Installation of CDA error (context directory Agent)
I want to install ADC (context Directory Agent) version 1.0.0.011 on VMware for the first time and I'm running into the following error message:
Detected virtual machine host...
Error: Cannot detect the size of hard drives
Quit Setup
Stop running...
After the installation stops and he said "you can safely restart your system. I have confirmed that everything is configured correctly by VMWware. I use an ISO mounted to perform the installation on an empty virtual disk. Not sure if there is something special that I have to configure in VMWare to make it work.
With all of the minimum requirements met and the correct operating system is selected, this issue has been observed when the SCSI controller is set to VM Paravirtual. When the SCSI controller is changed to LSI Logic parallel, the issue is no longer seen and gives a successful of the ADC installation.
Tags: Cisco Security
Similar Questions
-
Hello
I would like to set up and test AAA on a Cisco ASA (5505 or 5510).
1 are there any other tools or server required to use this feature? And you have good configuration guides?I already tested a CDA of Cisco. He was able to show users active directory and their IP equivalent.
2. do you have a brief explanation what kind of opportunities I have with this server/tool? It is perhaps usable for the AAA mentioned on the SAA?Thanks in advance
Best regards
1. Yes, you need a Radius like Windows Server NPS or RADIUS server such as Cisco ACS/ISE server.
2. He's just a man in the middle of the ADC, you will always need an AAA server: radius or Ganymede (see # 1).
-
What is the new Cisco context directory Agent?
Hello world.
I noticed on the ASA software download page the new content Agent directory (~ 800 MB). I could not find the release notes or other references of a Google search.
What is it?
A
Agent directory context is the successor to agent AD product. It provides similar features buit comes with the Linux distribution and has a GUI based interface. You reason that the link you gave there is no posted documentation. You'll have to dig around
The product AD Agent release notes are at: http://www.cisco.com/en/US/docs/security/ibf/release_notes/ibf10_rn.html
-
Hello
I have Windows 7 Ultimate 64-bit.
I downloaded the installer from the Windows Update Agent to obtain the latest Windows Update Agent. (I now c:\windows\system32\wuapi.dll version 7.3). I got the installer of http://support.microsoft.com/kb/949104. (http://download.windowsupdate.com/windowsupdate/redist/standalone/7.4.7600.226/WindowsUpdateAgent30-x64.exe)
When I run the installer obtained above, I get the following error:
"windows update error unrecoverable Setup agent has met.
This installer is not compatible with Windows 7?
Thank you.
Try to do a Reset with the Fix It (aggressive mode) here: http://support.microsoft.com/kb/971058
Run you Win7 64-bit, or is this a brand new computer?
What application or antivirus security suite is installed and your current subscription? What anti-spyware (other than Defender) applications? What third-party firewall (if applicable)?
A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
error when starting agent planner3.0 in connection server5.2 mode
I'm now deploy see 3.0 BOF Horizon view 5.2 planner, planner is downloaded from site(Viewplanner-3.0.0.0-1174010_OVF10.ova) web internal version, but will produce an error when start agent view server5.2 online scheduler,.
Traceback (most recent call last): File "c:\python26\lib\site-packages\win32\lib\win32serviceutil.py", line 806, in SvcRun self. SvcDoRun() file "d:\build\ob\bora-1174010\performance\viewplanner\ViewAgent\Package\C\serviceagent.py", line 73, SvcDoRun, file 'd:\build\ob\bora-1174010\performance\viewplanner\ViewAgent\Package\C\twisted_interface.py', line 39, in listening file "d:\build\ob\bora-1174010\performance\viewplanner\ViewAgent\Package\C\listener.py", line 36, in __init__ file 'd:\build\ob\bora-1174010\performance\viewplanner\ViewAgent\Package\C\listener.py', line 58, in readServerInfo IOError : (2, "No. such file or directory ', 'C:\\IP.txt')
I found there is no IP.txt file in C:\ and then manually create, add content:
HARNESSIP = 10.189.112.133
VIEWIP = 10.189.112.132
LOGIN = administrator
PASSWORD = ProArp13 #.
Domain = cqmccloud.com
but restart the agent service, remain of this error takes place, any help? Thank you!
PS: (2, ' No such file or directory ', 'C:\\IP.txt'), perhaps needs c:\IP.txt, not C:\\IP.txt.
Henry
This file is put in the package during the installation of the harness. If you skipped this step, it is likely that the IP.txt file was not in the packages of the agent.
-
Error 2732 Directory Manager not no reprogramming
has received an error message "error 2732 Directory Manager not no initialization" which attempted to install a speedlink driver package meant for 64-bit operating system. Any solution please
Hi Siri,
It seems that the software that tries to install on your Windows computer is not compatible with Windows 8. As referring to the Pilot of Speedlink for 64-bit operating systems (http://www.gnresound.com/professionals/fitting/SpeedlinkDriverfor64bitOS), it was only available for Windows 7 and Windows Vistadownload links.So get this program running on your computer that Windows 8 , you can try to install this program in compatibility mode with Windows 7 or Windows Vista.To change the settings for compatibility for this program, you can follow the steps on: make the programs more compatible with this version of Windows.
http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows
Let us know if this helps you solve the problem.
If you face problems more when working with Windows Mail on the Microsoft Community Forum. -
How to install Win XP on PC with intel i3 processoe running win7
HelloI'm working with a legacy system. My programs to work with Windows XP and more excellent only.Now, one day I can not PC with Windows XP we have windows 7 to house high-end system running on the desktop computer intel i3 processor.I am trying to install windows XP Professional. Installation stops with error "0x0000007b".The new PC with SATA HDD and CD ROM, I was told that windows XP Setup has no support for SATA drives, at the same time if I want to install the drivers, that it seems that for the floppy drive. Thus, it is difficult to install the drives.Also when I spoke to Dell Tech support person, he said I can't install Windows XP on the Intel i3 processor. I don't think, but I will this differ from expert.Can someone help?Hi Steve,.
You can follow this link & check if the problem persists:
Error message "STOP 0x0000007B" when you restart your Windows XP-based computer
Reference: Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XPIf the problem persists, please ask your question in the TechNet forums for assistance.
Hope the helps of information.
-
I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?
Hello
1. at what stage of the installation, the computer crashes?
2. what operating system was installed on your computer prior to this?
If you have the similar problem as mentioned in these links, you can follow these links and check if the problem persists:
Windows XP Setup stops responding (hangs) during the "Preparing Installation" phase
Windows XP does not meet the Message "Setup starts Windows XP"
Hope the helps of information.
-
Error - the Directory Service is currently unavailable for printers in Windows XP.
Original title: "the Directory Service is currently unavailable.
Help!
There isn't too much information on this from what I see.
How to fix error 'The Directory Service is currently unavailable' on a local network by clicking Find > for printers
It is not related, as I connected with my profile and it's the same mistake to profile.
Hello
Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:
http://social.technet.Microsoft.com/forums/en-us/categories/
Hope the helps of information.
-
Failed to initialize the installation program. Error 110. On Windows XP.
Whenever I try to install LV6.1 or LV6.1 DSC Run-Time system, on my Windows XP machine, I always get the following error message:
Failed to initialize the installation program. Error 110.
I think it has something to do with the MSI or "Windows Installer". I tried to uninstall all of THE products of National Instruments, but it did not help. Any ideas?
Hello. Thank you. I tried, but in fact, it did not help. However, after doing a little research on our, I found a solution by following these steps:
1. reboot Windows XP in Safe Mode
2. double-click on the Setup program to start the installation process
3 cancel the installation process after it starts
4. restart windows in normal modeNow, all my applications of MSI with setup.exe work correctly! Quite strange. Just for the record: this problem was not due to a Virus protection program (as all assumed first that many people) and it kept me from running applications (MSI?) of ANY installer from a CD.
-
iTunes error Installation 7 (Windows error 1114)
Toshiba Portege R500Vista WindowsI tried yesterday installed the new iTunes 11 update, and given that drive almost full C (common with Vista users), I changed the location of the application of drive E. I have kept getting error messages whenever I opened the application, and/or connected my iPhone to the laptop!Tried to uninstall, as difficult, when finally finished, I downloaded it again on drive C by default, after the release of memory for a $30 application: (.)
At the launch, I got this error message "error Installation 7 (Windows error 1114) iTunes.I got this message when trying to uninstall "Windows Installer error opening installation log files. Verify that the specified log file location exists and is writable.Could someone please.Thank youHaniHello
Uninstall everything according to the instructions from Apple:
«Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»
http://support.Apple.com/kb/HT1923
It is also the same list of what to remove what is in the link above from Apple:
http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm
Or try this program to remove it:
http://www.revouninstaller.com/revo_uninstaller_free_download.html
Then, download and save the iTunes on the desktop > then right click > select run as administrator to install.
"Resolution of problems with iTunes for Windows Update"
https://discussions.Apple.com/docs/doc-6562
If the advice already given does not, please contact Apple for assistance.
"Not to install iTunes or QuickTime for Windows"
http://support.Apple.com/kb/HT1926
"iTunes support-how to use iTunes.
http://www.Apple.com/support/iTunes/
"Contact iTunes Support.
http://www.Apple.com/support/iTunes/contact/
Or ask in the community Apple iTunes:
https://discussions.Apple.com/community/iTunes
See you soon.
-
Installation / product - key error 25004 (this product key can be applied to the computer, due to previous entries of product key) and 1073422306 system error.
You try to install Office or Windows product? Most of the time, this error 1073422306 is during the installation of Office.
Please look at the following thread to see if it helps.
http://answers.Microsoft.com/en-us/Office/Forum/Office_2007-office_install/Office-2007-installation-gives-error-25004/6751fcef-F955-4a69-a8af-21444b6f5aa2Please reply back and let us know if this can help.
Thank you
-
Original title: trouble installing the drivers for my printer.
Hello
I am trying to install an EPSON L110 and eveytime I try to run the CD, it appears this error message.
Windows could not determine the language to use for the installation: CODE of ERROR: 0x80004005.
I have windows 7 32 bit OS. What I'm doing. A quick response will be very useful.
TKS
Gerard
Hi, Germain,.
This problem could occur due to corrupted files. We will try to download and install the latest printer driver on the site of the manufacturer of the printer. Check if it helps.
See the articles for more information.
Find and install printer drivers in Windows 7
Hope this information helps. Answer the post with an up-to-date issue report to help you further.
-
Windows could not create an installation folder. Error code: 0x80070005
I bought Windows 7 Ultimate and tried to install it. I hit "custom" install because I wanted to start over completely and got this error message.
Try these suggestions:
Error 0 x 80070005 occurs if the upgrade doesn't have permission to the folder writecertain. Try the following steps:
Reset permissions
============
1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:
2. go to your desktop and double-click on the downloaded file.
3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.
4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
5. copy the following commands, and then paste them into the opened Notepad window:
off @echo
Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
Subinacl % lecteur_systeme % /subdirectories / Grant = system = f
@Echo =========================
Completed @Echo.
@Echo =========================
@pause
6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.
7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".
8. you will see a window of type BACK treatment.
NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."
If the same thing happens, move to the next step.
Run the upgrade by using the built-in Administrator
================================
1. click the button start-> all programs-> Accessories.
2. right click on command prompt and select "run as Administrator".
3. click on continue when user account control window appears.
4 copy the following command and press ENTER:
NET user administrator / Active: Yes
5 restart the computer and then log on the computer of this administrator account.
6. run the upgrade to windows 7.
Error code 0 x 80070005 usually indicates that you don't have enough privileges or the operation is blocked. I know, some programs (Boot Camp on a Mac PC, etc.) is not compatible with Windows 7, if you have installed these programs on the computer, you may not be able to perform the upgrade. You should uninstall these programs before upgrading. In addition, such a question may be related to UAC, I recommend you turn off UAC in Windows Vista, if you have installed security software, try uninstalling the security application as well.
BTW, for your references, I found similar questions:
Windows could not create a required installation folder. Error code: 0x80070005
"Cannot create file" error when you try to install Windows 7
Error 0 x 80070005 when upgrading to windows 7 from vista
See also:
CREDIT: Dale Qiao Microsoft, host and cdobbs
-
I tried to run the .NET framework. All files are downloaded, but finally the installation failed with error code: (0x80070005)
NET FRAMEWORK 4 fails installation
1) download setup of .net 4 by http://www.microsoft.com/download/en/details.aspx?id=17718
2) double-click the downloaded file to start the installation
Maybe you are looking for
-
Hi, I can't connect to a website I get "error could not connect", this is the only site that I have trouble withIt's Academyofhomebusiness
-
DEXT: French keyboard and accent...?
Hello I have a bought in France with Orange mobile DEXT... I can't find any solution to get with the real keyboard all focus... and we use a lot in France... nothing in the manual on this subject... Thanks for your help... ;-)
-
How can I enable SLI mode my dual graphics GT750M on the mobile Y510p. GPU - Z says THAT SLI is disabled. Can't seem to find a place to put on the Nvidia Control Panel either. Poster 2 GT750m Device Manager works correctly.
-
DIAdem 2010 not registered for COM Win7/64
Hello my application creates an instance of tiara... New DIAdem.TOCommand... On Win7/32 it runs as expected. On Win7/64, I get the exception REGDB_E_CLASSNOTREG DIAdem is already running, the new DIAdem.TOCommand throws the same exception. Now when I
-
That grey area, it's stealing a precious space in my area of icon and I still have to find a solution. Any help is VERY appreciated! Thank you! Larry P.S. - Dell E521 Windows XP Pro