Installation of Active Directory LDAP for the editor

Similar Questions

• WLC 5508 Active Directory / LDAP integration to authenticate

  Hello

  I am redundant deployment WLC 5508 with 4 VLANS and 4 SSID matches it, everything works fine, now I have to do the below, then please put your valuable comments and advice.

  1. I need all users authenticated with existing Active Directory/LDAP wireless

  2. I create accounts invited in my ad and go to the guests, so comments should only Internet access except the company's resources

  2. How can I get my VoIP VLAN for wireless phones. I want to only wireless phones to connect to VLANS voice. No internet access on VLan VoIP

  Concerning

  Dinesh

  Hello

  1. I need all users authenticated with existing Active Directory/LDAP wireless

  2. I create accounts invited in my ad and go to the guests, so comments should only Internet access except the company's resources

  YEARS 1 & 2 - the link below provides the example config and also the memorandum of understanding on the conditions depth, please go through the link atleast once...

  http://www.Cisco.com/en/us/products/ps6366/products_configuration_example09186a0080a03e09.shtml

  2. How can I get my VoIP VLAN for wireless phones. I want to only wireless phones to connect to VLANS voice. No internet access on VLan VoIP

  YEARS - you can configure the auth required for WLAN voice and then NAT this interface VLAN so that he won't get out of the internet!

  Let me know if that answers your question and please do not forget to rate traore useful messages!

  Concerning

  Surendra

• Just bought 2 updates of Pro XI A. Installation and activation went well on the desktop, but said no laptop activation serial. is valid but cannot find a product calling on this cmptr, even if this window appears A Pro XI upstairs and Pro XI is insta

  Just bought 2 updates of Pro XI A. Installation and activation went well on the desktop, but said no laptop activation serial. is valid but cannot find a product calling on this cmptr, even if this window A Pro XI upstairs and Pro XI is installed. And is NOT in the drop-down list to select a Pro XI product.  What is going on?

  The product 'calling' is your old Acrobat - 9 or X. You need the serial number of this old version.

• Windows Server 2008 R2, with two Windows Storage Server 2003 Standard: How can I add the MAC authentication on top of Active Directory authentication for a storage servers?

  I have two running Windows Storage Server 2003 storage servers in a domain R2 Windows Server 2008 Standard.  On top of the Active Directory authentication, I want to add authentication of MAC address for the access to one of the storage servers.  In this scenario, an authenticated user is unable to log on to the target storage server unless the user is also on one of the computers MAC address accepted.  All domain users will have access to other folders and files as configuration storage server in Active Directory.  I already have a user access to installation by the permissions for folders on the storage server target, but I still want to restrict access to specific computers as well.  For what it's worth the server hardware is HP Proliant DL360 G5 for the Standard Server 2008 R2 and server HP Proliant DL185 G5 for two Storage Server 2003 computers.  I don't want to have MAC address authentication as the main means of access control to the network, only for the storage server a as an addition to control Active Directory.

  Hi Kerry,

  The question you posted would be better suited in the TechNet Server Forums since we have dedicated to this support; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Keep us informed on the status of the issue.

• OracleServiceXE does not start after the installation of Active Directory

  Hello people,
  
  New to Oracle but competent in general I.T. stuff. Client has contacted saying the role Active Directory is installed on the box Server 2008 operates as a virtual machine. After which client could access is no longer remote server and subsequently deleted from Active Directory. Since then, OracleServiceXE will not start and no response on the homepage of Oracle apex / http://127.0.0.1:8080 / f? p = 4950.
  
  I see a lot of other posts here for a resolution of the problems that led to the relocation of the software. We are OK with that. However, I would check the database of the customer will be able to be put back in place after reinstalling? If so, what is this process please?
  
  We are open to troubleshooting and so if there is a solution relatively easy but otherwise open to reinstall.
  
  We are open to paid support if necessary that the client has been down for a few days now.
  
  Please help!
  
  Thank you
  
  Jon

  JL09 wrote:
  VALID 4.1.1.00.23
  APEX_040100 AUGUST 20, 2012 14:45:38

  XE includes Apex version is 4.0.2 I believe, so 4.1.1 would mean an upgrade has been done or at least tried. This is consistent with the loss of the app to start and perhaps also the http port disabled.

  I would like to ask if anyone knows on the upgrade of the Apex, especially for about 20 August.

  Of course, there is the theoretical possibility that db restored files came from a different set of installation/database XE, why we see Apex upgraded, etc.

  You have an install*.log file? (install.log)

  Perhaps it is a facility of the Group of hotfixes. You have all the files matching a search for the apxpatch. * ?

  Get the login page will once again, try the step install message update (download) the Images directory, upgrade installed by installation guide (or group of patches note).

  http://docs.Oracle.com/CD/E23903_01/doc/doc.41/e21673/otn_install.htm#BHAJIGDA
  http://www.Oracle.com/technetwork/developer-tools/Apex/application-express/411-Patchset-notes-1528994.html#CHDIHHHD

  Published by: orafad on November 4, 2012 23:44

  Published by: orafad on November 4, 2012 23:54

• While trying to install AD RMS, I came across the following error message on the Installation results page: Rights Management Services Installation of Active Directory was successful with errors

  Try to configure the Server Active Directory rights management failed. Exception has been thrown by the target of invocation. to

  System.DirectoryServices.Configuration.ProvUtils.EnsureGroupMembership (String
  strTargetComputer, String strUserName, string strGroup, Boolean, String strDomain
  fShouldBeMember)
  at Microsoft.RightsManagementServices.Configuration.ProvisioningBase.EnsureUser)
  at Microsoft.RightsManagementServices.Configuration.ProvisioningBase.Run)
  at Microsoft.RightsManagementServices.Configuration.ProvisionerBase.DoProvision)
  at Microsoft.RightsManagementServices.Configuration.ProvisionerBase.Run)
  to Microsoft.RightsManagementServices.Configuration.ProvisionerHelper.Run (OperationType
  operationType, data object)
  to Microsoft.RightsManagementServices.Configuration.ProvisionEngine.Run (OperationType
  operationType, Boolean passwordEncrypted)
  at Microsoft.RightsManagementServices.Configuration.CmdLineHandler.Run)
  Delete and re - install AD RMS to try the implementation again.

  Hi Samuel

  Your question is beyond the scope of these Forums for answers. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

  Directory Services Forum - Technet:
  http://social.technet.Microsoft.com/forums/en/winserverDS/threads

  Concerning

• How to disable authentication for application installation in active directory

  I'm a rookie,

  I am system admin at my company and I've implemented active directory in my company.

  every time an employee application, then ask his user name and password and it's good.

  However, there are some users VIP who doesn't want that. So, how can I disable it only for some users so that they can install applications.

  Please help me.

  I am a new joinee in my company and want to learn a lot of things.

  Please help me to provide the best it services my copmpany.

  All want to help me, then please write to me on

  Kind regards

  Faraz

  Hi Faraz,

  Thanks for posting your question in the Microsoft Community forums.
  The description of the problem, I see you want to disable authentication to install applications in active directory for some users.
  As the computer is connected to the domain network, the question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads
  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• Installation of Active Directory and the reconciliation

  Hello world
  
  I want to install Active Directory as target resource.
  I've implemented server connector according to \activedirectory-11.1.1.5.0\documentation\oim\ActiveDirectory_guide.pdf
  I put the key.
  
  Once all operations of installation, I tried to recon research group.
  But an error occurred:
  
  oracle.iam.connectors.icfcommon.exceptions.IntegrationException: connector ConnectorKey (connectorName bundleName = ActiveDirectory.Connector bundleVersion = 1.1.0.6380 = Org.IdentityConnectors.ActiveDirectory.ActiveDirectoryConnector) not found.
  
  
  Thank you.
  Best regards.

  Is the connector server is running, you copied in pots on the connector as suggested in the document server

• Attributes to Active Directory user in the ADF code

  Jdev Version: 11.1.1.7.0

  We are required to remove e-mail from Active Directory for the logged in user information and send an automatic e-mail. Security context exposes ADF LDAP user attributes?

  Is it possible to get the attributes of user without making a LDAP search again and instead of the connected in the context of the user?

  AFAIK you hand o get the attributes.

  This blog could help anything on the Fusion Middleware: retrieve the profile identity store modules

  And this blog Oracle Fusion Middleware security: two or three things you need to know about the API of the user role /

  Timo

• Problem of activating Windows 7: for the upgrade product key

  Hi there I had to replace my drive hard when he died, so I installed windows 7 on it instead of upgrade of vista because I never had a vista disk when I bought the laptop, but when I went to turn it on he told me that the key was invalid because it was only for the upgrade.  Is it possible to fix this problem or get a new free activation key since I already paid for the upgrade?

  You can reactivate your Windows 7 installation by doing the following:

  1. click on the Start button and in the box, type search: slui.exe 4

  2. press the Enter key on your keyboard.

  3. Select your country.

  4. follow the instructions for the activation of the telephone (toll-free).

• ACS 5.1 using Active Directory to manage the strategy of network device Admin

  Hi guys, we have configured an ACS 5.1 and integrated with active directory Win2K3, we created two AD groups to manage devices network for administrators and one for operators (read-only), so we have configured a device admin strategy and the two groups work very well, but now we are facing a little problem any user that exists in the AD can connect (user exec mode) network devices and we want to cancel the connection with politics, but we do not know how.

  Is there a way to get a user authenticated against acs internal or external group, but at the user level, everything as you can make it to GBA 4.X?

  Thanks for your help!

  Best regards

  Oscar

  Yes, you can change that, it's a profile of shell by default. You must create a new one with privilege level "not in use" and select the new profile of the shell (no Directors or Operartors) under Default Device Admin > authorization profile > edit and make changes.

  I hope this helps.

• Active directory certification for OAM 11 GR 2 using OVD

  I am aware that OAM 11 GR 2 doesnot support Active Directory (AD) 2003.

  We had a use case in support of Federation using OAM 11 GR 2 somehow. I noticed that the last version of OVD 11.1.1.7 located support AD 2003.

  So can assume us that we can use AD 2003 with 11 GR 2 OAM for services of the Federation if we use OVD as the identity store?

  Thank you

  Nassima

  Got confirmation from Oracle it's possible!

• I downloaded the application Office CC, but the installation, install stop and demand for the internet connection, but the connection is on permanently.

  After you download Creative cloud of installation. I start the installation after initialization of Installer, Installer asking me to connect to the internet, then try again, but my computer is already connected to the internet through an ethernet cable and wireless, how to get around my problem.

  I had Adobe Application Manager already installed on my computer and it was recalled that there are updates for my Adobe programs, but when I open the updater and try to update my application programs manager could not connect to the internet.

  I want to install Adobe Creative Cloud Desktop App, but cannot do so, please offer a solution.

  Kind regards.

  Arthur

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• Create Active Directory accounts for vSphere 5.1 Services

  To put in place the pieces of vSphere management, I need to have an account or accounts created in Active Directory.  I need to figure out how to create and what permissions they need.

  In authentication single server, I need to choose an account that vCenter server will use when it connects to the PSO.  I can use a default admin@system-domainvalue.  Or I can add an account configured in Active Directory.  Or, I can also use a group active directory instead of an individual user.  What is the best way to do it and if I use an AD account, what permissions need at the domain level and at the local level on the SSO Server?  (I use multisite mode, so I can't use local accounts)

  In SQL Server, I need to choose an account to use for the SQL server service.  This account or an active directory account or a local user account?  If so, what are the permissions should be assigned to the account in Active Directory and the permissions that should be assigned to the it on the local computer?  This group of ads, if no it should be part of?  Should what local authorities?

  In vCenter Server, I need to choose an account to run the "vCenter Server Service" in.  It is best to use the default "system" account or use an Active Directory account or a local account?

  I'm trying to get an overview of account/group AD use policy which covers the main parts of vSphere management - vCenter Server, Single Sign on, inventory Service, Web customer service.

  For example, create a group called 'vSphere Services', then create separate accounts for each element of the management and assign them specific permissions on specific systems.  Or create separate groups for each element of the management and assign permissions to the groups.  Is it better to consolidate some of these user names or split out them?  Experiences / suggestions welcome.  Thank you.

  Hello

  For general services, I use a specific service account in the ad. That was before the SSO and I use the same after SSO. SSO is used by only two services that I know not yet (the inventory Service and perhaps vCloud). However, there are several other service accounts to be created. You want an account by service and I use AD to do so, this way I can create a group of service accounts and give it appropriate roles and privileges. For example, I have service accounts for:

  • VMware View
  • XenDesktop
  • vCops
  • HPSIM
  • SolarWinds
  • VMTurbo
  • NetApp
  • etc.

  A service, a service account, each with a general role or a custom role according to the requirements of access to vCenter.

  For SSO, I have to wait on general information, but I created mine enough basically to cover only the resources that use SSO. Given that the vast majority of the items to not use the SSO, the rule still applies.  Once the SSO is supported by more than one or two tools, you always have to maintain this separation.

  Then I say yes, tie SSO to AD and do everything in one place, unfortunately, is not very clear, or at least wasn't for me and these issues SSO are either beng fixed, documented, or both.

  Best regards

  Edward L. Haletky aka Texiwill

• Is Active Directory Connector supports the following features in IOM

  Hi all
  
  In the Active Directory Connector (9.1.1.7) supports the following features in OIM11g.
  
  The AD administration, audit, delegation granular delegation/roles, trash, power of Attorney ad
  
  Thanks in advance.

  The ADC supports only user management.

  I don't know what you expect as "" AD administration, audit, delegation granular delegation/roles, trash, power of Attorney ad "»

  With connector AD media can create/delete/edit/disable/enable/add role to the user of the user/remove groups of levels/manage/Group Manager

  See the connector AD for more details