Network Installation unsuccessful Photosmart 6510 Windows 7 64 bit

Similar Questions

• Network Installation unsuccessful Photosmart 6510 Windows XP

  Wireless printer: HP Photosmart 6510 B211a

  Router: Netgear WNDR3700, 802.11 g, WPA2-PSK

  Windows XP

  Photosmart 6510 series driver and SW ver 24.2.0

  When I try to install the driver, the Setup program reports "installing network without success." The installation program detects the printer, but does not end.

  The printer has network connection. It responds to ping, it works with HP ePrint, it displays Web pages on its IP 192.168.1.2. Test report wireless says that everything is OK.

  I uninstalled and reinstalled several times without success. Always the same problem "network unsuccessful installation.

  I'm looking forward to advice on how to solve the problem.

  I rebooted the router and re-installed the driver. Network installation has always fails. So I ran the Print utility and doctor Scan. Printing and scanning doctor found that the driver was not installed and advised me to download the driver from the HP site package Support & drivers.

  I downloaded and installed by using the downloaded driver package. The installation was interrupted by a Win32 exception:

  

  I installed the driver once more (without uninstalling), now with SUCCESS! My Photosmart 6510 is now running.

  Thank you!

• Photosmart 6510 - Windows 7 - I need to the Port ID to set up my modem for wireless connection

  Printer: PhotoSmart 6510

  Operating systems: Windows 7

  Modem: Huwawei E586

  The printer configured easily to the modem for wireless connection.

  The problem I have is that my laptop cannot see the IP address of the printer when I try to configure a wireless connection.

  I am trying to add the IP address of the printer to the virtual server from the modem list.

  What is the PORT ID required by the printer?

  This information is not in the installation notes.

  I found it. It is Port 9100

• HP Photosmart 7260, Windows 7 64-bit, error when changing the size of paper in printing preferences

  Driver HP Photosmart 7200 Series installed (61.53.25.9) for printer HP Photosmart 7260 on HP ProBook 4270 s running the Windows 7 64-bit operating system. I have a few packs of paper HP Everyday glossy 4 x 6 (without tab) to print photos. When you attempt to change the format of 'Photo 4 x 6' paper on the printing preferences > tab paper quality, Windows Explorer crashes. Please help me solve this problem. Thank you.

  

  Indeed, I can reproduce the exact behavior even with Windows 7 64 bit.

  Add another driver that should solve problem withut wasting any use of the feature:

  Click on add printer and select the USB port.

  While the list of printers, click Windows Update and leave a few minutes up to that list once again displayed.

  Under HP, select HP Deskjet 6980 and cmplete configuration.

  Now try printing using the driver 6980.

  Please let me know of any changes,

  Shlomi

• Installation of OBIEE on Windows 7 64-bit OS

  Hi all
  
  I want to install Oracle Business Intelligence 10.1.3.4.0 on Windows 7 64 - bit OS can you suggest me the things I need to consider in this area.
  like: -.
  (a) JDK 32/64-bit.
  (b) for Oracle 32/64 bit ODBC drivers.
  the driver of any other special considerations that I need on the 64-bit operating system.
  
  I'm curious about it and im going to install on this weekend.
  and if possible can I other links where I can get useful information related to this.
  
  Help, please.
  
  -Jagdeep Singh

  Hi singh,.

  Go through this link for installation on windows 7 [http://obieeblog.wordpress.com/2009/01/12/obiee-on-windows-7-beta-32-bits/]

  Follow the same for 64 bit on 32-bit configuration. It would be easy.

  Best wishes
  Murielle.

• Former installation problem program under Windows 7 64-bit

  I installed the 64-bit Windows 7, but I need to run some old software, for which I have a CD. (Actually I think it is 16-bit. Well, I know it's a dinosaur, but this is my situation.) Naturally, setup.exe is also 16-bit (perhaps 32 bits, but I doubt it). There is a shortcut to setup.exe on my desk, by double-clicking on it, I get this message:

  The version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher.

  He ran very well under Windows XP 32-bit, and I don't remember doing something special for 16 bit then; I know that much. (I'm sure I'd remember something special like that, if I had). Microsoft program compatibility issues resolution isn't going anywhere.

  How do I enter a 32-bit emulator environment and double-click the shortcut (or setup.exe itself) from there?

  Separated from the:

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/64-bit-and-32-bit/c2d75382-DB03-4674-B62D-9ca8a0331b34

  64 bit W7 run 16-bit programs.

  32-bit W7 can run older 16-bit programs (a little) more

  See http://windows.microsoft.com/en-us/windows/32-bit-and-64-bit-windows#1TC=windows-7 and http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/how-can-i-run-16-bit-programs-in-windows-7-64-bit/22b921f5-0b71-4ba1-8567-2bb86a1b604e for additional information.

  If you have an eligible version of W7, you may be able to get the program running in XPMode or install Virtual Box and if you run an old copy of XP or W7 32-bit (assuming it's free with a free license, etc.) in that.

  Or maybe make a system dual-boot W732 (or XP) and W764.

  If it is a DOS program rather than an old Windows program, it can run into something like DOSBOX

• Installation of VMWARE on Windows 7 64 BIT

  Hello

  I worked with VirtualBox and Hyper-V for the last two months. I am a newbie in terms of VMWARE, but I decided to give it a shot, so I downloaded vmware server 2.0. I can install it on Windows 7 64 bit? Please let me know if there are problems. Thank you.

  Hello

  You can be very sure to install any vmware product in your pc. It does not break anything in your pc

  When I talk about issues, I was talking about issues on the post itself or the virtual machines running on my computer. Not in the Windows system or software installed on it.

  Please, don't forget to mark any response that helps you as useful or correct

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. ¡¡MUCHAS gracias!

  Virtually noob blog

• HP Photosmart C5180 - Windows 7 64 bit - network - device detected but FAIL to install.

  Hello

  I have a Photosmart C5180, connected with an ethernet (not usb) cable.

  It's great to work with all the computers in the House (vista and xp).

  But my new computer, a 64-bit windows operating system 7, impossible to install the drivers:

  The drivers are now installed, but the step 'add a device' does not work correctly.

  After the analysis of network, the printer is displayed:

  

  Then I click Next, to "network analysis":

  

  OK, next step is "installation." Before the picture, it says 'detected printer"(french).

  

  And a few seconds after it fails:

  

  Grrrr wtf?

  Thanks for the help!

  I had problems to install the HP software. When I installed the full package I get pop ups and error messages. So I did a complete reinstall (I have now if he really had to do I had other issues). After that I just installed the drivers and no extras and it works very well. I'm also hooked using the ethernet connection. A point even before the reinstall if I come you drivers and no additional software. I can still scan using Windows Fax and Scan. I probably will not add extra software until there is another version.

• HP Photosmart 2710: WIndows 7 32-bit drivers for HP Photosmart 2710

  Need to find Windows 7 drivers for HP Photosmart 2710 all-in-one printer; No luck online at all.

  Hi @Rocketguy2,
  
  I'm glad to hear that your problem is solved and everything works fine now.
  
  Good day!

• This is the 1935 error once again, the installation of Norton Ghost Windows 7 64 bit

  Hi, I say 'yet' because it's a frequently asked question, unfortunately with no viable solutions.

  I installed Norton Ghost 15 on this machine 3 years ago. No problems. Today, when you pull up the ghost, she suddenly want to run the MSI installer for some reason any and then complains about something. Unfortunately I got a copy of the error. I just uninstalled completely, using the Symantec removal tool.

  When you try to install Norton Ghost again, I get this:

  

  I unchecked .net framework 3.5 in Windows features, rebooted, checked again and rebooted. I installed Microsoft C++ 2005 and 2008 Redistributable. This I did because another post suggested to do this.

  I also activated the journal feature detailed in the Windows installation program and get a huge file full of data, which tell me what I can use. Yes, something went wrong shot, but in this (these) file (s) there is no special section that stands out in a way that tells me that what in fact was wrong.

  Now, is say, not possible to obtain information in plain language? Saying that the Assembly is absent, this file is missing and so on. Because obviously something is not here that should be there, who were 3 years ago, when Norton Ghost installation went flawless.

  Or is it something else? "An error occurred during the installation of assembly component", which component? And what is normally the cause of this problem, which will normally not when an assembly component cannot be installed?

  
  My question basically goes like this:

  How can I know what is the real error? Assembly that is missing, have what is missing? The blind approach isn't trying for me, there must be a scientific way of this approach!

  Any help appreciated!

  -Ingvar

  OK, I found the solution:

  Error 1935 resolved

  Big - just install Ghost until the error message. Do NOT click OK, instead, use task or much better, Manager procedure such as SysInternals Monitor to kill all processes of msi windows installer and everything that has nothing to do with Norton.

  Ghost 15 is now installed and you can register and use it.

  Problem is, there is a current cancellation, who will run the next time you want to install (all) application.

  Delete these registry keys:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\InProgress

  and

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\InProgress\Rollback

  Now, everything should be good, at least it looks so here!

  Detective Conan.

  -Ingvar

• Problem with installation of iTunes with Windows 7 64 bit

  I'm just a helpless user.

  All of a sudden cannot re - install iTunes on Win 7 64 PC

  Get this iTunes error message:

  An error occurred during the installation of assembly Microsoft VC80. CRT. Type = "win32". version etc etc.

  Known issue?

  Virus?

  Difficulty?

  Need more of the message?

  Thank you very much!

  Mike

  I lost hours and then abandoned.

  Then a miracle happened.

  iTunes is back on my Windows 7 computer in the form of iTunes 12.1.2! First installed; No problem.

  Moral *: If you have a problem, do nothing until the situation settles.

  (* probably does not apply universally).

  #happyending

• CS4 Web Premium Installation fails - Pemium Home Windows 7 64 bit

  I have a new computer running windows 7 Home premium 64-bit. The first software I've tried to install was CS4 Web Premium. It cannot install after having worked for some time and apparently installed some of the parties under the now - failed to install major components such as Photoshop, Illustrator, Dreamweaver.

  I ran the following own (whatever it is calld) and tried again with the same results. Finally I just install a stand-alone version of Photoshop CS5 Photoshop is the software I use 95% of the time and I need to get some work done, while I continued to get the rest of my data/software in place.

  Now, I'm almost finished installing my software and move my data to the new computer, I would like to go back and install CS4 - especially, I don't need that Dreamweaver, Illustrator, Acrobat Pro, and Flash. What is the best way to get this installed? I'll be better off doing this installation in Compatibility Mode because it won't install in normal mode? If so, how could I do (just need to copy the contents of the installation DVD to the hard drive first?)

  Computer: Lenovo IdeaCentre K330, Intel Core i5 2300 (2.80GHz), 8 GB of DDR3 memory, 1 TB HDD, NVIDIA GeForce GT 420 (1 GB), Windows 7 Home Premium 64 - bit

  Which specific component is responsible for, it's impossible to say without seeing the Setup logs and even then it may not appear, I'm afraid. Can be anything. People don't usually comes take knowledge, because when you have already installed many programs, chances are that it is already on your system. Also, make sure your Windows Event Viewer. If this is a generic error due to a missing DLL, it may appear here...

  Mylenium

• Help installation forms 11G on Windows 7 64-bit

  I am trying to install. 64-bit, I installed Java JDK, Weblogic server generic and finally the portal, forms, reports and discoverer (11.1.1.2.0). When the installation of portal, forms, reports, and Discover arrives at step 6 of 16, it is reported: INST-07408: cannot install or configure the product on a virtual machine JAVA 32 bit on a 64-bit computer. Note that the error appears to be a complaint against a JVM, not a JDK. Does anyone have a solution?
  
  Published by: user1637605 on December 20, 2009 19:13
  
  Published by: user1637605 on December 21, 2009 03:45

  Hello

  Oracle Forms certified on Windows 7 and IE8
  I've seen this issue come several times recently so just to clarify. Oracle Forms 11.1.1.2 (which is the first patch updated 11g) is certified to run new Window7/IE8 browser clients.

  Details of the certification of customer forms can be found here:
  Link

  Sarah

• g207ax: controller network for HP 15-g207ax Windows 7 64-bit driver

  I can't find the driver for network controller for my laptop on Win 7 64 bit

  Hardware ID

  PCI\VEN_14E4 & DEV_4365 & SUBSYS_2230103C & REV_01

  PCI\VEN_14E4 & DEV_4365 & SUBSYS_2230103C

  PCI\VEN_14E4 & DEV_4365 & CC_028000

  PCI\VEN_14E4 & DEV_4365 & CC_0280

  Hello:

  You need these drivers wireless and bluetooth for this model of the wlan card.

  This package contains the Broadcom Wireless LAN driver that is required to activate the LAN adapter wireless Broadcom integrated in the laptop models running a supported operating system. This package also contains the Broadcom Wireless Utility application.

  File name: sp69014.exe

  This package contains the Broadcom bluetooth driver and software for the laptop models running a supported operating system. Broadcom Bluetooth 4.0 driver is required to activate the bluetooth 4.0 Broadcom devices and is compatible with Broadcom bluetooth 3.0 and earlier versions.

  File name: sp66402.exe

• Installation of printer on windows 7 64 bit very slow drivers

  Hello

  I tried to install printer drivers on all our systems to 64-bit windows 7 and it takes a lot of time for the drivers to install.  The time it takes to be installed varies from 5 minutes to several hours.  The latest downloaded drivers from the manufacture of the printer, but its seems to winodws 7 64-bit takes a long time to install the drivers.  Anyone have a similar question?  Any available explanation for these very slow install?  All responses will be appreciated.

  Thank you.

  Hi prowess.

  Please see the post below with a similar problem and fix possible:

  http://social.answers.Microsoft.com/forums/en/w7hardware/thread/7b6d5c8d-C73F-42BF-8744-cefacd7c45de

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think