP to Vista upgrade, the message that Vista is not compatible with Windows XP

  Original title: Upgrade Vista XP

  I tried to update my windows XP to Windows Vista and get the error message that Vista is not compatible with Windows XP. It is an original cd of dell that I got years ago and have not upgraded I liked XP. Any thoughts on patches or fixes for this?

  Hi Dennis,

  The upgrade to Windows Vista from Windows XP requires some preconditions for the computer that you have this problem in. This article treats all these prerequisites. I suggest you read the information in this article and see that if your situation meets all the conditions required or not, here is the link:

  http://Windows.Microsoft.com/en-us/Windows/installing-reinstalling-Windows#1TC=Windows-Vista

  Please check all of the information provided in this article carefully. Keep us up-to-date with the status of your side, we will be happy to be of further assistance.

• The software you are installing has not passed windows logo testing to verify that it is compatible with windows xp

  When installing Football Manager 2011, when its almost finished, he said:

  "The software you are installing is not windows logo testing to verify that it is compatible with windows XP. Please contact your system administrator.
  I guess its because I have a really old laptop, but if someone could confirm this or help it would be greatly appreciated!
  Thanks in advance

  Hello

  Not his because that the game developer has not presented the program of Microsoft
  Logo program that charges a fee to certify programs. It may very well be if he is a large
  producer of games. Also check with the developer of this game for more information.

  I hope this helps.

• I want to install the Commander of the force star wars on my new PC, but says it is not compatible with windows 64-bit. I try the windows XP mode and it tells me that I need to connect a hardware device 3D

  I want to install the Commander of the force star wars on my new PC, but says it is not compatible with windows 64-bit. I have try on windows XP mode and it tells me that I need to connect a hardware 3D device. I really love the game and I want to use it again.

  Any old copy of Windows XP that could be installed in the host system? If you do not, it should be available at a modest price of an online seller. Perhaps (I'm not too), even an old Windows 98 TO work. The game (using a 3D engine) will not work under pure DOS, so you need a Windows environment so that it can work. Just FYI: If you get this old classic to run, new issues may arise. Known are the "mss32.dll" runtime error (you may need to replace this file with the newer version of SW:KOTOR 1) and the issue of video cutscenes (the games uses an obsolete video codec, Smacker - either you find an old *.) DLLS for it or have you convert movies in a modern format).

  In conclusion: get old games to run on software/hardware modern (it is not only a problem of BONE) is one of the most fascinating and rewarding challenges to a real fan. But do not expect it will not be easy "out of the box" (or simply insert a CD).

• Get "key to upgrade is for the edition of windows that does not work with Windows Anytime Upgrade"

  The PC is running Windows 7 Starter.  I'm trying to upgrade to Windows 7 Professional. I bought the card from Windows Anytime Upgrade Key.

  When I entered the PK, error, "put key in level is for the edition of windows that does not work with Windows Anytime Upgrade"

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  Additional resources:

  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-windows_install/how-to-successfully-do-and-troubleshoot-Windows/47e1943f-8255-452A-a7ad-2ae14dc974af

• "Windows 7 Home Premium SP1 64-bit, an error message indicates" the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade.

  Tried using Windows Anytime Upgrade. Bought at Staples have product key is entered correctly. "Following instructions, accepted USA get error message says ' the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

  Which edition of Windows 7 is installed on the machine?

  Which edition of Windows 7 you are trying to do an Express upgrade to?

  Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.

  ---------------------

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade