Installation of Oracle 10 g on windows 2003 server

Similar Questions

• 11g RAC Installation fails add the instance on windows 2003 Server

  I am install 11g RAC on windows server 2003.
  Finished creating House of CRS and it looks good.
  Tried to create the database using DBCA it gives me below error. Help, please.
  
  D:\ > srvctl add instance d mgrpdb-i mgrpdb1 - n mgrpcluster-1
  PRKO-2010: error in adding instance to the node: mgrpcluster-1
  PRKR-1008: adding the instance mgrpdb1 on the mgrpcluster-1 node to the cluster database
  mgrpdb failed.
  PROC-27: error in authentication layer authentication failure [ALS error informat
  ion: category: operation [1234]: [scls_iddb_get_privgrp_id_by_name] location: [L
  [ookupAccoun] others: [LookupAccountName failed] Dep: [1332]] [1]
  
  concerning
  Musaddaq

  Salvation;

  Please check below and see its useful for your question:

  Upgrade to 10204 CRS cannot start Instance resource to aid native group 'dba' [603667.1 ID]
  PRK % error - Cause and Action required [ID 178435.1]
  Bug 3584146 - PRKR-1008 instance adding to SIR via SRVCTL [3584146.8 ID]

  It may be useful

  Respect of
  HELIOS

• LCES 2 on windows 2003 server (32-bit) with oracle db?

  Hello

  I started to read the guide "Preparation for installation LCES2. In the guide on page 12, I find not a supported configuration for Windows 2003 server, JBoss, OS 32-bit and oracle 10g / 11g database. This configuration is no longer supported?

  We currently have LCES 8.2.1.3 running on an application server jboss on a Windows 2003 Server 32 bit OS and an oracle database 10g. Must we really change to 64 bit OS?

  Any information is welcome!

  Kind regards

  Els

  In the ES2, LiveCycle memory requirements exceed the 32-bit JDK in Windows /Linux (1.2 to 1.5 GB).

• installation of Windows 2003 server on machine existing windows7

  IAM planning to install Windows 2003 server OS on the machine having windows7
  I would like to have a dual-boot setup where I can start/start any one of the
  operating system and start work
  Please note that I will not disturb existing OS i.e, windows7
  Please suggest...

  Assuming you want to install Windows Server 2003 on an empty hard disk or a partition:

  You can start the installation from the installation of Windows Server 2003 to start media. When you are done, follow the steps in this article to repair the boot sector: Windows startup is no longer after you install an earlier version of the operating system in a dual-boot configuration

  For additional tips for Windows Server, please post in Forum Windows Server.  Thank you!

  Carey Frisch

• Documentation for the Oracle 10 g on windows 2003 application server

  Hello
  
  I want to install Oracle 10 g on windows 2003 application server...
  can someone provide me with the link to the documentation to install it...
  
  
  thanx
  beautiful sethi

  Hello

  Check out these links.

  http://download.Oracle.com/docs/CD/B25221_04/GetStart.htm

  http://www.Oracle.com/technology/documentation/appserver1012.html

  Sarah

• Client Oracle for Oracle database 10g and Windows 2003 operating system...

  Hi all
  I need an Oracle Client for Oracle database 10g and Windows 2003 operating system.
  I searched www.oracle.com it there as much of products so basically that I got confused.
  Could you guide me please?

  Hello

  Here is the link: download (Oracle Database 10g Release 2 (10.2.0.1.0) customer - 10201_client_win32.zip (475,090,051 bytes) (cksum - 946434250)).

  Oracle Database 10g Release 2 (10.2.0.1.0)
  http://www.Oracle.com/technology/software/products/database/Oracle10g/htdocs/10201winsoft.html

  Kind regards
  Hussein

• E-Business Suite R12 Oracle loading sequence in Windows 2003 services

  Can someone tell me what is the sequence of loading for the following services Oracle EBS R12 in Windows 2003.
  
  (1) service Fulfillment Server oracle for SCREWS
  (2) oracle Service SCREW
  (3) service of OracleConcMgrVIS
  (4) oracle RDBMS TNS Listener
  (5) oracle ToolsTNSListener
  
  I have the problem where at startup, Windows 2003 Server Fulfillment Oracle service for SCREW trying to stop. It seems that the service is set auto start somehow. I have to wait for the service to be completely shut down and manually restart the service. But I don't know what is the reason that causes this problem
  
  Thanks for the tips.
  
  Published by: user4992799 on November 14, 2008 18:39

  Start the following services first or set to automatic:

  Oracle TNS Listener RDBMS
  Oracle service LIVE

  Other services the Manual value

  Go to your % APPL_TOP directory and click on envshell_. cmd. You can create a shortcut and place it in a more convenient location. Then % ADMIN_SCRIPTS_HOME % cd and run adstrtal.cmd apps/apps to start all your service requests after the startup of the database.

  You are having problems to start the services of applications before the opening of the database.

• Satellite A300-29N - installation of Windows 2003 server displays an error

  Hello
  Tried to install Windows 2003 Server new Toshiba A300-29N get error.
  -------------
  Search for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to ensure that it is properly configured and completed. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
  Technical information:
  Stop: 0x0000007B (0xF789E63C, 0xc0000034, 0x00000000, 0 x 0000000)
  ------------
  The one facing this problem and any updates.
  Concerning
  Samir

  Hello

  I m wondering that you want to install Windows server on a laptop...

  In any case, it is a known problem and also happens on XP and Vista. To fix this you need to use the laptop SATA driver or you change the SATA mode in the BIOS by AHCI compatible, then you don't need a driver.

  Here are some instructions that might be useful for you:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  I do not know if you will get a driver for Server 2003 but you can try the XP driver and in the worst cases, it must use compatible mode m.

  Let me give you a little advice: If you have other questions, use the forum search. You can find hundreds of discussions about this.

• Oracle xe + apex on windows home server 2003

  Hi, I need help.
  
  I set up a windows 2003 server and installed the 10.2 XE and APEX 3.2 db. I also configured the firewall to port 8080, 1521 (TCP & UDP) and 2030 (TCP & UDP).
  When I try to establish a connection as http://servername:8080/apex/f? p = 4550:10, then the answer is "cannot display the page. When run http://127.0.0.1:8080/apex/f? p = 4550:10 on the server, I get a login page of APEX
  
  FYI: I can connect to the database with SQL-Developer
  
  Edited by: WebMees NL on April 25, 2009 12:35

  Hello:

  You may need to allow "remote" access to the database of the XE. To do this log in the database using sqlplus under user "sys" and run

  exec dbms_xdb.setListenerLocalAccess (l_access-online false)

  CITY

• Windows 2003 server ASM backup

  Hello
  
  (New in ASM). I want to use ASM to manage the database on a Windows 2003 server. I looked on the information and understand I need to partition disks to raw spaces, name them, and then during the installation of Oracle, I have Oracle get all that disk space.
  
  Now, my question is: what should I use for a backup? RMAN? Export?
  
  Any ideas?
  
  Thank you
  
  VIC

  You can use FRA for RMAN backup. Create a separate FRA diskgroup and store RMAN backups, archivelogs and also flashback logs. If you are able to store your backups in the Storage Manager, you can then run RMAN backups in Storage Manager.

• How can I run a program with win xp have a restricted user account type in the title of windows 2003 Server domain controller?

  Dear all,

  I have a windows 2003 server and I have a domain controlor.

  I have win xp use in this field, the account type for these users are not administrator users and restricted users.

  When I need to install a program in any of these workstations, I need to disconnect the user restucted and the journal as an administrator user.  When installation is finished, I can run this program from the administrator user but when I closing session and connection for users user restruct I can not run this program and an error.

  My question is: How can I use this program with the user of gods?

  Thank you

  You would be better that tag on your workstation
  Windows Server - how to configure the group policy in windows server 2003 to remove the start in the start menu to xp pro user Expert MowGreen Windows IT Pro - consumer safety

• Need help for JO HP 8500 all in one printer on home network OS Windows 2003 server a.

  I have a new HP OJ 8500 has everything in a printer connected wireless to my local network.  I have internet access using the printer, can access the printer using a wireless iPod and can see the printer on the Modem / Router using Windows Explorer using the computer with the Windows 2003 Server operating system.  However, I can't access the printer using "Add a printer" in Server 2003.  In addition, the disc that came with the printer does not load printer installation information.  The message was "printer not supported using this operating system.  Help will be greatly appreciated!

  Hi mwcuff,

  There is no driver for Win Server 2003. The only thing I can suggest is to make an addition, a printer and refer them to the CD that came with the printer to see if it will load a basic driver.

• M70-159: need graphic driver for Windows 2003 Server

  Can someone tell me wheather I can install windows 2003 server to series M70-159 .
  I am trying to download driver for sound card and many other cards, but I'm not able to get one for windows 2003

  Hello

  AFAIK, this device was shipped only with Windows Xp. In this case only the driver for this OS are available.
  Windows 2003 server edition is not a common operating system, and unfortunately, I do not know if you will find anywhere the right Toshiba drivers for this operating system of m.

  Good bye

• RAID drivers that support Windows 2003 server for Qosmio G30 - 153

  Hello
  Where can I find RAID drivers that support Windows 2003 server for Qosmio G-series(G30-153)
  Thanks in advance.
  Haquette

  Hello

  Windows Server 2003 must support the XP drivers.
  Then, try to search RAID XP drivers!

  cordially :)

• can I install Windows 2003 server in my computer hp laptop pav14-v021tu

  Hai

  My system came with windows 8, when I bought.

  But now I thing I finstalling windows server 2003 in this laptop, I heard from my local technician some computers laptops hp does not support Server 2003 (he said need some drivers from hard disk sata hard or something like that)

  As I have not super-hotel with this stuff,

  some we can't so please say argues this model the windows sever 2003 if so this laptop has no other than the Server 2003 addinational drivers to work

  Thank you

  Hello:

  The technician is correct on the sata drivers are needed.

  The problem is that your laptop is an Intel 4th generation of processor and chipset of the 8 series.

  Intel develops not all drivers sata for this chipset, so windows XP and 2003 server will not install on the PC with this chipset.  Nor are there at - he graphics drivers for Windows 2003 server, and probably many other features would not have driver support for hardware that your PC has.