Installation of Oracle 11 g on a client in the same network as another implementation may cause problems?

Similar Questions

• Setup error ODAC 12 c R4 client on the same machine with Oracle 11 g 64 bit for Windows database

  I have Oracle objects and mobile application development with:

  Windows 7 64-bit OS

  Base Oracle = C:\ORA

  Database Oracle 11 g 64-bit 201, home = C:\ORA\DB11G201

  I was running in Visual Studio 2010 and the ODAC customer Oracle 32-bit in another home = C:\ORA\DB11G201CLIENT32

  All was well for a few years on that set up.

  I decided to upgrade to Visual Studio 2013 and .NET 4.5

  Deletion of Visual Studio 2010 and installed Visual Studio 2013.

  I did a normal uninstall of the Oracle 11 g 32-bit client using the rebooted, Oracle Universal Installer.

  The customer old house was gone.

  I downloaded the ODP.NET12C 32-bit Oracle with VS tools R4 and began the installation of the client.

  I selected English and built-in OS account

  I chose Oracle base = C:\ORA

  I chose hone Oracle = C:\ORA\DB12CR4CIENT32

  But I encounter the error:

  [INS-32104] User Oracle Home specified is not the owner of the Oracle Base specified.

  The owner of C:\ORA's ADMINISTRATORS.

  When should I do?

  For guests of 12 c, opened a NEW BASE and a NEW HOUSE?

  Created an ACCOUNT to STANDARD USER and the select statement, but keep c:\ORA and the new C:\ORA\DB12CR4CIENT32 of the House?

  I'm a hold out for migration to Oracle 12 c database because they thrown into the very useful tool Oracle Database Control and replaced by something watered down.

  So I like to keep the Oracle 11 g 64-bit database.

  but Visual Studio 2013 support, use the 12 c R4 32-bit and 64-bit support drivers unmanaged.

  I would use (and use) Managed drivers, but they do not work in database 11g FIPS-140 active environments.

  Thank you for your help and comments.

  Hello

  This is expected because you install 12 c in Base Oracle who has home 11g.

  From 12 c, the installation program has promoted "Oracle Home User' where you can perform the installation with built-in admin user or a secure non-admin user.

  As documented at https://docs.oracle.com/database/121/NTCLI/install.htm#NTCLI1283

  "Oracle 12 c Release 1 (12,1) database client may not share basic Oracle with houses of the Oracle database versions, such as Oracle Database 11 g Release 2 (11.2) and sooner."

  Please see the information listed in the link above for more information.

  Bascially, you need to install in a different Oracle Base and can have all this work.

  Kind regards.

• Windows IPSEC and SSL VPN client on the same machine

  Matches (coexistence) installation of IPSEC and SSL vpn clients that are supported on the same computer, windows (XP and Win7)?

  As mentioned by Patricia and Jennifer (5 stars), you can install two clients on the same machine without any problem.

  The tricky part comes when you are trying to connect two clients at the same time, that's when you may encounter unexpected problems.

  However, if your intention is to install both clients and connect them individually and not at the same time, you'll be fine.

  If you have any other questions, please mark this question as answered and note all messages that you have found useful.

  Thank you.

  Portu.

  Post edited by: Javier Portuguez

• Install the MDW and the mobile client on the same platform

  Hi all

  We implement our 11g Oracle Database Server from Mobile environment and I was confused about something I read in the Release Notes (http://docs.oracle.com/cd/E22663_01/doc.11100/e22675.pdf).  In section 3.2 says 'do not install MDW and the mobile client on the same platform.'  Did mean really say 'platform' or does really do not install the MDW and the mobile client on the same device?  We are a store of Windows 100% - the mobile server is installed on a Windows Server machine, we plan to develop with Workbench Mobile database (GMD) on a Windows 7 desktop PC, and we intend to run the client mobile Windows 7 tablets. The Release Notes say that I can't do this?

  Yes - the way it is written is a bit confusing.    We will correct it in the next version of doc.    What we were trying to say, is do not install them on the same system.    Thank you for this comment.

  Kind regards

  Mike

• Oracle 11G and application server installed on the same server

  What are the advantages and disadvantages installation of Oracle 11 G database and Oracle (forms and reports) application server on the same server?
  
  Thank you in advance, Sonya

  Some people might want their data in an area of separate network for security reasons.
  It also depends on if it is the same people who do maintenance on db and appserver.

  It is at a lower cost with a single server and only 1 Os to implement.

• When I start elements 13 thought that an update is available.  I told it to install.  It behaves as if the installation.  I close/close, but whenever I restart the same thing happens.  What gives?

  When I start elements 13 thought that an update is available.  I told it to install.  It behaves as if the installation.  I close/close, but whenever I restart the same thing happens.  What gives?

  You probably need to update the AAM application. See this link:

  Update appears several times

• server-side and client on the same form-side code

  I CFINPUT text on the form and the form displays the control on the form when I use the preview browser.

  As long as I have CF tag which is the code on the server side that have no controls on the form.

  I thinkg I missed something when I have both control code and the server of the client on the same form.

  I would like to know how I can show the controls on the form and the CF tag for code running on the server side.

  For example, I have a user name and password text box on the form.

  I need to validate the information user and need of a stored procedure that is executed when the user clicks on the "connect" button.

  I have 2 text boxes on the form and it works.

  As soon as I have the CFSTOREDPROC tag then the shape does not shows the controls.

  It seems the form to run sider server code, but client side of the code does not run.

  Your information and help is much appreciated,

  Kind regards

  Iccsi,

  The form action attribute points to a different file or the same file? If it is different then you can not see the controls because it refers to another file (action file). If this is the same file, then it might have a logic that prevents the form to display after the form submission.

  It would be useful to join the code. So, we could myself or others help you better.

• Server-side and client to the same shape-side code

  I CFINPUT text on the form and the form displays the control on the form when I use the preview browser.

  As long as I have CF tag which is the code on the server side that have no controls on the form.

  I thinkg I missed something when I have both control code and the server of the client on the same form.

  I would like to know how I can show the controls on the form and the CF tag for code running on the server side.

  For example, I have a user name and password text box on the form.

  I need to validate the information user and need of a stored procedure that is executed when the user clicks on the "connect" button.

  I have 2 text boxes on the form and it works.

  As soon as I have the CFSTOREDPROC tag then the shape does not shows the controls.

  It seems the form to run sider server code, but client side of the code does not run.

  Your information and help is much appreciated,

  Kind regards

  Iccsi,

  Thanks for the message and the help.

  I have a fault of typo on my sQL statement,

  Thanks again for help,

  Kind regards

  Iccsi

• Can you install Oracle 11 g 32 bit and 64 bit clients on the same machine AIX 6?

  We have a supplier who needs a 32-bit client on the application server which is AIX 6. We already have 11g 64 bit client installed there. So, we can install both or I am interested in a the first 64-bit client deinstall?

  Yes you can, please check the documentation: http://docs.oracle.com/cd/E11882_01/install.112/e24334/toc.htm#CHDIGJJB

  From Oracle Database 11 g Release 2 (11.2), the client software 64-bit does contain the binary 32 bits client. If you need the 32-bit client binaries on 64-bit platforms, then install the 32-bit binaries from the 32-bit respective client software in a separate Oracle home.

• Dblink Oracle to sql server, multiple database on the same server sql under a dblink

  Hi, we managed to set up an Oracle dblink to sql server and retrieve data.

  The user of sql server have been using via dblink has access to multiple databases on the same sql server

  But the question is how in oracle (if possible) prepend you the SQL access to this?

  For example:

  Sqlserver_prod has the user sqlserver_user which seems to be set up as default database sqlserver_db1

  But we have select access to sqlserver_db2

  all work well as sqlserver_user

  Select * from table_fromdb1

  Select * from dbo.table_fromdb1

  Select * from sqlserver_db1.dbo.table_fromdb1

  as does

  Select * from sqlserver_db2.dbo.table_fromdb2

  more in Oracle

  Oracle_db a dblink sqlserver_prod. World connection sqlserver_user

  everything works fine

  Select * from 'table_fromdb1"@sqlserver_prod '.

  Select * from 'dbo '. "table_fromdb1"@sqlserver_prod

  But how to (if possible) access from oracle

  sqlserver_db2.dbo.table_fromdb2

  without having to create a new sqlserver_db2_user referenced in a new dblink

  If oracle for oracle would be

  Select * from remote_oracle_schema.table@remote_oracle_db

  Hello

  You cannot select a table in a different SQL * database server from that to which the gateway instance connects.
  As stated in the documentation-

  Oracle® database gateway

  Installation and Configuration Guide

  11g Release 2 (11.2) for AIX 5 L Based Systems (64-bit), HP - UX

  Itanium, Solaris (SPARC 64-Bit), Linux x 86 operating system,

  and Linux x 86-64

  In the section.

  The example SQL Server multiple databases: Configuration of the modem router

  A separate instance of the gateway that is required for each SQL Server database. Each

  instance needs its own Gateway system ID (SID).

  ==========

  You will need to create a new instance of the gateway for the SQL * Server DB2 as well as a link separate db.

  Kind regards

  Mike

• Installation of Win 7 on a new PC with the same S/N

  I have to let go to old and outdated laptop.

  I want to install the same copy of Win 7 on a new laptop without OS and I would use the already purchased license win 7.

  My question: given that I will never use this old computer again, or any of its parts, can I use the same number and activate successfully win 7 after the installation of the new computer without having to pay for a new license? I would like to know before you start to install the operating system. Thank you.

  If it's full details you can clean reinstall Windows 7 on a new PC and it should be active with the product key.

  Otherwise cool activation by opening an high, command prompt

  type slui 4

  Press enter

  Follow the prompts to activate by phone

  If it fails, stay on the line to explain to the officer that you do.

• Allowing the VPN Clients to the management network - nat woes

  Try to allow the VPNClient IPSEC access to the management network.  packet trace stops on the vpn encrypt even through phase 7 States it's NAT EXEMPT, he said his tent still NAT by a static.  The only thing I can think to put a rule of nat exempted for the subnet on the external interface.

  Please notify.  Thank you.

  Phase: 1
  Type: ACCESS-LIST
  Subtype:
  Result: ALLOW
  Config:
  Implicit rule
  Additional information:
  MAC access list

  Phase: 2
  Type: FLOW-SEARCH
  Subtype:
  Result: ALLOW
  Config:
  Additional information:
  Not found no corresponding stream, creating a new stream

  Phase: 3
  Type:-ROUTE SEARCH
  Subtype: entry
  Result: ALLOW
  Config:
  Additional information:
  in 0.0.0.0 0.0.0.0 outdoors

  Phase: 4
  Type: ACCESS-LIST
  Subtype: Journal
  Result: ALLOW
  Config:
  Access-group MANAGEMENT-IN in the management interface
  access-list MANAGEMENT-IN-scope ip allowed any one
  Additional information:

  Phase: 5
  Type: IP-OPTIONS
  Subtype:
  Result: ALLOW
  Config:
  Additional information:

  Phase: 6
  Type: FOVER
  Subtype: Eve-updated
  Result: ALLOW
  Config:
  Additional information:

  Phase: 7
  Type: NAT-FREE
  Subtype:
  Result: ALLOW
  Config:
  match ip MANAGEMENT 10.10.10.0 255.255.255.0 outside 172.18.0.32 255.255.255.240
  Exempt from NAT
  translate_hits = 3, untranslate_hits = 33
  Additional information:

  Phase: 8
  Type: NAT
  Subtype:
  Result: ALLOW
  Config:
  static (MANAGEMENT, outside) 203.23.23.75 10.10.10.10 netmask 255.255.255.255
  MANAGEMENT ip 10.10.10.10 host game OUTSIDE of any
  static translation at 203.23.176.75
  translate_hits = 0, untranslate_hits = 1
  Additional information:

  Phase: 9
  Type: NAT
  Subtype: host-limits
  Result: ALLOW
  Config:
  static (MANAGEMENT, outside) 203.23.23.75 10.10.10.10 netmask 255.255.255.255
  MANAGEMENT ip 10.10.10.10 host game OUTSIDE of any
  static translation at 203.23.23.75
  translate_hits = 0, untranslate_hits = 1
  Additional information:

  Phase: 10
  Type: VPN
  Subtype: encrypt
  Result: DECLINE
  Config:
  Additional information:

  Result:
  input interface: MANAGEMENT
  entry status: to the top
  entry-line-status: to the top
  output interface: OUTSIDE
  the status of the output: to the top
  output-line-status: to the top
  Action: drop
  Drop-reason: flow (acl-drop) is denied by the configured rule

  -EXCERPT FROM CONFIG-

  CorpVPN to access extended list ip 10.10.10.0 allow 255.255.255.0 172.18.0.32 255.255.255.240
  Access extensive list ip 172.18.0.32 CorpVPN allow 255.255.255.240 10.10.10.0 255.255.255.0

  mask 172.18.0.33 - 172.18.0.46 255.255.255.240 IP local pool CorpVPN

  access-list MANAGEMENT-extended permitted tcp 172.18.0.32 255.255.255.240 host 10.10.10.11 eq ssh
  access-list MANAGEMENT-extended permitted tcp 172.18.0.32 255.255.255.240 host 10.10.10.10 eq ssh
  access-list MANAGEMENT-extended permitted tcp 172.18.0.32 255.255.255.240 host 10.10.10.13 eq 3389

  access-list 101 extended allow ip 10.10.10.0 255.255.255.0 172.18.0.32 255.255.255.240

  NAT 0 access-list (MANAGEMENT) No.-NAT-DU-MGMT
  access-list no.-NAT-DU-MGMT scope ip 10.10.10.0 allow 255.255.255.0 172.18.0.32 255.255.255.240

  CorpVPN to access extended list ip 10.10.10.0 allow 255.255.255.0 172.18.0.32 255.255.255.240
  Access extensive list ip 172.18.0.32 CorpVPN allow 255.255.255.240 all

  internal CorpVPN group strategy
  attributes of Group Policy CorpVPN
  value of server DNS 203.23.23.23
  VPN - connections 8
  VPN-idle-timeout 720
  Protocol-tunnel-VPN IPSec l2tp ipsec
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list CorpVPN
  the address value CorpVPN pools

  type tunnel-group CorpVPN remote access
  attributes global-tunnel-group CorpVPN
  address pool CorpVPN
  Group Policy - by default-CorpVPN
  IPSec-attributes tunnel-group CorpVPN
  pre-shared key

  First of all, there is overlap crypto ACL with the VPN static L2L:

  crypto ASA1MAP 10 card matches the address 101

  access-list 101 extended allow ip 10.10.10.0 255.255.255.0 172.18.0.32 255.255.255.240
  access-list 101 extended allow ip 172.18.0.32 255.255.255.240 10.10.10.0 255.255.255.0

  I would remove the 2 lines of ACL 101 above because it is incorrect.

  Secondly, from the output of ' cry ipsec to show his ", you seem to be getting the ip address of the"jdv1.australis.net.au", not"CorpVPN"pool pool. Therefore, the No. NAT ACL on the management interface is incorrect. I would just add a greater variety of education no. NAT so that it covers all your ip pool:

  access-list no.-NAT-DU-MGMT scope ip 10.10.10.0 allow 255.255.255.0 172.18.0.0 255.255.255.0

  Thirdly, even with your dynamic ACL 'OUTSIDE_cryptomap_65535.65535' crypto map, it only covers the 172.18.0.32/28, so I just want to add a wider range since it seems you get the ip address of the different pool:

  OUTSIDE_cryptomap_65535.65535 list of allowed ip extended access all 172.18.0.0 255.255.255.0

  Then I would disable the following group of access for purposes of test first:

  no access-group MANAGEMENT - OUT Interface MANAGEMENT

  Finally, please clear all the SA on your ASA and xlate, then reconnect to your vpn client and test it again:

  delete the ipsec cry his

  clear the isa cry his

  clear xlate

  Please let us know how it goes after the changes. If it still doesn't work, please please send again the last configuration and also to send the output of the following:

  See the isa scream his

  See the ipsec scream his

  and a screenshot of the page of statistics on your vpn client. Thank you.

• Site-to-site and VPN Client on the same interface

  Hello

  Maybe it's a simple qeustion, and I also know it can be done on a SAA.

  But is it possible to have ipsec-l2l tunnels and external client ipsec VPN on the same interface on a router? If so someone can give me a link on how to do it because I can't find 1.

  Thank you

  Here you go:

  http://www.Cisco.com/en/us/products/ps5855/products_configuration_example09186a00809c7171.shtml

  Hope that helps.

• Publish two different clients with the same ID Adobe DPS publications

  Hello:

  I have a publication about InDesign and I downloaded the Adobe server with my Adobe DPS account. For the first publication, I published the publication with the producer of Folio on the portal digitalpublishing, and then I created the application using the Adobe viewer generator. Then I tried locally on my iPad. It was working fine and I could see my publication.

  Now, I need to download a new publication for another customer with the same Adobe DPS account and I need to create a different application with the new client look and feel, but I don't want to show this new application, only the last was first published.

  In a nushell, I need to keep separate two publications (or more) when they are published if I use the same account of DPS... Is this possible?

  Cordial greetings,

  Hi Leo,

  Each title should have its own publication AdobeID (a title may contain several editions / folios).

  The question for each title, you want to work on an account supplied with Adobe. Make sure that you have configured the corresponding emailaddress / emailalias. For example [email protected] and [email protected]

  Once the accounts have been implemented, you can:

  * Download and organize several folios for this publication in the corresponding Folio producer

  * Create a visualizer with your Builder Viewer and on the first page provide the AdobeID for publication to give

  You can ask new accounts of publication any time, and these are included in your subscription DPS.

  During your first obtained account Provisioning, you should have received an excel document to ask the commissioning for various publications. In this document, you can list the accounts you want to use for publications, individual users of the generator system and Viewer access.

  With sincere friendships.

  KlaasJan Tukker

  Adobe Systems Benelux

• Oracle XE on multiple virtual machines on the same physical machine?

  Hi people,
  
  Can I install Oracle XE on several virtual machines that are on the same physical machine?
  
  Thank you
  
  G. grangier

  I find that this interpretation is questionable.
  Instance, what do mean?
  What they mean by server?
  Unless Oracle explicitly forbids the execution of several databases of XE on different virtual machines at the same time, I don't see violations.

  For example, imagine that the user has runs that XE on AWS and user B running an another XE on AWS.
  They are not running on the same "Server"?

  Flavio
  ----

  http://oraclequirks.blogspot.com