Installation of FMS on Fedora 11 (64-bit)

Similar Questions

• Cannot run bbndk.sh in Fedora 17-64 bit

  Hi all, I am a newcommer in BlackBerry 10. Today, I download the package SDK 10 installer-bbndk-BB10_0_06-linux-543-201207171612-201208070655.bin of the https://developer.blackberry.com/native/beta/download site and install it.

  After installing, I try to run the bbndk.sh file, but that's not all is run.

  My PC is DELL Inspiron 14R,

  OS: Fedora 17-64 bit (use LXDE)

  Could you please help me open IDE or compiling in this case because it doesn't error or comment out so I don't know how to fix them.

  

  Hello

  Linux is not supported at the moment, the virtual machine would be your best bet.

  Good luck!

  Martin

• Fedora 18 (64-bit) do not start on VMware 8

  Hi all

  I have the following problem:

  I installed Fedora 18 (64-bit) on my VMware Workstation 8.0.1 build 528992, but I get the following error:

  

  then the following:

  

  Note that I activate the VT on my server BIOS and I disable execution of 'confidence' but still having the same error.

  After making changes in BIOS launched you stop the system or you just did a reboot hot?  If the latter then perform a boot cold to ensure the change of VT - x in the BIOS takes effect.

• Installation of VMWare in Fedora tools

  Hello!

  I just installed Fedora 12 on my Mac under Fusion, and the process was pretty smooth. However, I'm not sure how to install VMWare Tools in Fedora. I am a complete newbie of Fedora, so I don't know exactly how to install it.

  Thank you!

  Nathan

  You must install the tools as "root".   During the installation process of

  Fedora, you need to enter a password for the "root".  So, to install:

  -In the terminal, navigate in vmware-tools-dist as you did before.

  -type the following: su

  -Press on back

  -you will ask you for the password, enter the root password

  on this line

  -you will be connected to the Terminal Server session as root

  You can then saisir./vmware-install.pl

  -You can accept all settings by default when prompted and all must be

  Well.

  -Then close the Terminal Server session.

  -Then, log out and log insert it again or restart for the changes to take effect.

  Usually, I reboot just to make sure everything is loaded correctly.

  Now, if you forgot your password to the root, your basically watered since

  you even to create a sudoers.

• Installation of VMWare in Fedora 17 (guest operating system) tools

  Hi all

  I'm trying to install VMWare tools in Fedora 17 and receive an error message

  The path "" is not a valid path to the core of 3.3.4 - 5.fc17.x86_64 headers.

  I have installed gcc, binutils, and brand.

  Kernel-heads are at the same level. However, I still get the above error.

  Any help would be appreciated.

  Thank you

  Here are the details

  ---------------

  Looking for a CCG...
  Detected binary of the GCC to "/ bin/gcc".
  The path ' / bin/gcc "seems to be a valid path to the GCC binary.
  You want to change it? [None]

  Looking for a valid kernel header path...
  The path "" is not a valid path to the core of 3.3.4 - 5.fc17.x86_64 headers.
  You want to change it? [Yes] ^ C
  The execution is canceled.

  [bpmdev@fedora17v1 3.3.4 - 5.fc17.x86_64] $ uname - r
  3.3.4 - 5.fc17.x86_64 Linux

  [bpmdev@fedora17v1 3.3.4 - 5.fc17.x86_64] $ list of installed yum | grep 'core'
  kernel.x86_64 3.3.4 - 5.fc17 @koji-override-0 / $ releasever
  kernel - headers.x86_64 3.3.4 - 5.fc17 @fedora

  
  [bpmdev@fedora17v1 3.3.4 - 5.fc17.x86_64] $ sudo yum install kernel-PAE kernel-PAE-devel
  Loaded extensions: last, presto, refresh-packagekit
  No kernel-PAE package available.
  No available kernel-PAE-devel package.
  Error: Nothing to do
  [bpmdev@fedora17v1 3.3.4 - 5.fc17.x86_64] $

  First... you seem to tell the difference between x86_64 and i686 iso image of Fedora. I couldn't find an i686 image. Of course, I must be on 64 bit system. If I'm wrong, then please direct me in the right direction.

  If you want to use the x86_64 image that's good, assuming that your system supports.  I just used the i686 for example image in the scenario either will not lead the same way.  Then the essence is in the error message that it reported a string zero to locate the core of 3.3.4 - 5.fc17.x86_64 by default and this means that the necessary header files for the kernel were not on the system.  I introduced him as I did so we would understand that if they made a default installation and no upgrade and is not used "-"uname - r"" is then added to "kernel-devel" with yum install the last header of kernel files not by default and would always be a null string error message.

  Secondly, I've upgraded to the latest version of the kernel, and I download these errors right now. Should I go down.

  The latest kernel, I do not think that it is officially supported by VMware again and tools VMware would need to be patched with the third-party patch before installing with the kernels more later then the default kernel.  So you need to apply one of the hotfixes that are here on the web or use a core of support for VMware, it's your choice.

  BTW, it is quite common with the Linux distro once one updated the default kernel will generally use one of the third party patches for VMware Tools install properly and you should be able to find it in the forums and via Google.  In General, VMware is and has always been extremely slow in support of new kernels, where the need to use third-party patches for VMware Tools to properly install on any Linux distro and kernel which is not yet officially supported!

• Inconsistent start in VMware 6.5.1 on Fedora 10 64-bit

  Hello.  I am running VMware Workstation 6.5.1 on a 64-bit Fedora 10 installation.

  I struggle from VMware.  I did a quick launch icon to run "/ usr/bin/vmware", and I have to click on something like 10 times in the order so he could get.  However, he just finally upward.  Looks like a strange condition for me.  Here are the error messages that I get to the course at startup failed.  If anyone else has experienced this?

  LDD: you leave with unknown exit code (132)

  LDD: you leave with unknown exit code (139)

  / usr/lib/VMware/bin/VMware: error while loading shared libraries: libgnomecanvasmm - 2.6.so.1: cannot open shared object file: no such file or directory

  / usr/lib/VMware/bin/VMware-modconfig: error while loading shared libraries: libview.so.2: cannot open shared object file: no such file or directory

  Sometimes, it will be a combination of the above.

  All my modules are compiled and correctly loaded.  I have no errors when you do "/etc/init.d/vmware restart".  This works perfectly.  In the output of lsmod, I see these 4 modules running: vmnet, vmblock, vmci, vmmon.  So I know this isn't a problem.

  It is strange that I get these errors, loading, although only.  All libraries are in effect on the system.  The script/usr/bin/vmware is supposed to find these libraries, is it not?

  And for the record, I followed all the recommendations I knew get VMware Workstation installed on Fedora 10.  Here is a summary, please let me know if I forgot something:

  (1) in etc/modprobe.conf.d, create a new file.  Add the 3 lines to this file: 'blacklist kvm', 'black kvm_intel list', 'blacklist kvm_amd. "  Reset.  If you already have these modules loaded, simply unloading with "rmmod" is not good enough.  You must restart.

  (2) remove the kvm userspace as well, with "yum erase kvm.

  (3) install the compatibility library, with "yum install compat-expat1.  VMware uses a slightly older version of the libexpat library and it will fail to load unless you manually install earlier version for compatibility.

  (4) move the directory to/usr/lib/vmware/modules/binary pre-existing from the road.  Run 'vmware-modconfig - console - install-all ".  This will rebuild your modules.  I had no errors at all during this operation.  If you get errors, you does not have enough features development during installation of Fedora 10.

  (5) fix the bug of keyboard, or you won't be able to tap the arrows of your reliable keyboard on the computers of your guests.  Once you get up VMware and running, close all open Windows VMware and edit your $HOME/.vmware/preferences file.  Add this line to the bottom: xkeymap.nokeycodeMap = 'TRUE '.

  Thank you!

  Josh

  At least on my machine, the problem is indeed due to the bug in Fedora 488449.

  There is a workaround solution indicated in the #15 comment:

  https://Bugzilla.redhat.com/show_bug.cgi?id=488449#c15

  When I modify my script/usr/bin/ldd using the workaround, vmware lance constantly. Hope that helps!

• New installation of Windows 7 Home Premium 64 bit on Sony VAIO key OEM

  Hi all

  I recently bought a Sony VAIO VPCEB27FA, who is essentially a Middle East of the EB series model. The PC is literally loaded with all sorts of versions possible assessment and bloatware and it absolutely killed any computing experience. Windows 7 starts at more than 3 minutes. Yes, I timed it actually to see how long it takes for Windows load up before you can start actually using my computer. My old gateway desktop which is in reality a P4 and has Windows 7 installed on it opens in less than 45 seconds and is good to go. So I definitely do a clean install on my laptop to clean up all the UNWANTED horrible. But can I use the Windows 7 key on the back of my laptop after a clean install? I go to download the English version of Windows 7 Home Premium 64 bit of Digital River. Currently, my laptop has the same version that is the English version of Windows 7 Home Premium 64 - bit as mentioned on this page from Sony

  http://www.Sony-Asia.com/product/vpceb27fa

  Thank you

  PS: - You can see for yourself on the page of Sony in the specifications of the software INCLUDED, how trialware and bloatware been installed by Sony on this machine. I hate Sony for this and I will never buy a VAIO again in my life.

  There is no need to separately download OEM or retail of Windows 7 RTM installation DVD ISO, as the release of Windows 7 installation can be easily converted using simply the correct product key (for example OEM_SLP product key can convert an installation of Windows 7 at retail in OEM version), as issued by the OEM product keys has a different basis of the retail product key. For ISO of DVD images, the only difference between a Windows 7 RTM retail ISO and ISO of OEM of Windows 7 RTM is in position of EI.cfg file [channel], which specifies the sales channel to retail or OEM.

• Re-installation of Windows 7 Home Premium 64 bit on laptop it was installed before

  I have a Toshiba laptop (model A665-S6050) that I fixed. He had a broken screen and hard drive was dead. I tried to install Windows 7 Home Premium 64 bit from a disc that came with another computer and using the product key on the bottom of the laptop. It did not work. Is there a good way to do a fresh install on this laptop, and I need a specific installation DVD? Where can I get this, and what is the procedure of re - install Windows 7 and activate it?

  Hello

  The only legal Windows 7 download available is now Microsoft, as Microsoft has stopped DigitalRiver Windows 7 ISO downloads.

  http://www.Microsoft.com/en-us/software-recovery

  But Microsoft only provides these downloads for Windows 7 keys to selling product at retail, not preinstalled OEM product keys (Dell, HP, etc.).

  As you have a license of preinstalled OEM (Toshiba), contact the manufacturer of your computer to order recovery media that they need to provide for a fee, If they are still available...

  Or you can also borrow the same exact detail Windows 7 Edition DVD and use your product key to reinstall.

  The COA sticker with the product key is either or in the battery compartment on the underside of the laptop.

  With a desktop computer, it's on the side, the back or the top of the computer case.

  

  See you soon.

• Failed installation of Bluetooth after conversion from 32 bit to 64 bit

  Recently, I converted my laptop ACER from 32-bit to 64-bit. Since then, I am unable to install bluetoothdrivers on my system and both 32 & 64-bit versions of the Installer failed, both the performance of the installation with "your system is not compatible for this product.  Kindly let me know if any solution for this.

  The product details are as under:

  OS Windows 7 Ultimate (32 bit to 64 bit conversion).

  ASPIRE E1 - 531

  6 GB OF RAM

  320 GB HD

  You cannot convert a version of bit of victory, it requires a clean installation of the specific bits version of victory.

  All system drivers would be obtained from Acer support.

  If you get a "msg is not compatible" when you install the correct version driver of ILO, either you are using the wrong driver got on the wrong site or there is a problem with your installation of win.

  I just clean installed win7 64-bit on the same laptop model, and got drivers from Acer support, everything went without a hitch - other hours of updates to windows that followed.

  (Remember there are 3 or 4 different Bluetooth drivers on Acer support)

• Installation of Win 7 Home Premium 64-bit

  I have a HP Pavilion g7-2069wm Notebook PC. It came with Windows 7 Home Premium 64-bit.  My hard drive fried and everything that came with the computer were the rescue disks.  How can I get the complete installation for this system discs so that I can re - install Windows. I tried to download an iso, but the size is prohibitive, as I have a slow internet connection.  Of course, I could use some help.  Thank you.

  HP Compaq Custom recovery discs
  Contact Technical Support: http://www8.hp.com/us/en/contact-hp/contact.html

  Recover the system after the hard is replaced
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01950054&tmp_task=setupCategory&LC=en&DLC=en&cc=us&lang=en&product=4107708

  J W Stuart: http://www.pagestart.com

• installation of HP 1022 win 7-64 bit

  I am unable to get the installation package to exceed the plugin cable

  I replaced the printer cable, but the program does not recognize the printer for installation

  My operating system is win 7 64 bit on a computer laptop dell i5 at dock

  all ideas

  I was able to put the generic program on but there not always recognize it then I found a local print driver for a hp 1020 and installed itt against windows 7 and it works perfectly

  Since it is a basic laserjet b & w

  Thanks for your help with you that I couldn't be led to a difficulty

• W7 Pro came with two installs. I want to install 64-bit, but this program does not run. I have processor EM64T and have installed the W7 32 bit, but want to install 64-bit

  I had XP and would like to take my EM64T processor and memory expansion capability. I bought W7 professional online and could not install the 64-bit version. I installed the 32-bit version, but want to install the 64-bit. I checked my ability of 64-bit. The error is that the installation is a 64-bit program. See below

  "The version of this file is not useful with the version of Windows that you are running. Check of your computer's system information to see whether you need a X 86 (32-bit) or x 64 (64-bit) version of the program and then contact the software publisher. »

  Hi Larry_437,

  Please take a look at the thread similar here with instructions on the upgrade of Windows 7 32 bit to 64 bit.

  You can also take a look at this article as well:

  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  I hope this helps!

• For installation on the Windows 7 Professional 32 Bit

  I have a laptop Acer Aspire 5733. I'm from the India. My laptop was containing the Windows 7 Pro 32 Bit system. Yesterday in the morning when I tried to boot up the laptop, it showed me that it did not contain the operating system. That I tried to install the OS via the hard disk.

  Now when I tried first install the C: (system disk) he stuffed me error that Setup could not create a new partition system or locate an old existing system.
  See the logfile of installation for more information.

  Now when again when I had seen a detail for the same. It gave me an error like that.
  Windows cannot be installed to this disk. Hardware may not support booting to this disk. Make sure that the drive controller is enabled in the computer's BIOS menu.
  Windows cannot be installed to this disk. The disk may not soon. If there is another hard drive, install to a different location.

  Please help me as fast as you can. Its really urgent for me to use my laptop.

  I even formatted my whole hard drive and also tried to use the disk drivers is SATA AHCI x 86

  Looks like that is the hard drive is faulty, or the controller for the hard drive to the motherboard has failed.

  You should have some computer hardware experience look.

• Network Installation unsuccessful Photosmart 6510 Windows 7 64 bit

  Photosmart HP 6510

  Windows 7 64 bit

  Unsuccessful network installation

  No Antivirus or 3rd party firewall.

  Windows Firewall disabled

  I have the printer last year and he didn't want to install via USB. He said peripheral usb not recognized. So I thought it was the cable and I don't have a different cable at the time I decided I would install it when I get a wireless router.

  Now I have a wireless router last week and it still won't install on my computer. The printer/PC are connected to the same network and the SSID is unique. The computer can see the printer, the printer is connected to the internet, and he did the updates wireless. He used to install I went to the resolution of the problems that it installs on your desktop and worked my way through all the solutions and it still woudn't work. Now what? I'm at the end of my home...

  General

  Network status: Loan

  Active connection type: Wireless

  802.11 wireless

  Status: Connected

  Mode of communications: Infrastructure

  Of signal quality (1-5): 5

  Authentication type: WPA - SPK

  Encryption: Auto (AES or TKIP)

  Configuration source: Manual

  Port 9100

  Status: Activated

  Hello

  Status: Activated

  SLP

  Status: Activated

  Microsoft Web Services

  WS discovery: Activated

  WS Print: Activated

  PPI

  Status: Activated

  Something wrong?   I would recommend a complete uninstall of the HP - use HP software uninstalling the software in your programs folder.

  Restart your PC.

  Download the latest version of the software for your printer from the "Support & drivers" link at the top of this page.

• Failed installing Photoshop Elements: Installer does not install on a 64-bit operating system

  Bought 13 elements Photoshop from Adobe by Amazon for download.  He said one of the requirements is a 64-bit operating system. Very well. Downloaded correctly. I have a Dell Inspiron 15 with 64-bit processor. Initialized Adobe install, put n serial, you tap on install.  Failed installation: error msg - installer does not support installation on a 64-bit system. Please download the 64-bit version of Photoshop Elements. Help.

  Download the 64-bit Installer

  Downloads available:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 5.6| 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".